Effect of Y2O3 rare earth oxide on the microstructure and growth kinetics of TiO2-based ceramic coatings fabricated by micro arc oxidation
Source abstract
Abstract
Abstract This study investigates the influence of Y 2 O 3 addition on the microstructure, growth kinetics, and mechanical properties of TiO 2 -based ceramic coatings formed on Ti–6Al–4V alloy through the Micro Arc Oxidation (MAO) process. The experiments were carried out using Ti–6Al–4V plates coated in silicate-based electrolytes, with and without 1 g/L Y 2 O 3 , under a constant current density of 5 A/dm 2 and a voltage of 360 ± 20 V for different treatment times (1, 3, 7, and 10 min). The coatings were evaluated by weight gain measurements, SEM/EDS analyses, X-ray diffraction (XRD), and constant load scratch testing supported by profilometry. Results revealed that Y 2 O 3 significantly accelerated coating growth during the initial stages, leading to higher weight gains and denser, less porous morphologies compared to Y 2 O 3 -free coatings. XRD analysis indicated amorphous TiO 2 and anatase phases at short durations, while rutile formation became dominant with longer treatments. Kinetic modeling demonstrated that both coatings initially followed a linear reaction-controlled mechanism (n ≈ 1), with calculated growth constants of 3.44 × 10⁻ 4 mg/mm 2 ·s for Ti-MAO and 7.45 × 10⁻ 4 mg/mm 2 s for Ti–Y 2 O 3 –MAO. However, after approximately 420 s, the Y 2 O 3 coatings exhibited a marked reduction in growth rate due to electrical insulation effects of the thickened ceramic layer, resulting in multi-stage kinetics. Constant load scratch testing showed that Y 2 O 3 incorporation reduced groove depth and width by nearly 45%, improving adhesion strength and mechanical durability. These findings confirm that rare-earth oxide addition is an effective strategy for enhancing the performance of MAO coatings on titanium alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Liu X, Dong S, Liu L et al (2025) Plasma electrolytic oxidation coating with sustainable corrosion protection through addition of Y2O3 nanoparticles at ultra-high frequency pulse current. Appl Surf Sci. 694: 1-17 https://doi.org/10.1016/j.apsusc.2025.16278310.1016/j.apsusc.2025.162783 ↗
2. Zhai D, Qiu T, Shen J, Feng K (2022) Growth kinetics and mechanism of microarc oxidation coating on Ti−6Al−4V alloy in phosphate/silicate electrolyte. Int J Miner Metall Mater 29:1991–1999. https://doi.org/10.1007/s12613-022-2413-810.1007/s12613-022-2413-8 ↗
3. Sobolev A, Bograchev D, Borodianskiy K, Zinigrad M (2022) Kinetics and mechanism of corrosion of oxide coating fabricated on aluminum alloy by the plasma electrolytic oxidation in molten salt. 208: 1-15 Corros Sci. https://doi.org/10.1016/j.corsci.2022.11060410.1016/j.corsci.2022.110604 ↗
4. Söğüt M, Ayday A (2024) Enhancing the wear resistance of pure Mg coated by plasma electrolytic oxidation by adding silver. El-Cezeri J Sci Eng 11:1–9. https://doi.org/10.31202/ecjse.123933810.31202/ecjse.1239338 ↗
5. Li H, Wang Z (2024) Corrosion behavior and incorporation mechanism of Y2O3-TiO2 composite coatings fabricated on TC4 titanium alloy by plasma electrolytic oxidation. Chem Phys Lett. 841:1-10 https://doi.org/10.1016/j.cplett.2024.14117010.1016/j.cplett.2024.141170 ↗
