Optimizing β-TCP bone scaffolds: the influence of additive manufacturing, TPMS structures, and pore formers
Source abstract
Abstract
Abstract This study investigates the mechanical properties, biocompatibility, and cytotoxicity of additively manufactured β -TCP bone scaffolds with triply periodic minimal surface (TPMS) based designs. Compression strength testing revealed that the diamond TPMS structure exhibited superior mechanical stability compared to other geometries, despite minor variability. Pore formers introduced controlled porosity, resulting in uniform spherical pores without compromising structural integrity. Biocompatibility assessments demonstrated robust cell proliferation across all scaffolds, comparable to 2D controls, with minimal cytotoxic effects observed over the testing period. The manufacturing process had no adverse impact on scaffold performance, reinforcing the potential of high-resolution diamond TPMS-based β -TCP scaffolds for bone tissue engineering applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Calcium Carbonate Crystallization and Inhibition · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Wong KV, Hernandez A (2012) A review of additive manufacturing. ISRN Mechanical Engineering 2012:1–10. https://doi.org/10.5402/2012/20876010.5402/2012/208760 ↗
2. Oladapo BI, Omigbodun FT, Olawumi MA (2024) Medical additive manufacturing then, now, and will. In: Medical Additive Manufacturing. Elsevier, pp 381–40010.1016/B978-0-323-95383-2.00005-6 ↗
3. Khan SB, Chen S, Sun X (2024) Advancements in polymer nanocomposite manufacturing: revolutionizing medical breakthroughs via additive manufacturing. Polym Bull 81(11):9465–9517. https://doi.org/10.1007/s00289-024-05154-810.1007/s00289-024-05154-8 ↗
4. Kumar SA, Prasad R (2021) Basic principles of additive manufacturing: different additive manufacturing technologies. In: Additive Manufacturing. Elsevier, pp 17–3510.1016/B978-0-12-822056-6.00012-6 ↗
5. Jafferson JM, Chatterjee D (2021) A review on polymeric materials in additive manufacturing. Mater Today Proc 46:1349–1365. https://doi.org/10.1016/j.matpr.2021.02.48510.1016/j.matpr.2021.02.485 ↗
6. Ahlhelm M, Latorre SH, Mayr HO, Storch C, Freytag C, Werner D, Schwarzer-Fischer E, Seidenstücker M (2021) Mechanically stable β-TCP structural hybrid scaffolds for potential bone replacement. J Compos Sci 5(10):281. https://doi.org/10.3390/jcs510028110.3390/jcs5100281 ↗
7. Mobarak MH, Islam MA, Hossain N, Al Mahmud MZ, Rayhan MT, Nishi NJ, Chowdhury MA (2023) Recent advances of additive manufacturing in implant fabrication – a review. Appl Surface Sci Adv 18:100462. https://doi.org/10.1016/j.apsadv.2023.10046210.1016/j.apsadv.2023.100462 ↗
8. Awad A, Goyanes A, Basit AW, Zidan AS, Xu C, Li W, Narayan RJ, Chen RK (2023) A review of state-of-the-art on enabling additive manufacturing processes for precision medicine. J Manuf Sci Eng. https://doi.org/10.1115/1.405619910.1115/1.4056199 ↗
9. Yang F, Ding W, Jia J, Shuai C, Feng P (2026) 4D printing for bone implant: progress, advantages and challenges. Prog Mater Sci 157:101591. https://doi.org/10.1016/j.pmatsci.2025.10159110.1016/j.pmatsci.2025.101591 ↗
10. Gharehdaghi N, Nokhbatolfoghahaei H, Khojasteh A (2024) 4D printing of smart scaffolds for bone regeneration: a systematic review. Biomed Mater. https://doi.org/10.1088/1748-605X/ad8f8010.1088/1748-605X/ad8f80 ↗
11. Sohn H-S, Oh J-K (2019) Review of bone graft and bone substitutes with an emphasis on fracture surgeries. Biomater Res 23:9. https://doi.org/10.1186/s40824-019-0157-y10.1186/s40824-019-0157-y ↗
