journal article·2026-04Open access

The effects of mold flux contamination on oxide scale formation and hydro-descaling efficiency during steel processing

Tochukwu Princewill Ojiako, Richard Osei, Mario Buchely, Haiming Wen, Simon Lekakh, Ronald O’Malley

Journal of Materials Science· Volume 61· Issue 14

Abstract

Abstract Oxide scale formation during thin-slab continuous casting has a complex structure, which is influenced by mold flux contamination, that modifies interfacial reactions during solidification, subsequent reheating, and descaling. While individual aspects of the oxidation behavior of carbon steel have been previously examined, the synergetic effects of mold flux contamination during continuous casting and subsequent reheating on scale modification and the efficiency of hydraulic descaling remain inadequately studied. This study quantitatively examines the effect of flux composition on oxide scale evolution, adhesion, and hydraulic removal in low-carbon steel under simulated industrial conditions. Slab samples with as-cast, cleaned, and flux-coated surfaces were reheated to 1065 °C in a controlled oxidizing atmosphere and immediately descaled using a computer numerical control (CNC)-controlled high-pressure water-jet system. The developed procedures closely simulate industrial conditions. The resulting scale morphologies and residuals after descaling were analyzed using cross-sectional scanning electron microscopy (SEM), Raman spectroscope and quantified through image J analysis. The results demonstrate that the mold flux composition significantly affects the structural evolution and adhesion characteristics of the oxide scale, thereby influencing its hydraulic removal performance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · High-Temperature Coating Behaviors · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Suarez LR, Coto X, Vanden Eynde M, Lamberigts, Houbaert Y (2007). High temperature oxidation of ultra-low-carbon steel. In: Defect and Diffusion Forum, vol. 258, pp. 158–163. Trans Tech Publications10.4028/www.scientific.net/DDF.258-260.158 ↗
2. Zhang M, Shao G (2007) Characterization and properties of oxide scales on hot-rolled strips. Mater Sci Eng A Mater Struct Prop Microstruct Process 452:189–193. https://doi.org/10.1016/j.msea.2006.10.15110.1016/j.msea.2006.10.151 ↗
3. Issaard W, Nilsonthi T (2023) Adhesion of thermal oxide scale formed on silicon-containing hot-rolled steel oxidized in oxygen. J Met Mater Miner 33(2):16–22. https://doi.org/10.55713/332.157510.55713/332.1575 ↗
4. Ojiako TP, Hatcher Jr J, Brost R, Barrette R, Osei R, Bader T, Buchely M, Lekakh S, O’Malley RJ (2024) Effect of atmosphere on scale evolution in continuous casting process. In: AISTech 2024 Iron and Steel Technology Conference, pp. 981–991. Association for Iron and Steel Technology, .https://doi.org/10.33313/388/103.10.33313/388/103 ↗
5. Aghaeian S, Sloof WG, Mol JMC, Böttger AJ (2022) Initial high-temperature oxidation behavior of Fe–Mn binaries in air: the kinetics and mechanism of oxidation. Oxid Met 98(1):217–237. https://doi.org/10.1007/s11085-022-10115-510.1007/s11085-022-10115-5 ↗
6. Arreola-Villa SA, Vergara-Hernández HJ, Solorio-Diáz G, Pérez-Alvarado A, Vázquez-Gómez O, Chávez-Campos GM (2022) Kinetic study of oxide growth at high temperature in low carbon steel. Metals 12(1):147. https://doi.org/10.3390/met1201014710.3390/met12010147 ↗
7. Himmel L, Mehl RF, Birchenall CE (1953) Self-diffusion of iron in iron oxides and the Wagner theory of oxidation. JOM 5(6):827–84310.1007/BF03397553 ↗
