Thermal and vapor pressure effects on cavitation and void growth
Source abstract
Abstract
Vapor pressure and thermal stress induced growth and coalsecence of microvoids near interfaces of die/die-attach and die-pad/moulding compound is recognised as the precursor to interface delamination and popcorn cracking of plastic electronic packages. When exposed to humid ambient conditions prior to reflow soldering, plastic electronic packages absorb moisture, which condenses within the numerous micropores in the substrate, die attach, moulding compounds and in the vicinity of interfaces joining the different material layers. During reflow soldering, moisture in these micropores is vaporized. A representative material cell containing a single microvoid is used to investigate void growth under combined vapor pressure and thermal stress. A critical surface traction, the sum of the internal vapor pressure and the externally applied stress, defines the onset of unstable void growth. Existence of “large” microvoids lowers significantly the critical stress levels for unstable void growth. These stress levels are consistent with generally accepted estimates of stress levels for popcorn cracking given in the literature. Vapor pressure effects can be incorporated into a continuum description of stresses and strains and the Gurson-Tvergaard void growth model providing a new capability for full-field analysis of popcorn cracking in electronic packages.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. I. Fukuzawa, S. Ishiguro and S. Nanbu, in Proc. Int. Reliab. Phys. Symp., 1985, p.192.10.1109/IRPS.1985.362097 ↗
2. J. E. Galloway and R. Munamarty, IEEE Trans. Reliability 44(3) (1995) 362.10.1109/24.406565 ↗
3. X. J. Fan and T. B. Lim, in ASME 1999 International Mechanical Engineering Congress, 11th Symposium on Mechanics of Surface Mount Assemblies, Nashville, Tennessee, 14–19 November.
4. A. A. O. Tay and T. Lin, IEEE Transactions on Components, Packaging and Manufacturing Technology—Part A 19(2) (1996) 186.10.1109/95.506103 ↗
5. J. E. Galloway and B. M. Miles, ibid. 20(3) (1997) 274.10.1109/95.623021 ↗
6. S. Liu and Y. Mei, ibid. 18(3) (1995) 634.10.1109/95.465163 ↗
7. Y. B. Park and J. Yu, in IEEE/CPMT Int'l Electronics Manufacturing Technology Symposium, 1997, p. 12.
8. K. W. Lee and Y. Y. Earmme, Finite Elements in Analysis and Design 30 (1998) 81.10.1016/S0168-874X(98)00026-2 ↗
9. J. M. Ball, Phil. Trans. Roy. Soc. London A 306 (1982) 577.
10. Y. Huang, J. R. Hutchinson and V. Tvergaard, J. Mech. Phys. Solids 39 (1991) 223.10.1016/0022-5096(91)90004-8 ↗
11. H.-S. Hou and R. Abeyaratne, ibid. 40 (1992) 571.10.1016/0022-5096(92)80004-A ↗
12. J. Faleskog and C. F. Shih, ibid. 45 (1997) 21.10.1016/S0022-5096(96)00078-6 ↗
13. P. Liu, L. Cheng and Y. W. Zhang, IEEE Transactions on Advanced Packaging, submitted.
14. Y. Huang, K. X. Hu, C. P. Yeh, N.-Y. Li and K. C. Hwang, J. Electronic Packaging 118 (1996) 229.10.1115/1.2792157 ↗
15. A. L. Gurson, J. Engng. Mater. Tech. 99 (1977) 2.10.1115/1.3443401 ↗
16. V. Tvergaard, Advances in Applied Mechanics 27 (1990) 83.10.1016/S0065-2156(08)70195-9 ↗
17. X. J. Fan and S. Y. Zhang, J. Mater. Sci. 30 (1995) 3483.10.1007/BF00349899 ↗
18. V. Tvergaard and A. Needleman, Acta Metall. 32 (1984) 157.10.1016/0001-6160(84)90213-X ↗
19. X. J. Fan, in Proceedings of The Fourth China-Japan-USASingapore Conference on Biomechanics, edited by G. T. Yang et al. (International Academic Publishers, Beijing, 1995) p. 360.
20. L. Xia and C. F. Shih, J. Mech. Phys. Solids 43 (1995) 233.10.1016/0022-5096(94)00064-C ↗
21. Idem., ibid. 43 (1995) 1953.
22. R. Hill, “The Mathematical Theory of Plasticity” (Clarendo Press, Oxford, 1950).