Fretting fatigue behavior of Ti6Al4V dovetail structure under shot peening and salt spray corrosion treatment
Source abstract
Abstract
The surface integrity and fretting fatigue behavior of Ti6Al4V dovetail structure treated by shot peening (SP), salt spray corrosion (SS) and shot peening combined with salt spray corrosion (SP+SS), respectively were studied. The findings indicate that SP introduces residual compressive stress (RCS) layer and hardened layer. The SS causes the development of pitting pits and corrosion products, induces intergranular corrosion in SP samples, triggering the release of RCS introduced by SP. Compared with AS samples, the fatigue lifetime of SP and SS samples are respectively increased and decreased by 162% and 41%, and the cracks initiation and propagation mechanisms are changed. Compared with SP samples, the fatigue lifetime of SP+SS samples was shortened by 24% but the fatigue damage form and crack initiation mechanism did not change. SP treatment benefits from the plastic deformation caused by surface dislocations, which improves the crack initiation life. SS treatment generates the corrosion pits of surface, manifested as notch effect and reduces the crack initiation life.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Surface Treatment and Residual Stress · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Arab A, Chen PW, Guo YS (2019) Effects of microstructure on the dynamic properties of TA15 titanium alloy. Mech Mater 137:10312110.1016/j.mechmat.2019.103121 ↗
2. Yang C, Liu YG, Shi YH, Li MQ (2020) Microstructure characterization and tensile properties of processed TC17 via high energy shot peening. Mater Sci Eng A 784:13929810.1016/j.msea.2020.139298 ↗
3. Xu P, Pyczak F, Limberg W, Willumeit-Römer R, Ebel T (2021) Superior fatigue endurance exempt from high processing cleanliness of metal-injection-molded β Ti–Nb–Zr for bio-tolerant applications. Mater Design 211:11014110.1016/j.matdes.2021.110141 ↗
4. Srivathsan S, Raman SGS (2022) Fretting fatigue behaviour of Ti–6Al–4V in contact with Alloy 718. Tribol-Mater Surf In 16:143–15210.1080/17515831.2021.1930343 ↗
5. Fang XY, Wang Z, Wang W, Cao XY, Li DJ, Wang ZG, Gong JE, Cai ZB (2024) Improvement mechanism of fretting fatigue lifetime of turbine dovetail tenon by shot peening combined with CuNiIn coating at 500 ℃. Surf Coat Tech 494:13153810.1016/j.surfcoat.2024.131538 ↗
6. Mangardich D, Abrari F, Fawaz Z (2019) A fracture mechanics based approach for the fretting fatigue of aircraft engine fan dovetail attachments. Int J Fatigue 129:10521310.1016/j.ijfatigue.2019.105213 ↗
7. Ikuta T, Takahama K, Nojima K, Nishi R, Ono Y, Koide T (2023) Bending fatigue strength and impact strength of case-carburized gears subjected to case-depth modification by additional heat treatments. J Mech Sci Technol 37:6115–612210.1007/s12206-023-2404-3 ↗
8. Asgaribakhtiari H, Majzoobi GH, Elmkhah H (2023) On the effect of Cr/CrN nanolayered coating deposited by Arc-PVD method on axial fretting fatigue behavior of Al7075–T6 alloy. Surf Coat Tech 454:12917610.1016/j.surfcoat.2022.129176 ↗
