Research progress on wear resistance of high-entropy alloys and high-entropy alloy composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Wei R, Jia J, Guo D, Deng R, Jiao X, Yang J, Shi Y, Zhang Z (2026) Synergistic lubrication mechanisms and performance regulation of wide-temperature-range wear-resistant and self-lubricating composites: a review of advanced preparation techniques. J Mater Res Technol 40:1600–1630. https://doi.org/10.1016/j.jmrt.2025.12.23110.1016/j.jmrt.2025.12.231 ↗
2. Toor Z, Wu R, Hashmi M, Lee J, Li X, Yuji H, Zhang H, Kim H (2026) Computation- and process-based design for advanced structural high-entropy alloy development and analyses: a critical review. Prog Mater Sci 155:101534. https://doi.org/10.1016/j.pmatsci.2025.10153410.1016/j.pmatsci.2025.101534 ↗
3. Kummr D (2023) Recent advances in tribology of high entropy alloys: a critical review. Prog Mater Sci 136:101106. https://doi.org/10.1016/j.pmatsci.2023.10110610.1016/j.pmatsci.2023.101106 ↗
4. Deng R, Wei R, Zhao C, Liang J, Bai Q, Wu X, Zhang Y (2025) High-temperature lubrication mechanisms of laser cladding austenitic stainless steel coatings: XPS and DFT calculations. Vacuum 238:114302. https://doi.org/10.1016/j.vacuum.2025.11430210.1016/j.vacuum.2025.114302 ↗
5. Pei W, Pei X, Xie Z, Wang J (2024) Research progress of marine anti-corrosion and wear-resistant coating. Tribol Int 198:109864. https://doi.org/10.1016/j.triboint.2024.10986410.1016/j.triboint.2024.109864 ↗
6. Yeh J, Chen S, Lin S, Gan J, Chin T, Shun T, Tsau C, Chang S (2004) Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Adv Eng Mater 6:5. https://doi.org/10.1002/adem.20030056710.1002/adem.200300567 ↗
7. Hsu W, Tsai C, Yeh A, Yeh J (2025) Development of high-entropy materials: a review of milestones over the last 20 years. Adv Eng Mater 27:2500884. https://doi.org/10.1002/adem.20250088410.1002/adem.202500884 ↗
8. Oses C, Toher C, Curtarolo S (2020) High-entropy ceramics. Nat Rev Mater 5:295–309. https://doi.org/10.1038/s41578-019-0170-810.1038/s41578-019-0170-8 ↗
9. Deluigi O, Pasianot R, Valencia F, Caro A, Farkas D, Bringa E (2021) Simulations of primary damage in a high entropy alloy: probing enhanced radiation resistance. Acta Mater 213:116951. https://doi.org/10.1016/j.actamat.2021.11695110.1016/j.actamat.2021.116951 ↗
10. Guo Y, Su H, Zhou H, Shen Z, Liu Y, Zhang J, Liu L, Fu H (2022) Unique strength-ductility balance of AlCoCrFeNi2.1 eutectic high entropy alloy with ultra-fine duplex microstructure prepared by selective laser melting. J Mater Sci Technol 111:298–306. https://doi.org/10.1016/j.jmst.2021.10.01310.1016/j.jmst.2021.10.013 ↗
11. Wang M, Lu Y, Lan J, Wang T, Zhang C, Gao Z, Li T, Liaw P (2023) Lightweight, ultrastrong and high thermal-stable eutectic high-entropy alloys for elevated-temperature applications. Acta Mater 248:118806. https://doi.org/10.1016/j.actamat.2023.11880610.1016/j.actamat.2023.118806 ↗
12. Fu Y, Li J, Luo H, Du C, Li X (2021) Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys. J Mater Sci Technol 80:217–233. https://doi.org/10.1016/j.jmst.2020.11.04410.1016/j.jmst.2020.11.044 ↗
13. Li Y, Shi Y (2021) Microhardness, wear resistance, and corrosion resistance of AlxCrFeCoNiCu high-entropy alloy coatings on aluminum by laser cladding. Opt Laser Technol 134:106632. https://doi.org/10.1016/j.optlastec.2020.10663210.1016/j.optlastec.2020.106632 ↗
