journal article·2001-02

Atomic force microscope studies of stainless steel: Surface morphology and colloidal particle adhesion

W. R. Bowen, R. W. Lovitt, C. J. Wright

Journal of Materials Science· Volume 36· Issue 3
Publisher page

Abstract

An atomic force microscope has been used to image four commercial stainless steel samples of widely differing surface finishes. Analysis of the images allowed quantification of surface roughness over different area scales, 50 × 50 μm, 10 × 10 μm and 1 × 1 μm. The atomic force microscope was also used to measure directly the adhesion of a single polymer latex particle (radius ∼5 μm) to the surface in solution using the colloid probe technique. It was found that the adhesion increased with decreasing roughness, except for the smoothest surface which exhibited very regular surface features on the area scale most relevant to adhesion of the particle (1 × 1 μm). There was a good correlation between the variability of adhesion over each surface and the corresponding variability in surface roughness. Measurements of this type should prove useful in the technical/economic choice of surface finish for a particular purpose. As the colloid probe has dimensions comparable to those of bacteria and yeast cells, such measurements should especially be of value in the selection of surface finish likely to minimise bioadhesion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Force Microscopy Techniques and Applications · Adhesion, Friction, and Surface Interactions · Near-Field Optical Microscopy

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. J. Y. Walz, Adv. Colloid Interface Sci. 74 (1998) 119.10.1016/S0001-8686(97)00042-0 ↗
2. G. Binnig, C. F. Quate and Ch. Gerber, Phys. Rev. Lett 56 (1996) 930.10.1103/PhysRevLett.56.930 ↗
3. W. A. Ducker, T. J. Senden and R. M. Pashley, Langmuir 8 (1992) 1831.10.1021/la00043a024 ↗
4. D. T. Atkins and R. M. Pashley, Ibid. 9 (1993) 2232.10.1021/la00032a054 ↗
5. H-J. Butt, M. Jaschke and W. Ducker, Bioelectrochemistry Bioenergetics 38 (1995) 191.10.1016/0302-4598(95)01800-T ↗
6. S. Veeramasunei, M. R. Yalamanchili and J. D. Miller, J. Colloid Interface Sci. 184 (1996) 594.10.1006/jcis.1996.0656 ↗
7. G. Toikka, R. A. Hayes and J. Ralston, Ibid. 180 (1996) 329.10.1006/jcis.1996.0311 ↗
8. M. Pierce, J. Stuart, A. Pungor, P. Dryden and V. Hlady, Langmuir 10 (1994) 3217.10.1021/la00021a053 ↗
9. W. R. Bowen, N. Hilal, R. W. Lovitt and C. J. Wright, Colloids and Surfaces A: Physicochem. Eng. Aspects 157 (1999) 117.10.1016/S0927-7757(99)00045-X ↗
10. S. Biggs and G. Spinks, J. Adhesion Sci. Technol. 12 (1998) 461.10.1163/156856198X00164 ↗
11. W. R. Bowen, N. Hilal, R. W. Lovitt and C. J. Wright, Colloids and Surfaces A: Physicochem. Eng. Aspects 136 (1998) 231.10.1016/S0927-7757(97)00243-4 ↗
12. Idem., J. Membrane Sci. 139 (1998) 269.10.1016/S0376-7388(97)00255-X ↗
13. Idem., ibid. 154 (1999) 205.10.2307/2463912 ↗
14. D. M. Schaefer, M. Carpenter, B. Gady, R. Reifenberger, L. P. Demejo and D. S. Rimai. J. Adhesion Sci. Technol. 9 (1995) 1049.10.1163/156856195X00897 ↗
15. _J. R. Smith, S. A. Campbell and F. C. Walsh, Trans. IMF 76 (1998) B53.
16. Personal Communication Sillavan Metal Services Ltd Wolverhampton UK.
17. P. F. Luckham and P. G. Hartley, Adv. Colloid and Interface Sci 49 (1994) 341.10.1016/0001-8686(94)80019-7 ↗
18. J. P. Cleveland, S. Manne, D. Bocek and P. K. Hansma, Rev. Sci. Instrum. 64 (1993) 403.10.1063/1.1144209 ↗
19. BS 1134: Part 1, British Standards Institution, 1988.
20. B. V. Derjaguin, V. M. Muller and Y. P. Toporov, J. Colloid and Interface Sci. 53 (1975) 314.10.1016/0021-9797(75)90018-1 ↗
21. V. Muller, V. S. Yushenko and B. V. Derjaguin, ibid. 77 (1980) 91.10.1016/0021-9797(80)90419-1 ↗