8. Wang X, Tu L, Wang Q, Zhang X, He S (2023) Wetting behavior of CaO–SiO2-and CaO–Al2O3-based mold slags on high-Ti steel. Metall Mater Trans B 54(2):959–968. https://doi.org/10.1007/s11663-023-02738-z10.1007/s11663-023-02738-z ↗
9. Wang F, Wang W, Du J, Zhang L, Sohn IL, Zeng J (2024) Oxidation behavior of Cr–Mn–Si alloyed steel by mold flux melt in high temperatures. J Mater Res Technol 29:3898–3909. https://doi.org/10.1016/j.jmrt.2024.02.12410.1016/j.jmrt.2024.02.124 ↗
10. Osei R (2022) Scale formation, properties and de-scaling in steelmaking. PhD. Dissertation, Missouri University of Science and Technology. [Online]. Available: https://scholarsmine.mst.edu/doctoral_dissertations/3157
11. Chen Y, Tan T, Chen H (2008) Oxidation companied by scale removal: initial and asymptotical kinetics. J Nucl Sci Technol 45(7):662–667. https://doi.org/10.1080/18811248.2008.971146610.1080/18811248.2008.9711466 ↗
12. Cao G, Shan W, Wang C, Zhou Z, Liu Z (2023) Isothermal structure transformation and kinetics behavior of oxide scale on low carbon steel. ISIJ Int 63(2):366–374. https://doi.org/10.2355/isijinternational.ISIJINT-2022-17910.2355/isijinternational.ISIJINT-2022-179 ↗
13. Tedmon CS (1966) The effect of oxide volatilization on the oxidation kinetics of Cr and Fe‐Cr alloys. J Electrochem Soc 113(8):76610.1149/1.2424115 ↗
14. Naipinij S, Sukieum S, Namprai R, Nilsonthi T (2022) Formation of thermal oxide scale and its adhesion to hot-rolled low carbon steels with different final strip thicknesses. In: E3S Web of Conferences (Vol. 355, p. 02008). EDP Sciences. https://doi.org/10.1051/e3sconf/20223550200810.1051/e3sconf/202235502008 ↗
15. Ngamkham K, Niltawach S, Chandra-Ambhorn S (2011) Development of tensile test to investigate mechanical adhesion of thermal oxide scales on hot-rolled steel strips produced using different finishing temperatures. Key Eng Mater 462:407–412. https://doi.org/10.4028/www.scientific.net/KEM.462-463.40710.4028/www.scientific.net/KEM.462-463.407 ↗
16. Kwon G-H, Park H, Choi B, Lee Y-K, Moon K (2023) Influence of Cr content on the high-temperature oxidation behavior and mechanism of low-alloy steels. Materials 16(14):4964. https://doi.org/10.3390/ma1614496410.3390/ma16144964 ↗
17. Lekakh Simon, Neroslavsky O (2024) Phenomenological analysis of surface degradation of metallic materials in extreme environment. Metall Mater Trans A 55(1):134–143. https://doi.org/10.1007/s11661-023-07234-210.1007/s11661-023-07234-2 ↗
18. Bergelt T, Graf M, Hunze-Tretow J (2024) Modelling of dynamic scale layer growth considering temperature, time and alloying elements. Metal Forming 2024(44):482. https://doi.org/10.21741/9781644903254-5210.21741/9781644903254-52 ↗
19. Osei R, Lekakh S, O’Malley R (2022) Effect of Cu additions on scale structure and descaling efficiency of low C steel reheated in a combustion gas atmosphere. Oxid Met 98(3):363–383. https://doi.org/10.1007/s11085-022-10125-310.1007/s11085-022-10125-3 ↗
20. Ahmadi D (2019) Oxide scales behavior during descaling and hot rolling. PhD dissertation, University of Sheffield
21. Haapakangas J, Riikonen S, Airaksinen S, Heikkinen E-P, Fabritius T (2024) Oxide scale formation on low-carbon steels in future reheating conditions. Metals 14(2):189. https://doi.org/10.3390/met1402018910.3390/met14020189 ↗
22. Airaksinen S, Haapakangas J, Laukka A, Heikkinen E-P, Fabritius T (2024) Oxide scale formation of stainless steels with different heating methods–effect of hydrogen as fuel. Steel Res Int 95(1):2300334. https://doi.org/10.1002/srin.20230033410.1002/srin.202300334 ↗