14. Zhang Z, Hua K, Cao Y, Song Y, Li X, Zhou Q, Wang H (2024) Microstructures and properties of FeCrAlMoSix high entropy alloy coatings prepared by laser cladding on a titanium alloy substrate. Surf Coat Tech 478:130437. https://doi.org/10.1016/j.surfcoat.2024.13043710.1016/j.surfcoat.2024.130437 ↗
15. Jin G, Cai Z, Guan Y, Cui X, Liu Z, Li Y, Dong M, Zhang D (2018) High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating. Appl Surf Sci 445:113–122. https://doi.org/10.1016/j.apsusc.2018.03.13510.1016/j.apsusc.2018.03.135 ↗
16. Meng Y, Xu J, Jin Z, Prakash B, Hu Y (2020) A review of recent advances in tribology. Friction 8:221–300. https://doi.org/10.1007/s40544-020-0367-210.1007/s40544-020-0367-2 ↗
17. Lv Q, He W, Lu Z (2025) Physical models of sliding friction: a review. Friction 13:9441132. https://doi.org/10.26599/FRICT.2025.944113210.26599/FRICT.2025.9441132 ↗
18. Hui S, Zhou X, Zhang L, Wu H (2024) Constructing multiphase-induced interfacial polarization to surpass defect-induced polarization in multielement sulfide absorbers. Adv Sci 11:2307649. https://doi.org/10.1002/advs.2023076410.1002/advs.20230764 ↗
19. Duan L, Zhang Y, Tang H, Liao J, Zhou G, Zhou X (2025) Recent advances in high-entropy layered oxide cathode materials for alkali metal-ion batteries. Adv Mater 37:2411426. https://doi.org/10.1002/adma.20241142610.1002/adma.202411426 ↗
20. Zhang H, Li J, Dong C, Zhu C, Xu J, Zuo L, Sun J (2024) Rational design and dynamic reconstruction of phosphorus-doped amorphous high-entropy oxysulfide for efficient overall alkaline water splitting. Chem Eng J 499:156580. https://doi.org/10.1016/j.cej.2024.15658010.1016/j.cej.2024.156580 ↗
21. Hsu W, Tsai C, Yeh A, Yeh J (2024) Clarifying the four core effects of high-entropy materials. Nat Rev Chem 8:471–485. https://doi.org/10.1038/s41570-024-00602-510.1038/s41570-024-00602-5 ↗
22. Dong Y, Zhou Z, Ma Y, Zhang H, Meng F, Wu Y, Ma Y (2024) Layered-structured sodium-ion cathode materials: advancements through high entropy approaches. ACS Energy Lett 9:5096–5119. https://doi.org/10.1021/acsenergylett.4c0222310.1021/acsenergylett.4c02223 ↗
23. Chang X, Zeng M, Liu K, Fu L (2020) Phase engineering of high-entropy alloys. Adv Mater 32:1907226. https://doi.org/10.1002/adma.20190722610.1002/adma.201907226 ↗
24. Chen R, Qin G, Zheng H, Wang L, Su Y, Chiu Y, Ding H, Guo J, Fu H (2018) Composition design of high entropy alloys using the valence electron concentration to balance strength and ductility. Acta Mater 144:129–137. https://doi.org/10.1016/j.actamat.2017.10.05810.1016/j.actamat.2017.10.058 ↗
25. Guo S, Hu Q, Ng C, Liu C (2013) More than entropy in high-entropy alloys: forming solid solutions or amorphous phase. Intermetallics 41:96–103. https://doi.org/10.1016/j.intermet.2013.05.00210.1016/j.intermet.2013.05.002 ↗
26. He J, Liu W, Wang H, Wu Y, Liu X, Nieh T, Lu Z (2014) Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system. Acta Mater 62:105–113. https://doi.org/10.1016/j.actamat.2013.09.03710.1016/j.actamat.2013.09.037 ↗
