Synergistic enhancement in wear resistance of AISI 321 austenitic stainless steel by laser surface texturing and double glow plasma surface alloying using a Ni–Ti target with an atomic ratio of 1:2
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (94)
Show source-provided references
1. Rasool G, Stack MM (2014) Wear maps for TiC composite-based coatings deposited on 303 stainless steel. Tribol Int 74:93–102. https://doi.org/10.1016/j.triboint.2014.02.00210.1016/j.triboint.2014.02.002 ↗
2. Nie MH, Jiang PF, Zhou YX et al (2023) Studies on the 316/NiTi functionally gradient ultra-thick coatings fabricated with directed energy deposition: microstructure, crystallography, and wear mechanism. Appl Surf Sci 630:157497. https://doi.org/10.1016/j.apsusc.2023.15749710.1016/j.apsusc.2023.157497 ↗
3. Dearnley PA, Mallia B (2013) The chemical wear (corrosion-wear) of novel Cr based hard coated 316L austenitic stainless steels in aqueous saline solution. Wear 306(1–2):263–275. https://doi.org/10.1016/j.wear.2012.09.00210.1016/j.wear.2012.09.002 ↗
4. Chang CL, Hsu MT, Lin HK et al (2023) Effects of metal film coatings on surface properties of laser-textured stainless steel. Surf Coat Technol 461:129446. https://doi.org/10.1016/j.surfcoat.2023.12944610.1016/j.surfcoat.2023.129446 ↗
5. Lepule ML, Obadele BA, Andrew A et al (2015) Corrosion and wear behaviour of ZrO2 modified NiTi coatings on AISI 316 stainless steel. Surf Coat Technol 261:21–27. https://doi.org/10.1016/j.surfcoat.2014.11.07210.1016/j.surfcoat.2014.11.072 ↗
6. Bansal DG, Eryilmaz OL, Blau PJ (2011) Surface engineering to improve the durability and lubricity of Ti–6Al–4V alloy. Wear 271(9–10):2006–2015. https://doi.org/10.1016/j.wear.2010.11.02110.1016/j.wear.2010.11.021 ↗
7. Fazel M, Salimijazi HR, Golozar MA et al (2015) A comparison of corrosion, tribocorrosion, and electrochemical impedance properties of pure Ti and Ti6Al4V alloy treated by micro-arc oxidation process. Appl Surf Sci 324:751–756. https://doi.org/10.1016/j.apsusc.2014.11.03010.1016/j.apsusc.2014.11.030 ↗
8. Siddaiah A, Mao B, Liao Y et al (2018) Surface characterization and tribological performance of laser shock peened steel surfaces. Surf Coat Technol 351:188–197. https://doi.org/10.1016/j.surfcoat.2018.07.08710.1016/j.surfcoat.2018.07.087 ↗
9. Montemor MF (2014) Functional and smart coatings for corrosion protection: a review of recent advances. Surf Coat Technol 258:17–37. https://doi.org/10.1016/j.surfcoat.2014.06.03110.1016/j.surfcoat.2014.06.031 ↗
10. Hogmark S, Jacobson S, Larsson M (2000) Design and evaluation of tribological coatings. Wear 246(1–2):20–33. https://doi.org/10.1016/S0043-1648(00)00505-610.1016/S0043-1648(00)00505-6 ↗
11. Yuan S, Lin N, Zeng Q et al (2020) Recent developments in research of double glow plasma surface alloying technology: a brief review. J Mater Res Technol 9(3):6859–6882. https://doi.org/10.1016/j.jmrt.2020.03.12310.1016/j.jmrt.2020.03.123 ↗
12. Xu Z, Huang J, Wu H et al (2022) A modern-day alchemy: double glow plasma surface metallurgy technology. AIP Adv 12(3):030702. https://doi.org/10.1063/5.008080810.1063/5.0080808 ↗
13. Ma J, Liu Y, Mostaghimi J et al (2024) Effect of laser preparation strategy on surface wettability and tribological properties under starved lubrication. Tribol Int 191:109107. https://doi.org/10.1016/j.triboint.2023.10910710.1016/j.triboint.2023.109107 ↗
14. Rosenkranz A, Grützmacher PG, Gachot C et al (2019) Surface texturing in machine elements—a critical discussion for rolling and sliding contacts. Adv Eng Mater. https://doi.org/10.1002/adem.20190019410.1002/adem.201900194 ↗
