journal article·2026-06

Rejuvenating the creep life of modified 9Cr–1Mo steel using a short-term heat treatment

Amey Parnaik, Manish Verma, Kishor Kaushal Kumar, Kai Chen, A. H. V. Pavan, R. L. Narayan

Journal of Materials Science· Volume 61· Issue 21
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Pandey C, Mahapatra MM, Kumar P, Saini N (2018) Some studies on P91 steel and their weldments. J Alloys Compd 743:332–364. https://doi.org/10.1016/j.jallcom.2018.01.12010.1016/j.jallcom.2018.01.120 ↗
2. Lucacci G (2017) Steels and alloys for turbine blades in ultra-supercritical power plants. Mater Ultra-Supercrit Adv Ultra-Supercrit Power Plants 175-196. https://doi.org/10.1016/B978-0-08-100552-1.00007-510.1016/B978-0-08-100552-1.00007-5 ↗
3. Zhang K, Shen Z, Li J et al (2026) Anomalous oxidation behavior and enhanced corrosion resistance of a lean-Cr FeCrAl alloy in the oxygenated PWR primary water. Corros Sci 259:113452. https://doi.org/10.1016/j.corsci.2025.11345210.1016/j.corsci.2025.113452 ↗
4. Payton EJ, Aghajani A, Otto F et al (2012) On the nature of internal interfaces in a tempered martensite ferritic steel and their evolution during long-term creep. Scr Mater 66:1045–1048. https://doi.org/10.1016/J.SCRIPTAMAT.2012.02.04210.1016/J.SCRIPTAMAT.2012.02.042 ↗
5. Pandey C, Mahapatra MM, Kumar P, Saini N (2018) Some studies on P91 steel and their weldments. J Alloys Compd. 743:332-364. https://doi.org/10.1016/j.jallcom.2018.01.12010.1016/j.jallcom.2018.01.120 ↗
6. Sawada K, Takeda M, Maruyama K et al (1999) Effect of W on recovery of lath structure during creep of high chromium martensitic steels. Mater Sci Eng A 267:19–25. https://doi.org/10.1016/S0921-5093(99)00066-010.1016/S0921-5093(99)00066-0 ↗
7. Abe F (2004) Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr–W steels. Mater Sci Eng A 387–389:565–569. https://doi.org/10.1016/J.MSEA.2004.01.05710.1016/J.MSEA.2004.01.057 ↗
8. Dudko V, Belyakov A, Kaibyshev R (2017) Evolution of lath substructure and internal stresses in a 9% Cr steel during creep. ISIJ Int 57:540–549. https://doi.org/10.2355/ISIJINTERNATIONAL.ISIJINT-2016-33410.2355/ISIJINTERNATIONAL.ISIJINT-2016-334 ↗
9. Wang Y, Zhou Z, Lu J et al (2026) Effect of Si addition on the oxidation of a 12Cr1Al ODS alloy in liquid LBE. Prog Nucl Energy 193:106226. https://doi.org/10.1016/j.pnucene.2025.10622610.1016/j.pnucene.2025.106226 ↗
10. Xiao B, Xu L, Zhao L et al (2018) Creep properties, creep deformation behavior, and microstructural evolution of 9Cr-3W-3Co-1CuVNbB martensite ferritic steel. Mater Sci Eng A 711:434–447. https://doi.org/10.1016/J.MSEA.2017.11.06110.1016/J.MSEA.2017.11.061 ↗
11. Parnaik A, Pavan AHV, Das A et al (2024) On enhancing the creep performance of modified 9Cr–1Mo steel by employing a secondary short-term heat treatment. J Mater Sci 59:21494–21514. https://doi.org/10.1007/S10853-024-10439-4/FIGURES/1210.1007/S10853-024-10439-4/FIGURES/12 ↗
12. Xiao B, Yadav SD, Zhao L et al (2021) Deep insights on the creep behavior and mechanism of a novel G115 steel: micromechanical modeling and experimental validation. Int J Plast 147:103124. https://doi.org/10.1016/J.IJPLAS.2021.10312410.1016/J.IJPLAS.2021.103124 ↗
13. Pandey C, Mahapatra MM, Kumar P et al (2017) Microstructure-based assessment of creep rupture behaviour of cast-forged P91 steel. Mater Sci Eng A 695:291–301. https://doi.org/10.1016/J.MSEA.2017.04.03710.1016/J.MSEA.2017.04.037 ↗
14. Shrestha T, Basirat M, Charit I et al (2012) Creep deformation mechanisms in modified 9Cr–1Mo steel. J Nucl Mater 423:110–119. https://doi.org/10.1016/J.JNUCMAT.2012.01.00510.1016/J.JNUCMAT.2012.01.005 ↗
15. Maruyama K, Sawada K, Koike JI (2001) Strengthening mechanisms of creep resistant tempered martensitic steel. ISIJ Int 41:641–653. https://doi.org/10.2355/ISIJINTERNATIONAL.41.64110.2355/ISIJINTERNATIONAL.41.641 ↗
