Effect of compositions and processing parameters on eutectoid reaction in AlCoFeNi multi-component alloys
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · High Entropy Alloys Studies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Yeh JW et al (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater 6(5):299–30310.1002/adem.200300567 ↗
2. Yeh J-W, Lin S-J (2018) Breakthrough applications of high-entropy materials. J Mater Res 33(19):3129–313710.1557/jmr.2018.283 ↗
3. Zhang Y (2019) High-entropy materials, vol 2. Springer Nature Singapore Pte Ltd, pp 215–23210.1007/978-981-13-8526-1 ↗
4. Ching W-Y et al (2020) Fundamental electronic structure and multiatomic bonding in 13 biocompatible high-entropy alloys. npj Comput Mater 6(1):4510.1038/s41524-020-0321-x ↗
5. Zhang C et al (2016) Understanding phase stability of Al–Co–Cr–Fe–Ni high entropy alloys. Mater Des 109:425–43310.1016/j.matdes.2016.07.073 ↗
6. Csaki I et al (2016) Researches regarding the processing technique impact on the chemical composition, microstructure and hardness of AlCrFeNiCo high entropy alloy. Rev Chim 67:1373–1377
7. Ghadami F, Ghadami S, Davoudabadi M (2022) Sliding wear behavior of the nanoceria-doped AlCrFeCoNi high-entropy alloy coatings deposited by air plasma spraying technique. J Therm Spray Technol 31(4):1263–127510.1007/s11666-022-01354-8 ↗
8. Ossiansson M et al (2022) Assessment of CrFeCoNi and AlCrFeCoNi high-entropy alloys as bond coats for thermal barrier coatings. J Therm Spray Technol 31(4):1404–142210.1007/s11666-022-01388-y ↗
9. Geanta V, Voiculescu I (2020) AlCrFeCoNi system for military applications. Eng Steels High Entropy Alloy 139
10. Wang Y et al (2008) Microstructure and compressive properties of AlCrFeCoNi high entropy alloy. Mater Sci Eng A 491(1–2):154–15810.1016/j.msea.2008.01.064 ↗
11. Wang F et al (2009) Cooling rate and size effect on the microstructure and mechanical properties of AlCoCrFeNi high entropy alloy. J Eng Mater Technol 131:03450110.1115/1.3120387 ↗
12. López Ríos M et al (2020) Effects of nickel content on the microstructure, microhardness and corrosion behavior of high-entropy AlCoCrFeNix alloys. Sci Rep 10(1):2111910.1038/s41598-020-78108-5 ↗
13. Wei D et al (2019) Novel Co-rich high entropy alloys with superior tensile properties. Mater Res Lett 7(2):82–8810.1080/21663831.2018.1553803 ↗
14. Ye Y et al (2016) High-entropy alloy: challenges and prospects. Mater Today 19(6):349–36210.1016/j.mattod.2015.11.026 ↗
15. Alhafez IA et al (2019) Nanoindentation into a high-entropy alloy–An atomistic study. J Alloys Compd 803:618–62410.1016/j.jallcom.2019.06.277 ↗
16. Voiculescu I et al (2013) Influence of the chemical composition on the microstructure and microhardness of AlCrFeCoNi high entropy alloy. Rev Chim Bucur 64(12):1441–1444
17. Li Z et al (2019) Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys. Prog Mater Sci 102:296–34510.1016/j.pmatsci.2018.12.003 ↗
18. Chen C et al (2016) Microstructure and mechanical properties of Al20−xCr20+0.5xFe20Co20Ni20+0.5x high entropy alloys. J Alloys Compd 659:279–28710.1016/j.jallcom.2015.10.258 ↗
19. Yang S, Liu Z, Pi J (2020) Microstructure and wear behavior of the AlCrFeCoNi high-entropy alloy fabricated by additive manufacturing. Mater Lett 261:12700410.1016/j.matlet.2019.127004 ↗
20. Miracle DB, Senkov ON (2017) A critical review of high entropy alloys and related concepts. Acta Mater 122:448–51110.1016/j.actamat.2016.08.081 ↗
21. López Ríos M et al (2020) Effects of nickel content on the microstructure, microhardness and corrosion behavior of high-entropy AlCoCrFeNix alloys. Sci Rep 10:1–2111910.1038/s41598-020-78108-5 ↗
22. Annasamy M et al (2019) Static recrystallization and grain growth behaviour of Al0.3CoCrFeNi high entropy alloy. Mater Sci Eng A 754:282–29410.1016/j.msea.2019.03.088 ↗
