journal article·2026-07Open access

Corrosion and wear behavior of AZ91D Mg alloy modified by electrophoretic deposition of TiO2-graphene composite coating

Chun Chiu, Yan-Siang Chen

Journal of Materials Science· Volume 61· Issue 28

Abstract

In the present study, the TiO2-graphene surface coating was prepared by electrophoretic deposition (EPD) on the AZ91D Mg alloy. The Taguchi method was used to optimize the parameters, including heat-treatment temperature, graphene addition, and EPD voltage. With the optimal parameter combination, the surface-treated sample exhibited a corrosion current density of 7.33 µA/cm2 and a corrosion rate of 0.82 mpy, both significantly lower than those of the uncoated AZ91D alloy (41.30 µA/cm2 and 2.85 mpy, respectively), indicating a substantial improvement in corrosion resistance. Furthermore, wear tests and microhardness measurements showed that the treated surface exhibited approximately a 64% reduction in friction coefficient and a 44% increase in hardness compared to the untreated base material. The results demonstrate that surface modification of AZ91D magnesium alloy via electrophoretic deposition can effectively enhance corrosion and wear resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Electrophoretic Deposition in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Srinivas A, Pavan D, Venkatesha BK, Rao RR, Mohith L (2022) Study on mechanical properties of AZ91 magnesium alloy. Mater Today Proc 54:291–294. https://doi.org/10.1016/j.matpr.2021.09.1710.1016/j.matpr.2021.09.17 ↗
2. Mathieu S, Rapin C, Steinmetz J, Steinmetz P (2003) A corrosion study of the main constituent phases of AZ91 magnesium alloys. Corros Sci 45:2741–2755. https://doi.org/10.1016/S0010-938X(03)00109-410.1016/S0010-938X(03)00109-4 ↗
3. Li T, Song J, Zhang A, You G, Yang Y, Jiang B, Qin XY, Xu C, Pan F (2023) Progress and prospects in Mg-alloy super-sized high pressure die casting for automotive structural components. J Magnes Alloys 11:4166–4180. https://doi.org/10.1016/j.jma.2023.11.00310.1016/j.jma.2023.11.003 ↗
4. Anderson ML, Auffhammer M (2014) Pounds that kill: the external costs of vehicle weight. Rev Econ Stud 81:535–571. https://doi.org/10.1093/restud/rdt03510.1093/restud/rdt035 ↗
5. Gao ZY, Yang D, Sun CJ, Du LT, Zhang X, An ZG (2021) The corrosion resistance of Al film on AZ31 magnesium alloys by magnetron sputtering. Metals 11:1522. https://doi.org/10.3390/met1110152210.3390/met11101522 ↗
6. Li Q, Liang PB, Li YQ, Ye ZP, Zhang B, Ji CY (2022) The use of phytic acid conversion coating to enhance the corrosion resistance of AZ91D magnesium alloy. Int J Electrochem Sci 17:22095. https://doi.org/10.20964/2022.09.1510.20964/2022.09.15 ↗
7. Ghavidel N, Allahkaram SR, Naderi R, Barzegar M, Bakhshandeh H (2020) Corrosion and wear behavior of an electroless Ni-P/nano-SiC coating on AZ31 Mg alloy obtained through environmentally-friendly conversion coating. Surf Coat Technol 382:125156. https://doi.org/10.1016/j.surfcoat.2019.12515610.1016/j.surfcoat.2019.125156 ↗
8. Geng ZB, Li XH, Zhang YF, Lin EL, Kure-Chu SZ, Li XP, Xiao XF (2021) Corrosion resistance and degradation behavior of anodized Mg–Gd alloys: a comparative study. Surf Coat Technol 412:127042. https://doi.org/10.1016/j.surfcoat.2021.12704210.1016/j.surfcoat.2021.127042 ↗
9. Muhaffel F, Cimenoglu H (2019) Development of corrosion and wear resistant micro-arc oxidation coating on a magnesium alloy. Surf Coat Technol 357:822–832. https://doi.org/10.1016/j.surfcoat.2018.10.08910.1016/j.surfcoat.2018.10.089 ↗
10. Hadzhieva Z, Boccaccini AR (2022) Recent developments in electrophoretic deposition (EPD) of antibacterial coatings for biomedical applications-a review. Curr Opin Biomed Eng 21:100367. https://doi.org/10.1016/j.cobme.2021.10036710.1016/j.cobme.2021.100367 ↗
