journal article·2026-06

Review: 3D printing techniques, materials and applications in zinc-air and zinc-ion batteries

Aamir Shehzad, Wang Yanen, Ghulam Hassan Askari, Ray Tahir Mushtaq, Maimoona Afzal, Sidra Aslam, Nasar Ali

Journal of Materials Science· Volume 61· Issue 23
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Nanomaterials and Printing Technologies · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Pang Y, Cao Y, Chu Y, Liu M, Snyder K, MacKenzie D, Cao C (2019) Additive manufacturing of batteries. Adv Funct Mater 30(1):190624410.1002/adfm.201906244 ↗
2. Gulzar U, Glynn C, O’Dwyer C (2020) Additive manufacturing for energy storage: methods, designs and material selection for customizable 3D printed batteries and supercapacitors. Curr Opin Electrochem 20:46–5310.1016/j.coelec.2020.02.009 ↗
3. Zhang S, Xue S, Wang Y, Zhang G, Arif N, Li P, Zeng Y-J (2023) Three-dimensional printing, an emerging advanced technique in electrochemical energy storage and conversion. Batteries 9(11):54610.3390/batteries9110546 ↗
4. Zafar MQ, Sajjad R, Anwar MT, Mustafa MS, Husnain N, Aqeel AB, Khan MB (2025) A review on metal additive manufacturing: types, applications and future trends. Recent Prog Mater 07:006. https://doi.org/10.21926/rpm.250100610.21926/rpm.2501006 ↗
5. de Moraes ACM, Hyun WJ, Seo JWT, Downing JR, Lim JM, Hersam MC (2019) Ion-conductive, viscosity-tunable hexagonal boron nitride nanosheet inks. Adv Funct Mater 29(39):190224510.1002/adfm.201902245 ↗
6. Sajjad R, Chauhdary ST, Anwar MT, Zahid A, Khosa AA, Imran M, Sajjad MH (2024) A review of 4D printing: technologies, shape shifting, smart polymer based materials, and biomedical applications. Adv Ind Eng Polym Res 7:20–36. https://doi.org/10.1016/j.aiepr.2023.08.00210.1016/j.aiepr.2023.08.002 ↗
7. Martinez AC, Schiaffino EM, Aranzola AP, Fernandez CA, Seol M-L, Sherrard CG, Jones J, Huddleston WH, Dornbusch DA, Sreenivasan ST, Cortes P, MacDonald E, Maurel A (2023) Multiprocess 3D printing of sodium-ion batteries via vat photopolymerization and direct ink writing. J Phys: Energy 5(4):045010
8. Chen A, Qu C, Shi Y, Shi F (2020) Manufacturing strategies for solid electrolyte in batteries. Front Energy Res 8:57144010.3389/fenrg.2020.571440 ↗
9. Ma Y, Hu X, Hu Z, Sheng Z, Ma S, Chu Y, Wan Q, Luo W, Guo L (2020) Simultaneous compositional and grain size measurements using laser opto-ultrasonic dual detection for additive manufacturing. Materials 13(10):240410.3390/ma13102404 ↗
10. Turner R, Panwisawas C, Lu Y, Dhiman I, Basoalto H, Brooks J (2018) Neutron tomography methods applied to a nickel-based superalloy additive manufacture build. Mater Lett 230:109–11210.1016/j.matlet.2018.07.112 ↗
11. Preston D, Ashour A, Wright J, Watts J, Sanmartin D, Wood J (2023) Controlled creation of contact cracks in additive manufactured components. Appl Sci 13(21):1199010.3390/app132111990 ↗
12. Son TA, Minh PS, Thanh T (2020) Do: effect of 3D Printing parameters on the tensile strength of products. Key Eng Mater 861:101–10610.4028/www.scientific.net/KEM.861.101 ↗
13. Tomassoni C, Bozzi M (2020) Microwave components realized by additive manufacturing techniques. Radioengineering 29(1):1–9. https://doi.org/10.13164/re.2020.000110.13164/re.2020.0001 ↗
14. Cao J, Sun Z, Li J, Zhu Y, Yuan Z, Zhang Y, Li D, Wang L, Han W (2021) Microbe-assisted assembly of Ti3C2Tx MXene on fungi-derived nanoribbon heterostructures for ultrastable sodium and potassium ion storage. ACS Nano 15(2):3423–343310.1021/acsnano.0c10491 ↗
