Influence of surface modification on biomimetic apatite deposition on glassy carbon: an in vitro study
Source abstract
Abstract
Abstract In this in vitro study, glassy carbon (GC) substrates measuring approximately 1 cm × 0.5 cm were immersed in 1.5 × simulated body fluid (SBF), a supersaturated solution, to enable the formation biomimetic apatite coatings. Prior to immersion, the GC substrates were subjected to surface pre-treatments, one set was mechanical polished and another set was plasma etched. The pre-treated samples were then immersed in the SBF for 56 days to allow apatite deposition under controlled conditions. Structural, chemical, and mechanical characteristics of the resulting coatings were systematically investigated using atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and microfocus X-ray computed tomography (micro-CT). The plasma-etched surface showed a more dense and uniform apatite layer formed. It also had a higher Ca and P wt % however a lower crystallinity index compared to the polished sample. Micro-CT revealed increased coating porosity on the plasma-etched substrate indicating differences in coating architecture and interfacial characteristics. AFM also revealed plasma etching to increase the surface roughness and adhesion of the surface, suggesting improved coating-substrate interfacial stability.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Planetary Science and Exploration
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Jurkiewicz K, Pawlyta M, Zygadło D, Chrobak D, Duber S, Wrzalik R, Ratuszna A, Burian A (2018) Evolution of glassy carbon under heat treatment: correlation structure–mechanical properties. J Mater Sci 53:3509–3523. https://doi.org/10.1007/s10853-017-1753-710.1007/s10853-017-1753-7 ↗
2. Uskoković V (2021) A historical review of glassy carbon: synthesis, structure, properties and applications. Carbon Trends 5:100116–100153. https://doi.org/10.1016/j.cartre.2021.10011610.1016/j.cartre.2021.100116 ↗
3. Sharma S (2018) Glassy carbon: a promising material for micro and nanomanufacturing. Materials (Basel) 11:1–2. https://doi.org/10.3390/ma1110185710.3390/ma11101857 ↗
4. Kenner GH, Brown SD, Pasco WD, Marshall AE, Lovell JE (1975) Biocompatibility and static fatigue behavior of glassy carbon. J Biomed Mater Res 9:111–12010.1002/jbm.820090111 ↗
5. Lauslahti K, Pätiälä H, Rokkanen P, Tarvainen T, Rautavuori J, Törmälä P (1983) Interaction of microporous glassy carbon and living tissue. Ann Biomed Eng 11:495–498. https://doi.org/10.1007/BF0258422110.1007/BF02584221 ↗
6. Katsumoto K, Niibori T, Takamatsu T, Kaibara M (1986) Development of glassy carbon electrode (dead sea scroll) for low energy cardiac pacing. Pacing Clin Electrophysiol 9:1220–1224. https://doi.org/10.1111/j.1540-8159.1986.tb06698.x10.1111/j.1540-8159.1986.tb06698.x ↗
7. Tarvainen UT, Tunturi TO, Paronen I, Lauslahti KR, Lehtinen ET, Rokkaneny U, Rautavuori J, Tormala P, Patiala HV (1995) Department, glassy carbon implant as a bone graft substitute: an experimental study on rabbits. Clin Mater 17:93–98. https://doi.org/10.1016/0267-6605(94)90017-510.1016/0267-6605(94)90017-5 ↗
8. Chen Q, Thouas GA, (2021) Biomaterials, In: Materials Science and Engineering, 1st edn. CRC Press, Boca Raton, ch. 7, pp. 562
9. Prakasam M, Locs J, Salma-Ancane K, Loca D, Largeteau A, Berzina-Cimdina L (2015) Fabrication, properties and applications of dense hydroxyapatite: a review. J Funct Biomater 6:1099–1140. https://doi.org/10.3390/jfb604109910.3390/jfb6041099 ↗