11. Mansoor M, Shahid M (2016) Carbon nanotube-reinforced aluminum composite produced by induction melting. J Appl Res Technol 14:215–224. https://doi.org/10.1016/j.jart.2016.05.00210.1016/j.jart.2016.05.002 ↗
12. Kumari L, Zhang T, Du GH, Li WZ, Wang QW, Datye A, Wu KH (2008) Thermal properties of CNT-alumina nanocomposites. Compos Sci Technol 68:2178–2183. https://doi.org/10.1016/j.compscitech.2008.04.00110.1016/j.compscitech.2008.04.001 ↗
13. Askarnia R, Ghasemi B, Fardi SR, Adabifiroozjaei E (2020) Improvement of tribological, mechanical and chemical properties of Mg alloy (AZ91D) by electrophoretic deposition of alumina/GO coating. Surf Coat Technol 403:126410. https://doi.org/10.1016/j.surfcoat.2020.12641010.1016/j.surfcoat.2020.126410 ↗
14. Shen GX, Chen YC, Lin CJ (2005) Corrosion protection of 316 L stainless steel by a TiO2 nanoparticle coating prepared by sol-gel method. Thin Solid Films 489:130–136. https://doi.org/10.1016/j.tsf.2005.05.01610.1016/j.tsf.2005.05.016 ↗
15. Samiee M, Noori A, Seyedraoufi ZS, Eshraghi MJ (2024) Enhanced biocompatibility of biodegradable magnesium alloy modified by TiO2–MgO–GO coating. J Aust Ceram Soc 60:231–238. https://doi.org/10.1007/s41779-023-00960-110.1007/s41779-023-00960-1 ↗
16. Kavimani V, Prahash KS, Gunashri R, Sathish P (2018) Corrosion protection behaviour of r-GO/TiO2 hybrid composite coating on magnesium substrate in 3.5 wt.% NaCl. Prog Org Coat 125:358–364. https://doi.org/10.1016/j.porgcoat.2018.02.02210.1016/j.porgcoat.2018.02.022 ↗
17. Mbayachi VB, Ndayiragije E, Sammani T, Taj S, Mbuta ER, Khan AU (2021) Graphene synthesis, characterization, and its applications: a review. Results Chem 3:100163. https://doi.org/10.1016/j.rechem.2021.10016310.1016/j.rechem.2021.100163 ↗
18. Yusoff A, Dai L, Cheng H, Liu J (2015) Graphene based energy devices. Nanoscale 7:6881–6882. https://doi.org/10.1039/C5NR90062J10.1039/C5NR90062J ↗
19. Hisam MW, Dar AA, Elrasheed MO, Khan MS, Gera R, Azad I (2024) The versatility of the Taguchi method: optimizing experiments across diverse disciplines. J Stat Theory Appl 23:365–389. https://doi.org/10.1007/s44199-024-00093-9NS10.1007/s44199-024-00093-9NS ↗
20. Patel NS, Parihar PL, Makwana JS (2021) Parametric optimization to improve the machining process by using Taguchi method: a review. Mater Today Proc 47:2709–2714. https://doi.org/10.1016/j.matpr.2021.03.00510.1016/j.matpr.2021.03.005 ↗
21. Shuai S, Liu Y, Zhao C, Zhu H, Li Y, Zhou K, Ge W, Hao J (2020) Improved synthesis of graphene oxide with controlled oxidation degree by using different dihydrogen phosphate as intercalators. Chem Phys 539:110938. https://doi.org/10.1016/j.chemphys.2020.11093810.1016/j.chemphys.2020.110938 ↗
22. Trapalis A, Todorova N, Giannakopoulou T, Boukos N, Speliotis T, Dimotikali D, Yu J (2016) TiO2/graphene composite photocatalysts for NOx removal: a comparison of surfactant-stabilized graphene and reduced graphene oxide. Appl Catal B-Environ 180:637–647. https://doi.org/10.1016/j.apcatb.2015.07.00910.1016/j.apcatb.2015.07.009 ↗
23. Prabhu S, Cindrella L, Kwon OJ, Mohanraju K (2017) Superhydrophilic and self-cleaning rGO-TiO2 composite coatings for indoor and outdoor photovoltaic applications. Sol Energy Mater Sol Cells 169:304–312. https://doi.org/10.1016/j.solmat.2017.05.02310.1016/j.solmat.2017.05.023 ↗
24. Wang P, Wang J, Wang X, Yu H, Yu J, Lei M, Wang Y (2013) One-step synthesis of easy-recycling TiO2-rGO nanocomposite photocatalysts with enhanced photocatalytic activity. Appl Catal B Environ 132:452–459. https://doi.org/10.1016/j.apcatb.2012.12.00910.1016/j.apcatb.2012.12.009 ↗
25. Irshad MA, Nawaz R, Rehman MZU, Adrees M, Rizwan M, Ali S, Ahmad S, Tasleem S (2021) Synthesis, characterization and advanced sustainable applications of titanium dioxide nanoparticles: A review. Ecotoxicol Environ Saf 212:111978. https://doi.org/10.1016/j.ecoenv.2021.11197810.1016/j.ecoenv.2021.111978 ↗