15. Kotasthane V, Tan Z, Yun J-W, Pentzer E, Lutkenhaus JL, Green MJ, Radović M (2023) Selective etching of Ti3AlC2 MAX phases using quaternary ammonium fluorides directly yields Ti3C2Tz MXene nanosheets: implications for energy storage. ACS Appl Nano Mater 6(2):1093–110510.1021/acsanm.2c04607 ↗
16. Huang Y, Lu Q, Wu D, Jiang Y, Liu Z, Chen B, Zhu M, Schmidt OG (2022) Flexible MXene films for batteries and beyond. Carbon Energy 4(4):598–62010.1002/cey2.200 ↗
17. Tang X, Guo X, Wu W, Wang G (2018) 2D metal carbides and nitrides (MXenes) as high-performance electrode materials for lithium-based batteries. Adv Energy Mater 8(33):180189710.1002/aenm.201801897 ↗
18. Zhan C, Sun W, Xie Y, Jiang D, Kent P (2019) Computational discovery and design of MXenes for energy applications: status. Successes, Oppor, ACS Appl Mater Interfaces 11(28):24885–2490510.1021/acsami.9b00439 ↗
19. Man Q, An Y, Shen H, Wei C, Zhang X, Wang Z, Xiong S, Feng J (2023) MXenes and their derivatives for advanced solid-state energy storage devices. Adv Funct Mater 33(41):230366810.1002/adfm.202303668 ↗
20. Sheikh N, Tahir MB, Fatima N, Sagir M, Pervaiz M, Tahir MS (2021) Recent advances in the rational design of 2D MXenes in energy conversion and storage systems. Int J Energy Res 45(14):20448–2046210.1002/er.7043 ↗
21. Xu X, Zhang Y, Sun H, Zhou J, Yang F, Li H, Chen H, Chen Y, Liu Z, Qiu Z, Da W, Ma L, Wang J, Zeng Q, Peng Z (2021) Progress and perspective: MXene and MXene-based nanomaterials for high-performance energy storage devices. Adv Electron Mater 7(7):200096710.1002/aelm.202000967 ↗
22. Huang W, Hu L, Tang Y, Xie Z, Zhang H (2020) Recent advances in functional 2D MXene-based nanostructures for next-generation devices. Adv Funct Mater 30(49):200522310.1002/adfm.202005223 ↗
23. Yi S, Wang L, Zhang X, Li C, Xu Y, Wang K, Sun X, Ma Y (2023) Recent advances in MXene-based nanocomposites for supercapacitors. Nanotechnology 34(43):43200110.1088/1361-6528/ace8a0 ↗
24. Yang SC, Lee YJ, Kang H, Kang YC (2021) Carbon-coated three-dimensional MXene/iron selenide ball with core-shell structure for high-performance potassium-ion batteries. Nano-Micro Lett 14(1):1710.1007/s40820-021-00741-0 ↗
25. Kim K, Song Y, Ahn H (2022) MXene framework-supported F, S, and Co ternary-doped tin dioxide hybrid structures for ultrafast and stable lithium-ion batteries. Int J Energy Res 46(8):11336–1134510.1002/er.7931 ↗
26. Ganesh A, Gupta N, Saha P, Bhattacharya P (2023) 3D printing of MXenes-based electrodes for energy storage applications. Recent Progr Mater 5(2):1–2310.21926/rpm.2302020 ↗
27. Xu J, Peng T, Zhang Q, Zheng H, Yu H, Shi S (2022) Intercalation effects on the electrochemical properties of Ti3C2Tx MXene nanosheets for high-performance supercapacitors. ACS Appl Nano Mater 5(7):8794–880310.1021/acsanm.2c00632 ↗
28. Tian J, Ji G, Han X, Xing F, Gao Q (2022) Advanced nanostructured MXene-based materials for high energy density lithium-sulfur batteries. Int J Mol Sci 23(11):632910.3390/ijms23116329 ↗
29. Shetti NP, Mishra A, Basu S, Aminabhavi TM, Alodhayb A, Pandiaraj S (2023) MXenes as li-ion battery electrodes: progress and outlook. Energy Fuels 37(17):12541–1255710.1021/acs.energyfuels.3c01346 ↗