6. Erfanifar E, Aliofkhazraei M, Nabavi HF, Rouhaghdam AS (2017) Growth kinetics and morphology of microarc oxidation coating on titanium. Surf Coat Technol 315:567–576. https://doi.org/10.1016/j.surfcoat.2017.03.00210.1016/j.surfcoat.2017.03.002 ↗
7. Zhao J, Zhang X, Wu R et al (2025) Research progress on micro-arc oxidation of Mg–Li alloys: a review. Surf Interfaces. 69:1-19 https://doi.org/10.1016/j.surfin.2025.10679610.1016/j.surfin.2025.106796 ↗
8. Zhou L, Zhang Z, Qian J et al (2025) Effect of alumina sol modified electrolyte on the preparation and corrosion resistance of micro-arc oxidation ceramic coating on AZ31 magnesium alloy. Ceram Int. 51: 30450-30462 https://doi.org/10.1016/j.ceramint.2025.04.23910.1016/j.ceramint.2025.04.239 ↗
9. Ma G, Li Z, Zhao X et al (2025) Growth mechanism and product formation of micro-arc oxide film layers on aluminum matrix composites: an analytical experimental and computational simulation study. Appl Surf Sci. 684: 1-12 https://doi.org/10.1016/j.apsusc.2024.16196810.1016/j.apsusc.2024.161968 ↗
10. Kang B, Qian C, Qi S et al (2024) Structure and properties of cerium-doped TiO2 coatings on Ti40Nb alloy by micro-arc oxidation. Surf Coat Technol. 482: 1-8 https://doi.org/10.1016/j.surfcoat.2024.13073610.1016/j.surfcoat.2024.130736 ↗
11. Stojadinovic S, Vasilic R (2019) Spectroscopic study of micro-discharges during plasma electrolytic oxidation of Al–Zn–Si alloy. J Serb Chem Soc 84:915–923. https://doi.org/10.2298/JSC190418040S10.2298/JSC190418040S ↗
12. Luo Q, Yang Z, Wang P et al (2025) Effect of YbCl3 concentrations on characteristics of micro-arc oxidation coatings formed on Ti–3Al–2.5V alloys. J Mater Eng Perform. 34: 26430–26441 https://doi.org/10.1007/s11665-025-11220-710.1007/s11665-025-11220-7 ↗
13. Qi X, Gao H, He Y et al (2024) Microstructure and properties of a MAO/PA/MoS2 composite coating formed on 6063 aluminum alloy by micro arc oxidation. Surf Coat Technol.484: 1-16 https://doi.org/10.1016/j.surfcoat.2024.13083610.1016/j.surfcoat.2024.130836 ↗
14. Guo YP, Xue Z, Li G et al (2020) Effect of rare earth Y2O3 on the corrosion and friction properties of Al2O3 ceramic coatings prepared via microarc oxidation. Int J Electrochem Sci 15:7682–7692. https://doi.org/10.20964/2020.08.1110.20964/2020.08.11 ↗
15. Doleker KM, Yener T, Erdogan A et al (2025) Effect of Si and Cr on formation of aluminide coatings on Ti6Al4V alloy by low temperature aluminizing: wear and oxidation behavior. Surf Coat Technol. 509: 1-16 https://doi.org/10.1016/j.surfcoat.2025.13220710.1016/j.surfcoat.2025.132207 ↗
16. Amini R, Kardar P (2025) Rare earth-based conversion coatings under scrutiny: a comprehensive review. J Rare Earths 43:859–873. https://doi.org/10.1016/j.jre.2024.07.00210.1016/j.jre.2024.07.002 ↗
17. Saji VS (2019) Review of rare-earth-based conversion coatings for magnesium and its alloys. J Mater Res Technol 8:5012–5035. https://doi.org/10.1016/j.jmrt.2019.08.01310.1016/j.jmrt.2019.08.013 ↗