15. Wang Z, Ye R, Xiang J (2023) The performance of textured surface in friction reduction: a review. Tribol Int 177:108010. https://doi.org/10.1016/j.triboint.2022.10801010.1016/j.triboint.2022.108010 ↗
16. Meng R, Deng J, Duan R et al (2019) Modifying tribological performances of AISI 316 stainless steel surfaces by laser surface texturing and various solid lubricants. Opt Laser Technol 109:401–411. https://doi.org/10.1016/j.optlastec.2018.08.02010.1016/j.optlastec.2018.08.020 ↗
17. Rosenkranz A, Costa HL, Baykara MZ et al (2021) Synergetic effects of surface texturing and solid lubricants to tailor friction and wear - a review. Tribol Int 155:106792. https://doi.org/10.1016/j.triboint.2020.10679210.1016/j.triboint.2020.106792 ↗
18. Costa HL, Profto FJ, Zhang X et al (2022) Optimizing the surface of manufactured components for friction, adhesion, and convective heat transfer. MRS Bull 47(12):1247–1259. https://doi.org/10.1557/s43577-022-00467-310.1557/s43577-022-00467-3 ↗
19. Li B, Li P, Zhou R et al (2022) Contact mechanics in tribological and contact damage-related problems: a review. Tribol Int 171:107534. https://doi.org/10.1016/j.triboint.2022.10753410.1016/j.triboint.2022.107534 ↗
20. Vlădescu SC, Olver AV, Pegg IG et al (2016) Combined friction and wear reduction in a reciprocating contact through laser surface texturing. Wear 358–359:51–61. https://doi.org/10.1016/j.wear.2016.03.03510.1016/j.wear.2016.03.035 ↗
21. Karamimoghadam M, Rezayat M, Moradi M et al (2024) Laser surface transformation hardening for automotive metals: recent progress. Metals 14(3):339. https://doi.org/10.3390/met1403033910.3390/met14030339 ↗
22. Rezayat M, Morales M, Moradi M et al (2025) Influence of laser heat input on the corrosion mitigation of laser textured AISI 301LN steel in molten carbonate salts. Opt Laser Technol 186:112692. https://doi.org/10.1016/j.optlastec.2025.11269210.1016/j.optlastec.2025.112692 ↗
23. Rezayat M, Mateo A, Roa JJ (2023) Exploring the effects of laser surface modification on AISI 301LN steel: a micro-mechanical study. J Manuf Mater Process 7(6):191. https://doi.org/10.3390/jmmp706019110.3390/jmmp7060191 ↗
24. Bao Y, Deng J, Cao S et al (2024) High temperature wear performance of in-situ forming textured Ni60/WC/h-BN composite coatings based on laser micro-cladding. J Mater Res Technol 33:3470–3481. https://doi.org/10.1016/j.jmrt.2024.10.06710.1016/j.jmrt.2024.10.067 ↗
25. Li X, Deng J, Zhang L et al (2019) Effect of surface textures and electrohydrodynamically atomized WS2 films on the friction and wear properties of ZrO2 coatings. Ceram Int 45(1):1020–1030. https://doi.org/10.1016/j.ceramint.2018.09.28110.1016/j.ceramint.2018.09.281 ↗
26. Hu T, Hu L (2011) Tribological properties of lubricating films on the Al–Si alloy surface via laser surface texturing. Tribol Trans 54(5):800–805. https://doi.org/10.1080/10402004.2011.60476110.1080/10402004.2011.604761 ↗
27. Shum PW, Zhou ZF, Li KY (2014) Friction and wear reduction of hard TiAlSiN coatings by an integrated approach of laser surface texturing and high-energy ion implantation. Surf Coat Technol 259:136–140. https://doi.org/10.1016/j.surfcoat.2014.02.04210.1016/j.surfcoat.2014.02.042 ↗
28. Higuera Garrido A, González R, Cadenas M et al (2011) Tribological behavior of laser-textured NiCrBSi coatings. Wear 271(5–6):925–933. https://doi.org/10.1016/j.wear.2011.03.02710.1016/j.wear.2011.03.027 ↗