30. Raza H, Bai S, Cheng J, Majumder S, Zhu H, Liu Q, Zheng G, Li X, Chen G (2023) Li-S batteries: challenges, achievements and opportunities. Electrochem Energy Rev 6:29. https://doi.org/10.1007/s41918-023-00188-410.1007/s41918-023-00188-4 ↗
31. Gohar GA, An L, Ali HM, Zhao H (2025) A study on chemical kinetics of carbonates-based electrolytes for enhancing fire safety in lithium-ion batteries:a review. J Energy Storage 131:117492. https://doi.org/10.1016/j.est.2025.11749210.1016/j.est.2025.117492 ↗
32. Zhu Q, Li J, Simon P, Xu B (2021) Two-dimensional MXenes for electrochemical capacitor applications: progress. Chall Perspect, Energy Storage Mater 35:630–66010.1016/j.ensm.2020.11.035 ↗
33. Sijuade AA, Eze VO, Arnett N, Okoli OI (2023) Vanadium MXenes materials for next-generation energy storage devices. Nanotechnology 34(25):25200110.1088/1361-6528/acc539 ↗
34. Zhang Q, Zhou J, Chen Z, Xu C, Tang W, Yang G, Lai C, Xu Q, Yang J, Peng C (2021) Direct ink writing of moldable electrochemical energy storage devices: ongoing progress, challenges, and prospects. Adv Eng Mater 23(7):2100068. https://doi.org/10.1002/adem.20210006810.1002/adem.202100068 ↗
35. Loh HA, Graves AR, Stinespring CD, Sierros KA (2019) Direct ink writing of graphene-based solutions for gas sensing. ACS Appl Nano Mater 2(7):4104–4112. https://doi.org/10.1021/acsanm.9b0057210.1021/acsanm.9b00572 ↗
36. Kang W, Zeng L, Ling S, Zhang C (2021) 3D printed supercapacitors toward trinity excellence in kinetics, energy density, and flexibility. Adv Energy Mater 11(12):2100020. https://doi.org/10.1002/aenm.20210002010.1002/aenm.202100020 ↗
37. Zhou G, Li M, Liu C, Wu Q, Mei C (2021) 3D printed Ti3C2Tx MXene/Cellulose nanofiber architectures for solid-state supercapacitors: ink rheology, 3D Printability, and electrochemical performance. Adv Funct Mater 32(14):2109593. https://doi.org/10.1002/adfm.20210959310.1002/adfm.202109593 ↗
38. Gu Y, Yu T, Zhang Q, Ma S, Xue P (2021) Direct ink printing for flexible zinc-ion-hybrid micro-supercapacitors based on hierarchical porous carbon as cathode. ChemElectroChem 8(23):4498–4508. https://doi.org/10.1002/celc.20210089010.1002/celc.202100890 ↗
39. Wei N, Yu L, Sun Z, Song Y, Wang M, Tian Z, Xiao Y, Cai J, Li Y, Zhao L, Li Q, Rümmeli MH, Liu Z (2019) Scalable salt-templated synthesis of nitrogen-doped graphene nanosheets toward printable energy storage. ACS Nano 13(7):7517–7526. https://doi.org/10.1021/acsnano.9b0315710.1021/acsnano.9b03157 ↗
40. Zhang M, Xu T, Wang D, Yao T, Xu Z, Liu Q, Shen L, Yu Y (2023) A 3D-printed proton pseudocapacitor with ultrahigh mass loading and areal energy density for fast energy storage at low temperature. Adv Mater 35(23):2209963. https://doi.org/10.1002/adma.20220996310.1002/adma.202209963 ↗
41. Zeng L (2023) Direct ink writing 3d printing for high-performance electrochemical energy storage devices: a minireview. Adv Sci 10(32):2303716. https://doi.org/10.1002/advs.20230371610.1002/advs.202303716 ↗
42. Meng T, Geng Z, Ma F, Wang XX, Zhang H, Guan C (2023) Direct Ink writing of metal-based electrocatalysts for Li–S batteries with efficient polysulfide conversion. Interdiscip Mater 2(4):589–608. https://doi.org/10.1002/idm2.1211010.1002/idm2.12110 ↗
43. Mubarak S, Dhamodharan D, Byun H-S (2023) Recent advances in 3D printed electrode materials for electrochemical energy storage devices. J Energy Chem 81:272–312. https://doi.org/10.1016/j.jechem.2023.01.03710.1016/j.jechem.2023.01.037 ↗
