journal article·2001-12Open access

Quasi-static and dynamic crushing of empty and foam-filled tubes

I. W. Hall, O. Ebil, M. Guden, C.-J. Yu

Journal of Materials Science· Volume 36· Issue 24

Abstract

Metallic foam-filled tubes and their empty counterparts have been tested at quasi-static and dynamic strain rates in order to determine their energy absorption capabilities. Data from the Split-Hopkinson Pressure Bar have been used to generate force vs. displacement curves that are somewhat analogous to pseudo-engineering stress-strain curves. Force balance calculations have also been made. These results indicate that, on an equal weight basis, foam-filled tubes offer greater energy absorption capability than empty tubes at quasi-static strain rates. However, the benefit of foam filling does not appear to be extended to strain rates of the order of 200–500 s−1. Force balance calculations are shown to have potential as a method for monitoring the crushing of metallic foams at high strain rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · High-Velocity Impact and Material Behavior · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. M. F. Ashby, A. G. Evans, N. A. Fleck, L. J. Gibson, J. W. Hutchinson and H. N. G. Wadley, “Metal Foams: A Design Guide” (Butterworth-Heinemann, Woburn, MA 2000).
2. M. Seitzburger, F. G. Rammerstorfer, H. P. Degischer and R. Gradinger, Acta Mechanica 125 (1997) 93.10.1007/BF01177301 ↗
3. S. Santosa and T. Wierzbicki, Comp. and Struct. 68 (1998) 343.10.1016/S0045-7949(98)00067-4 ↗
4. H. Zhao and G. Gary, Int. J. Impact. Eng. 21 (1998) 827.10.1016/S0734-743X(98)00034-7 ↗
5. C. Yu, H. Eifert, J. Banhart and J. Bmeister, Journal of Mat. Res. Innovat. 2 (1998) 181.10.1007/s100190050082 ↗
6. U. S. Lindholm, J. Mech. Phys. Solids 12 (1964) 317.10.1016/0022-5096(64)90028-6 ↗
7. M. GÜDEN and I. W. Hall, J. Mater. Sci. 33 (1998) 3285.10.1023/A:1013272910939 ↗
8. H. Zhao, G. Gary and J. R. Klepaczko, Int. J. Impact. Eng. 19 (1997) 319.10.1016/S0734-743X(96)00038-3 ↗
9. O. Sawas, S. N. Brar and R. A. Brockman, Exp. Mech. 38 (1998) 204.10.1007/BF02325744 ↗
10. G. T. Gray III, in “Methods in Materials Research” (Wiley, New York NY, 1997).
11. M. A Meyers, “Dynamic Behavior of Materials” (Wiley, New York, NY, 1994).10.1002/9780470172278 ↗
12. Z. Li and J. Lambros, Comp. Sci. & Tech. 59 (1999) 1097.10.1016/S0266-3538(98)00152-3 ↗
13. G. Ravichandran and G. Subhash, J. Amer. Ceram. Soc. 77 (1994) 263.10.1111/j.1151-2916.1994.tb06987.x ↗
14. F. HAN, Z. Zhu and J. Gao, Met. & Mat. Trans. A 29A (1998) 2497.10.1007/s11661-998-0221-z ↗
15. V. S. Deshpande and N. A. Fleck, Int. J. Impact. Eng. 24 (2000) 277.10.1016/S0734-743X(99)00153-0 ↗
16. S. Yadav, D. R. Chichili and K. T. Ramesh, Acta Metall. Mater. 43 (1995) 4453.10.1016/0956-7151(95)00123-D ↗
17. T. Mukai, H. Kanahashi, T. Miyoshi, M. Mabuchi, T. G. Nieh and K. Higashi, Scripta Mater. 40 (1999) 921.10.1016/S1359-6462(99)00038-X ↗
18. H. Zhao and G. Gary, J. Mech. Phys. Solids. 45 (1997) 1185.10.1016/S0022-5096(96)00117-2 ↗