12. Xie C, Ye J, Liang R, Yao X, Wu X, Koh Y, Wei W, Zhang X, Ouyang H (2021) Advanced strategies of biomimetic tissue-engineered grafts for bone regeneration. Adv Healthc Mater 10(14):e2100408. https://doi.org/10.1002/adhm.20210040810.1002/adhm.202100408 ↗
13. Wu Y, Liu P, Feng C, Cao Q, Xu X, Liu Y, Li X, Zhu X, Zhang X (2024) 3D printing calcium phosphate ceramics with high osteoinductivity through pore architecture optimization. Acta Biomater 185:111–125. https://doi.org/10.1016/j.actbio.2024.07.00810.1016/j.actbio.2024.07.008 ↗
14. Wang W, Yeung KWK (2017) Bone grafts and biomaterials substitutes for bone defect repair: a review. Bioact Mater 2(4):224–247. https://doi.org/10.1016/j.bioactmat.2017.05.00710.1016/j.bioactmat.2017.05.007 ↗
15. Zhang Y, Li J, Soleimani M, Giacomini F, Friedrich H, Truckenmüller R, Habibovic P (2021) Biodegradable elastic sponge from nanofibrous biphasic calcium phosphate ceramic as an advanced material for regenerative medicine. Adv Funct Mater. https://doi.org/10.1002/adfm.20210291110.1002/adfm.202102911 ↗
16. Tang Z, Li X, Tan Y, Fan H, Zhang X (2018) The material and biological characteristics of osteoinductive calcium phosphate ceramics. Regen Biomater 5(1):43–59. https://doi.org/10.1093/rb/rbx02410.1093/rb/rbx024 ↗
17. Wei Y, Zhao D, Cao Q, Wang J, Wu Y, Yuan B, Li X, Chen X, Zhou Y, Yang X, Zhu X, Tu C, Zhang X (2020) Stereolithography-based additive manufacturing of high-performance osteoinductive calcium phosphate ceramics by a digital light-processing system. ACS Biomater Sci Eng 6(3):1787–1797. https://doi.org/10.1021/acsbiomaterials.9b0166310.1021/acsbiomaterials.9b01663 ↗
18. Kowsari K, Zhang B, Panjwani S, Chen Z, Hingorani H, Akbari S, Fang NX, Ge Q (2018) Photopolymer formulation to minimize feature size, surface roughness, and stair-stepping in digital light processing-based three-dimensional printing. Addit Manuf 24:627–638. https://doi.org/10.1016/j.addma.2018.10.03710.1016/j.addma.2018.10.037 ↗
19. Clemens F, Sarraf F, Borzì A, Neels A, Hadian A (2023) Material extrusion additive manufacturing of advanced ceramics: towards the production of large components. J Eur Ceram Soc 43(7):2752–2760. https://doi.org/10.1016/j.jeurceramsoc.2022.10.01910.1016/j.jeurceramsoc.2022.10.019 ↗
20. Liu Q, Zhai W (2022) Hierarchical porous ceramics with distinctive microstructures by emulsion-based direct ink writing. ACS Appl Mater Interfaces 14(28):32196–32205. https://doi.org/10.1021/acsami.2c0324510.1021/acsami.2c03245 ↗
21. Konstantinou G, Kakkava E, Hagelüken L, Warriam Sasikumar PV, Wang J, Makowska MG, Blugan G, Nianias N, Marone F, van Swygenhoven H, Brugger J, Psaltis D, Moser C (2020) Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin. Addit Manuf 35:101343. https://doi.org/10.1016/j.addma.2020.10134310.1016/j.addma.2020.101343 ↗
22. Wu Y, Cao Q, Wang Y, Liu Y, Xu X, Liu P, Li X, Zhu X, Zhang X (2023) Optimized fabrication of DLP-based 3D printing calcium phosphate ceramics with high-precision and low-defect to induce calvarial defect regeneration. Mater Des 233:112230. https://doi.org/10.1016/j.matdes.2023.11223010.1016/j.matdes.2023.112230 ↗
23. Brady AG, Chu T-M, Halloran JW (1996) Curing Behavior of Ceramic Resin for Stereolithography. Texas ScholarWorks
24. Chartier T, Chaput C, Doreau F, Loiseau M (2002) Stereolithography of structural complex ceramic parts. J Mater Sci 37(15):3141–3147. https://doi.org/10.1023/A:101610221027710.1023/A:1016102210277 ↗
25. Yared W, Gadow R (2024) Elimination of delamination cracks in ceramics manufactured using LCD stereolithography. Open Ceram 17:100531. https://doi.org/10.1016/j.oceram.2023.10053110.1016/j.oceram.2023.100531 ↗
