journal article·2004-04

Microstructure, mechanical property and chemical property in Ni3Al-Ni3Ti-Ni3Nb-based multi-intermetallic alloys

K. Ohira, Y. Kaneno, T. Takasugi

Journal of Materials Science· Volume 39· Issue 7
Publisher page

Abstract

Microstructure, high-temperature compressive and tensile deformation, and corrosion property of multi-phase alloys based on Ni3Al-Ni3Ti-Ni3Nb pseudo-ternary alloy system were investigated. The microstructures of these alloys were largely dependent on alloy composition but independent of annealing temperature. Alloys composed of multi-phase microstructures of L12, D024 and D0a showed substantially enhanced compressive yield stress as well as a certain amount of compressive plasticity at whole temperature, while they did not show reasonable tensile elongation at whole temperature. Also, alloys composed of lamellar-like multi-phase microstructures are effective in enhancing compressive yield stress particularly at high temperature. Multi-phase alloys with low Nb contents have good corrosion resistance, especially in high concentration of sulfuric acid.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Material Properties and Applications · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. S. C. Huang and J. C. Chesnutt in “Intermetallic Compounds,” Vol. 2, Practice, edited by J. H. Westbrook and R. L. Fleischer (John Wiley and Sons, West Sussex, England, 1995) p. 73.
2. Y.-W. Kim J. Metals 41 (1989) 24.
3. D. P. Pope and S. S. Ezz Int. Mater. Rev. 29 (1984) 136.10.1179/imr.1984.29.1.136 ↗
4. N. S. Stoloff ibid. 34 (1989) 153.10.1179/imr.1989.34.1.153 ↗
5. M. Yamaguchi and Y. Umakoshi Prog. Mater. Sci. 34 (1990) 1.10.1016/0079-6425(90)90002-Q ↗
6. T. Suzuki, Y. Mishima and S. Miura ISIJ Int. 29 (1989) 1.10.2355/isijinternational.29.1 ↗
7. K. Hagihara, T. Nakano and Y. Umakoshi Mater. Res. Soc. Symp. Proc. 753 (2003) 357.
8. K. Hagihara, T. Nakano Acta Mater. 48 (2000) 1469.10.1016/S1359-6454(99)00447-4 ↗
9. T. NAKANO and Y. Umakoshi Acta Mater. 51 (2003) 2623.10.1016/S1359-6454(03)00060-0 ↗
10. P. Villars, A. Prince and H. Okamoto “Handbook of Ternary Alloy Phase Diagrams” (ASTM International, 1995) p. 4195.
11. P. Nash and W. W. Liang Metall. Trans. A 16 (1983) 319.10.1007/BF02814329 ↗
12. P. Villars, A. Prince and H. Okamoto “Handbook of Ternary Alloy Phase Diagrams” (ASTM International, 1995) p. 12805.
13. M. Yamanaka, C. Yamauchi, M. Takeyama and T. Matsuo CAMPISIJ 12 (1999) 47.
14. P. Villars, A. Prince and H. Okamoto “Handbook of Ternary Alloy Phase Diagrams” (ASTM International, 1995) p. 4118.
15. M. Ghanem, N. Miura, T. Ueyama, M. Takeyama and T. Mastsuo Collected Abstract of 1997 Fall Meeting of Japan Inst. Metals, p. 388.
16. K. Tomihisa, Y. Kaneno and T. Takasugi Intermetallics 10 (2002) 247.10.1016/S0966-9795(01)00131-5 ↗
17. O. Noguchi, Y. Oya and T. Suzuki Metall. Trans. A 12 (1981) 1647.10.1007/BF02643570 ↗
18. T. Takasugi, H. Kawai and Y. Kaneno Mater. Sci. Eng. A 329–331 (2002) 446.10.1016/S0921-5093(01)01619-7 ↗