journal article·2007-05

Production of natural carotene-dispersed polymer microparticles by SEDS-PA co-precipitation

Wenzhi He, Quanling Suo, Hailong Hong, A Shan, Chunping Li, Yanchun Huang, Yunxia Li, Mingda Zhu

Journal of Materials Science· Volume 42· Issue 10
Publisher page

Abstract

In this work, composite microparticles of poly (ethylene glycol) (PEG) loaded with natural carotene were successfully produced using solution enhanced dispersion by supercritical fluids through prefilming atomization (SEDS-PA) process. The characteristics of dispersion of carotene in the polymeric drug carrier were analyzed by color difference between carotene and PEG using optical micrographs. The morphologies and particle sizes (PSs) of the composite microparticles were studied by SEM micrographs. The precipitates were amorphous particles of PEG embedded with flake-like natural carotene crystals. The carotene degradation of the carotene/PEG composite microparticles was substantially lessened under the protection of PEG carrier in comparison with that of carotene microparticles. With the increase of the carotene content added in solution, the PSs of carotene crystals dispersed into the PEG carrier increase, the carotene loading yields in the composite microparticles (Wc2) obviously increased, whereas PSs of these composite particles slightly decreased. Higher operating temperature resulted in formation of bigger coalesced composite particles and the substantial increase of Wc2. With increase of operating pressure PSs decreased, whereas no clear dependence of Wc2 was obtained on it.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Equilibria and Thermodynamics · Polymer Foaming and Composites · Subcritical and Supercritical Water Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Jung J, Perrut M (2001) J Supercrit Fluids 20:17910.1016/S0896-8446(01)00064-X ↗
2. Labhasetwar V, Song CX, Levy RJ (1997) Adv Drug Delivery Rev 24:6310.1016/S0169-409X(96)00483-8 ↗
3. Langer R (1990) Science 249:152710.1126/science.2218494 ↗
4. Elvassore N, Bertucco A, Caliceti P (2001) Ind Eng Chem Res 40:79510.1021/ie0004904 ↗
5. Reverchon E, Della porta G (2003) Chem Eng Technol 26:84010.1002/ceat.200300005 ↗
6. Debenedetti P, Tom JW, Yeo SD, Lim GB (1993) J Controlled Release 24:2710.1016/0168-3659(93)90166-3 ↗
7. Mishima K, Matsuyama K, Tanabe D, Yamauchi S (2000) AIChE J 46:85710.1002/aic.690460418 ↗
8. Matsuyama K, Mishima K, Hayashi KI, Ishikawa H, Matsuyama H, Harada T (2003) J Appl Polym Sci 89:74210.1002/app.12201 ↗
9. Gosselin PM, Thibert R, Preda M, Mcmullen JN (2003) Int J Pharm 252:22510.1016/S0378-5173(02)00649-X ↗
10. Benedetti L, Bertucco A, Pallado P (1997) Biotechnol Bioeng 53:23210.1002/(SICI)1097-0290(19970120)53:2<232::AID-BIT15>3.0.CO;2-M ↗
11. Yeo SD, Kim MS, Lee JC (2003) J Supercrit Fluids 25:14310.1016/S0896-8446(02)00094-3 ↗
12. Heater KJ, Tomasko DL (1998) J Supercrit Fluids 14:5510.1016/S0896-8446(98)00106-5 ↗
13. Liu ZM, Wang JQ, Song LP, Yang GY, Han BX (2002) J Supercrit Fluids 24:110.1016/S0896-8446(02)00007-4 ↗
14. Reverchon E, De Marco I, Caputo G, Della Porta G (2003) J Supercrit Fluids 26:110.1016/S0896-8446(02)00186-9 ↗
15. Reverchon E, De Marco I, Della Porta G (2002) J Supercrit Fluids 23:8110.1016/S0896-8446(01)00129-2 ↗
16. Sarkari M, Darrat I, Knutson BL (2000) AIChE J 46:185010.1002/aic.690460913 ↗
17. Ghaderi R, Artursson P, Carlfors J (1999) Pharm Res 16:67610.1023/A:1018868423309 ↗
18. York P (1995) Pharm Res 12:S141
19. Palakodaty S, York P, Pritchard J (1998) Pharm Res 15:183510.1023/A:1011949805156 ↗
20. Moshashaee S, Bisrat M, Forbes RT, Nyqvist H, York P (2000) Eur J Pharm Sci 11:23910.1016/S0928-0987(00)00108-1 ↗
21. Juppo AM, Boissier C, Khoo C (2003) Int J Pharm 250:38510.1016/S0378-5173(02)00577-X ↗
22. Ghaderi R, Artursson P, Carlfors J (2000) Eur J Pharm Sci 10:110.1016/S0928-0987(99)00079-2 ↗
23. Elvassore N, Bertucco A, Caliceti P (2001) J Pharm Sci 90:162810.1002/jps.1113 ↗
24. Tservistas M, Levy MS, Lo-Yim MYA, O’kennedy RD, York P, Humphrey GO, Hoare M (2001) Biotechnol Bioeng 72:1210.1002/1097-0290(20010105)72:1<12::AID-BIT2>3.0.CO;2-Z ↗
25. Wang Y, Dave RN, Pfeffer R (2004) J Supercrit Fluids 28:8510.1016/S0896-8446(03)00011-1 ↗
26. He WZ, Suo QL, Jiang ZH, A S, Hong HL (2004) J Supercrit Fluids 31:10110.1016/j.supflu.2004.01.009 ↗
27. Suo QL, He WZ, Huang YC, Li CP, Hong HL, Li YX, Zhu MD (2005) Powder Technol 154:11010.1016/j.powtec.2005.05.001 ↗
28. He WZ, Suo QL, Hong HL, Li GM, Zhao XH, Li CP, A S (2006) Ind Eng Chem Res 45:210810.1021/ie050993f ↗
29. GB8821-88 (The state standard of P. R. China)
30. Chiou JS, Barlow JW, Paul DR (1985) J Appl Polym Sci 30:2638
31. Wissinger RG, Paulaitis ME (1987) J Polym Sci: Part B Polym Phys 25:249710.1002/polb.1987.090251206 ↗
32. Sanders ES (1988) J Membr Sci 37:6310.1016/S0376-7388(00)85069-3 ↗
33. Reverchon E, Della Porta G, De Rosa I, Subra P, Letourneur D (2000) J Supercrit Fluids 18:23910.1016/S0896-8446(00)00069-3 ↗
34. Mukhopadhyay M (2003) J Supercrit Fluids 25:21310.1016/S0896-8446(02)00147-X ↗