journal article·2026-06Open access

Electrical resistivity of microstructural components in Al–Mg-Si alloys

Gautam Kumar, Amram Azulay, Avia Greenberg, Omer Coriat, Hanna Bishara

Journal of Materials Science· Volume 61· Issue 21

Abstract

Abstract Al–Mg–Si alloys are utilized in large-scale electrical conduction applications thanks to their low density, high strength, and low electrical resistivity. The alloying elements, Mg and Si, are introduced to improve the mechanical strength; however, the formed defects also suppress electrical conductivity, adversely affecting the material performance. Here, we investigate the impact of alloying, heat treatment, and the corresponding microstructure, on the electrical resistivity of overaged alloys having 0.5–9.5 at. % solute. The crystal structure, composition, and microstructure are characterized by X-ray diffraction, energy-dispersive X-ray spectroscopy, electron backscatter diffraction, and scanning electron microscopy (SEM). The electrical resistivity of the microstructural components, i.e., the Al solid solution matrix and the Si and Mg 2 Si precipitates, is directly measured using a microscale four-point probe setup inside the SEM. We find that the Al solid solution matrix is up to 15% more resistive than pure Al, depending on the heat treatment rather than the composition, and that regions including Si or Mg 2 Si precipitates are equally resistive. Additionally, the bulk alloy resistivity, measured conventionally on a macroscopic length scale, increases linearly up to 60% with increasing total solute concentration up to ~ 10 at. %. This study relates the electrical resistivity of Al–Mg–Si alloys, measured at microscopic and macroscopic length scales, with their microstructure and composition.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Czerwinski F (2024) Aluminum alloys for electrical engineering: a review. J Mater Sci 59:14847–14892. https://doi.org/10.1007/s10853-024-09890-010.1007/s10853-024-09890-0 ↗
2. Wang Y, Zhu L, Niu G, Mao J (2021) Conductive Al alloys: the contradiction between strength and electrical conductivity. Adv Eng Mater 23:2001249. https://doi.org/10.1002/adem.20200124910.1002/adem.202001249 ↗
3. Ye H, Cui X, Li X, Cui H, Zhang B, Li H, Pan Y, Feng R, Wu Y, Liu X (2021) Fabrication of hypoeutectic Al-4Si alloy with high electrical conductivity, high plasticity and medium strength by the dual treatment of Al matrix and eutectic Si microstructure. J Alloys Compd 885:161117. https://doi.org/10.1016/j.jallcom.2021.16111710.1016/j.jallcom.2021.161117 ↗
4. Cui X, Cui H, Wu Y, Liu X (2019) The improvement of electrical conductivity of hypoeutectic Al-Si alloys achieved by composite melt treatment. J Alloys Compd 788:1322–1328. https://doi.org/10.1016/j.jallcom.2019.02.24210.1016/j.jallcom.2019.02.242 ↗
5. Belov NA, Akopyan TK, Korotkova NO, Shurkin PK, Timofeev VN, Raznitsyn OA, Sviridova TA (2022) Structure and heat resistance of high strength Al–3.3%Cu–2.5%Mn–0.5%Zr (wt%) conductive wire alloy manufactured by electromagnetic casting. J Alloys Compd 891:161948. https://doi.org/10.1016/j.jallcom.2021.16194810.1016/j.jallcom.2021.161948 ↗
6. Khangholi SN, Javidani M, Maltais A, Chen XG (2022) Review on recent progress in Al–Mg–Si 6xxx conductor alloys. J Mater Res 37:670–691. https://doi.org/10.1557/S43578-022-00488-3/FIGURES/1010.1557/S43578-022-00488-3/FIGURES/10 ↗
7. Sauvage X, Bobruk EV, Murashkin MY, Nasedkina Y, Enikeev NA, Valiev RZ (2015) Optimization of electrical conductivity and strength combination by structure design at the nanoscale in Al–Mg–Si alloys. Acta Mater 98:355–366. https://doi.org/10.1016/J.ACTAMAT.2015.07.03910.1016/J.ACTAMAT.2015.07.039 ↗