23. Hou J et al (2017) Deformation behavior of Al0.25CoCrFeNi high-entropy alloy after recrystallization. Metals 7(4):11110.3390/met7040111 ↗
24. Gwalani B et al (2017) Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy. Mater Des 121:254–26010.1016/j.matdes.2017.02.072 ↗
25. Lu Y et al (2014) A promising new class of high-temperature alloys: eutectic high-entropy alloys. Sci Rep 4(1):620010.1038/srep06200 ↗
26. Ye X et al (2021) A new infinite solid solution strategy to design eutectic high entropy alloys with B2 and BCC structure. Scripta Mater 199:11388610.1016/j.scriptamat.2021.113886 ↗
27. Dasari S et al (2020) Hierarchical eutectoid nano-lamellar decomposition in an Al0.3CoFeNi complex concentrated alloy. Sci Rep 10(1):483610.1038/s41598-020-61538-6 ↗
28. Li H et al (2022) Eutectoid lamellar structure strengthened ultra-strong Al13Fe29Co29Ni29 high-entropy alloy. Mater Sci Eng A 856:14393410.1016/j.msea.2022.143934 ↗
29. Mazullah D et al (2025) The effect of aging temperature and time on nano-lamellar structure formation and tensile properties in Al10(CoFeNi1.5)90 high entropy alloy. J Alloys Compd 1014:17860510.1016/j.jallcom.2025.178605 ↗
30. Mazullah et al (2025) The effect of prior FCC grain size on lamellar microstructure in Al10(CoFeNi1.5)90 high entropy alloy. J Alloys Compd 1036:18200210.1016/j.jallcom.2025.182002 ↗
31. Deng Y et al (2015) Design of a twinning-induced plasticity high entropy alloy. Acta Mater 94:124–13310.1016/j.actamat.2015.04.014 ↗
32. Li Z et al (2016) Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off. Nature 534(7606):227–23010.1038/nature17981 ↗
33. Fu X, Schuh CA, Olivetti EA (2017) Materials selection considerations for high entropy alloys. Scripta Mater 138:145–15010.1016/j.scriptamat.2017.03.014 ↗
34. Senkov O et al (2015) Accelerated exploration of multi-principal element alloys with solid solution phases. Nat Commun 6(1):652910.1038/ncomms7529 ↗
35. Grässel O et al (2000) High strength Fe–Mn–(Al, Si) TRIP/TWIP steels development—properties—application. Int J Plast 16(10–11):1391–140910.1016/S0749-6419(00)00015-2 ↗
36. Gutiérrez-Urrutia I, Raabe D (2012) Multistage strain hardening through dislocation substructure and twinning in a high strength and ductile weight-reduced Fe–Mn–Al–C steel. Acta Mater 60(16):5791–580210.1016/j.actamat.2012.07.018 ↗
37. Gutierrez-Urrutia I, Raabe D (2013) Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels. Scripta Mater 68(6):343–34710.1016/j.scriptamat.2012.08.038 ↗
38. Butler TM, Weaver ML (2016) Oxidation behavior of arc melted AlCoCrFeNi multi-component high-entropy alloys. J Alloys Compd 674:229–24410.1016/j.jallcom.2016.02.257 ↗
39. Meghwal A et al (2022) Nano-and micro-mechanical properties and corrosion performance of a HVOF sprayed AlCoCrFeNi high-entropy alloy coating. J Alloys Compd 912:16500010.1016/j.jallcom.2022.165000 ↗
40. Güler S, Alkan ED, Alkan M (2022) Vacuum arc melted and heat treated AlCoCrFeNiTiX based high-entropy alloys: thermodynamic and microstructural investigations. J Alloys Compd 903:16390110.1016/j.jallcom.2022.163901 ↗
41. Nazaretyan K et al (2023) AlCo-rich AlCoNiFe and AlCoNiFeCr high entropy alloys: synthesis and interaction pathway at high heating rates. J Alloys Compd 931:16758910.1016/j.jallcom.2022.167589 ↗
42. Wang W-R et al (2012) Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys. Intermetallics 26:44–5110.1016/j.intermet.2012.03.005 ↗
43. Xiong Z et al (2014) Effect of holding temperature and time on ferrite formation in dual phase steel produced by strip casting
44. Zener C (1946) Kinetics of the decomposition of austenite. Trans AIME 167:550–595
45. Bhadeshia HKDH, Honeycombe RWK (2017) Steels: microstructure and properties. Butterworth-Heinemann
46. Roosz A, Gacsi Z (1981) The correlation of the average true interlamellar spacing of pearlite and the transformation temperature in DIN39Cr4 steel. Metallography 14(2):129–13910.1016/0026-0800(81)90037-9 ↗