26. Yared W, Xie L, Gadow R (2023) Manufacturability and geometrical limitations of β-tricalcium phosphate-filled resins using LCD stereolithography. Open Ceram 16:100473. https://doi.org/10.1016/j.oceram.2023.10047310.1016/j.oceram.2023.100473 ↗
27. Weingärtner L, Latorre SH, Velten D, Bernstein A, Schmal H, Seidenstuecker M (2021) The effect of Collagen-I coatings of 3D printed PCL scaffolds for bone replacement on three different cell types. Appl Sci 11(22):11063. https://doi.org/10.3390/app11221106310.3390/app112211063 ↗
28. Seidenstuecker M, Schilling P, Ritschl L, Lange S, Schmal H, Bernstein A, Esslinger S (2021) Inverse 3D printing with variations of the strand width of the resulting scaffolds for bone replacement. Materials. https://doi.org/10.3390/ma1408196410.3390/ma14081964 ↗
29. Maevskaia E, Guerrero J, Ghayor C, Bhattacharya I, Weber FE (2023) Triply periodic minimal surface-based scaffolds for bone tissue engineering: a mechanical, in vitro and in vivo study. Tissue Eng Part A. https://doi.org/10.1089/ten.tea.2023.003310.1089/ten.tea.2023.0033 ↗
30. Boccaccini A, Maquet V (2003) Bioresorbable and bioactive polymer/Bioglass® composites with tailored pore structure for tissue engineering applications. Compos Sci Technol 63(16):1–13. https://doi.org/10.1016/S0266-3538(03)00275-610.1016/S0266-3538(03)00275-6 ↗
31. Shahid MN, Shahid MU, Rasheed S, Irfan M, Obeidi MA (2024) Computational investigation of the fluidic properties of triply periodic minimal surface (TPMS) structures in tissue engineering. Designs 8(4):69. https://doi.org/10.3390/designs804006910.3390/designs8040069 ↗
32. Naghavi SA, Tamaddon M, Marghoub A, Wang K, Babamiri BB, Hazeli K, Xu W, Lu X, Sun C, Wang L, Moazen M, Wang L, Li D, Liu C (2022) Mechanical characterisation and numerical modelling of TPMS-based gyroid and diamond Ti6Al4V scaffolds for bone implants: an integrated approach for translational consideration. Bioengineering. https://doi.org/10.3390/bioengineering910050410.3390/bioengineering9100504 ↗
33. Seidenstuecker M, Lange S, Esslinger S, Latorre SH, Krastev R, Gadow R, Mayr HO, Bernstein A (2019) Inversely 3D-printed β-TCP scaffolds for bone replacement. Materials. https://doi.org/10.3390/ma1220341710.3390/ma12203417 ↗
34. Abbott A (2003) Cell culture: biology’s new dimension. Nature 424(6951):870–872. https://doi.org/10.1038/424870a10.1038/424870a ↗
35. Pereda M, Poncelet D, Renard D (2019) Characterization of core-shell alginate capsules. Food Biophys 14(4):467–478. https://doi.org/10.1007/s11483-019-09595-x10.1007/s11483-019-09595-x ↗
36. Bohner M (2000) Calcium orthophosphates in medicine: from ceramics to calcium phosphate cements. Injury 31(Suppl 4):37–47. https://doi.org/10.1016/s0020-1383(00)80022-410.1016/s0020-1383(00)80022-4 ↗
37. Bohner M (2001) Physical and chemical aspects of calcium phosphates used in spinal surgery. Eur Spine J 10(Suppl 2):S114–S121. https://doi.org/10.1007/s00586010027610.1007/s005860100276 ↗
38. Chen Y, Wang J, Zhu XD, Tang ZR, Yang X, Tan YF, Fan YJ, Zhang XD (2015) Enhanced effect of β-tricalcium phosphate phase on neovascularization of porous calcium phosphate ceramics: in vitro and in vivo evidence. Acta Biomater 11:435–448. https://doi.org/10.1016/j.actbio.2014.09.02810.1016/j.actbio.2014.09.028 ↗
39. Sandino C, Checa S, Prendergast PJ, Lacroix D (2010) Simulation of angiogenesis and cell differentiation in a CaP scaffold subjected to compressive strains using a lattice modeling approach. Biomaterials 31(8):2446–2452. https://doi.org/10.1016/j.biomaterials.2009.11.06310.1016/j.biomaterials.2009.11.063 ↗