9. Fan KF, Liu DX, Zhou K, Liu YJ, Zhang H, Zhang XH, Li YY, Li MY, Li Y, Wahab MA (2024) Enhanced fretting fatigue strength of TC11 titanium alloy using laser-assisted ultrasonic surface rolling process. Tribol Int 195:10961910.1016/j.triboint.2024.109619 ↗
10. Yuan TY, Dou M, Liu L, Li L, Sun SY, Hu CY (2023) Improving high temperature fretting fatigue performance of nickel-based single crystal superalloy by shot peening. Int J Fatigue 171:10756310.1016/j.ijfatigue.2023.107563 ↗
11. Sadallah A, Miao HY, Changeux B, Bitar-Nehme E, Chakraborty A,Turenne S, Martin E (2024) Effect of shot peening and high-temperature shot peening on the high cycle fatigue of 7010-T7452 aluminum alloy. In: TMS annual meeting & exhibition, p 171–17610.1007/978-3-031-50308-5_21 ↗
12. Yang Q, Zhou WL, Gai PT, Zhang XH, Fu XS, Chen GQ, Li ZQ (2017) Investigation on the fretting fatigue behaviors of Ti6Al4V dovetail joint specimens treated with shot-peening. Wear 372:81–9010.1016/j.wear.2016.12.004 ↗
13. Liu L, Sun SY, Chen HT, Yuan TY, Li J, Huo YX, Li L (2024) Effects of shot peening on improving high-temperature fretting fatigue performance of nickel-based single crystal superalloy tenon attachment. Int J Fatigue 188:10854010.1016/j.ijfatigue.2024.108540 ↗
14. Zhang Z, Lin M, Seng DHL, Teo SL, Wei FX, Tan HR, Cheong AKH, Lim SH, Wang SJ, Pan JS (2020) Fatigue life enhancement in alpha/beta Ti–6Al–4V after shot peening: an EBSD and TEM crystallographic orientation mapping study of surface layer. Materialia 12:10081310.1016/j.mtla.2020.100813 ↗
15. de Sousa Araujo JV, Donatus U, Queiroz FM, Terada M, Milagre MX, de Alencar MC, Costa I (2018) On the severe localized corrosion susceptibility of the AA2198-T851 alloy. Corros Sci 133:132–14010.1016/j.corsci.2018.01.028 ↗
16. Joseph S, Lindley TC, Dye D, Saunders EA (2018) The mechanisms of hot salt stress corrosion cracking in titanium alloy Ti–6Al–2Sn–4Zr–6Mo. Corros Sci 134:169–17810.1016/j.corsci.2018.02.025 ↗
17. Myers JR, Hall JA (1977) Hot salt stress corrosion cracking of titanium alloys: an improved model for the mechanism. Corrosion 33(7):252–25710.5006/0010-9312-33.7.252 ↗
18. Chen W, Zhang DL, Wang EL, Yan F, Xiang L, Xie ZW (2022) Corrosion degradation behaviors of Ti6Al4V alloys in simulated marine environments. Coatings 12(7):102810.3390/coatings12071028 ↗
19. Li JQ, Lin X, Guo PF, Song MH, Huang WD (2018) Electrochemical behaviour of laser solid formed Ti–6Al–4V alloy in a highly concentrated NaCl solution. Corros Sci 142:161–17410.1016/j.corsci.2018.07.023 ↗
20. Xie LF, Zhou WL (2022) Salt spray corrosion behavior and pitting resistance of Ti–15V–3Cr–3Al–3Sn alloy evaluated using XPS, SKPFM, and electrochemical technique. J Solid State Electr 26(8):1585–160310.1007/s10008-022-05193-z ↗
21. Mahobia GS, Paulose N, Mannan SL, Sudhakar RG, Chattopadhyay K, Santhi Srinivas NC, Singh V (2014) Effect of hot corrosion on low cycle fatigue behavior of superalloy IN718. Int J Fatigue 59:272–28110.1016/j.ijfatigue.2013.08.009 ↗
22. Dang HY, Liang AR, Feng R, Zhang JZ, Xin Y, Shao YB (2022) Experimental study on mechanical properties and low-cycle fatigue behaviour of stainless steels subjected to salt spray and dry/wet cycle. Int J Fatigue 165:10718710.1016/j.ijfatigue.2022.107187 ↗