27. Dippo O, Vecchio K (2021) A universal configurational entropy metric for high-entropy materials. Scripta Mater 201:113974. https://doi.org/10.1016/j.scriptamat.2021.11397410.1016/j.scriptamat.2021.113974 ↗
28. Gao P, Gao L, Ma Z, Jiang M, Cao M (2025) A perspective on high-entropy oxides as potential electromagnetic wave absorbers. Adv Mater 37:e1009. https://doi.org/10.1002/adma.20251000910.1002/adma.202510009 ↗
29. Takeuchi A, Amiya K, Wada T, Yubuta K, Zhang W (2014) High-entropy alloys with a hexagonal close-packed structure designed by equi-atomic alloy strategy and binary phase diagrams. JOM 66:10. https://doi.org/10.1007/s11837-014-1085-x10.1007/s11837-014-1085-x ↗
30. Yang X, Zhang Y (2012) Prediction of high-entropy stabilized solid-solution in multi-component alloys. Mater Chem Phys 132:233–238. https://doi.org/10.1016/j.matchemphys.2011.11.02110.1016/j.matchemphys.2011.11.021 ↗
31. Zhang Y, Zhou Y, Lin J, Chen G, Liaw P (2008) Solid-solution phase formation rules for multi-component alloys. Adv Eng Mater 10:6. https://doi.org/10.1002/adem.20070024010.1002/adem.200700240 ↗
32. Guo S, Ng C, Lu J, Liu C (2011) Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys. J Appl Phys 109:103505. https://doi.org/10.1063/1.358722810.1063/1.3587228 ↗
33. Wu H, Zhang S, Wang Z, Zhang C, Chen H, Chen J (2022) New studies on wear and corrosion behavior of laser cladding FeNiCoCrMox high entropy alloy coating: the role of Mo. Int J Refract Met H 102:105721. https://doi.org/10.1016/j.ijrmhm.2021.10572110.1016/j.ijrmhm.2021.105721 ↗
34. Xing X, Liu Y, Hu J, Li W (2022) Effect of Al content on microstructure and wear properties of FeCrNiMnAlx high-entropy alloys. Mater Res Express 9:036510. https://doi.org/10.1088/2053-1591/ac5a9c10.1088/2053-1591/ac5a9c ↗
35. Jia H, Li X, Dong Z, Jia L, Luo H (2025) Microstructure, wear and corrosion properties of laser melted CoCrNiFeTix high-entropy alloy coatings on copper alloys. J Alloy Compd 1021:17964. https://doi.org/10.1016/j.jallcom.2025.17967410.1016/j.jallcom.2025.179674 ↗
36. Cantor B (2021) Multicomponent high-entropy Cantor alloys. Prog Mater Sci 120:100754. https://doi.org/10.1016/j.pmatsci.2020.10075410.1016/j.pmatsci.2020.100754 ↗
37. Xie H, Tong Y, Bai Y, Li X, Han Y, Hua K, Wang H (2023) Wear-resistance of high-entropy alloy coatings and high-entropy alloy-based composite coatings prepared by the laser cladding technology: a review. Adv Eng Mater 25:2300426. https://doi.org/10.1002/adem.20230042610.1002/adem.202300426 ↗
38. Joseph J, Haghdadi N, Annasamy M, Kada S, Hodgson P, Barnett M, Fabijanic D (2020) On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature. Scripta Mater 186:230–235. https://doi.org/10.1016/j.scriptamat.2020.05.05310.1016/j.scriptamat.2020.05.053 ↗
39. Fana N, Chen T, Ju J, Rafferty A, Lupoi R, Kong N, Xie Y, Yin S (2024) Solid-state deposition of Mo-doped CoCrFeNi high-entropy alloy with excellent wear resistance via cold spray. J Mater Res Technol 30:8382–8395. https://doi.org/10.1016/j.jmrt.2024.05.09910.1016/j.jmrt.2024.05.099 ↗
40. Zhu Z, Liu X, Liu Y, Zhang S, Meng Y, Zhou H, Zhang S (2023) Effects of Cu/Si on the microstructure and tribological properties of FeCoCrNi high entropy alloy coating by laser cladding. Wear 512–513:204533. https://doi.org/10.1016/j.wear.2022.20453310.1016/j.wear.2022.204533 ↗