47. Bae C, Lee C, Nam W (2002) Effect of carbon content on mechanical properties of fully pearlitic steels. Mater Sci Technol 18(11):1317–132110.1179/026708302225007556 ↗
48. Wang J et al (2020) Microstructure, crystallographic orientation and mechanical property in AlCoCrFeNi2.1 eutectic high-entropy alloy under magnetic field-assisted directional solidification. Metall Mater Trans A 51(7):3504–351710.1007/s11661-020-05771-8 ↗
49. Gwalani B et al (2019) Influence of ordered L12 precipitation on strain-rate dependent mechanical behavior in a eutectic high entropy alloy. Sci Rep 9(1):637110.1038/s41598-019-42870-y ↗
50. Pereloma E, Edmonds DV (2012) Phase transformations in steels: fundamentals and diffusion-controlled transformations. Elsevier10.1533/9780857096104 ↗
51. Majta J et al (2002) An integrated computer model with applications for austenite-to-ferrite transformation during hot deformation of Nb-microalloyed steels. Metall Mater Trans A Phys Metall Mater Sci 33:1509–152010.1007/s11661-002-0073-x ↗
52. Vooijs S et al (2000) On the mobility of the austenite-ferrite interface in Fe–Co and Fe–Cu. Metall Mater Trans A Phys Metall Mater Sci 31:379–38510.1007/s11661-000-0274-0 ↗
53. Liu D, Fazeli F, Militzer M (2007) Modeling of microstructure evolution during hot strip rolling of dual phase steels. ISIJ Int 47(12):1789–179810.2355/isijinternational.47.1789 ↗
54. Akisanya AR, Obi U, Renton NC (2012) Effect of ageing on phase evolution and mechanical properties of a high tungsten super-duplex stainless steel. Mater Sci Eng A 535:281–28910.1016/j.msea.2011.12.087 ↗
55. Minouei H et al (2019) Non-isothermal nano-crystallization kinetics in amorphous Ni55Nb35Si10 alloy. Trans Nonferr Met Soc China 29(2):358–36410.1016/S1003-6326(19)64945-9 ↗
56. Zhang Z-m et al (2012) Continuous cooling transformation behavior and kinetic models of transformations for an ultra-low carbon bainitic steel. J Iron Steel Res Int 19(12):73–7810.1016/S1006-706X(13)60035-7 ↗
57. Ranganathan S, Von Heimendahl M (1981) The three activation energies with isothermal transformations: applications to metallic glasses. J Mater Sci 16(9):2401–240410.1007/BF01113575 ↗
58. Capdevila C, Miller MK, Chao J (2012) Phase separation kinetics in a Fe–Cr–Al alloy. Acta Mater 60(12):4673–468410.1016/j.actamat.2012.05.022 ↗
59. Matsuda H, Bhadeshia H (2003) Avrami theory for transformations from non-uniform austenite grain structures. Mater Sci Technol 19(10):1330–133410.1179/026708303225002055 ↗
60. Asadabad MA, Goodarzi M, Kheirandish S (2008) Kinetics of austenite formation in dual phase steels. ISIJ Int 48(9):1251–125510.2355/isijinternational.48.1251 ↗
61. Burke J, Turnbull D (1952) Recrystallization and grain growth. Prog Met Phys 3:220–29210.1016/0502-8205(52)90009-9 ↗
62. Mazaheri Y et al (2016) Kinetics of ferrite recrystallization and austenite formation during intercritical annealing of the cold-rolled ferrite/martensite duplex structures. Metall Mater Trans A 47:1040–105110.1007/s11661-015-3288-3 ↗
63. Shuai L et al (2021) Segregation and precipitation stabilizing an ultrafine lamellar-structured Al-0.3% Cu alloy. Acta Mater 206:11659510.1016/j.actamat.2020.116595 ↗
64. Borelius G, Berglund S, Sjoberg S (1953) Measurements on the evolution of heat during the recovery of cold-worked metals. Ark Fys 6(2):143–149
65. Kuhlmann D (1948) Zur theorie der nachwirkungserscheinungen. Z Phys 124(7):468–48110.1007/BF01668885 ↗
66. Godfrey A, Liu Q (2009) Stored energy and structure in top-down processed nanostructured metals. Scr Mater 60(12):1050–105510.1016/j.scriptamat.2009.02.014 ↗
67. Fu L et al (2022) Coarsening kinetics of lamellar and equiaxed microstructures of eutectic Au–20Sn during the annealing. J Mater Res Technol 17:2134–214410.1016/j.jmrt.2022.01.162 ↗