23. Zhang Y, Zheng KF, Zhu J, Ming L, Feng XY (2021) Research on corrosion and fatigue performance of weathering steel and high-performance steel for bridges. Constr Build Mater 289:12310810.1016/j.conbuildmat.2021.123108 ↗
24. Zhang YP, Guo J, Di YL, Guo WL, Huang YF, Dong LH (2024) Effect of fatigue and precorrosion fatigue on fatigue crack propagation and fracture failure behavior of 5B70 aluminum alloy. Adv Eng Mater 26(20):240117910.1002/adem.202401179 ↗
25. Lai JM, Huang ZC, Tang NL, Hu ZX, Jiang YQ (2022) Insight of salt spray corrosion on mechanical properties of TA1-Al5052 self-piercing riveted joint. Materials 15(23):864310.3390/ma15238643 ↗
26. Sun QQ, Han QY, Wang S, Xu R (2020) Microstructure, corrosion behaviour and thermal stability of AA 7150 after ultrasonic shot peening. Surf Coat Tech 398:12612710.1016/j.surfcoat.2020.126127 ↗
27. Qiao JZ, Fu XS, Gai PT, Chen GQ, Zhou WL (2022) Fatigue properties of aluminum alloy sheet treated with shot-peen forming in salt-spray environment. Coatings 12(9):123710.3390/coatings12091237 ↗
28. Qiao JZ, Zhang XW, Chen GQ, Zhou WL, Fu XS, Wang JW (2022) Effect of shot peen forming on corrosion-resistant of 2024 aluminum alloy in salt spray environment. Materials 15(23):858310.3390/ma15238583 ↗
29. Wang H, Ning CY, Huang YH, Cao ZY, Chen XX, Zhang WW (2017) Improvement of abrasion resistance in artificial seawater and corrosion resistance in NaCl solution of 7075 aluminum alloy processed by laser shock peening. Opt Laser Eng 90:179–18510.1016/j.optlaseng.2016.10.016 ↗
30. Bao L, Li K, Zheng JY, Zhang YL, Zhan K, Yang Z, Zhao B, Ji VC (2022) Surface characteristics and stress corrosion behavior of AA 7075–T6 aluminum alloys after different shot peening processes. Surf Coat Tech 440:12848110.1016/j.surfcoat.2022.128481 ↗
31. Rodrı́guez JJS, Hernandez FJS, González JEG (2003) The effect of environmental and meteorological variables on atmospheric corrosion of carbon steel, copper, zinc and aluminium in a limited geographic zone with different types of environment. Corros Sci 45(4):799–81510.1016/S0010-938X(02)00081-1 ↗
32. Qiao JZ, Fu XS, Gai PT, Chen GQ, Zhou WL (2023) Corrosion behavior and microstructure of 2024 aluminum alloy sheets by shot peen forming in a salt spray environment. J Mater Eng Perform 32(9):4124–413710.1007/s11665-022-07389-w ↗
33. Gu HQ, Yan P, Jiao L, Chen SQ, Song YF, Zou SK, Wang SB (2023) Effect of laser shock peening on boring hole surface integrity and conformal contact fretting fatigue life of Ti–6Al–4V alloy. Int J Fatigue 166:10724110.1016/j.ijfatigue.2022.107241 ↗
34. Tang Y, Li SW, Liao YF, Ma YD, Wu XY, Chi YQ, Lin CH, Zhang YK (2024) Improvement of fatigue life of Ti–6Al–4V alloy treated by double-sided symmetric oblique laser shock peening. Mater Today Commun 39(2024):10912110.1016/j.mtcomm.2024.109121 ↗
35. Blackwood DJ, Peter LM, Williams DE (1988) Stability and open circuit breakdown of the passive oxide film on titanium. Electrochim Acta 33(8):1143–114910.1016/0013-4686(88)80206-8 ↗
36. Karayan AI, Park SW, Lee EM (2008) Corrosion behavior of Ti–Ta–Nb alloys in simulated physiological media. Mater Lett 62(12–13):1843–184510.1016/j.matlet.2007.10.028 ↗