41. Babu P, Dongre P, Moganraj A, Manivasagam G, Schwandt C, Sure J (2025) Wear behavior of CoCrFeNi high-entropy alloy prepared by mechanical alloying. J Alloys Compd 1010:177115. https://doi.org/10.1016/j.jallcom.2024.17711510.1016/j.jallcom.2024.177115 ↗
42. Zhang Z, Ling Y, Hui J, Yang F, Zhang X, Tan S, Xie Z, Feng F (2023) Effect of C additions to the microstructure and wear behaviour of CoCrFeNi high-entropy alloy. Wear 530–531:205032. https://doi.org/10.1016/j.wear.2023.20503210.1016/j.wear.2023.205032 ↗
43. Geng Y, Chen J, Tan H, Cheng J, Yang J, Liu W (2020) Vacuum tribological behaviors of CoCrFeNi high entropy alloy at elevated temperatures. Wear 456–457:203368. https://doi.org/10.1016/j.wear.2020.20336810.1016/j.wear.2020.203368 ↗
44. Liu H, Gao W, Liu J, Du X, Li X, Yang H (2020) Microstructure and properties of CoCrFeNiTi high-entropy alloy coating fabricated by laser cladding. JMEPEG 29:7170–7178. https://doi.org/10.1007/s11665-020-05204-y10.1007/s11665-020-05204-y ↗
45. Shun T, Chang L, Shiu M (2012) Microstructure and mechanical properties of multiprincipal component CoCrFeNiMox alloys. Mater Charact 70:63–67. https://doi.org/10.1016/j.matchar.2012.05.00510.1016/j.matchar.2012.05.005 ↗
46. Shuai C, Xie J, Jiang X, Peng S, Wang C (2024) Additively manufactured high entropy alloy with high wear resistance for biomedical implant. Vacuum 221:112939. https://doi.org/10.1016/j.vacuum.2023.11293910.1016/j.vacuum.2023.112939 ↗
47. Ren Y, Jia Q, Du Y, Zhou Q, Greiner C, Hua K, Wang H, Wang J (2022) A wear-resistant metastable CoCrNiCu high-entropy alloy with modulated surface and subsurface structures. Friction 10:1722–1738. https://doi.org/10.1007/s40544-022-0606-910.1007/s40544-022-0606-9 ↗
48. Senkov O, Wilks G, Miracle D, Chuang C, Liaw P (2010) Refractory high-entropy alloys. Intermetallics 18:1758–1765. https://doi.org/10.1016/j.intermet.2010.05.01410.1016/j.intermet.2010.05.014 ↗
49. Xiao J, Xu G, Chen J, Rusinov P, Zhang C (2024) Tribocorrosion behavior of TiZrHfNb-based refractory high-entropy alloys. Wear 536–537:205158. https://doi.org/10.1016/j.wear.2023.20515810.1016/j.wear.2023.205158 ↗
50. Zhou M, Pan K, Zhou X, Ye S, Du S, Wu H (2025) Surface wear behavior of nanograined NbMoTaW refractory high-entropy alloys via nano-scratching simulations. Acta Metall Sin 38:946–960. https://doi.org/10.1007/s40195-025-01832-210.1007/s40195-025-01832-2 ↗
51. Senkov O, Scott J, Senkova S, Miracle D, Woodward C (2011) Microstructure and room temperature properties of a high-entropy TaNbHfZrTi alloy. J Alloys Compd 509:6043–6048. https://doi.org/10.1016/j.jallcom.2011.02.17110.1016/j.jallcom.2011.02.171 ↗
52. Senkov O, Senkova S, Woodward C (2014) Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys. Acta Mater 68:214–228. https://doi.org/10.1016/j.actamat.2014.01.02910.1016/j.actamat.2014.01.029 ↗
53. Lai L, Yu W, Zhang C, Zhang H, Tian H, Du Y, Chen L (2025) The influence of aluminum content on the microstructure and mechanical properties of TiZrHfNbAlx refractory high entropy alloys. Int J Refract Met Hard Mater 133:107379. https://doi.org/10.1016/j.ijrmhm.2025.10737910.1016/j.ijrmhm.2025.107379 ↗