68. Li X et al (2017) Coarsening kinetics of lamellar microstructures: experiments and simulations on a fully-lamellar Fe–Al in situ composite. Acta Mater 127:230–24310.1016/j.actamat.2017.01.041 ↗
69. Vaidya M et al (2019) Grain growth kinetics in CoCrFeNi and CoCrFeMnNi high entropy alloys processed by spark plasma sintering. J Alloys Compd 791:1114–112110.1016/j.jallcom.2019.03.341 ↗
70. Dudala S, Krishna S C, Korla R (2021) Microstructural evolution and grain-growth kinetics of Al0.2CoCrFeNi high-entropy alloy. Philos Mag Lett 101(11):444–45410.1080/09500839.2021.1975056 ↗
71. Gwalani B et al (2019) Composition-dependent apparent activation-energy and sluggish grain-growth in high entropy alloys. Mater Res Lett 7(7):267–27410.1080/21663831.2019.1601644 ↗
72. Sun C et al (2012) Thermal stability of ultrafine grained Fe–Cr–Ni alloy. Mater Sci Eng A 542:64–7010.1016/j.msea.2012.02.033 ↗
73. Gil FJ, Planell JA (2000) Behaviour of normal grain growth kinetics in single phase titanium and titanium alloys. Mater Sci Eng A 283(1–2):17–2410.1016/S0921-5093(00)00731-0 ↗
74. Silva CJ et al (2016) Grain growth kinetics and annealed texture characteristics of Mg-Sc binary alloys. J Alloys Compd 687:548–56110.1016/j.jallcom.2016.06.123 ↗
75. Takeuchi A, Inoue A (2005) Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater Trans 46(12):2817–282910.2320/matertrans.46.2817 ↗
76. Wang G-Y et al (2025) The growth activation energy of sigma phase in nonequal molar CoCrFeNiV low entropy and high entropy alloys. J Alloys Compd 1017:17886310.1016/j.jallcom.2025.178863 ↗
77. Hsu W-L et al (2024) Clarifying the four core effects of high-entropy materials. Nat Rev Chem 8(6):471–48510.1038/s41570-024-00602-5 ↗
78. Mazullah S et al (2026) Mechanical properties and strengthening mechanisms of eutectoid Al10(CoFeNi1.5)90 multi-component alloy. Mater Sci Eng A 955:14985010.1016/j.msea.2026.149850 ↗
79. Mazullah S et al (2026) Unlocking the microstructures and tensile properties combinations in Al10(CoFeNi1.5)90 multi-component alloy through strategic heat treatment routes. J Alloys Compd 1059:18708410.1016/j.jallcom.2026.187084 ↗
80. Dasari S et al (2020) Engineering transformation pathways in an Al0.3CoFeNi complex concentrated alloy leads to excellent strength–ductility combination. Mater Res Lett 8(11):399–40710.1080/21663831.2020.1777215 ↗
81. Langford G (1977) Deformation of pearlite. Metall Trans A 8(6):861–87510.1007/BF02661567 ↗
82. Li S, Wang Y, Wang X (2015) Effects of Ni content on the microstructures, mechanical properties and thermal aging embrittlement behaviors of Fe–20Cr–xNi alloys. Mater Sci Eng A 639:640–64610.1016/j.msea.2015.05.063 ↗
83. Yang T et al (2015) Effects of AL addition on microstructure and mechanical properties of AlxCoCrFeNi high-entropy alloy. Mater Sci Eng A 648:15–2210.1016/j.msea.2015.09.034 ↗
84. Fourmont A et al (2020) Effects of planetary ball milling on AlCoCrFeNi high entropy alloys prepared by spark plasma sintering: experiments and molecular dynamics study. J Alloys Compd 820:15344810.1016/j.jallcom.2019.153448 ↗
85. Fourmont A et al (2021) Effects of mechanical activation on chemical homogeneity and contamination level in dual-phase AlCoCrFeNi high entropy alloy. Mater Chem Phys 272:12500010.1016/j.matchemphys.2021.125000 ↗
86. Guo S et al (2011) Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys. J Appl Phys. https://doi.org/10.1063/1.358722810.1063/1.3587228 ↗
87. Lu Y et al (2017) A new strategy to design eutectic high-entropy alloys using mixing enthalpy. Intermetallics 91:124–12810.1016/j.intermet.2017.09.001 ↗
88. Pickering E, Jones N (2016) High-entropy alloys: a critical assessment of their founding principles and future prospects. Int Mater Rev 61(3):183–20210.1080/09506608.2016.1180020 ↗
89. Olson G (2013) Genomic materials design: the ferrous frontier. Acta Mater 61(3):771–78110.1016/j.actamat.2012.10.045 ↗