journal article·2026-04

Mechanistic insights into the dislocation-grain boundary interaction and geometric dilution effect in high-oxygen Grade 4 titanium during cold rolling

Sheng Huang, Chao Chen, Jie Li, Haowei Liang, Kun Liu, Jiaxin Yu, Han Xiao

Journal of Materials Science· Volume 61· Issue 14
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Guan B, Xin Y, Huang X, Liu C, Wu P, Liu Q (2022) The mechanism for an orientation dependence of grain boundary strengthening in pure titanium. Int J Plast 153:103276. https://doi.org/10.1016/j.ijplas.2022.10327610.1016/j.ijplas.2022.103276 ↗
2. Zhao S, Xin C, Wu W, Xu W, Zeng Z (2022) High-strength titanium alloys for aerospace engineering applications: A review on melting-forging process. Mater Sci Eng: A 845:143260. https://doi.org/10.1016/j.msea.2022.14326010.1016/j.msea.2022.143260 ↗
3. Zhou H, Peng L, Zhao S, Guo S, Song Z, Chen K (2025) A precipitation hardened austenitic stainless steel with excellent stress corrosion cracking resistance against high-temperature water. Corros Sci 257:113. https://doi.org/10.1016/j.corsci.2025.11335210.1016/j.corsci.2025.113352 ↗
4. Zhang K, Shen Z, Li J, MaGaoWang SSH, Zeng X (2026) Anomalous oxidation behavior and enhanced corrosion resistance of a lean-Cr FeCrAl alloy in the oxygenated PWR primary water. Corros Sci 259:113452. https://doi.org/10.1016/j.corsci.2025.11345210.1016/j.corsci.2025.113452 ↗
5. Wang Y, Zhou Z, Lu J, Chen L, Jia H, Tong Z, Schroer C, Liu Y, Chen K, Shen Z, Zeng X (2026) Effect of Si addition on the oxidation of a 12Cr1Al ODS alloy in liquid LBE. Prog Nucl Energy 193:106226. https://doi.org/10.1016/j.pnucene.2025.10622610.1016/j.pnucene.2025.106226 ↗
6. Shen Y, Shen Z, Zhang K, Zhao Y, DongChen ZK, Zhang L, Gao S, Sun Z, Zeng X (2026) Superior corrosion resistance and crack tolerance of FeCrAl coatings on Zr alloy under hydrogenated and oxygenated PWR primary water. Corros Sci 259:113492. https://doi.org/10.1016/j.corsci.2025.11349210.1016/j.corsci.2025.113492 ↗
7. Zhou C, You S, Li S, Dang Z, Lozano-Perez Z, Shen Z (2026) Oxide stress and fracture susceptibility on a surface gradient microstructure of an additively manufactured steel. Acta Mater 304:121779. https://doi.org/10.1016/j.actamat.2025.12177910.1016/j.actamat.2025.121779 ↗
8. Chen K, Zhou Y, Shen Z, Scenini F, Lozano-Perez S (2026) Insights into the complexities of diffusion-induced grain boundary migration in Fe-Cr-Ni ternary alloys. Acta Mater 305:121836. https://doi.org/10.1016/j.actamat.2025.12183610.1016/j.actamat.2025.121836 ↗
9. Zhou X, Geng S, Liu M, Wang Q, Wang F (2021) Mechanical properties, corrosion behavior and cytotoxicity of Ti-6Al-4V alloy fabricated by laser metal deposition. Mater Charact 179:111302. https://doi.org/10.1016/j.matchar.2021.11130210.1016/j.matchar.2021.111302 ↗
10. Abbasi M, Ahmadi F, Farzin M (2021) Production of ultrafine-grained titanium with suitable properties for dental implant applications by RS-ECAP process. Met Mater Int 27(4):705–716. https://doi.org/10.1007/s12540-020-00796-510.1007/s12540-020-00796-5 ↗
11. Li H, Zhang S, Liu F (2024) Biocompatible TA4 and TC4ELI with excellent mechanical properties and corrosion resistance via multiple ECAP. Biomed Mater 20(1):015026. https://doi.org/10.1088/1748-605X/ad9af010.1088/1748-605X/ad9af0 ↗