29. Zhang D, Li Z, Wang L et al (2021) Study on tribological properties of boronized and textured composite surface and its application on camshaft connecting-rod type hydraulic motor. Wear 482–483:203964. https://doi.org/10.1016/j.wear.2021.20396410.1016/j.wear.2021.203964 ↗
30. Dong B, Guo X, Zhang K et al (2022) Combined effect of laser texturing and carburizing on the bonding strength of DLC coatings deposited on medical titanium alloy. Surf Coat Technol 429:127951. https://doi.org/10.1016/j.surfcoat.2021.12795110.1016/j.surfcoat.2021.127951 ↗
31. Tang W, Zhou Y, Zhu H et al (2013) The effect of surface texturing on reducing the friction and wear of steel under lubricated sliding contact. Appl Surf Sci 273:199–204. https://doi.org/10.1016/j.apsusc.2013.02.01310.1016/j.apsusc.2013.02.013 ↗
32. Yan K, Lin N, Wang Z et al (2023) Finite element simulation of wear behavior of groove-textured rocket sled slider. China Surf Eng 36(5):190–202
33. Convert L, Bourillot E, François M et al (2022) Laser textured titanium surface characterization. Appl Surf Sci 586:152807. https://doi.org/10.1016/j.apsusc.2022.15280710.1016/j.apsusc.2022.152807 ↗
34. Kumar V, Verma R, Kango S et al (2021) Recent progresses and applications in laser-based surface texturing systems. Mater Today Commun 26:101736. https://doi.org/10.1016/j.mtcomm.2020.10173610.1016/j.mtcomm.2020.101736 ↗
35. Xu J, Xie X, Xu Z (2001) Depletion of alloying elements and composition demixing in surface layers by double glow plasma method. J Univ Sci Technol Beijing 23(06):532–534
36. Duan X, Li W, Qin E et al (2021) Shape memory effect of NiTi alloy coating deposited by high-velocity oxygen-fuel sprayin. Heat Treat Met 46(04):176–181
37. Zhang J, Zhou Y, Li J (2013) Effect of heat treatment on erosive properties of Ni–Ti coating prepared by arc spraying. Hot Working Technol 42(06):196–200
38. Cui S, Miao Q, Liang W et al (2018) Oxidation behavior of NiCoCrAlY coatings deposited by double-Glow plasma alloying. Appl Surf Sci 428:781–787. https://doi.org/10.1016/j.apsusc.2017.09.21510.1016/j.apsusc.2017.09.215 ↗
39. Yan W (2006) Theoretical investigation of wear-resistance mechanism of superelastic shape memory alloy NiTi. Mater Sci Eng A 427(1–2):348–355. https://doi.org/10.1016/j.msea.2006.05.00510.1016/j.msea.2006.05.005 ↗
40. Zhu J, Zeng Q, Fu T (2019) An updated review on TiNi alloy for biomedical applications. Corros Rev 37(6):539–552. https://doi.org/10.1515/corrrev-2018-010410.1515/corrrev-2018-0104 ↗
41. Chluba C, Ge W, de Miranda RL et al (2015) Ultralow-fatigue shape memory alloy films. Science 348:1004–1007. https://doi.org/10.1126/science.126116410.1126/science.1261164 ↗
42. Cameron N, Farhat Z (2019) Investigation into the wear and dent resistance of Ni/Ti nanolaminates and superelastic NiTi coating. J Mater Eng Perform 28:6033–6041. https://doi.org/10.1007/s11665-019-04377-510.1007/s11665-019-04377-5 ↗
43. Feng Y, Du Z, Hu Z (2021) Study on the effect of Ni addition on the microstructure and properties of NiTi alloy coating on AISI 316 L prepared by laser cladding. Materials 14(16):4373. https://doi.org/10.3390/ma1416437310.3390/ma14164373 ↗
44. Wang J, Pan Z, Wang L et al (2020) In-situ dual wire arc additive manufacturing of NiTi-coating on Ti6Al4V alloys: microstructure characterization and mechanical properties. Surf Coat Technol 386:125439. https://doi.org/10.1016/j.surfcoat.2020.12543910.1016/j.surfcoat.2020.125439 ↗
45. Swain B, Mallick P, Bhuyan SK et al (2020) Mechanical properties of NiTi plasma spray coating. J Therm Spray Technol 29:741–755. https://doi.org/10.1007/s11666-020-01017-610.1007/s11666-020-01017-6 ↗