8. Dong Q, Wang R, Wang J, Nagaumi H (2025) Influence of Mg/Si ratio on the mechanical strength and electrical conductivity of Al-Mg-Si alloys. Mater Today Commun 42:111439. https://doi.org/10.1016/j.mtcomm.2024.11143910.1016/j.mtcomm.2024.111439 ↗
9. Sunde JK, Marioara CD, Wenner S, Holmestad R (2021) On the microstructural origins of improvements in conductivity by heavy deformation and ageing of Al-Mg-Si alloy 6101. Mater Charact 176:111073. https://doi.org/10.1016/J.MATCHAR.2021.11107310.1016/J.MATCHAR.2021.111073 ↗
10. Alshwawreh N, Alhamarneh B, Altwarah Q, Quandour S, Barghout S, Ayasrah O (2021) Electrical resistivity and tensile strength relationship in heat-treated all aluminum alloy wire conductors. Materials Basel 14:5738. https://doi.org/10.3390/ma1419573810.3390/ma14195738 ↗
11. Khangholi SN, Javidani M, Maltais A, Chen XG (2022) Review on recent progress in Al–Mg–Si 6xxx conductor alloys. J Mater Res 37:670–691. https://doi.org/10.1557/s43578-022-00488-310.1557/s43578-022-00488-3 ↗
12. Huang Y, Liu Y, Xiao Z, Huang Y (2023) A trade-off between mechanical strength and electrical conductivity of Al–Zn–Mg–Cu alloy via Ag alloying and retrogression re-aging heat treatment. Mater Sci Eng, A 880:145230. https://doi.org/10.1016/j.msea.2023.14523010.1016/j.msea.2023.145230 ↗
13. Wang Y, Guo Y, Liao W, Chen Y, Zhang W, Zhang Z (2025) Fracture mechanisms and mechanical performance of aluminum conductor alloy reinforced wires in high-voltage transmission lines. J Mater Eng Perform 34:18095–18109. https://doi.org/10.1007/s11665-024-10472-z10.1007/s11665-024-10472-z ↗
14. Zhang J, Peng J (2023) A review on aluminum alloy conductors influenced by alloying elements and thermomechanical treatments: microstructure and properties. J Mater Res 38:1488–1509. https://doi.org/10.1557/s43578-023-00891-410.1557/s43578-023-00891-4 ↗
15. Güzel D, Kaiser T, Bishara H, Dehm G, Menzel A (2024) Revisiting Andrews method and grain boundary resistivity from a computational multiscale perspective. Mech Mater 198:105115. https://doi.org/10.1016/J.MECHMAT.2024.10511510.1016/J.MECHMAT.2024.105115 ↗
16. Ólafsson P, Sandström R (2001) Calculations of electrical resistivity for Al–Cu and Al–Mg–Si alloys. Mater Sci Technol 17:655–662. https://doi.org/10.1179/02670830110151052810.1179/026708301101510528 ↗
17. Dong Q, Zhang Y, Wang J, Huang L, Nagaumi H (2024) Enhanced strength-conductivity trade-off in Al-Mg-Si alloys with optimized Mg/Si ratio. J Alloys Compd 970:172682. https://doi.org/10.1016/J.JALLCOM.2023.17268210.1016/J.JALLCOM.2023.172682 ↗
18. Raeisinia B, Poole WJ, Lloyd DJ (2006) Examination of precipitation in the aluminum alloy AA6111 using electrical resistivity measurements. Mater Sci Eng A Struct Mater 420:245–249. https://doi.org/10.1016/J.MSEA.2006.01.04210.1016/J.MSEA.2006.01.042 ↗
19. Fickett FR (1971) Aluminum—1. A review of resistive mechanisms in aluminum. Cryogenics (Guildf) 11:349–367. https://doi.org/10.1016/0011-2275(71)90036-110.1016/0011-2275(71)90036-1 ↗
20. Khangholi SN, Javidani M, Maltais A, Chen XG (2020) Optimization of mechanical properties and electrical conductivity in Al-Mg-Si 6201 alloys with different Mg/Si ratios. J Mater Res 35:2765–2776. https://doi.org/10.1557/jmr.2020.24910.1557/jmr.2020.249 ↗
21. Raeisinia B, Poole WJ, Lloyd DJ (2006) Examination of precipitation in the aluminum alloy AA6111 using electrical resistivity measurements. Mater Sci Eng, A 420:245–249. https://doi.org/10.1016/j.msea.2006.01.04210.1016/j.msea.2006.01.042 ↗
22. Han Y, Shao D, Chen BA, Peng Z, Zhu ZX, Zhang Q, Chen X, Liu G, Li XM (2017) Effect of Mg/Si ratio on the microstructure and hardness–conductivity relationship of ultrafine-grained Al–Mg–Si alloys. J Mater Sci 52:4445–4459. https://doi.org/10.1007/s10853-016-0691-010.1007/s10853-016-0691-0 ↗