18. Yang X, Wang G, Dong G et al (2009) Rare earth conversion coating on Mg–8.5Li alloys. J Alloys Compd 487:64–68. https://doi.org/10.1016/j.jallcom.2009.07.11310.1016/j.jallcom.2009.07.113 ↗
19. Zhao K, Huang W, Deng P et al (2024) Mechanical properties, thermal shock resistance and stress evolution of plasma-sprayed 56 wt% Y2O3-stabilized ZrO2 thick thermal barrier coatings. 494:131352 Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2024.13135210.1016/j.surfcoat.2024.131352 ↗
20. Saeed EM, Dawood NM, Hasan SF (2021) Improvement corrosion resistance of Ni–Ti alloy by TiO2 coating and hydroxyaptite/TiO2 composite coating using micro arc oxidation process. Mater Today Proc 42:2789–2796. https://doi.org/10.1016/j.matpr.2020.12.72310.1016/j.matpr.2020.12.723 ↗
21. Wang X, Li C, Li M, Cao J (2021) Enhancing high-temperature oxidation resistance of Ti6Al4V alloy by simple surface aluminization. Corros Sci. 192: 1-9 https://doi.org/10.1016/j.corsci.2021.10981010.1016/j.corsci.2021.109810 ↗
22. Ayday A, Özsoy N, Yener T (2023) Taguchi optimization of electrolytic plasma hardening process parameters on Ti–6Al–4V alloy: microstructure and mechanical properties. Adv Eng Mater 25:1–10. https://doi.org/10.1002/adem.20230089610.1002/adem.202300896 ↗
23. Pasini WM, Borges SH, Kateusz F et al (2025) Synthesis, microstructure, growth kinetics and oxidation performance of complex concentrated silicide coatings on Nb7Ti7Al1Cr1 via hot-dip siliconizing. Open Ceram. 23:100810 https://doi.org/10.1016/j.oceram.2025.10081010.1016/j.oceram.2025.100810 ↗
24. Ozdemir O, Omar MA, Usta M et al (2008) An investigation on boriding kinetics of AISI 316 stainless steel. Vacuum 83:175–179. https://doi.org/10.1016/j.vacuum.2008.03.02610.1016/j.vacuum.2008.03.026 ↗
25. Qin Z, Zhang Y, Zhang X, Jin Z (2025) Enhancing fretting corrosion resistance of micro-arc oxidation coating with Y2O3 nanoparticles on biomedical Ti6Al4V alloy for hip implants. Surf Coatings Technol 513:132468. https://doi.org/10.1016/j.surfcoat.2025.13246810.1016/j.surfcoat.2025.132468 ↗
26. Wang S, Wu X, Xie F et al (2025) In-situ synthesis of ZnO/CuO nanocrystals in micro-arc oxidation coatings for enhanced antibacterial performance and corrosion resistance of aluminum alloys. J Mater Res Technol 39:7732–7748. https://doi.org/10.1016/j.jmrt.2025.11.10610.1016/j.jmrt.2025.11.106 ↗
27. Demirbaş Ç, Ayday A (2021) Effect of Ag concentration on structure and wear behaviour of coatings formed by micro-arc oxidation on Ti6Al4V Alloy. Surf Eng 37:24–31. https://doi.org/10.1080/02670844.2020.174121110.1080/02670844.2020.1741211 ↗
28. Chen Q, Li W, Ling K, Yang R (2020) Effect of Na2WO4 addition on formation mechanism and microstructure of micro-arc oxidation coating on Al–Ti double-layer composite plate. Mater Des. 190:108558 https://doi.org/10.1016/j.matdes.2020.10855810.1016/j.matdes.2020.108558 ↗
29. Ou KL, Shih YH, Huang CF et al (2008) Preparation of bioactive amorphous-like titanium oxide layer on titanium by plasma oxidation treatment. Appl Surf Sci 255:2046–2051. https://doi.org/10.1016/j.apsusc.2008.06.18910.1016/j.apsusc.2008.06.189 ↗