23. Persdotter A, Eklund J, Liske J, Jonsson T (2020) Beyond breakaway corrosion–influence of chromium, nickel and aluminum on corrosion of iron-based alloys at 600 C. Corros Sci 177:108961. https://doi.org/10.1016/j.corsci.2020.10896110.1016/j.corsci.2020.108961 ↗
24. Schütze M (1995) Mechanical properties of oxide scales. Oxid Met 44(1):29–6110.1007/BF01046722 ↗
25. Yu X, Jiang Z, Zhao J, Wei D, Zhou C, Huang Q (2014) Effect of a grain-refined microalloyed steel substrate on the formation mechanism of a tight oxide scale. Corros Sci 85:115–125. https://doi.org/10.1016/j.corsci.2014.04.00610.1016/j.corsci.2014.04.006 ↗
26. Webler BA, Sridhar S (2007) The effect of silicon on the high temperature oxidation behavior of low-carbon steels containing the residual elements copper and nickel. ISIJ Int 47(9):1245–125410.2355/isijinternational.47.1245 ↗
27. Gaiser G, Presoly P, Bernhard C, Ilie S (2025) Scaling behavior and surface quality of high-strength low-alloy steels with higher levels on Cu, Sn, and Ni under slab reheating conditions. High Temp Corros Mater 102(2):8. https://doi.org/10.1007/s11085-025-10329-310.1007/s11085-025-10329-3 ↗
28. Beygelzimer E, Beygelzimer Y (2021) Generalized estimates for thermal expansion of oxide scale in the range from 0C to 1300C with account for movability of phase transitions in its components. arXiv preprint arXiv:2110.08528
29. Watanabe K, Tsutsumi K, Suzuki M, Fujita H, Hatori S, Suzuki T, Omoto T (2014) Development of new mold flux for continuous casting based on non-Newtonian fluid properties. ISIJ Int 54(4):865–87110.2355/isijinternational.54.865 ↗
30. Zhou L, Li J, Wang W, Sohn I (2017) Wetting behavior of mold flux droplet on steel substrate with or without interfacial reaction. Metall Mater Trans B 48(4):1943–1950. https://doi.org/10.1007/s11663-017-0972-210.1007/s11663-017-0972-2 ↗
31. Gruber N (2023) Liquefaction controlling components and their effect on carbon-free mold powders. Metall Mater Trans B 54(6):3092–3100. https://doi.org/10.1007/s11663-023-02891-510.1007/s11663-023-02891-5 ↗
32. Wang W, Yan X, Zhou L, Xie S, Huang D (2016) Influences of basicity and Li2O on the properties of fluorine-free mold flux for the casting of medium carbon steels. Metall Mater Trans B 47(2):963–973. https://doi.org/10.1007/s11663-016-0597-x10.1007/s11663-016-0597-x ↗
33. Zhou L, Wang W, Lu B, Wen G, Yang J (2015) Effect of basicity and B2O3 on viscosity, melting and crystallization behaviors of low fluorine mold fluxes for casting medium carbon steels. Met Mater Int 21(1):126–133. https://doi.org/10.1007/s12540-015-1015-710.1007/s12540-015-1015-7 ↗
34. Wang W, Blazek K, Cramb A (2008) A study of the crystallization behavior of a new mold flux used in the casting of transformation-induced-plasticity steels. Metall and Mater Trans B 39(1):66–74. https://doi.org/10.1007/s11663-007-9110-x10.1007/s11663-007-9110-x ↗
35. Wei J, Wang W, Zhou L, Huang D, Zhao H, Ma F (2014) Effect of Na2O and B2O3 on the crystallization behavior of low fluorine mold fluxes for casting medium carbon steels. Metall Mater Trans B 45(2):643–652. https://doi.org/10.1007/s11663-013-9957-y10.1007/s11663-013-9957-y ↗
36. Osei R, Dmitry T, Anthony B, Simon L, Ronald JO (2022) Effect of mold powder residue on thin-cast slab scale structure evolution during reheating and descaling. In: AISTech-iron and steel technology conference proceedings, vol. 2022, pp. 790-799. https://doi.org/10.33313/386/09010.33313/386/090 ↗