54. Xing W, Li X, Yu Z, Liu C, Wang S, Zhao H (2025) Deformation and material removal mechanisms during precision cutting of duplex heterogeneous high-entropy alloys revealed by in-situ SEM scratch testing. J Manuf Process 155:981–995. https://doi.org/10.1016/j.jmapro.2025.10.06310.1016/j.jmapro.2025.10.063 ↗
55. Chen C, Bai Q, Li Q, Zhao C, Zhang J, Zhang S (2025) Study on the performance of Fe-based alloy coating on 40Cr substrate surface. J Mater Eng Perform 34:1586–1595. https://doi.org/10.1007/s11665-024-09157-410.1007/s11665-024-09157-4 ↗
56. Zhang G, Liu H, Tian X, Chen P, Yang H, Hao J (2020) Microstructure and properties of AlCoCrFeNiSi high-entropy alloy coating on AISI 304 stainless steel by laser cladding. JMEPEG 29:278–288. https://doi.org/10.1007/s11665-020-04586-310.1007/s11665-020-04586-3 ↗
57. Liu L, Zhang Y, Han J, Wang X, Jiang W, Liu C, Zhang Z, Liaw P (2021) Nanoprecipitate-strengthened high-entropy alloys. Adv Sci 8:2100870. https://doi.org/10.1002/advs.20210087010.1002/advs.202100870 ↗
58. Qu T, Liu M, Yang C, Wang X, Wang J (2025) The growth kinetic and ultra high hardness of CoCrFeNiTi high-entropy alloy by mechanical alloying and spark plasma sintering. Materials 18:3242. https://doi.org/10.3390/ma1814324210.3390/ma18143242 ↗
59. Verma A, Tarate P, Abhyankar A, Mohape M, Gowtam D, Deshmukh V, Shanmugasundaram T (2019) High temperature wear in CoCrFeNiCux high entropy alloys: the role of Cu. Scripta Mater 161:28–31. https://doi.org/10.1016/j.scriptamat.2018.10.00710.1016/j.scriptamat.2018.10.007 ↗
60. Xu Y, Li Z, Liu J, Chen Y, Zhang F, Wu L, Hao J, Liu L (2020) Microstructure evolution and properties of laser cladding CoCrFeNiTiAlx high-entropy alloy coatings. Coatings 10:373. https://doi.org/10.3390/coatings1004037310.3390/coatings10040373 ↗
61. Wu J, Lin S, Yeh J, Chen S, Huang Y, Chen H (2006) Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content. Wear 261:513–519. https://doi.org/10.1016/j.wear.2005.12.00810.1016/j.wear.2005.12.008 ↗
62. He Z, Zhang H, Cheng H, Ge M, Si T, Che L, Zheng K, Zeng L, Wang Q (2024) Machine learning guided BCC or FCC phase prediction in high entropy alloys. J Mater Res Technol 29:3477–3486. https://doi.org/10.1016/j.jmrt.2024.01.25710.1016/j.jmrt.2024.01.257 ↗
63. Ray K, Roy U, Ray A, Kumari M, Nath A (2021) Underlying mechanisms for deformation and fracture behaviour of some BCC and FCC high entropy alloys. Theor Appl Fract Mec 113:102948. https://doi.org/10.1016/j.tafmec.2021.10294810.1016/j.tafmec.2021.102948 ↗
64. Chintha A, Valtonen K, Kuokkala V, Kundu S, Peet M, Bhadeshi H (2019) Role of fracture toughness in impact-abrasion wear. Wear 428–429:430–437. https://doi.org/10.1016/j.wear.2019.03.02810.1016/j.wear.2019.03.028 ↗
65. Wei Z, Wang W, Liu M, Tian J, Xu G (2023) Comparison of wear performance of bainitic and martensitic structure with similar fracture toughness and hardness at different wear conditions. Wear 512–513:204512. https://doi.org/10.1016/j.wear.2022.20451210.1016/j.wear.2022.204512 ↗
66. Wei M, Li J, Xie K, Xiao Y, Wan Q, Yang Z, Huang Y, Refai M (2024) Effect of WC content on hardness and fracture toughness of WC-Ni60A wear-resistant coatings. Surf Coat Tech 491:131133. https://doi.org/10.1016/j.surfcoat.2024.13113310.1016/j.surfcoat.2024.131133 ↗