16. Maccagno TM, Koul AK, Immarigeon JP et al (1990) Microstructure, creep properties, and rejuvenation of service-exposed alloy 713C turbine blades. Metall Trans A Phys Metall Mater Sci A 21:3115–3125. https://doi.org/10.1007/BF02647308/METRICS10.1007/BF02647308/METRICS ↗
17. Lvova E, Norsworthy D (2001) Influence of service-induced microstructural changes on the aging kinetics of rejuvenated Ni-based superalloy gas turbine blades. J Mater Eng Perform 10:299–313. https://doi.org/10.1361/10599490177034501510.1361/105994901770345015 ↗
18. Koul AK, Castillo R (1988) Assessment of service induced microstructural damage and its rejuvenation in turbine blades. Metall Trans A 19:2049–2066. https://doi.org/10.1007/BF0264520810.1007/BF02645208 ↗
19. Zhou Y, Zhang Z, Zhao Z, Zhong Q (2013) Effects of HIP temperature on the microstructural evolution and property restoration of a Ni-based superalloy. J Mater Eng Perform 22:215–222. https://doi.org/10.1007/S11665-012-0246-810.1007/S11665-012-0246-8 ↗
20. Wang L, Yang XG, Qi HY et al (2021) Microstructural evolution and restoration of creep property for a damaged K403 alloy after rejuvenation heat treatments. Rare Met 40:1865–1871. https://doi.org/10.1007/S12598-020-01434-0/FIGURES/910.1007/S12598-020-01434-0/FIGURES/9 ↗
21. Baldan A (1991) Rejuvenation procedures to recover creep properties of nickel-base superalloys by heat treatment and hot isostatic pressing techniques. J Mater Sci 26(13):3409–3421. https://doi.org/10.1007/BF0055712610.1007/BF00557126 ↗
22. Panait CG, Zielińska-Lipiec A, Koziel T et al (2010) Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600 °C for more than 100,000 h. Mater Sci Eng A 527:4062–4069. https://doi.org/10.1016/J.MSEA.2010.03.01010.1016/J.MSEA.2010.03.010 ↗
23. Nyyssönen T, Gazder AA, Hielscher R, Niessen F (2023) Habit plane determination from reconstructed parent phase orientation maps. Acta Mater 255:119035. https://doi.org/10.1016/J.ACTAMAT.2023.11903510.1016/J.ACTAMAT.2023.119035 ↗
24. Morito S, Tanaka H, Konishi R et al (2003) The morphology and crystallography of lath martensite in Fe–C alloys. Acta Mater 51:1789–1799. https://doi.org/10.1016/S1359-6454(02)00577-310.1016/S1359-6454(02)00577-3 ↗
25. Niessen F, Nyyssönen T, Gazder AA, Hielscher R (2022) Parent grain reconstruction from partially or fully transformed microstructures in MTEX. J Appl Crystallogr 55:180–194. https://doi.org/10.1107/S160057672101156010.1107/S1600576721011560 ↗
26. Fischer T, Zhou T, Dahlberg CFO, Hedström P (2024) Relating stress/strain heterogeneity to lath martensite strength by experiments and dislocation density-based crystal plasticity. Int J Plast 174:103917. https://doi.org/10.1016/J.IJPLAS.2024.10391710.1016/J.IJPLAS.2024.103917 ↗
27. Kimura K, Kushima H, Sawada K (2009) Long-term creep deformation property of modified 9Cr–1Mo steel. Mater Sci Eng A 510–511:58–63. https://doi.org/10.1016/J.MSEA.2008.04.09510.1016/J.MSEA.2008.04.095 ↗
28. Parnaik A, Pavan AHV, Silchonok SS et al (2024) High-cycle fatigue behavior of Haynes 282 superalloy subjected to accelerated ageing. Int J Fatigue 182:108234. https://doi.org/10.1016/J.IJFATIGUE.2024.10823410.1016/J.IJFATIGUE.2024.108234 ↗
29. Tamura M, Abe F, Shiba K et al (2013) Larson-miller constant of heat-resistant steel. Metall Mater Trans A Phys Metall Mater Sci 44:2645–2661. https://doi.org/10.1007/S11661-013-1631-0/FIGURES/2210.1007/S11661-013-1631-0/FIGURES/22 ↗
30. Erami M, Daei-Sorkhabi AH, Vakili-Tahami F (2019) Creep constitutive equations for as-received 9Cr1Mo steel. Int J Press Vessel Pip 176:103947. https://doi.org/10.1016/J.IJPVP.2019.10394710.1016/J.IJPVP.2019.103947 ↗
31. Isik MI, Kostka A, Eggeler G (2014) On the nucleation of Laves phase particles during high-temperature exposure and creep of tempered martensite ferritic steels. Acta Mater 81:230–240. https://doi.org/10.1016/J.ACTAMAT.2014.08.00810.1016/J.ACTAMAT.2014.08.008 ↗
