Novel heat spreader coatings for high power electronic devices
Source abstract
Abstract
A new set of heat spreader coatings consisting of multilayers of diamond/AlN/diamond were deposited on high heat capacity substrates of molybdenum and silicon nitride. Bonding of the heat spreaders to the device wafers using gold-tin eutectic solder was carried out after metallization layers of titanium, gold and copper were deposited on diamond. Prior to bonding, backside of the silicon wafers was also metallized with titanium, gold and copper and the gallium arsenide wafers with titanium, copper-germanium alloy and gold. Characterization of the multilayer diamond films was carried out by Raman spectroscopy, X-ray diffraction and scanning electron microscopy. The bonded wafers were tested for adhesion strength, resistance against peeling due to thermal cycling and failure under stress. Further, the bonded regions were characterized by scanning electron microscopy, energy dispersive spectroscopy and X-ray mapping of different elements. The heat spreader characteristics of the single layer diamond and the multilayer diamond substrates were tested by infrared imaging. The results illustrate that the multilayer diamond heat spreader coatings provide better heat dissipation and also possess better adhesion strength and resistance against peeling under thermal cycling. These novel multilayer diamond/AlN/diamond heat spreaders are expected to considerably improve the life of high frequency power devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Engineering Applied Research · Brake Systems and Friction Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. O. M. KUTTEL, E. SCHALLER, J. OSTERWALDER and L. SCHLAPBACH, Diamond Related Materials 4 (1995) 612.10.1016/0925-9635(94)05216-6 ↗
2. P. J. BOUDREAUX, in Applications of Diamond Films and Related Materials: 3rd Int. Conf., edited by A. Feldman et al., NIST Special Publication 885 (NIST, Washington, DC, 1995).
3. S. ASHLEY, Mech. Engng. 112 (1990) 54.
4. W. BEHR and J. F. LUY, IEEE Electron Device Lett. 11 (1990) 206.10.1109/55.55251 ↗
5. H. UKITA, H. NAKADA and T. ABE, Jpn. J. Appl. Phys. 31 (1992) 524.10.1143/JJAP.31.524 ↗
6. G. LU and L. K. BIGELOW, Diamond Related Materials 1 (1992) 34.
7. J. E. GRAEBNER and S. JIN, J. Metals 50 (1998) 52.
8. K. E. GOODSON, in ASME/JSME Thermal Engineering Conference, 1995, Vol. 4, p. 183.
9. J. H. HARRIS, J. Metals 50 (1998) 56.
10. R. D. COTTLE, X. CHEN, R. K. JAIN, Z. ELIEZER, L. RABENBERG and M. E. FINE, ibid. 50 (1998) 66.
11. H. MAVOORI and S. JIN, ibid. 50 (1998) 70.
12. C. ZWEBEN, ibid. 50 (1998) 47.
13. K. JAGANNADHAM, Solid State Electronics 42 (1998) 2199.10.1016/S0038-1101(98)00216-0 ↗
14. K. JAGANNADHAM, A. J. SHARMA, Q. WEI, R. KALYANARAMAN and J. NARAYAN, J. Vac. Sci. Tech. 16A (1998) 2804.10.1116/1.581425 ↗
15. K. K. DAS, in “Diamond Films and Coatings,” edited by R. F. Davis (Noyes Publications, Park Ridge, NJ, 1993) Ch. 8, p. 381.
16. B. LU and R. HAUBNER, in “Diamond and Diamond-like Films and Coatings,” edited by R. E. Clausing et al., NATO-ASI Series B: Physics Vol. 266 (Plenum, New York), p. 579.
17. T. R. WATKINS, A. MCGINNIS and K. JAGANNADHAM, in Proc. Advances in X-ray Analysis, Denver, Colorado, 1997.
18. K. JAGANNADHAM, W. D. FAN, R. B. DINWIDDIE and J. NARAYAN, in Symp. Proc. MRS Society, Boston, 1997, Vol. 445, p. 51.
19. W. D. FAN, K. JAGANNADHAM and J. NARAYAN, in Symp. Proc. MRS Society, Boston, 1995, Vol. 356, p. 847.
20. K. JAGANNADHAM, J. Vac. Sci. Tech. 17A (1999) 373.10.1116/1.581597 ↗
21. C. J. MORATH, H. J. MARIS, J. J. CUOMO, D. L. PAPPAS, A. GRILL, V. V. PATEL, J. P. DOYLE and K. L. SAENGER, J. Appl. Phys. 76 (1994) 2636.10.1063/1.357560 ↗