10. Liu S et al (2023) Biomimetic natural biomaterials for tissue engineering and regenerative medicine: new biosynthesis methods, recent advances, and emerging applications. Mil Med Res 10:1–3. https://doi.org/10.1186/s40779-023-00448-w10.1186/s40779-023-00448-w ↗
11. Liu Y, Cui X, Huang J, Zhang X (2020) Recent progress in biomimetic surface coatings on titanium implants. J Mater Chem B 8:6612–6626
12. Lee SH, Yoo S, Kim SH, Kim YM, Han SI, Lee H (2025) Nature-inspired surface modification strategies for implantable devices. Mater Today Bio 31:1–13. https://doi.org/10.1016/j.mtbio.2025.10161510.1016/j.mtbio.2025.101615 ↗
13. Ngouoko JJK et al (2022) Hydroxyapatite/L-Lysine composite coating as glassy carbon electrode modifier for the analysis and detection of Nile blue A. Materials 15:1–3. https://doi.org/10.3390/ma1512426210.3390/ma15124262 ↗
14. Vladislavić N, Rončević IŠ, Buzuk M, Buljac M, Drventić I (2021) Electrochemical/chemical synthesis of hydroxyapatite on glassy carbon electrode for electroanalytical determination of cysteine. J Solid State Electrochem 25:841–857. https://doi.org/10.1007/s10008-020-04856-z10.1007/s10008-020-04856-z ↗
15. Dockrat U, Ntsoane TP, Malherbe JB, Bam LC, Thabethe TT (2025) Investigating biomimetic coatings on Ti-6Al-4V substrates. J Alloys Compd Commun 7:82–108. https://doi.org/10.1016/j.jacomc.2025.10008210.1016/j.jacomc.2025.100082 ↗
16. Cvelbar U, Pejovnik S, Mozetiè M, Zalar A Increased surface roughness by oxygen plasma treatment of graphite/polymer composite. Micromachines 12:260–276. https://doi.org/10.3390/mi1212144710.3390/mi12121447 ↗
17. de la Rosa JE et al (2025) Enhancing corrosion resistance and bioactive behavior of porous metallic scaffolds through electrochemical coatings. Appl Surf Sci Adv 26:100723–100782. https://doi.org/10.1016/j.apsadv.2025.10072310.1016/j.apsadv.2025.100723 ↗
18. Zhang Z, Lu W, Feng W, Du X, Zuo D (2021) Effect of substrate surface texture on adhesion performance of diamond coating. Int J Refract Met Hard Mater 95:1–4. https://doi.org/10.1016/j.ijrmhm.2020.10540210.1016/j.ijrmhm.2020.105402 ↗
19. Williams DF (2008) On the mechanisms of biocompatibility. Biomaterials 29:2941–2953. https://doi.org/10.1016/j.biomaterials.2008.04.02310.1016/j.biomaterials.2008.04.023 ↗
20. Zhang W, Liao SS, Cui FZ (2019) Hierarchical self-assembly of nano-fibrils in mineralized collagen. Compos Sci Technol 65:2337–2343. https://doi.org/10.1021/cm030080g10.1021/cm030080g ↗
21. Pisarek M, Roguska A, Marcon L, Andrzejczuk M (2012) Biomimetic and electrodeposited calcium-phosphates coatings on Ti - formation, surface characterization, biological response. Biomed Eng—Tech Appl Med. https://doi.org/10.5772/4869310.5772/48693 ↗
22. Gnanasekaran R et al (2024) Extraction and characterization of biocompatible hydroxyapatite (Hap) from red big eye fish bone: potential for biomedical applications and reducing biowastes. Sustain Chem Environ 7:142–161. https://doi.org/10.1016/j.scenv.2024.10014210.1016/j.scenv.2024.100142 ↗
23. Landi E, Tampieri A, Celotti G, Sprio S (2000) Densification behaviour and mechanisms of synthetic hydroxyapatites. J Eur Ceram Soc 20:2377–2387. https://doi.org/10.1016/S0955-2219(00)00154-010.1016/S0955-2219(00)00154-0 ↗