12. Huang Z, Lin W, Zhao J, Mao C (2021) Effects of oxygen content on Charpy impact properties and crack resistance of α titanium alloys. Mater Sci Eng: A 818:141394. https://doi.org/10.1016/j.msea.2021.14139410.1016/j.msea.2021.141394 ↗
13. Choi SW, Jeong JS, Won JW, Hong JK, Choi YS (2021) Grade-4 commercially pure titanium with ultrahigh strength achieved by twinning-induced grain refinement through cryogenic deformation. J Mater Sci Technol 66:193–201. https://doi.org/10.1016/j.jmst.2020.04.08210.1016/j.jmst.2020.04.082 ↗
14. ChongGholizadeh YR, Tsuru T, Zhang R, Inoue K, Gao W, Godfrey A, Mitsuhara M, Morris JW, Minor AM, Tsuji N (2023) Grain refinement in titanium prevents low temperature oxygen embrittlement. Nat Commun 14(1):404. https://doi.org/10.1038/s41467-023-36030-010.1038/s41467-023-36030-0 ↗
15. Song T, Chen Z, Cui X, LuChen SH, Wang H, Dong T, Qin B, ChanBrandt KCM, Liao X (2023) Strong and ductile titanium–oxygen–iron alloys by additive manufacturing. Nature 618(7963):63–68. https://doi.org/10.1038/s41586-023-05952-610.1038/s41586-023-05952-6 ↗
16. Okabe TH, Kamimura G, Ikeda T, Ouchi T (2024) Direct production of low-oxygen-concentration titanium from molten titanium. Nat Commun 15(1):5015. https://doi.org/10.1038/s41467-024-49085-410.1038/s41467-024-49085-4 ↗
17. Wang F, Elkot MN, Yao N, Sun B, Song M, Wang Z, Raabe D (2024) Shearing brittle intermetallics enhances cryogenic strength and ductility of steels. Science 384(6699):1017–1022. https://doi.org/10.1126/science.ado291910.1126/science.ado2919 ↗
18. Wang Z, An F, Song M, Ponge D, Raabe D, Li Z (2022) High stress twinning in a compositionally complex steel of very high stacking fault energy. Nat Commun 13(1):3598. https://doi.org/10.1038/s41467-022-31315-210.1038/s41467-022-31315-2 ↗
19. Zhao S, Yu Q, Ell J, Ritchie RO, Minor AM (2021) Cryoforged nanotwinned titanium with ultrahigh strength and ductility. Science 373(6561):1363–1368. https://doi.org/10.1126/science.abe725210.1126/science.abe7252 ↗
20. Su W, Guo F, Ran H, WangCheng QQ, ZhuMaHuang YXC (2024) Heterostructure enables anomalous improvement of cryogenic mechanical properties in titanium. Acta Mater 273:119982. https://doi.org/10.1016/j.actamat.2024.11998210.1016/j.actamat.2024.119982 ↗
21. Wang S, Huang Z, Gao B, Chen X, Hu J, Zhu Y, Li Y, Zhou H (2024) New deformation mechanism and strength-ductility synergy in pure titanium with high density twin. Int J Plast 174:103908. https://doi.org/10.1016/j.ijplas.2024.10390810.1016/j.ijplas.2024.103908 ↗
22. Chong Y, Hooshmand MS, Zhao S, Chrzan DC, Asta M, Morris JW, Minor AM (2021) Elimination of oxygen sensitivity in α-titanium by substitutional alloying with Al. Nat Commun 12(1):6158. https://doi.org/10.1038/s41467-021-26374-w10.1038/s41467-021-26374-w ↗
23. Chong Y, Poschmann M, Zhang R, Zhao S, Hooshmand MS, Rothchild E, Olmsted DL, Morris JW, Chrzan DC, Asta M, Minor AM (2020) Mechanistic basis of oxygen sensitivity in titanium. Sci Adv 6(43):eabc4060. https://doi.org/10.1126/sciadv.abc406010.1126/sciadv.abc4060 ↗
24. Kuczyńska-Zemła D, Sotniczuk A, Kijeńska-Gawrońska E, Walejewska E, Chlanda A, Majchrowicz K, Garbacz H (2024) A novel approach to enhance mechanical properties of Ti substrates for biomedical applications. J Alloy Compd 970:172455. https://doi.org/10.1016/j.jallcom.2023.17245510.1016/j.jallcom.2023.172455 ↗