37. Cheung Kelvin H (2012) The effect of mold flux on reheat scale austenitic stainless-steel slabs. PhD. Dissertation, Carnegie Mellon University
38. Pineda Huitron RM, Ramírez López PE, Vuorinen E, Nazen Jalali P, Pelcastre L, Kärkkäinen M (2020) Scale formation on HSLA steel during continuous casting Part I: the effect of temperature–time on oxidation kinetics. Metals 10(9):1243. https://doi.org/10.3390/met1009124310.3390/met10091243 ↗
39. Huitron RMP, Ramírez López PE, Vuorinen E, Nazen Jalali P, Pelcastre L, Kärkkäinen M (2020) Scale formation on HSLA steel during continuous casting part II: the effect of surface conditions. Metals 10(9):1–19. https://doi.org/10.3390/met1009124510.3390/met10091245 ↗
40. Brandaleze E, Martin A, Madias J, Benavidez E, González Oliver C, Bustillo Km A (2007). Influence of Different Additions on the Behavior of Mold Fluxes. In: AIST Proceedings: AISTech 2007
41. Waldner C, Hirn U (2023) Modeling liquid penetration into porous materials based on substrate and liquid surface energies. J Colloid Interface Sci 640:445–455. https://doi.org/10.1016/j.jcis.2023.02.11610.1016/j.jcis.2023.02.116 ↗
42. Sun W (2005) A study on the characteristics of oxide scale in hot rolling of steel. Ph.D. Dissertation, University of Wollongong
43. Yu Q (2008) An effective descaling system for hot rolling. Iron Steel Technol 5(10):94–107
44. Ojiako TP, Athavale VA, Osei R, Tayebali T, Sasso O, Buchely MF, Bartlett LN, Lekakh S, O’Malley RJ (2023) Effect of water Jet Nozzle lead angle on descaling efficiency. In: AISTech-iron and steel technology conference proceedings. https://doi.org/10.33313/387/15910.33313/387/159 ↗
45. Sheasby JS, Boggs WE, Turkdogan ET (1984) Scale growth on steels at 1200 C: rationale of rate and morphology. Met Sci 18(3):127–13610.1179/msc.1984.18.3.127 ↗
46. Rutkowski B, Baran K, Błoniarz R, Kozieł T (2021) The morphology and microstructure of oxide scale grown on austenitic steel during steam oxidation at 700° C for 500 h. Materials 14(14):3821. https://doi.org/10.3390/ma1414382110.3390/ma14143821 ↗
47. Raudensky M, Horak A, Horsky J, Pohanka M, Kotrbacek P (2007) Hydraulic descaling improvement, findings of jet structure on water hammer effect. Revue de Métallurgie 104(2):84–9010.1051/metal:2007133 ↗
48. Horsky J, Raudensky M, Vavrecka L (2007) Experimental study of hydraulic descaling. HEFAT
49. Ojiako TP, Buchely MF, Lekakh S, O’Malley RJ, Osei R, Tayebali T (2025) Parametric analysis of water jet descaling efficiency of reheated continuously cast thin slab. Steel Res Int. https://doi.org/10.1002/srin.20250048110.1002/srin.202500481 ↗
50. Pohanka M, Kotrbacek P, Bartuli E, Raudensky M (2020) Energy-efficient cooling and hydraulic descaling systems. Metallurgist 64(7):729–74010.1007/s11015-020-01050-4 ↗
51. Pohanka M, Raudenský M, Hwang JY, You JW, Lee SH (2016) Mutual collision of water jets from adjacent high-pressure flat jet nozzles on flat surfaces during hydraulic descaling. Tech Gaz 23(5):1389–1394
52. Wen J, Chen C (2017) Optimizing the structure of the straight cone nozzle and the parameters of borehole hydraulic mining for Huadian oil shale based on experimental research. Energies 10(12):2021. https://doi.org/10.3390/en1012202110.3390/en10122021 ↗
53. Wright D (2013) Impact force of high-pressure waterjets. In: Proceeding of WJTA-IMCA Conference and Expo. Houston, Texas
54. Lee P, Choi H, Lee S (2004) The effect of nozzle height on cooling heat transfer from a hot steel plate by an impinging liquid jet. ISIJ Int 44(4):704–70910.2355/isijinternational.44.704 ↗