Continuous heating stabilization of laser-modified PAN fibers
Source abstract
Abstract
To address the challenges of temperature control and energy waste caused by stepped heating and multiple temperature zones during the pre-oxidation process of polyacrylonitrile-based carbon fibers, this study proposes a continuous heating pre-oxidation method using laser tilted irradiation. Pre-treatment with a 10.6 μm laser and continuous heating pre-oxidation with 976-nm laser tilted irradiation were employed. The pre-oxidation characteristics under different laser irradiation tilt angles were investigated using Raman spectroscopy (RS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), elemental analysis, and bulk density measurement. The results show that the fiber obtained under irradiation at a 20° laser tilt angle exhibits the smallest core-sheath structure, a Raman R value of 1.82, a pre-oxidation index (SI) of 99.57%, a cyclization rate of 69.67%, and an oxygen content of 9.84%. This indicates that the laser continuous heating pre-oxidation process can effectively suppress the formation of the core-sheath structure, and the prepared samples meet the standards of traditional pre-oxidized fibers (SF).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Advanced ceramic materials synthesis · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Zhao G, Liu J, Xu L, Guo S (2021) Study on structure evolution and reaction mechanism in microwave pre-oxidation. J Inorg Organomet Polym Mater 107:100575
2. Hayne DJ, Stojcevski F, Knorr DB, Tran NT, Henderson LC (2021) Surface modification of carbon fibers using ring-opening metathesis polymerization. Compos A: Appl Sci Manuf 145:10637410.1016/j.compositesa.2021.106374 ↗
3. Quan G, Wang Z, Zhou Y, Wang Y, Wang C (2024) Effect of temperature gradient on the chemical structure and physical morphology of polyacrylonitrile fibers during thermal stabilization process. Polym Degrad Stab 228:11092310.1016/j.polymdegradstab.2024.110923 ↗
4. Miao P, Wu D, Zeng K, Xu G, Zhao C, Yang G (2010) Influence of electron beam pre-irradiation on the thermal behaviors of polyacrylonitrile. Polym Degrad Stabil 95:1665–167110.1016/j.polymdegradstab.2010.05.028 ↗
5. Jang D, Lee ME, Choi J, Cho SY, Lee S (2022) Strategies for the production of PAN-Based carbon fibers with high tensile strength. Carbon 186:644–67710.1016/j.carbon.2021.10.061 ↗
6. Kim SY, Kim S, Choi J, Lee S, Jo SM, Joo J et al (2015) Two step microwave plasma carbonization including low plasma power pre-carbonization for poly-acrylonitrile based carbon fiber. Polymer 69:123–12810.1016/j.polymer.2015.05.040 ↗
7. Soulis S, Konstantopoulos G, Koumoulos EP, Charitidis CA (2020) Impact of alternative stabilization strategies for the production of PAN-based carbon fibers with high performance. Fibers 8(6):3310.3390/fib8060033 ↗
8. Zhao R, Zhao X, Gao Z, Liu X, Che X (2017) Influence of thermal temperature on the structure and sealed micropores of stabilized polyacrylonitrile fibers. Chem Res Chin Univ 33:312–31710.1007/s40242-017-6262-3 ↗
9. Zhao RX, Sun PF, Liu RJ, Ding ZH, Li XS, Liu XY, Sun P, Liu R, Ding Z, Li X, Liu X, Zhao X, Gao Z, Gao ZM (2018) Influence of heating procedures on the surface structure of stabilized polyacrylonitrile fibers. Appl Surf Sci 433:321–32810.1016/j.apsusc.2017.09.252 ↗
10. Liu J, Xiao S, Shen Z et al (2018) Study on the oxidative stabilization of polyacrylonitrile fibers by microwave heating. Polym Degrad Stabil 150:86–9110.1016/j.polymdegradstab.2018.02.017 ↗
11. Elagib THH, Hassan EAM, Fan C, Han K, Yu M (2019) Microwave pre-oxidation for polyacrylonitrile precursor coated with nano-carbon black. Polym Eng Sci 59(3):457–46410.1002/pen.24943 ↗
12. Hsu HC, Chao HW, Huang WC et al (2024) Stabilization of polyacrylonitrile-based fiberwith a quasi-traveling microwave applicator. Sci Rep 14(1):1871810.1038/s41598-024-69641-8 ↗
13. Houzumi S, Takeshima K, Mochiji K, Toyoda N, Yamada I (2008) Low-energy irradiation effects of gas cluster ion beams. Electron Commun Jpn 91:40–4510.1002/ecj.10031 ↗
14. Kumar R, Sahoo S, Joanni E, Singh RK, Tan WK, Kar KK, Matsuda A (2021) Recent progress on carbon-based composite materials for microwave electromagnetic interference shielding. Carbon 177:304–33110.1016/j.carbon.2021.02.091 ↗
15. Kim S, Lee S, Park S, Jo SM, Lee H, Joh H (2015) Continuous andrapid stabilization of polyacrylonitrile fiber bundles assisted by atmospheric pressure plasma for fabricating large-tow carbon fibers. Carbon 94:412–41610.1016/j.carbon.2015.07.012 ↗
16. Chen G, Wang Y, Zhang J, Bi J (2017) An analytical solution for two-dimensional modeling of repetitive long pulse laser heating material. Int J Heat Mass Transf 104:503–50910.1016/j.ijheatmasstransfer.2016.08.079 ↗
17. Terra BM, de Andra DA, de Mesquita RN (2021) Characterization of polyacrylonitrile thermal stabilization process for carbon fiber production using intelligent algorithms. Polym Test 100:10723810.1016/j.polymertesting.2021.107238 ↗
18. Sugioka K (2017) Progress in ultrafast laser processing and future prospects. J Nanophotonics 6(2):393–41310.1515/nanoph-2016-0004 ↗
19. Dittrich S, Spellauge M, Barcikowski S, Huber HP, Gökce B (2022) Timeresolved studies reveal the origin of the unparalleled high efficiency of one nanosecond laser ablation in liquids. Opto-Electron Adv 5:21005310.29026/oea.2022.210053 ↗
20. Nagimova A, Perveen A (2019) A review on laser machining of hard to cut materials. Mater Today Proc 18:2440–244710.1016/j.matpr.2019.07.092 ↗
21. Evdokimov A, Jasiewicz F, Doynov N, Ossenbrink R, Michailov V (2022) Simulation of surface heat treatment with inclined laser beam. J Manuf Process 81:107–11410.1016/j.jmapro.2022.06.051 ↗
22. Porkodi P, Abhilash JK, Shukla HK (2022) On the structural changes, mechanism and kinetics of stabilization of lignin blended polyacrylonitrile copolymer fiber. J Polym Res 29(10):43610.1007/s10965-022-03278-x ↗
23. Wang Y, Yin WY (2011) Chemical modification for PAN fibers during heat-treatment process. Phys Proced 18:202–20510.1016/j.phpro.2011.06.081 ↗