30. Xie Y, Wang X, Cui S et al (2024) Effect of micro-arc oxidation on antimicrobial properties and biocompatibility of biomedical Ti–xFe alloys. Surf Coatings Technol. 476: 130174 https://doi.org/10.1016/j.surfcoat.2023.13017410.1016/j.surfcoat.2023.130174 ↗
31. Xu L, Wu C, Lei X et al (2018) Effect of oxidation time on cytocompatibility of ultrafine-grained pure Ti in micro-arc oxidation treatment. Surf Coatings Technol 342:12–22. https://doi.org/10.1016/j.surfcoat.2018.02.04410.1016/j.surfcoat.2018.02.044 ↗
32. Fan C, Shi W, Lin F et al (2025) Impact of picosecond laser surface texturing on the microstructure and corrosion resistance of micro-arc oxidation coating on Ti–6Al–4V alloy. Surf Coatings Technol. 513: 132445 https://doi.org/10.1016/j.surfcoat.2025.13244510.1016/j.surfcoat.2025.132445 ↗
33. Kaseem M, Choe HC (2021) The effect of in-situ reactive incorporation of MoOx on the corrosion behavior of Ti–6Al–4 V alloy coated via micro-arc oxidation coating. Corros Sci. 192: 109764 https://doi.org/10.1016/j.corsci.2021.10976410.1016/j.corsci.2021.109764 ↗
34. Vangolu Y, Arslan E, Totik Y et al (2010) Optimization of the coating parameters for micro-arc oxidation of Cp–Ti. Surf Coatings Technol 205:1764–1773. https://doi.org/10.1016/j.surfcoat.2010.08.04210.1016/j.surfcoat.2010.08.042 ↗
35. Zhang P, Zhang Z, Li W, Zhu M (2013) Effect of Ti–OH groups on microstructure and bioactivity of TiO2 coating prepared by micro-arc oxidation. Appl Surf Sci 268:381–386. https://doi.org/10.1016/j.apsusc.2012.12.10510.1016/j.apsusc.2012.12.105 ↗
36. Xi F, Zhang X, Jiang X et al (2023) Growth mechanism of oxide layer on Ti–6Al–4V substrate with different surface topographies during the early stage of micro-arc oxidation. Surf Coatings Technol. 467: 129685 https://doi.org/10.1016/j.surfcoat.2023.12968510.1016/j.surfcoat.2023.129685 ↗
37. Zhou R, Wei D, Yang H et al (2014) MC3T3-E1 cell response of amorphous phase/TiO2 nanocrystal composite coating prepared by microarc oxidation on titanium. Mater Sci Eng, C 39:186–195. https://doi.org/10.1016/j.msec.2014.03.00610.1016/j.msec.2014.03.006 ↗
38. Barletta M, Tagliaferri V, Gisario A, Venettacci S (2013) Progressive and constant load scratch testing of single- and multi-layered composite coatings. Tribol Int 64:39–52. https://doi.org/10.1016/J.TRIBOINT.2013.03.00210.1016/J.TRIBOINT.2013.03.002 ↗
39. Zhou Y, Huang Y, Li J, Zhu F (2022) Effect of water film on the nano-scratching process of 4H-SiC under the constant load. Tribol Int 175:107802. https://doi.org/10.1016/J.TRIBOINT.2022.10780210.1016/J.TRIBOINT.2022.107802 ↗
40. Wang J, Xu G, Jia E et al (2024) Preparation of wear‐resistant ceramic coating by dynamically controlling the resistance during MAO. Int J Appl Ceram Technol 21:876–887. https://doi.org/10.1111/ijac.1459110.1111/ijac.14591 ↗
41. Feng Z, Li C, Xin C et al (2024) Composite microarc oxidation coatings containing Cu on titanium alloy. RSC Adv 14:32602–32612. https://doi.org/10.1039/D4RA06194B10.1039/D4RA06194B ↗
42. Grigoriev S, Peretyagin N, Apelfeld A et al (2023) Investigation of the characteristics of MAO coatings formed on Ti6Al4V titanium alloy in electrolytes with graphene oxide additives. J Compos Sci 7(4):142. https://doi.org/10.3390/JCS704014210.3390/JCS7040142 ↗