67. Buyakov A, Lukyanets M, Fotin I, Shmakov V, Burlachenko A, Rudmin M, Buyakov S (2025) Fracture toughness and abrasive wear of (ZrTi)B2–SiC ceramic composites with low-modulus hexagonal boron nitride inclusions. Ceram Int 51:26401–26410. https://doi.org/10.1016/j.ceramint.2025.03.32110.1016/j.ceramint.2025.03.321 ↗
68. Shi P, Yu Y, Xiong N, Liu M, Qiao Z, Yi G, Yao Q, Zhao G, Xie E, Wang Q (2020) Microstructure and tribological behavior of a novel atmospheric plasma sprayed AlCoCrFeNi high entropy alloy matrix self-lubricating composite coatings. Tribol Int 151:106470. https://doi.org/10.1016/j.triboint.2020.10647010.1016/j.triboint.2020.106470 ↗
69. Sun H, Xin B, Chen J, Shi P, Yi G, Wan S, Meng J, Wang W, Shan Y (2024) Effect of the high temperature phase transition on the tribological behavior of atmospheric plasma sprayed AlCoCrFeNi–Bi2O3 coating. Surf Coat Technol 476:130286. https://doi.org/10.1016/j.surfcoat.2023.13028610.1016/j.surfcoat.2023.130286 ↗
70. Löbel M, Lindner T, Clauß S, Pippig R, Dietrich D, Lampke T (2021) Microstructure and wear behavior of the high-velocity oxygen-fuel sprayed and spark plasma sintered high-entropy alloy AlCrFeCoNi. Adv Eng Mater 23:2001253. https://doi.org/10.1002/adem.20200125310.1002/adem.202001253 ↗
71. Wen Y, Sun H, Yi G, Wan S, Liu C, Wang W, Shan Y, Wang J (2025) Influence of heat treatment temperature on the BCC/FCC phase transformation and tribological properties of atmospheric plasma-sprayed AlCoCrFeNi coatings. Mater Today Commun 49:113740. https://doi.org/10.1016/j.mtcomm.2025.11374010.1016/j.mtcomm.2025.113740 ↗
72. Sun Y, Wang Z, Wang W, Zhao X, Zhu K, Li H, Zhao Y, Yin Z (2023) Wear and corrosion resistance of Al1.2CoCrFeNiScx high entropy alloys with scandium addition. J Mater Res Technol 27:8023–8036. https://doi.org/10.1016/j.jmrt.2023.11.23710.1016/j.jmrt.2023.11.237 ↗
73. Guan Y, Cui X, Chen D, Su W, Zhao Y, Li J, Feng L, Li X, Jin G (2023) Realizing excellent tribological properties of BCC/FCC gradient high-entropy alloy coating via an in-situ interface reaction. Mater Today Commun 35:106098. https://doi.org/10.1016/j.mtcomm.2023.10609810.1016/j.mtcomm.2023.106098 ↗
74. Meghwal A, Singh S, Sridar S, Xiong W, Hall C, Munroe P, Berndt C, Ang A (2023) Development of composite high entropy-medium entropy alloy coating. Scripta Mater 222:115044. https://doi.org/10.1016/j.scriptamat.2022.11504410.1016/j.scriptamat.2022.115044 ↗
75. Li X, Feng Y, Wang X, Xie H, Yang X, Liu B, Cao Y (2022) Microstructures and properties of AlCrFeNiMnx high-entropy alloy coatings fabricated by laser cladding on a copper substrate. J Alloys Compd 926:166778. https://doi.org/10.1016/j.jallcom.2022.16677810.1016/j.jallcom.2022.166778 ↗
76. Sasi R, Gallo S, Attar H, Taherishargh M, Barnett M, Fabijianic D (2024) The effect of phase constituents on the low and high stress abrasive wear behaviour of high entropy alloys. Wear 556–557:205531. https://doi.org/10.1016/j.wear.2024.20553110.1016/j.wear.2024.205531 ↗
77. Deng R, Wei R, Zhang Y, Zhao C, Liang J, Bai Q, Li H, Ouyang C, He Q, Liu S, Kang X, Wu X (2025) Investigation of variable-temperature wear characteristics of austenitic stainless steel coatings fabricated via laser energy deposition. Wear 572–573:205993. https://doi.org/10.1016/j.wear.2025.20599310.1016/j.wear.2025.205993 ↗