24. Reilly DT, Burstein AH (1975) The elastic and ultimate properties of compact bone tissue. J Biomech 8:393–405. https://doi.org/10.1016/0021-9290(75)90075-510.1016/0021-9290(75)90075-5 ↗
25. Ma C, Du T, Niu X, Fan Y (2022) Biomechanics and mechanobiology of the bone matrix. Bone Res 10:1–14. https://doi.org/10.1038/s41413-022-00223-y10.1038/s41413-022-00223-y ↗
26. Odin G, Savoldelli C, Bouchard PO, Tillier Y (2010) Determination of young’s modulus of mandibular bone using inverse analysis. Med Eng Phys 32(6):630–637. https://doi.org/10.1016/j.medengphy.2010.03. (009ï)10.1016/j.medengphy.2010.03 ↗
27. Ramli MI, MohdFoudzi F, Sulong AB, Abdul Yazid FA, Muhamad N, Hui D (2020) Characterization of titanium alloy-hydroxyapatite composite through powder injection molding. Jurnal Kejuruteraan 32:735–742. https://doi.org/10.17576/jkukm-2020-32(4)-2510.17576/jkukm-2020-32(4)-25 ↗
28. Arifin YH, Yusuf Y (2013) Mycelium fibers as new resource for environmental sustainability. Procedia Eng. https://doi.org/10.1016/j.proeng.2013.02.06510.1016/j.proeng.2013.02.065 ↗
29. Gerhardt LC, Boccaccini AR (2010) Bioactive glass and glass-ceramic scaffolds for bone tissue engineering. Mater Basel 3:3867–3910. https://doi.org/10.3390/ma307386710.3390/ma3073867 ↗
30. Butt HJ, Cappella B, Kappl M (2005) Force measurements with the atomic force microscope: technique, interpretation and applications. Surf Sci Rep 59:1–152. https://doi.org/10.1016/j.surfrep.2005.08.00310.1016/j.surfrep.2005.08.003 ↗
31. Lai T, Chen Y, Sun J, Guo M (2021) Material-related contact time dependence of adhesion force revealed by an AFM cantilever in a humid environment. Appl Surf Sci 550:1–10. https://doi.org/10.1016/j.apsusc.2021.14935710.1016/j.apsusc.2021.149357 ↗
32. Martinez H, Vázquez-Vélez E, Galván-Hernández A, Radilla-Bello J, Xosocotla O, Meza AE (2023) Atmospheric plasma treatment to improve the surface properties of P3HB coating. A study of the influence of substrate roughness. J Appl Polym Sci 140:449–469. https://doi.org/10.1002/app.5444910.1002/app.54449 ↗
33. Noh H, Vogler EA (2007) Volumetric interpretation of protein adsorption: competition from mixtures and the Vroman effect. Biomaterials 28:405–422. https://doi.org/10.1016/j.biomaterials.2006.09.00610.1016/j.biomaterials.2006.09.006 ↗
34. Kokubo T, Kim H, Kawashita M (2003) Novel bioactive materials with different mechanical properties. Biomaterials 24:2161–2175. https://doi.org/10.1016/S0142-9612(03)00044-910.1016/S0142-9612(03)00044-9 ↗
35. Topic M, Nstoane TP, Heimann RB (2006) Microstructural characterization and stress determination in as-plasma sprayed and incubated bioconductive hydroxyapatite coatings. Surf Coat Technol 201:3633–3641. https://doi.org/10.1016/j.surfcoat.2006.08.13910.1016/j.surfcoat.2006.08.139 ↗
36. Radin SR, Ducheyne P, King L (1993) The effect of calcium phosphate ceramic composition and structure on in vitro behavior. II. Precipitation. J Biomed Mater Res 27:35–45. https://doi.org/10.1002/jbm.82027010610.1002/jbm.820270106 ↗
37. Cao Y, Weng J, Chen J, Feng J, Yang Z, Zhang X (1996) Water vapour-treated hydroxyapatite coatings after plasma spraying and their characteristics. Biomaterials 17:419–424. https://doi.org/10.1016/0142-9612(96)89658-X10.1016/0142-9612(96)89658-X ↗
38. Oyane A, Kim H, Furuya T, Kokubo T, Miyazaki T, Nakamura T (2003) Preparation and assessment of revised simulated body fluids. J Biomed Mater Res A 65A:188–195. https://doi.org/10.1002/jbm.a.1048210.1002/jbm.a.10482 ↗