25. FanSunSongZhangXie ZXJXC (2009) Microstructures and mechanical deformation behaviors of ultrafine-grained commercial pure (grade 3) Ti processed by two-step severe plastic deformation. Mater Sci Eng, A 527(1):45–51. https://doi.org/10.1016/j.msea.2009.07.03010.1016/j.msea.2009.07.030 ↗
26. Jia Z, Zhang Y, Xu Y, Chen Y, Deng X, Zhang F, Wang L, Guo D (2023) Hot and cold rolling of a novel near-α titanium alloy: Mechanical properties and underlying deformation mechanism. Mater Sci Eng A 863:144543. https://doi.org/10.1016/j.msea.2022.14454310.1016/j.msea.2022.144543 ↗
27. Mironov Z, Semiatin SL (2022) The grain-refinement mechanism during heavy cold-rolling of commercial-purity titanium. J Alloy Compd 895:162689. https://doi.org/10.1016/j.jallcom.2021.16268910.1016/j.jallcom.2021.162689 ↗
28. Kang DS, Kwon EP, Takaki S (2015) Variation of work hardening rate by oxygen contents in pure titanium alloy. Mater Sci Eng A 632:120–126. https://doi.org/10.1016/j.msea.2015.02.07410.1016/j.msea.2015.02.074 ↗
29. He C, Zhang Z, Wang B, Zhang H, Ren Z, Zhang C, Hou J, Wang T (2025) Twinning behavior and texture evolution of pure titanium during corrugated-flat rolling under wide temperature range. J Alloys Compd 1024:180198. https://doi.org/10.1016/j.jallcom.2025.18019810.1016/j.jallcom.2025.180198 ↗
30. Zherebtsov SV, Salem AA, Malysheva SP, Salishchev GA, Semiatin SL (2011) Evolution of grain and subgrain structure during cold rolling of commercial-purity titanium. Mater Sci Eng A 528(9):3474–3479. https://doi.org/10.1016/j.msea.2011.01.03910.1016/j.msea.2011.01.039 ↗
31. Rodney D, Clouet E, Willaime F (2017) Ab initio modeling of dislocation core properties in metals and semiconductors. Acta Mater 124:633–659. https://doi.org/10.1016/j.actamat.2016.09.04910.1016/j.actamat.2016.09.049 ↗
32. Dinda GP, Wilde G (2005) Synthesis of bulk nanostructured Ni, Ti and Zr by repeated cold-rolling. Scripta Mater 52(7):577–582. https://doi.org/10.1016/j.scriptamat.2004.11.03410.1016/j.scriptamat.2004.11.034 ↗
33. Wu HC, Wang J, Bi XF, Tomé CN, Zhang Z, Mao SX (2016) Rolling-induced face centered cubic titanium in hexagonal Close packed titanium at room temperature. Sci Rep 6(1):24370. https://doi.org/10.1038/srep2437010.1038/srep24370 ↗
34. Kim HS, Yoo SJ, Ahn JW, Kim DH, Kim WJ (2011) Ultrafine grained titanium sheets with high strength and high corrosion resistance. Mater Sci Eng: A 528(29):8479–8485. https://doi.org/10.1016/j.msea.2011.07.07410.1016/j.msea.2011.07.074 ↗
35. Wyatt J, Zhu A (2012) Deformation mechanisms and kinetics of time-dependent twinning in an α-titanium alloy. Int J Plast 39:119–131. https://doi.org/10.1016/j.ijplas.2012.06.00110.1016/j.ijplas.2012.06.001 ↗
36. Calcagnotto M, Demir E, Raabe D (2010) Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD. Mater Sci Eng A 527(10):2738–2746. https://doi.org/10.1016/j.msea.2010.01.00410.1016/j.msea.2010.01.004 ↗
37. Won K, Hong L (2016) Anisotropy in twinning characteristics and texture evolution of rolling textured high purity alpha phase titanium. J Alloy Compd 683:92–99. https://doi.org/10.1016/j.jallcom.2016.05.02910.1016/j.jallcom.2016.05.029 ↗
38. Chun YB, Davies CH, Hwang SK (2010) Distribution characteristics of In-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes. Metall Mater Trans A 41A(13):3473–3487. https://doi.org/10.1007/s11661-010-0410-410.1007/s11661-010-0410-4 ↗