78. Luo J, Sun W, Duan R, Yang W, Chan K, Ren F, Yang X (2022) Laser surface treatment-introduced gradient nanostructured TiZrHfTaNb refractory high-entropy alloy with significantly enhanced wear resistance. J Mater Sci Technol 110:43–56. https://doi.org/10.1016/j.jmst.2021.09.02910.1016/j.jmst.2021.09.029 ↗
79. Yang W, Luo J, Fu H, Cheung C, Ruan H, Yang X (2022) bcc → hcp phase transition significantly enhancing the wear resistance of metastable refractory high-entropy alloy. Scripta Mater 221:114966. https://doi.org/10.1016/j.scriptamat.2022.11496610.1016/j.scriptamat.2022.114966 ↗
80. Wang T, Wang C, Li J, Chai L, Deng C, Luo J, Huang Y (2022) Microstructure and properties of laser-clad high entropy alloy coating on Inconel 718 alloy. Mater Charact 193:112314. https://doi.org/10.1016/j.matchar.2022.11231410.1016/j.matchar.2022.112314 ↗
81. Wang Y, Li X, Liang A (2022) Wear behavior and microstructural transformation of single FCC phase AlCoCrFeNi high-entropy alloy at elevated temperatures. Int J Mater Res 113:730–743. https://doi.org/10.1515/ijmr-2021-863310.1515/ijmr-2021-8633 ↗
82. Deng R, Wei R, Liang J, Zhao C, Bai Q, Li H, Ouyang C, Wu X, Zhang Y (2024) Microstructure and wear characteristics of austenitic stainless steel coatings fabricated through various directed energy deposition. MASM 3:4974. https://doi.org/10.36922/msam.497410.36922/msam.4974 ↗
83. Falodun O, Oke S, Akinwamide S, Ajibola O, Adebayo A, Borisade S, Adediran A, Olubambi P (2023) The effect of TiN–TiB2 on the microstructure, wear, and nanoindentation behavior of Ti6Al4V–Ni–Cr matrix composites. JMEPEG 32:5566–5575. https://doi.org/10.1007/s11665-022-07504-x10.1007/s11665-022-07504-x ↗
84. Ding H, Cao Y, Hua K, Tong Y, Li N, Sun L, Li X, Wu H, Wang H (2023) Fretting wear resistance at ambient and elevated temperatures of 316 stainless steel improved by laser cladding with Co-based alloy/WC/CaF2 composite coating. Opt Laser Technol 163:109428. https://doi.org/10.1016/j.optlastec.2023.10942810.1016/j.optlastec.2023.109428 ↗
85. Zhang M, Wang D, He L, Ye X, Ouyang W, Xu Z, Zhang W, Zhou X (2022) Microstructure and elevated temperature wear behavior of laser-cladded AlCrFeMnNi high-entropy alloy coating. Opt Laser Technol 149:107845. https://doi.org/10.1016/j.optlastec.2022.10784510.1016/j.optlastec.2022.107845 ↗
86. Zhang G, Liu T, Yin Q, Wang W, Song X, Huang W, Zhang H (2022) Effect of B–Si ratio and laser remelting on the microstructure and properties of Fe10Co10Ni10Cr4Mo6BxSi10-x coating by laser cladding. Surf Coat Tech 450:128989. https://doi.org/10.1016/j.surfcoat.2022.12898910.1016/j.surfcoat.2022.128989 ↗
87. Shang X, Liu Q, Guo Y, Ding K, Liao T, Wang F (2022) Nano-TiC reinforced [Cr–Fe4Co4Ni4]Cr3 high entropy-alloy composite coating fabricated by laser cladding. J Mater Res Technol 21:2076–2088. https://doi.org/10.1016/j.jmrt.2022.10.04810.1016/j.jmrt.2022.10.048 ↗
88. Cai Y, Zhu L, Cui Y, Shan M, Li H, Xin Y, Han J (2021) Fracture and wear mechanisms of FeMnCrNiCo + x(TiC) composite high-entropy alloy cladding layers. Appl Surf Sci 543:148794. https://doi.org/10.1016/j.apsusc.2020.14879410.1016/j.apsusc.2020.148794 ↗
89. Zhang Y, Lv D, Tian L, Chen K (2025) Effect of WC particle addition on the wear resistance of FeCoNiAlTi coatings. JMEPEG 34:18367–18377. https://doi.org/10.1007/s11665-024-10538-y10.1007/s11665-024-10538-y ↗