44. Antończak AJ, Wieczorek M, Dzienny P, Kryszak B, Krokos A, Gruber P, Olejarczyk M, Gazińska M (2022) First, do not degrade: an alternative view on polymer laser sintering. Addit Manuf 53:102715. https://doi.org/10.1016/j.addma.2022.10271510.1016/j.addma.2022.102715 ↗
45. Gazzerro A, Polini W, Sorrentino L (2021) Investigation on selective laser sintering of PA12: dimensional accuracy and mechanical performance. Rapid Prototyp J 27(5):1010–1019. https://doi.org/10.1108/rpj-06-2020-012510.1108/rpj-06-2020-0125 ↗
46. Guo Y, Li J, Guo Y, Zhang X, Wang Y (2023) Study of biomass composite workpiece support structure based on selective laser sintering technology. Materials (Basel) 16(13):4644. https://doi.org/10.3390/ma1613464410.3390/ma16134644 ↗
47. Kumar PS, Syed AGM (2020) Emerging trend in manufacturing of 3D biomedical components using selective laser sintering: a review. E3s Web Conf 184:01047. https://doi.org/10.1051/e3sconf/20201840104710.1051/e3sconf/202018401047 ↗
48. Pandian AK, Gautam SS, Selvaraj S (2021) Comparison of the bending fatigue performances of selective laser sintered and injection moulded nylon spur gears. Proc Inst Mech Eng L J Mater Des Appl 236(3):513–523. https://doi.org/10.1177/1464420721104737610.1177/14644207211047376 ↗
49. Vendittoli V (2023) Dimensional and geometric deviations of parts in PA12 manufactured by selective laser sintering: numerical and experimental analyses. Mater Res Proc 35:198–205. https://doi.org/10.21741/9781644902714-2410.1177/14644207211047376 ↗
50. Lomberg M, Boldrin P, Tariq F, Offer GJ, Wu B, Brandon NP (2015) Additive manufacturing for solid oxide cell electrode fabrication. ECS Trans 68(1):2119. https://doi.org/10.1149/06801.2119ecst10.1149/06801.2119ecst ↗
51. Zahid A, Anwar MT, Ahmed A, Raza Y, Gohar GA, Jamshaid M (2024) Synthesis and investigation of mechanical properties of the acrylonitrile butadiene styrene fiber composites using fused deposition modeling. 3D Print Addit Manuf 11:764–772. https://doi.org/10.1089/3dp.2022.019910.1089/3dp.2022.0199 ↗
52. Askari GH, Dar UA, Abid M, Nutkani MB, Pasha AR, Jamil AW Energy absorption and compression behaviour of polymeric 3D printed lattice structures: experimental and numerical study. In: 2021 International Bhurban conference on applied sciences and technologies (IBCAST). 198–203 (2021)10.1109/IBCAST51254.2021.9393216 ↗
53. Kuo C-C, Tsou Y-C (2016) A flexible and efficient system for removing support materials from rapid prototypes. Materialwiss Werkstofftech 47(7):635–645. https://doi.org/10.1002/mawe.20160033310.1002/mawe.201600333 ↗
54. Hock S, Rose M (2020) 3D‐structured monoliths of nanoporous polymers by additive manufacturing. Chem Ing Tech 92(5):525–531. https://doi.org/10.1002/cite.20190014910.1002/cite.201900149 ↗
55. Zhu G (2023) MXene decorated 3d-printed carbon black-based electrodes for solid-state micro-supercapacitors. J Mater Chem A 11:25422–25428. https://doi.org/10.1039/d3ta04573k10.1039/d3ta04573k ↗
56. Nyiranzeyimana G, Mutua J, Mose BR, Mbuya TO (2021) Optimization of process parameters in fused deposition modelling of thermoplastics: a review. Materialwiss Werkstofftech 52(6):682–694. https://doi.org/10.1002/mawe.20200019310.1002/mawe.202000193 ↗
57. Madhu NR, Erfani H, Jadoun S, Amir M, Thiagarajan Y, Singh Chauhan NP (2022) Fused deposition modelling approach using 3D printing and recycled industrial materials for a sustainable environment: a review. Int J Adv Manuf Technol 122:2125–2138. https://doi.org/10.1007/s00170-022-10048-y10.1007/s00170-022-10048-y ↗
