journal article·2005-08

Using granite rejects to aid densification and improve mechanical properties of alumina bodies

W. Acchar, E. G. Ramalho, Y. A. Fonseca, D. Hotza, A. M. Segadães

Journal of Materials Science· Volume 40· Issue 15
Publisher page

Abstract

The industrial use of waste materials in the ceramic industry has been widely investigated. This work describes the research carried out on the manufacturing of alumina bodies with granite reject additions. The reject was used as produced by a local industry that saws granite stones into blocks and slabs. This industrial process produces a significant amount of that reject, which is discarded in sedimentation lagoons, landfill areas or simply thrown in rivers, resulting in environmental pollution. Alumina and the granite reject were ball-mill mixed with 5 wt% manganese oxide and pressed under an uniaxial load of 20 MPa. Samples were subjected to thermal analysis (DTA, TG and dilatometry) and sintered in air at 1300 and 1350∘C during 1 h in an electric furnace. Sintered specimens were characterized by X-ray diffraction, apparent density, open porosity and flexural strength. The results showed that the addition of granite reject and manganese oxide enables low temperature sintering and remarkably improves (~300%) the cold mechanical properties of the alumina body.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production · Nuclear materials and radiation effects

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. W. H. GITZEN, in “Alumina as a Ceramic Material”, (The American Ceramic Society, Columbus, Ohio, 1970).
2. E. DOERRE and H. HUEBNER, in “Alumina: Processing and Applications”, (Springer, Berlin, 1984).10.1007/978-3-642-82304-6 ↗
3. R. J. BROOK, S. P. HOWLETT and SU XING WU, in: “Sintering – Theory and Practice”, (Elsevier, The Netherlands, 1982).
4. R. J. BROOK, Am. Ceram. Soc. Bull 64 (1985) 1344.
5. H. P. CAHOON and C. J. CHRISTENSEN, ibid. 39 (1956) 337.10.1111/j.1151-2916.1956.tb15599.x ↗
6. R. L. COBLE, J. Appl. Phys 32 (1961) 793.10.1063/1.1736108 ↗
7. I. B. CUTLER, C. BRADSHAW, C. J. CHRISTENSEN and E. P. HYATT, J. Am. Ceram. Soc. 40 (1957) 134.10.1111/j.1151-2916.1957.tb12589.x ↗
8. R. J. BROOK, E. GILBART, N. J. SHAW and U. EISELE, Powder Metall. 28 (1985) 105.10.1179/pom.1985.28.2.105 ↗
9. M. HARMER, E. W. ROBERTS and R. J. BROOK, Trans. J. Br. Ceram. Soc. 78 (1979) 22.
10. N. J. SHAW and R. J. BROOK, J. Am. Ceram. Soc. 69 (1986) 107.10.1111/j.1151-2916.1986.tb04711.x ↗
11. R. D. BAGLEY, I. B. CUTLER and D. L. JOHNSON, ibid. 53 (1970) 136.10.1111/j.1151-2916.1970.tb12055.x ↗
12. W. R. RAO and I. B. CUTLER, ibid. 56 (1973) 588.10.1111/j.1151-2916.1973.tb12422.x ↗
13. L. A. XUE and I. W. CHEN, ibid. 74 (1991) 2011.10.1111/j.1151-2916.1991.tb07825.x ↗
14. H. ERKALFA, Z. MISIRLI and T. BAYKARA, Ceram. Int. 24 (1998) 81.10.1016/S0272-8842(97)00082-5 ↗
15. R. M. R. PASOTTI, A. H. A. BRESSIANI and J. C. BRESSIANI, Int. J. Refractory Metals Hard Mater. 16 (1998) 423.10.1016/S0263-4368(98)00053-5 ↗
16. T. HIRATA, K. AKIYAMA and H. YAMAMOTO, J. Eur. Ceram. Soc. 20 (2000) 195.10.1016/S0955-2219(99)00161-2 ↗
17. W. ACCHAR, D. SCHWARZE and P. GREIL, Mater. Sci. Eng. A351 (2003) 299.10.1016/S0921-5093(02)00857-2 ↗
18. M. SATHIYAKUMAR and F. D. GNANAM, Ceram. Int. 29 (2003) 869.10.1016/S0272-8842(03)00029-4 ↗
19. P. SVANCAREK, D. GALUSEK, C. CALVERT, F. LOUGHRAN, A. BROWN, R. BRYDSON and F. RILEY, J. Eur. Ceram. Soc. 24 (2004) 3453.10.1016/j.jeurceramsoc.2003.10.032 ↗
20. M. C. MOREIRA and A. M. SEGADÃES, ibid. 16 (1996) 1089.10.1016/0955-2219(96)00024-6 ↗
21. M. DONDI, M. MARSIGLI and B. FABBRI, Tile Brick Int. 13 (1997) 302.
22. M. S. H. CRESPO and J. M. RINCON, Ceram. Int. 27 (2001) 713.10.1016/S0272-8842(01)00025-6 ↗
23. P. PISCIELLA, S. CRISUCCI, A. KARAMANOV and M. PELINO, Waste Management 21 (2001) 1.10.1016/S0956-053X(00)00077-5 ↗
24. L. P. F. SOUZA and H. S. MANSUR, J. Mater. Proc. Tech. 145 (2004) 14.10.1016/S0924-0136(03)00857-4 ↗
25. S. N. MONTEIRO, L. A. PEÇANHA and C. M. F. VIEIRA, J. Eur. Ceram. Soc. 24 (2004) 2349.10.1016/S0955-2219(03)00638-1 ↗
26. F. R. PEREIRA, A. F. NUNES, A. M. SEGADÃES and J. A. LABRINCHA, Key Eng. Mater. 264–268 (2004) 1743.10.4028/www.scientific.net/KEM.264-268.1743 ↗
27. P. A. VESILIND, J. J. PEIRCE and R. F. WEINER, in “Environmental Engineering”, 3rd ed (Butterworth-Heinemann, Boston, 1994).