32. Isik MI, Kostka A, Yardley VA et al (2015) The nucleation of Mo-rich Laves phase particles adjacent to M23C6 micrograin boundary carbides in 12% Cr tempered martensite ferritic steels. Acta Mater 90:94–104. https://doi.org/10.1016/J.ACTAMAT.2015.01.02710.1016/J.ACTAMAT.2015.01.027 ↗
33. Xiao B, Xu L, Zhao L et al (2018) Transient creep behavior of a novel tempered martensite ferritic steel G115. Mater Sci Eng A 716:284–295. https://doi.org/10.1016/J.MSEA.2018.01.04710.1016/J.MSEA.2018.01.047 ↗
34. Du Y, Li X, Zhang XU et al (2019) Design and characterization of a heat-resistant ferritic steel strengthened by MX precipitates. Metall Mater Trans A Phys Metall Mater Sci.51:638-647. https://doi.org/10.1007/s11661-019-05525-110.1007/s11661-019-05525-1 ↗
35. Xu Y, Li W, Wang M et al (2019) Nano-sized MX carbonitrides contribute to the stability of mechanical properties of martensite ferritic steel in the later stages of long-term aging. Acta Mater 175:148–159. https://doi.org/10.1016/J.ACTAMAT.2019.06.01210.1016/J.ACTAMAT.2019.06.012 ↗
36. Panait CG, Zielińska-Lipiec A, Koziel T et al (2010) Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600 °C for more than 100,000 h. Mater Sci Eng A 527:4062–4069. https://doi.org/10.1016/J.MSEA.2010.03.01010.1016/J.MSEA.2010.03.010 ↗
37. Zhang XZ, Wu XJ, Liu R et al (2017) Deformation-mechanism-based modeling of creep behavior of modified 9Cr–1Mo steel. Mater Sci Eng A 689:345–352. https://doi.org/10.1016/J.MSEA.2017.02.04410.1016/J.MSEA.2017.02.044 ↗
38. Xu W, Zhang B, Li XY, Lu K (2021) Suppressing atomic diffusion with the Schwarz crystal structure in supersaturated Al–Mg alloys. Science (1979) 373:683–687. https://doi.org/10.1126/science.abh070010.1126/science.abh0700 ↗
39. Xu W, Xin YC, Zhang B, Li XY (2022) Stress corrosion cracking resistant nanostructured Al–Mg alloy with low angle grain boundaries. Acta Mater 225:117607. https://doi.org/10.1016/j.actamat.2021.11760710.1016/j.actamat.2021.117607 ↗
40. Xu W, Zhang B, Du K et al (2022) Thermally stable nanostructured Al–Mg alloy with relaxed grain boundaries. Acta Mater 226:117640. https://doi.org/10.1016/j.actamat.2022.11764010.1016/j.actamat.2022.117640 ↗
41. Huo PD, Huang LK, Song KX et al (2025) High-density metastable annealing twin boundaries-induced extraordinary strain hardening in ultrafine-grained high-entropy alloy. Acta Mater 295:121205. https://doi.org/10.1016/j.actamat.2025.12120510.1016/j.actamat.2025.121205 ↗
42. Morsdorf L, Jeannin O, Barbier D et al (2016) Multiple mechanisms of lath martensite plasticity. Acta Mater 121:202–214. https://doi.org/10.1016/J.ACTAMAT.2016.09.00610.1016/J.ACTAMAT.2016.09.006 ↗
43. Hanlumyuang Y, Gordon PA, Neeraj T, Chrzan DC (2010) Interactions between carbon solutes and dislocations in bcc iron. Acta Mater 58:5481–5490. https://doi.org/10.1016/J.ACTAMAT.2010.06.02410.1016/J.ACTAMAT.2010.06.024 ↗
44. Hu SY, Li YL, Zheng YX, Chen LQ (2004) Effect of solutes on dislocation motion—a phase-field simulation. Int J Plast 20:403–425. https://doi.org/10.1016/S0749-6419(03)00094-910.1016/S0749-6419(03)00094-9 ↗
45. Lu Y, Yu H, Sisson RD (2017) The effect of carbon content on the c/a ratio of as-quenched martensite in Fe–C alloys. Mater Sci Eng A 700:592–597. https://doi.org/10.1016/J.MSEA.2017.05.09410.1016/J.MSEA.2017.05.094 ↗
46. Tian Y, Lu D, Wang W et al (2026) Combining strain-assisted nanoprecipitation with nanotwins to enhance strength of laser additively manufactured high-entropy alloys. Mater Charact 234:116192. https://doi.org/10.1016/j.matchar.2026.11619210.1016/j.matchar.2026.116192 ↗
47. Yadav SD, Sonderegger B, Stracey M, Poletti C (2016) Modelling the creep behaviour of tempered martensitic steel based on a hybrid approach. Mater Sci Eng A 662:330–341. https://doi.org/10.1016/J.MSEA.2016.03.07110.1016/J.MSEA.2016.03.071 ↗
48. James A (2001) Review of rejuvenation process for nickel base superalloys. Mater Sci Technol 17:481–486. https://doi.org/10.1179/02670830110151016810.1179/026708301101510168 ↗