58. Pan H, Shao Y, Yan P, Cheng Y, Han KS, Nie Z, Wang C, Yang J, Li X, Bhattacharya P, Mueller KT, Liu J (2016) Reversible aqueous zinc/manganese oxide energy storage from conversion reactions. Nat Energy 1:16039. https://doi.org/10.1038/nenergy.2016.3910.1038/nenergy.2016.39 ↗
59. Lutkenhaus JL, Flouda P (2020) Structural batteries take a load off. Sci Robot 5:eabd7026. https://doi.org/10.1126/scirobotics.abd702610.1126/scirobotics.abd7026 ↗
60. Hensleigh R, Cui H, Xu Z, Massman J, Yao D, Berrigan J, Zheng X (2020) Charge-programmed three-dimensional printing for multi-material electronic devices. Nat Electron 3:1–9. https://doi.org/10.1038/s41928-020-0391-210.1038/s41928-020-0391-2 ↗
61. Yan J, Huang S, Lim YV, Xu T, Kong D, Li X, Yang HY, Wang Y (2022) Direct-ink writing 3D printed energy storage devices: from material selectivity, design and optimization strategies to diverse applications. Mater Today 54:110–152. https://doi.org/10.1016/j.mattod.2022.03.01410.1016/j.mattod.2022.03.014 ↗
62. Zhang G, Zhao Y, Hu J, Liu H, Chen T, Yu H, Duan H (2022) Freestanding ultralight metallic micromesh for high-energy density flexible transparent supercapacitors. J Mater Chem A 10:22182–22193. https://doi.org/10.1039/D2TA06251H10.1039/D2TA06251H ↗
63. Chen T, Shuang Z, Hu J, Zhao Y, Wei D, Ye J, Zhang G, Duan H (2022) Freestanding 3D metallic micromesh for high-performance flexible transparent solid-state zinc batteries. Small 18:2201628. https://doi.org/10.1002/smll.20220162810.1002/smll.202201628 ↗
64. Su Y, Liu Z, Kim S, Wu J, Huang Y, Rogers JA (2012) Mechanics of stretchable electronics with high fill factors. Int J Solids Struct 49:3416–3421. https://doi.org/10.1016/j.ijsolstr.2012.07.02410.1016/j.ijsolstr.2012.07.024 ↗
65. Kim N, Kim J, Seo J, Hong C, Lee J (2022) Stretchable inorganic LED displays with double-layer modular design for high fill factor. ACS Appl Mater Interfaces 14:4344–4351. https://doi.org/10.1021/acsami.1c2316010.1021/acsami.1c23160 ↗
66. Rich SI, Lee S, Fukuda K, Someya T (2022) Developing the nondevelopable: creating curved-surface electronics from nonstretchable devices. Adv Mater 34:2106683. https://doi.org/10.1002/adma.20210668310.1002/adma.202106683 ↗
67. Zhao Q, Li C, Shum HC, Du X (2020) Shape-adaptable biodevices for wearable and implantable applications. Lab Chip 20:4321–4341. https://doi.org/10.1039/D0LC00569J10.1039/D0LC00569J ↗
68. Li Y, Zhu H, Shen F, Wan J, Lacey S, Fang Z, Dai H, Hu L (2015) Nanocellulose as green dispersant for two-dimensional energy materials. Nano Energy 13:346–354. https://doi.org/10.1016/j.nanoen.2015.02.01510.1016/j.nanoen.2015.02.015 ↗
69. Gong S, Cheng W (2017) Toward soft skin-like wearable and implantable energy devices. Adv Energy Mater 7:1700648. https://doi.org/10.1002/aenm.20170064810.1002/aenm.201700648 ↗
70. Kim S-H, Choe U-J, Kim N-Y, Lee S-Y (2022) Fibrous skeleton-framed, flexible high-energy-density quasi-solid-state lithium metal batteries. Battery Energy 1:20210012. https://doi.org/10.1002/bte2.2021001210.1002/bte2.20210012 ↗
71. Ma H, Tian X, Wang T, Tang K, Liu Z, Hou S, Jin H, Cao G (2021) Tailoring pore structures of 3D printed cellular high-loading cathodes for advanced rechargeable zinc-ion batteries. Small 17:2100746. https://doi.org/10.1002/smll.20210074610.1002/smll.202100746 ↗