37. Liu XD, Frankel GS (2006) Effects of compressive stress on localized corrosion in AA2024-T3. Corros Sci 48(10):3309–332910.1016/j.corsci.2005.12.003 ↗
38. Fan KF, Liu DX, Yang J, Zhang XH, Liu D, Li MY, Xiang JF, Wang C, Wahab MA (2024) Thermal relaxation of compressive residual stresses in surface gradient nanostructure of TC11 titanium alloy. J Alloy Compd 970:17254910.1016/j.jallcom.2023.172549 ↗
39. Wen Y, Wu YY, Hua L, Xie LC, Wang LQ, Zhang LC, Lu WJ (2021) Effects of shot peening on microstructure evolution and mechanical properties of surface nanocrystal layer on titanium matrix composite. Mater Des 206:10976010.1016/j.matdes.2021.109760 ↗
40. Wang ZG, Wang Z, Sun K, Chen S, Zheng YF, Fang XY, Cai ZB (2025) Fretting fatigue damage and crack propagation of shot-peening dovetail joints assisted with the U-Net model. Int J Fatigue 199:10907410.1016/j.ijfatigue.2025.109074 ↗
41. Wang YZ, Zhang YP, Song GH, Niu WT, Xu ZC, Huang CX (2020) Effect of shot peening on fatigue crack propagation of Ti6Al4V. Mater Today Commun 25:10143010.1016/j.mtcomm.2020.101430 ↗
42. Verma VK, Naseem H, Raman SGS, Murthy H, Majila AN, Fernando DC (2017) Effect of contact pressure and stress ratio on the fretting fatigue behaviour of Ti-6Al-4V. Mater Sci Eng A 707:647–65610.1016/j.msea.2017.09.046 ↗
43. Zhang ZH, Fu XS, Cao ZW, Gai PT, Wei DS, Zhou WL, Zu YF, Chen GQ (2024) Crack failure behaviors of Ti–6Al–4V dovetail joints subjected to fretting fatigue and effect of laser shock dimple-textured surface coated with diamond-like carbon film. J Mater Res Technol 33:1984–199810.1016/j.jmrt.2024.09.169 ↗
44. Zou L, Zeng DF, Dong YH, Li J, Chen X, Zhao H, Lu LT (2023) Experimental and numerical study on the fretting wear-fatigue interaction evolution in press-fitted axles. Int J Fatigue 175:10779310.1016/j.ijfatigue.2023.107793 ↗
45. Sangral S, Jayaprakash M (2022) Evaluating the effect of contact pad geometry on the fretting fatigue behavior of titanium alloy by experimental and finite element analysis. J Fail Anal Prev 22(2):773–78410.1007/s11668-022-01369-x ↗
46. Zheng Y, Zeng W, Li D, Ma H, Zhang P, Ma X (2019) Quasi cleavage fracture of the bimodal size lamellar O phase microstructure of a Ti2AlNb based alloy. J Alloys Compd 799:267–27810.1016/j.jallcom.2019.05.157 ↗
47. Tianyu Y, Min D, Lu L, Lei L, Shouyi S, Chuanyun H (2023) Improving high temperature fretting fatigue performance of nickel-based single crystal superalloy by shot peening. Int J Fatigue 171:10756310.1016/j.ijfatigue.2023.107563 ↗
48. Zhou Y, Zhang QY, Liu JQ, Cui XH, Mo JG, Wang SQ (2015) Wear characteristics of a thermally oxidized and vacuum diffusion heat treated coating on Ti–6Al–4V alloy. Wear 344:9–2110.1016/j.wear.2015.10.015 ↗
49. Geng MR, He GY, Sun ZP, Chen J, Yang ZF, Li YQ (2018) Corrosion damage mechanism of TiN/ZrN nanoscale multilayer anti-erosion coating. Coatings 8(11):40010.3390/coatings8110400 ↗
50. Liu RD, Jiang SM, Yu HJ, Gong J, Sun C (2016) Preparation and hot corrosion behaviour of Pt modified AlSiY coating on a Ni-based superalloy. Corros Sci 104:162–17210.1016/j.corsci.2015.12.007 ↗