23. Coriat O, Azulay A, Popov V, Bishara H (2026) Interfacial resistivity of precipitate-decorated grain boundaries: a case study of additively manufactured Al-Si alloys. J Alloys Compd 1050:185794. https://doi.org/10.1016/j.jallcom.2025.18579410.1016/j.jallcom.2025.185794 ↗
24. Bishara H, Langenohl L, Zhou X, Gault B, Best JP, Dehm G (2023) Decoupling the electrical resistivity contribution of grain boundaries in dilute Fe-alloyed Cu thin films. Scr Mater. https://doi.org/10.1016/j.scriptamat.2023.11539310.1016/j.scriptamat.2023.115393 ↗
25. Luo T, Serrano-Sánchez F, Bishara H, Zhang S, Bueno Villoro R, Kuo JJ, Felser C, Scheu C, Snyder GJ, Best JP, Dehm G, Yu Y, Raabe D, Fu C, Gault B (2021) Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance. Acta Mater 217:117147. https://doi.org/10.1016/j.actamat.2021.11714710.1016/j.actamat.2021.117147 ↗
26. Gomell L, Roscher M, Bishara H, Jägle EA, Scheu C, Gault B (2021) Properties and influence of microstructure and crystal defects in Fe2VAl modified by laser surface remelting. Scr Mater 193:153–157. https://doi.org/10.1016/j.scriptamat.2020.10.05010.1016/j.scriptamat.2020.10.050 ↗
27. Bishara H, Ghidelli M, Dehm G (2020) Approaches to measure the resistivity of grain boundaries in metals with high sensitivity and spatial resolution: a case study employing Cu. ACS Appl Electron Mater 2:2049–2056. https://doi.org/10.1021/acsaelm.0c0031110.1021/acsaelm.0c00311 ↗
28. Chakraborti N, Lukas HL (1992) Thermodynamic optimization of the Mg-Al-Si phase diagram. Calphad 16:79–86. https://doi.org/10.1016/0364-5916(92)90041-U10.1016/0364-5916(92)90041-U ↗
29. J. Zhang, F. Z., W. Y.Q., B.L. and Zhou (2001) Equilibrium pseudobinary Al–Mg2Si phase diagram. Mater Sci Technol 17: 494–496. https://doi.org/10.1179/02670830110151031110.1179/026708301101510311 ↗
30. Kaygısız Y, Maraşlı N (2015) Microstructural, mechanical and electrical characterization of directionally solidified Al–Si–Mg eutectic alloy. J Alloys Compd 618:197–203. https://doi.org/10.1016/j.jallcom.2014.08.05610.1016/j.jallcom.2014.08.056 ↗
31. Sekhar AP, Mandal AB, Das D (2020) Mechanical properties and corrosion behavior of artificially aged Al-Mg-Si alloy. J Mater Res Technol 9:1005–1024. https://doi.org/10.1016/j.jmrt.2019.11.04010.1016/j.jmrt.2019.11.040 ↗
32. Meyruey G, Massardier V, Lefebvre W, Perez M (2018) Over-ageing of an Al-Mg-Si alloy with Silicon excess. Mater Sci Eng A 730:92–105. https://doi.org/10.1016/j.msea.2018.05.09410.1016/j.msea.2018.05.094 ↗
33. Bahrami A, Yazdan Mehr M (2019) Modeling electrical resistivity of naturally aged Al–Mg–Si alloys. Metals Basel 9:310. https://doi.org/10.3390/met903031010.3390/met9030310 ↗
34. Bashir N, Iqbal A (2024) Characterizing laser-modified microstructures and electrical and mechanical properties of Al-15.3%Si(wt.%) alloys. J Mater Eng Perform 33:2196–2208. https://doi.org/10.1007/s11665-023-08148-110.1007/s11665-023-08148-1 ↗
35. Takeda M, Ohkubo F, Shirai T, Fukui K (1998) Stability of metastable phases and microstructures in the ageing process of Al–Mg–Si ternary alloys. J Mater Sci 33:2385–2390. https://doi.org/10.1023/A:100435582485710.1023/A:1004355824857 ↗
36. Cebotari V, Popa F, Marinca TF, Neamţu BV, Sechel NA, Galatanu M, Galatanu A, Chicinaș I (2023) Obtaining and characterisation of thermoelectric Mg2Si compound via wet and dry mechanical alloying and spark plasma sintering. J Mater Res Technol 26:8904–8914. https://doi.org/10.1016/j.jmrt.2023.09.16710.1016/j.jmrt.2023.09.167 ↗
37. Fulkerson W, Moore JP, Williams RK, Graves RS, McElroy DL (1968) Thermal conductivity, electrical resistivity, and Seebeck coefficient of silicon from 100 to 1300\ifmmode^\circ\else\textdegree\fi{}K. Phys Rev 167:765–782. https://doi.org/10.1103/PhysRev.167.76510.1103/PhysRev.167.765 ↗