72. Jiangtao H, Jiang Y, Cui S, Duan Y, Tongchao L, Guo H, Lin L, Lin Y, Zheng J, Amine K, Pan F (2016) Lithium-ion batteries: 3D-printed cathodes of LiMn1−xFexPO4 nanocrystals achieve both ultrahigh rate and high capacity for advanced lithium-ion battery. Adv Energy Mater 6(18):1600856. https://doi.org/10.1002/aenm.20167010510.1002/aenm.201670105 ↗
73. Ahn DB, Kim W-Y, Lee K-H, Lee S-S, Kim S-H, Park S, Hong Y-K, Lee S-Y (2023) Enabling on-demand conformal Zn-ion batteries on non-developable surfaces. Adv Func Mater 33:2211597. https://doi.org/10.1002/adfm.20221159710.1002/adfm.202211597 ↗
74. Liu Z, He H, Luo Z, Wang X, Zeng J (2023) 3D printing of customized MnO2 cathode for aqueous zinc-ion batteries. Trans Nonferrous Metals Soc China 33:1193–1204. https://doi.org/10.1016/S1003-6326(23)66175-810.1016/S1003-6326(23)66175-8 ↗
75. Mu Y, Chu Y, Pan L, Wu B, Zou L, He J, Han M, Zhao T, Zeng L (2023) 3D printing critical materials for rechargeable batteries: from materials, design and optimization strategies to applications. Int J Extreme Manuf 5:42008. https://doi.org/10.1088/2631-7990/acf17210.1088/2631-7990/acf172 ↗
76. Saeed G, Kang T, Byun JS, Min D, Kim JS, Sadavar SV, Park HS (2024) Two-dimensional (2D) materials for 3D printed micro-supercapacitors and micro-batteries. Energy Mater 4:400023. https://doi.org/10.20517/energymater.2023.8110.20517/energymater.2023.81 ↗
77. Tagliaferri S, Nagaraju G, Sokolikova M, Quintin-Baxendale R, Mattevi C (2024) 3D printing of layered vanadium disulfide for water-in-salt electrolyte zinc-ion batteries. Nanoscale Horiz 9:742–751. https://doi.org/10.1039/D3NH00576C10.1039/D3NH00576C ↗
78. Bi X, Peng Y, Liu S, Liu Y, Yang X, Feng K, Hu J (2024) Na3(VO)2(PO4)2F coated carbon nanotubes: A cathode material with high-specific capacity for aqueous Zinc-ion batteries. Electrochim Acta 475:143657. https://doi.org/10.1016/j.electacta.2023.14365710.1016/j.electacta.2023.143657 ↗
79. Zhang J, Li XL, Fan S, Huang S, Yan D, Liu L, Valdivia y Alvarado P, Yang HY (2020) 3D-printed functional electrodes towards Zn-Air batteries. Mater Today Energy 16:100407. https://doi.org/10.1016/j.mtener.2020.10040710.1016/j.mtener.2020.100407 ↗
80. Gao X, Liu K, Su C, Zhang W, Dai Y, Parkin IP, Carmalt CJ, He G (2024) From bibliometric analysis: 3D printing design strategies and battery applications with a focus on Zinc-ion batteries. SmartMat 5:e1197. https://doi.org/10.1002/smm2.119710.1002/smm2.1197 ↗
81. Idrees M, Batool S, Hu W, Chen D (2024) Additive manufacturing of grid reservoir-integrated anodes for dendrite-free, safe, and ultra-low voltage Zinc-Ion batteries. Small 20:2402266. https://doi.org/10.1002/smll.20240226610.1002/smll.202402266 ↗
82. Fu K, Wang Y, Yan C, Yao Y, Chen Y, Dai J, Lacey S, Wang Y, Wan J, Li T, Wang Z, Xu Y, Hu L (2016) Graphene oxide-based electrode inks for 3D-printed lithium-ion batteries. Adv Mater 28:2587–2594. https://doi.org/10.1002/adma.20150539110.1002/adma.201505391 ↗
83. Ferrand A, Siaj M, Claverie JP (2020) Graphene, the Swiss Army Knife of nanomaterials science. ACS Appl Nano Mater 3:7305–7313. https://doi.org/10.1021/acsanm.0c0205510.1021/acsanm.0c02055 ↗
84. Wu J, Yuan C, Li T, Yuan Z, Zhang H, Li X (2021) Dendrite-free zinc-based battery with high areal capacity via the region-induced deposition effect of turing membrane. Chem Soc 143(33):13135–1314410.1021/jacs.1c04317 ↗