26. Liu X, Yang W, Yu C, Zhang H (2018) Influence of TiO2 morphology on adsorption-photocatalytic efficiency of TiO2-graphene composites for methylene blue degradation. J Environ Chem Eng 6:4899–4907. https://doi.org/10.1016/j.jece.2018.07.00910.1016/j.jece.2018.07.009 ↗
27. Wang J, Wang M, Xiong J, Lu C (2015) Enhanced photocatalytic activity of a TiO2/graphene composite by improving the reduction degree of graphene. New Carbon Mater 30:357–363. https://doi.org/10.1016/S1872-5805(15)60195-010.1016/S1872-5805(15)60195-0 ↗
28. Basu RN, Randall CA, Mayo MJ (2001) Fabrication of dense zirconia electrolyte films for tubular solid oxide fuel cells by electrophoretic deposition. J Am Ceram Soc 84:33–40. https://doi.org/10.1111/j.1151-2916.2001.tb00604.x10.1111/j.1151-2916.2001.tb00604.x ↗
29. Cao Z, Li R, Shou M, Luo R, Wei B, Wang T (2024) Mechanical properties and tribological behaviors of Ag/graphene composite coating under sliding friction and current–carrying fretting. Tribol Int 197:109811. https://doi.org/10.1016/j.triboint.2024.10981110.1016/j.triboint.2024.109811 ↗
30. Jia Z, Chen T, Wang J, Ni J, Li H, Shao X (2015) Synthesis, characterization and tribological properties of Cu/reduced graphene oxide composites. Tribol Int 88:17–24. https://doi.org/10.1016/j.triboint.2015.02.02810.1016/j.triboint.2015.02.028 ↗
31. Çomaklı O, Yetim T, Çelik A (2014) The effect of calcination temperatures on wear properties of TiO2 coated CP-Ti. Surf Coat Technol 246:34–39. https://doi.org/10.1016/j.surfcoat.2014.02.05910.1016/j.surfcoat.2014.02.059 ↗
32. Chen C, Qiu S, Cui M, Qin S, Yan G, Zhao H, Wang L, Xue Q (2017) Achieving high performance corrosion and wear resistant epoxy coatings via incorporation of noncovalent functionalized graphene. Carbon 114:356–366. https://doi.org/10.1016/j.carbon.2016.12.04410.1016/j.carbon.2016.12.044 ↗
33. Ding J, Rahman O, Peng W, Dou H, Yu H (2018) A novel hydroxyl epoxy phosphate monomer enhancing the anticorrosive performance of waterborne graphene/epoxy coatings. Appl Surf Sci 427:981–991. https://doi.org/10.1016/j.apsusc.2017.08.22410.1016/j.apsusc.2017.08.224 ↗
34. Xie Y, Chen M, Xie D, Zhong L, Zhang X (2017) A fast, low temperature zinc phosphate coating on steel accelerated by graphene oxide. Corros Sci 128:1–8. https://doi.org/10.1016/j.corsci.2017.08.03310.1016/j.corsci.2017.08.033 ↗
35. Osório WR, Freitas ES, Garcia A (2013) EIS parameters and cell spacings of an Al–Bi alloy in NaCl solution. Electrochim Acta 108:781–787. https://doi.org/10.1016/j.electacta.2013.07.03610.1016/j.electacta.2013.07.036 ↗
36. Yao Z, Jiang Z, Wang F (2007) Study on corrosion resistance and roughness of micro-plasma oxidation ceramic coatings on Ti alloy by EIS technique. Electrochim Acta 52:4539–4546. https://doi.org/10.1016/j.electacta.2006.12.05210.1016/j.electacta.2006.12.052 ↗
37. Ahangari M, Johar MH, Saremi M (2021) Hydroxyapatite-carboxymethyl cellulose-graphene composite coating development on AZ31 magnesium alloy: corrosion behavior and mechanical properties. Ceram Int 47:3529–3539. https://doi.org/10.1016/j.ceramint.2020.09.19710.1016/j.ceramint.2020.09.197 ↗
38. Wang L, Zhang B, Shinohara T (2010) Corrosion behavior of AZ91 magnesium alloy in dilute NaCl solutions. Mater Des 31:857–863. https://doi.org/10.1016/j.matdes.2009.07.04910.1016/j.matdes.2009.07.049 ↗
39. Ollik K, Lieder M (2020) Review of the application of graphene-based coatings as anticorrosion layers. Coatings 10:883. https://doi.org/10.3390/coatings1009088310.3390/coatings10090883 ↗
40. Wan D, Tang H, Sun Y, Zeng G, Dong S, Han G, Wang Y, Yang F (2023) Improving the corrosion resistance of AZ91 magnesium alloy by surface coating TiO2 layers. Metals 13:1400. https://doi.org/10.3390/met1308140010.3390/met13081400 ↗