39. Meng C, Nie G, Mao Z (2021) Microstructure evolution and mechanical properties of commercial pure titanium subjected to rotary swaging. J Alloys Compd 859:158222. https://doi.org/10.1016/j.jallcom.2020.15822210.1016/j.jallcom.2020.158222 ↗
40. Chun H (2008) Static recrystallization of warm-rolled pure Ti influenced by microstructural inhomogeneity. Acta Mater 56(3):369–379. https://doi.org/10.1016/j.actamat.2007.09.04010.1016/j.actamat.2007.09.040 ↗
41. Benmessaoud C, Velay V, Vidal V, Matsumoto H (2020) Role of grain size and crystallographic texture on tensile behavior induced by sliding mechanism in Ti-6Al-4V alloy. Mater Sci Eng A 774:138835. https://doi.org/10.1016/j.msea.2019.13883510.1016/j.msea.2019.138835 ↗
42. Wu K, Necker C, Salem AA (2007) Prediction of crystallographic texture evolution and anisotropic stress–strain curves during large plastic strains in high purity α-titanium using a Taylor-type crystal plasticity model. Acta Mater 55(2):423–432. https://doi.org/10.1016/j.actamat.2006.08.03410.1016/j.actamat.2006.08.034 ↗
43. Cao N, Liao S, Zhu Y (2018) Structural evolutions of metallic materials processed by severe plastic deformation. Mater Sci Eng R Rep 133:1–59. https://doi.org/10.1016/j.mser.2018.06.00110.1016/j.mser.2018.06.001 ↗
44. Liu C, Mao Z, Zhao J, Liu W, You Z (2020) Critical microstructures and defects in heterostructured materials and their effects on mechanical properties. Acta Mater 189:129–144. https://doi.org/10.1016/j.actamat.2020.03.00110.1016/j.actamat.2020.03.001 ↗
45. Zhang HW, Hansen N (2008) Evolution of microstructural parameters and flow stresses toward limits in nickel deformed to ultra-high strains. Acta Mater 56(19):5451–5465. https://doi.org/10.1016/j.actamat.2008.07.04010.1016/j.actamat.2008.07.040 ↗
46. Baudoin P, Takuda H (2019) Influence of critical resolved shear stress ratios on the response of a commercially pure titanium oligocrystal: crystal plasticity simulations and experiment. Int J Plast 115:111–131. https://doi.org/10.1016/j.ijplas.2018.11.01310.1016/j.ijplas.2018.11.013 ↗
47. Mironov Z, Semiatin SL (2022) The unusual character of microstructure evolution during “abc” deformation of commercial-purity titanium. J Alloy Compd 913:165281. https://doi.org/10.1016/j.jallcom.2022.16528110.1016/j.jallcom.2022.165281 ↗
48. Dyakonov M, Semenova V, Semiatin SL (2017) Microstructure evolution and strengthening mechanisms in commercial-purity titanium subjected to equal-channel angular pressing. Mater Sci Eng, A 701:289–301. https://doi.org/10.1016/j.msea.2017.06.07910.1016/j.msea.2017.06.079 ↗
49. Wang H (2003) Texture analysis in hexagonal materials. Mater Chem Phys 81(1):11–26. https://doi.org/10.1016/S0254-0584(03)00168-810.1016/S0254-0584(03)00168-8 ↗
50. Huang J, Zhang KM, Jia YF, Zhang CC, Zhang XC, Ma XF, Tu ST (2019) Effect of thermal annealing on the microstructure, mechanical properties and residual stress relaxation of pure titanium after deep rolling treatment. J Mater Sci Technol 35(3):409–417. https://doi.org/10.1016/j.jmst.2018.10.00310.1016/j.jmst.2018.10.003 ↗
51. Majchrowicz K, Sotniczuk A, Adamczyk-Cieślak B, Chromiński W, Jóźwik P, Pakieła Z, Garbacz H (2023) The influence of microstructure and texture on the hardening by annealing effect in cold-rolled titanium. J Alloy Compd 948:16979. https://doi.org/10.1016/j.jallcom.2023.16979110.1016/j.jallcom.2023.169791 ↗