85. Worku AK (2022) Engineering techniques to dendrite free zinc-based rechargeable batteries. Front Chem 10:101846110.3389/fchem.2022.1018461 ↗
86. Shi Y, Chen Y, Shi L, Wang K, Wang B, Li L, Ma Y, Li Y, Sun Z, Ali W, Ding S (2020) An overview and future perspectives of rechargeable zinc batteries. Small 16(23):200073010.1002/smll.202000730 ↗
87. Cui B-F, Han X, Hu W (2021) Micronanostructured design of dendrite-free zinc anodes and their applications in aqueous zinc-based rechargeable batteries. Small Struct 2(6):200012810.1002/sstr.202000128 ↗
88. Lü W, Xie C-M, Zhang H, Li X (2018) Inhibition of zinc dendrite growth in zinc-based batteries. Chemsuschem 11(23):3996–400610.1002/cssc.201801657 ↗
89. Wang K, Yu X, Pei P, Liu X, Wang Y (2019) A phase-field model of dendrite growth of electrodeposited zinc. J Electrochem Soc 166(10):D389–D394610.1149/2.0541910jes ↗
90. Herrmann NJ, Euchner H, Groß A, Horstmann B (2023) The cycling mechanism of manganese-oxide cathodes in zinc batteries: a theory-based approach. Adv Energy Mater 14(1):230255310.1002/aenm.202302553 ↗
91. Hu L, Xu X (2023) Current pulse-based measurement technique for zinc-air battery parameters. Energies 16(18):644810.3390/en16186448 ↗
92. Zhao P, Zhang L, Chen J, Qiu C, Wang B, Li J, Zhang K, Yang G (2024) From wood to flexible Zn-air battery: Fe3O4 nanoparticles synergistic single iron atoms on N-doped carbon nanosheets electrocatalyst and Lignosulfonate-functionalized gel electrolyte. Chem Eng J 484:14941510.1016/j.cej.2024.149415 ↗
93. He J, Zhou W, Li J, Chen S, Zhu D, Chen Y (2024) Bifunctional interface of metal–organic framework synergized with bismuth endows high stable zinc anode. Chem Eng J 485:14974010.1016/j.cej.2024.149740 ↗
94. Hao W, Guo F, Li J, Xie J (2026) Influence of physical parameters on lithium dendrite growth based on phase field theory. Metals 16(1):41. https://doi.org/10.3390/met1601004110.3390/met16010041 ↗
95. Dijkshoorn A, Sculac L, Sanders RGP, Olthuis W, Krijnen G 3d-printing of a lemon battery via fused deposition modelling and electrodeposition. In: 2020 IEEE International Conference on Flexible and Printable Sensors and Systems (FLEPS). IEEE, pp 1–410.1109/FLEPS49123.2020.9239462 ↗
96. Luo X, Cheng H, Wu X (2023) Nanomaterials reinforced polymer filament for fused deposition modeling: a state-of-the-art review. Polymers 15(14):298010.3390/polym15142980 ↗
97. Bardot MI, Schülz M (2020) Biodegradable poly(lactic acid) nanocomposites for fused deposition modeling 3D printing. Nanomaterials 10(12):256710.3390/nano10122567 ↗
98. Gao W, Michalička J, Pumera M (2022) Hierarchical atomic layer deposited V2O5 on 3D printed nanocarbon electrodes for high-performance aqueous zinc-ion batteries. Small 18:2105572. https://doi.org/10.1002/smll.20210557210.1002/smll.202105572 ↗
99. Naveed A, Bukhari SMA, Husnain N, Anwar MT, Asghar MR, Rasheed T (2025) 6 - innovative approaches to polymer nanocomposite synthesis for 3D printing. In: Hussain CM, Deshmukh K (eds) Additive manufacturing of functional polymers and nanocomposites. Woodhead Publishing, pp 159–18410.1016/B978-0-443-26516-7.00006-7 ↗
100. Shah SKH, Sajjad R, Hussain M, Anwar MT, Nawaz MS, Raza MR (2025) 12 - additive manufacturing of functional polymers and nanocomposites for soft robotics. In: Hussain CM, Deshmukh K (eds) Additive manufacturing of functional polymers and nanocomposites. Woodhead Publishing, pp 333–35010.1016/B978-0-443-26516-7.00012-2 ↗