Microstructural evolution of Hi-NicalonTM SiC fibers annealed and crept in various oxygen partial pressure atmospheres
Source abstract
Abstract
It is expected that in the future SiC fiber-reinforced ceramic-matrix composites (CMCs) will be used in high temperature and hostile environments. In this study, Hi-NicalonTM SiC fibers were annealed and crept at 1500 °C for 1 hour in air, an argon flow and an ultra high-purity argon flow in order to investigate the effects of atmospheres and load conditions on the decomposition behavior and microstructural evolution of the fibers. After the fibers were annealed and crept in air, a silica layer with cracks was formed on the fiber surface. Under the creep load, the silica layer became thicker and porous due to the oxidation mechanism change from diffusion of ionic oxygen to transportation of oxygen molecules. An oxygen-enriched amorphous layer was formed at the fiber surface in the case of annealing in an argon flow, whereas SiC crystals were produced by the gas-phase reaction on the fiber surface when the fiber was crept in an argon flow. In an ultra high-purity argon flow, SiC crystals grew on the surface of both annealed and crept fibers. Growth of β-SiC grain was enhanced under low oxygen partial pressure atmospheres and creep load.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. S. Yajima, J. Hayashi and M. Omori, Chem. Lett. 9 (1975) 931.10.1246/cl.1975.931 ↗
2. J. Hayashi and M. Omori Idem., ibid. 10 (1976) 551.10.1246/cl.1976.551 ↗
3. T. Mah, N. L. Hecht, D. E. Mccullum, J. R. Heonigman, H. M. Kim, A. P. Katz and H. A. Lipsitt, J. Mater. Sci. 19 (1984) 1191.10.1007/BF01120029 ↗
4. S. M. Johnson, R. D. Brittain, R. H. Lamoreaux and D. J. Rowcliffe, J. Amer. Ceram. Soc. 71 (1988) C132.
5. D. J. Pysher, K. C. Goretta, R. S. Hodder and R. E. Tressler, ibid. 72 (1989) 284.10.1111/j.1151-2916.1989.tb06115.x ↗
6. T. Shimoo, M. Sugimoto and K. Okamura, J. Jap. Inst. Metals 54 (1990) 802.10.2320/jinstmet1952.54.7_802 ↗
7. T. Shimoo, H. M. Chen and K. Okamura, J. Ceram. Soc. Japan 100 (1992) 48.10.2109/jcersj.100.48 ↗
8. K. Okamura, Composites 18 (1987) 107.10.1016/0010-4361(87)90489-7 ↗
9. M. Takeda, Y. Imai, H. Ichikawa, T. Seguchi and K. Okamura, Ceram. Eng. Sci. Proc. 12 (1991) 1007.10.1002/9780470313831.ch7 ↗
10. Y. Imai, H. Ichikawa, T. Seguchi and K. Okamura Idem., ibid. 13 (1992) 209.10.1002/9780470313954.ch23 ↗
11. T. Shimoo, T. Hayastu, M. Narisawa, M. Takeda, H. Ichikawa, T. Seguchi and K. Okamura, J. Ceram. Soc. Japan. 101 (1993) 1379.10.2109/jcersj.101.1379 ↗
12. G. Chollon, R. Pailler, R. Naslain, F. Laanani, M. Monthioux and P. Olry, J. Mater. Sci. 32 (1997) 327.10.1023/A:1018541030308 ↗
13. T. Shimoo, I. Tsukada, T. Seguchi and K. Okamura, J. Amer. Ceram. Soc. 81 (1998) 2109.10.1111/j.1151-2916.1998.tb02593.x ↗
14. R. Bodet, X. Bourrat, J. Lamon and R. Naslain, J. Mater. Sci. 30 (1995) 661.10.1007/BF00356326 ↗
15. N. Hochet, M. H. Berger and A. R. Bunsell, J. Microsc. 185 (1997) 243.10.1046/j.1365-2818.1997.d01-620.x ↗
16. K. L. Luthra, J. Amer. Ceram. Soc. 69 (1988) C-231.
17. V. Pareek and D. A. Shores, ibid. 74 (1991) 556.10.1111/j.1151-2916.1991.tb04059.x ↗
18. J. A. Costello and R. E. Tressler, ibid. 69 (1986) 674.10.1111/j.1151-2916.1986.tb07470.x ↗
19. E. A. Gulbransen and S. A. Jansson, Oxid. Of Met. 4 (1972) 181.10.1007/BF00613092 ↗