46. Chowdhury P, Sehitoglu H (2017) Deformation physics of shape memory alloys—fundamentals at atomistic frontier. Prog Mater Sci 88:49–88. https://doi.org/10.1007/s11666-020-01017-610.1007/s11666-020-01017-6 ↗
47. Kim WC, Lim KR, Kim WT et al (2021) Recent advances in multicomponent NiTi-based shape memory alloy using metallic glass as a precursor. Prog Mater Sci 118:100756. https://doi.org/10.1016/j.pmatsci.2020.10075610.1016/j.pmatsci.2020.100756 ↗
48. Zhang X, Rao X, Lv Y et al (2022) Effect of double glow plasma copper infiltration on the tribological properties of cylinder liner and piston ring. Lubric Eng 47(12):37–44. https://doi.org/10.3969/j.0254-0150.2022.12.00510.3969/j.0254-0150.2022.12.005 ↗
49. Xing Y, Deng J, Feng X et al (2013) Effect of laser surface texturing on Si3N4/TiC ceramic sliding against steel under dry friction. Mater Des (1980-2015) 52:234–245. https://doi.org/10.1016/j.matdes.2013.05.07710.1016/j.matdes.2013.05.077 ↗
50. Luo C, Zeng X, Wei D et al (2024) Preparation and high-temperature friction behavior of TiN coating on valve disc cone surface based on dual glow technology. Heat Treat Met 49(07):195–199. https://doi.org/10.13251/j.issn.0254-6051.2024.07.03010.13251/j.issn.0254-6051.2024.07.030 ↗
51. Luo XX, Yao ZJ, Zhang PZ et al (2015) Tribological behaviors of Fe–Al–Cr–Nb alloyed layer deposited on 45 steel via double glow plasma surface metallurgy technique. Trans Nonferrous Met Soc China 25(11):3694–3699. https://doi.org/10.1016/S1003-6326(15)64010-910.1016/S1003-6326(15)64010-9 ↗
52. Saric I, Peter R, Kavre I et al (2016) Oxidation of nickel surfaces by low energy ion bombardment. Nucl Instrum Methods Phys Res Sect B 371:286–289. https://doi.org/10.1016/j.nimb.2015.08.09010.1016/j.nimb.2015.08.090 ↗
53. Xing Y, Wang G, Zhang Y et al (2017) Development in plasma surface diffusion techniques of Ti–6Al–4V alloy: a review. Int J Adv Manuf Technol 92:1901–1912. https://doi.org/10.1007/s00170-017-0302-510.1007/s00170-017-0302-5 ↗
54. Yang J, Wang C, Zhang L et al (2023) Microstructure evolution and properties of Fe–Ni–Cr–Co–Mo–W high-entropy alloy coatings by plasma surface alloying technology. Surf Coat Technol 467:129732. https://doi.org/10.1016/j.surfcoat.2023.12973210.1016/j.surfcoat.2023.129732 ↗
55. Xu D, Qi Z, Li Y et al (1997) Preparation and structures of NiTi shape memory alloy thin films. Vacuum Sci Technol 5:311–314. https://doi.org/10.13922/j.cnki.cjovst.1997.05.00410.13922/j.cnki.cjovst.1997.05.004 ↗
56. Wu G, Yin Y, Zhang S et al (2023) Effect of laser texturing on the antiwear properties of micro-arc oxidation coating formed on Ti–6Al–4V. Surf Coat Technol 453:129114. https://doi.org/10.1016/j.surfcoat.2022.12911410.1016/j.surfcoat.2022.129114 ↗
57. Qiu ZK, Zhang PZ, Wei DB et al (2015) A study on tribological behavior of double-glow plasma surface alloying W-Mo coating on gear steel. Surf Coat Technol 278:92–98. https://doi.org/10.1016/j.surfcoat.2015.08.00310.1016/j.surfcoat.2015.08.003 ↗
58. Zhu X, Yao Z, Chen X et al (2022) Effects of cold rolling on the microstructure and corrosion resistance of the double-glow plasma Ni–Cr alloying layer on Q235 steel. Materials (Basel) 15(22):7882. https://doi.org/10.3390/ma1522788210.3390/ma15227882 ↗
59. Lin N, Zhang L, Zou J et al (2019) A combined surface treatment of surface texturing-double glow plasma surface titanizing on AISI 316 stainless steel to combat surface damage: comparative appraisals of corrosion resistance and wear resistance. Appl Surf Sci 493:747–765. https://doi.org/10.1016/j.apsusc.2019.06.02810.1016/j.apsusc.2019.06.028 ↗