90. Da Q, Kang J, Ma G, Zhou Y, Fu Z, Zhu L, She D, Wang H (2024) Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF. Tribol Int 200:110149. https://doi.org/10.1016/j.triboint.2024.11014910.1016/j.triboint.2024.110149 ↗
91. Zhang Z, Li H, Si C, Xu S, Wang J (2025) Microstructure and wear behavior of (CoCrFeNiMn)1−x/(WC)x composite coatings fabricated by directed energy deposition. Wear 578–579:206205. https://doi.org/10.1016/j.wear.2025.20620510.1016/j.wear.2025.206205 ↗
92. Wang F, Jiang Y, Kong D (2025) Laser direct energy deposited xNi60WC-FeCoNiCrMo HEA coatings: structure evolution, tribological behavior and wear mechanism. Mater Today Commun 49:113949. https://doi.org/10.1016/j.mtcomm.2025.11394910.1016/j.mtcomm.2025.113949 ↗
93. Yu D, Wang R, Wu C, Wang Z, Zhao X, Zhang S, Zhang C, Tao X (2024) Wear, corrosion and cavitation erosion behavior of WC-reinforced FeCrNiMnAl ceramic-high entropy alloy composite coatings by laser cladding. Ceram Int 50:55790–55800. https://doi.org/10.1016/j.ceramint.2024.10.45210.1016/j.ceramint.2024.10.452 ↗
94. Xia S, Chen H, Zhou J, Zheng L, Wang W, Zheng Q (2024) Microstructure evolution and wear resistance of a novel ceramic particle-reinforced high-entropy alloy prepared by laser powder bed fusion. Ceram Int 50:5962–5973. https://doi.org/10.1016/j.ceramint.2023.11.16210.1016/j.ceramint.2023.11.162 ↗
95. Liu H, Wang R, Hao J, Liu X, Chen P, Yang H, Zhang T (2024) Microstructural evolution and wear characteristics of laser-clad CoCrFeNiMn high-entropy alloy coatings incorporating tungsten carbide. J Alloys Compd 976:173124. https://doi.org/10.1016/j.jallcom.2023.17312410.1016/j.jallcom.2023.173124 ↗
96. Wang Z, Wang G, Song Z, Liu S, Zhou Y, Qiu X, Wu C, Wang X, Chen Z, Meng C (2024) Microstructure evolution, wear and corrosion behavior of WC reinforced CoCrFeNiMn high-entropy alloy composite coatings by induction cladding. Surf Coat Tech 486:130938. https://doi.org/10.1016/j.surfcoat.2024.13093810.1016/j.surfcoat.2024.130938 ↗
97. Xu P, Zhu L, Xue P, Yang Z, Wang S, Ning J, Meng G, Lan Q, Qin S (2022) Microstructure and properties of IN718/WC-12Co composite coating by laser cladding. Ceram Int 48:9218–9228. https://doi.org/10.1016/j.ceramint.2021.12.10810.1016/j.ceramint.2021.12.108 ↗
98. Li Y, Shi Y, Liang G, Tang S, Wu J, Wang J (2024) Effect of WC on microstructure, molten pool and properties of Ni based coatings by multi-layer laser cladding. Opt Laser Technol 174:110612. https://doi.org/10.1016/j.optlastec.2024.11061210.1016/j.optlastec.2024.110612 ↗
99. Ortiz A, García A, Cadenas M, Fernández M, Cuetos J (2017) WCparticles distribution model in the cross-section of laser cladded NiCrBSi + WC coatings, for different wt% WC. Surf Coat Technol 324:298–306. https://doi.org/10.1016/j.surfcoat.2017.05.08610.1016/j.surfcoat.2017.05.086 ↗
100. Nagarjuna C, Dewangan S, Rao K, Mohan M, Lee H, Song E, Ahn B (2024) Strengthening of mechanical and tribological properties in CrFeCuMnNi high entropy alloy through dispersion of TiO2 reinforcement via powder metallurgy processes. Ceram Int 50:53059–53072. https://doi.org/10.1016/j.ceramint.2024.10.15510.1016/j.ceramint.2024.10.155 ↗