Oxidation behavior of Si-M-C-O fibers under wide range of oxygen partial pressures
Source abstract
Abstract
The active-to-passive oxidation transition for three types of Si-M-C-O fibers (Lox M, ZMI and SA) was examined at 1773 K and pO2 = 1–25000 Pa through TG, XRD analysis, SEM observation and tensile tests. The pO2 value of the active-to-passive oxidation transition for Lox M and ZMI fibers was between 100–250 Pa. While the strength of Lox M and ZMI fibers was considerably retained after passive-oxidation, it was markedly degraded after active-oxidation (σ = 0 Gpa). For SA fibers, the passive-oxidation occurred even at pO2 = 1 Pa, producing a very large decrease in the tensile strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · High voltage insulation and dielectric phenomena · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. R. R. Naslain, Adv.Composite Mater. 8 (1999) 3.10.1163/156855199X00029 ↗
2. Y. Maniette and A. Oberlin, ibid. 24 (1989) 3361.
3. L. Fillipuzzi and R. Naslain, in Proc. 7th CIMTEC (Elsevier, Amsterdam, 1991) p. 35.
4. H. E. Kim and A. J. Moorhead, J.Amer.Ceram.Soc. 74 (1991) 666.10.1111/j.1151-2916.1991.tb04079.x ↗
5. T. Shimoo, H. Chen and K. Okamura, J.Ceram.Sc.Jpn 100 (1992) 929.
6. T. Shimoo, T. Hayatsu, M. Takeda, H. Ichikawa, T. Seguchi and K. Okamura,ibid.102 (1994) 617.
7. M. H. Berger, N. Hochet and A. R. Bunsell, J.Microsc. 177 (1995) 230.10.1111/j.1365-2818.1995.tb03554.x ↗
8. P.Le. Coustumer, M. Monthioux and A. Oberlin, Br.Ceram.Trans.94 (1995) 177.
9. G. Chollon, R. R. Pailler, R. Naslain, F. Laanani, M. Monthioux and P. Olry, J.Mater. Sci. 32 (1997) 327.10.1023/A:1018541030308 ↗
10. G. Choollon, M. Czeerniak, R. Pailler, X. Bourra, R. Naslain, J. P. Pillot and R. Cannet, ibid. 32 (1997) 893.10.1023/A:1018597432067 ↗
11. M. H. Berger, N. Hochet and A. R. Bunsell, J.Microsc. 185 (1997) 243.10.1046/j.1365-2818.1997.d01-620.x ↗
12. T. Shimoo, F. Toyoda and K. Okamura, J.Ceram.Soc. Jpn 106 (1998) 447.10.2109/jcersj.106.447 ↗
13. Y. T. Zhu, S. T. Taylor, M. G. Stout, D. P. Butt and T. C. Lowe, J.Amer.Ceram.Soc. 81 (1998) 655.10.1111/j.1151-2916.1998.tb02386.x ↗
14. T. Shimoo, F. Toyoda and K. Okamura, J.Ceram.Soc. Jpn 107 (1999) 263.10.2109/jcersj.107.263 ↗
15. M. Takeda, J. Sakamoto, Y. Imai and H. Ichikawa, Composites Sci.Tech. 59 (1999) 813.10.1016/S0266-3538(99)00012-3 ↗
16. T. Shimoo, F. Toyoda and K. Okamura, J.Mater.Sci. 35 (2000) 3301.10.1023/A:1004883607913 ↗
17. Idem., J.Amer.Ceram.Soc. 83 (2000) 1450.10.1111/j.1151-2916.2000.tb01409.x ↗
18. Idem., J.Mater.Sci. 35 (2000) 3811.10.1023/A:1004873128987 ↗
19. T. Shimoo, H. Takeuchi, M. Takeda and K. Okamura, J.Ceram.Soc.Jpn 108 (2000) 1096.10.2109/jcersj.108.1264_1096 ↗
20. T. Shimoo, Y. Morisada and K. Okamura, J.Amer. Ceram.Soc. 83 (2000) 3049.10.1111/j.1151-2916.2000.tb01681.x ↗
21. Idem., J.Mater.Sci. 37 (2002) 1793.10.1023/A:1014945823031 ↗
22. K. Kumagawa, H. Yamaoka, M. Shibuya and T. Yamamura, Ceram.Eng.Sci.Proc. 18 (1997) 113.10.1002/9780470294437.ch12 ↗
23. M. Takeda, J. Sakamoto, A. Saeki, Y. Imai and H. Ichikawa, ibid. 16 (1995) 37.10.1002/9780470314715.ch3 ↗
24. T. Ishikawa, M. Sato, S. KajII, Y. Tanaka and M. Suzuki,ibid. 22 (2001) 471.10.1002/9780470294680.ch55 ↗
25. B. Schneider, A. Guette, R. Naslain, M. Cataldi and A. Costecalde, J.Mater.Sci. 33 (1998) 535.10.1023/A:1004313022769 ↗
26. S. Singhal, ibid. 11 (1976) 1246.10.1007/BF00545142 ↗
27. M.A. Lalamlin, F. L. Roley and R. L. Fordham, J.Eur.Ceram.Soc. 10 (1992) 347.10.1016/0955-2219(92)90010-B ↗