60. Wang Y, Wang H, Jia Y et al (2022) Nano-mechanical properties of Mo coating prepared on Invar alloy substrate by double glow plasma surface alloying. Surf Coat Technol 447:128850. https://doi.org/10.1016/j.surfcoat.2022.12885010.1016/j.surfcoat.2022.128850 ↗
61. Li CX, Bell T (2004) Sliding wear properties of active screen plasma nitrided 316 austenitic stainless steel. Wear 256(11–12):1144–1152. https://doi.org/10.1016/j.wear.2003.07.00610.1016/j.wear.2003.07.006 ↗
62. Qiao J, Wu F, Yang Z et al (2024) The electronic structures, elastic and thermodynamic properties of alkali earth metal doped Ni3Ti intermetallics. Intermetallics 164:108123. https://doi.org/10.1016/j.intermet.2023.10812310.1016/j.intermet.2023.108123 ↗
63. Plummer G, Mendelev MI, Benafan O et al (2025) Interactions of austenite-martensite interfaces with Ni4Ti3 precipitates in NiTi shape memory alloy: a molecular dynamics investigation. Int J Plast 184:104203. https://doi.org/10.1016/j.ijplas.2024.10420310.1016/j.ijplas.2024.104203 ↗
64. Liu Y, Wang Q, Xie J et al (2022) Enhanced surface composite coating on Ti811 alloy by laser cladding towards improved nano-hardness. Ceram Int 48(13):18773–18783. https://doi.org/10.1016/j.ceramint.2022.03.15210.1016/j.ceramint.2022.03.152 ↗
65. Ding Z, Miao Q, Liang W et al (2020) Performance enhancement in borocarburized low-carbon steel by double glow plasma surface alloying. Coatings 10(12):1205. https://doi.org/10.3390/coatings1012120510.3390/coatings10121205 ↗
66. Qian LM, Xiao XD, Sun QP et al (2004) Anomalous relationship between hardness and wear properties of a superelastic nickel–titanium alloy. Appl Phys Lett 84(7):1076–1078. https://doi.org/10.1063/1.164621810.1063/1.1646218 ↗
67. Niu C, Han J, Hu S et al (2021) Surface modification and structure evolution of aluminum under argon ion bombardment. Appl Surf Sci 536:147819. https://doi.org/10.1016/j.apsusc.2020.14781910.1016/j.apsusc.2020.147819 ↗
68. Lu L, Zhang Z, Guan Y et al (2018) Comparison of the effect of typical patterns on friction and wear properties of chromium alloy prepared by laser surface texturing. Opt Laser Technol 106:272–279. https://doi.org/10.1016/j.optlastec.2018.04.02010.1016/j.optlastec.2018.04.020 ↗
69. Wang Q, Zhang PZ, Wei DB et al (2013) Microstructure and corrosion resistance of pure titanium surface modified by double-glow plasma surface alloying. Mater Des 49:1042–1047. https://doi.org/10.1016/j.matdes.2013.02.05410.1016/j.matdes.2013.02.054 ↗
70. Shao WT, Wu SK, Yang W et al (2023) Effect of modulation period on microstructure and mechanical properties of (AlSiTiVNbCr)N/(AlSiTiVNbCr)CN nano-multilayer films. Vacuum 207:111660. https://doi.org/10.1016/j.vacuum.2022.11166010.1016/j.vacuum.2022.111660 ↗
71. Wang KW, Lin NM, Chen SY, Zhao HC, Ma GZ, Shi QX (2025) Effect of bias voltage on structure, mechanical properties and tribological performance (against simulated lunar dust) of NiCrMoAl thin films deposited by DC magnetron sputtering. J Mater Res Technol 38:1898–1910. https://doi.org/10.1016/j.jmrt.2025.08.05310.1016/j.jmrt.2025.08.053 ↗
72. Lo WL, Hsu SY, Lin YC, Tsai SY, Lai YT, Duh JG (2020) Improvement of high entropy alloy nitride coatings (AlCrNbSiTiMo)N on mechanical and high temperature tribological properties by tuning substrate bias. Surf Coat Technol 401:126247. https://doi.org/10.1016/j.surfcoat.2020.12624710.1016/j.surfcoat.2020.126247 ↗
73. Lu J, Wang T, Ding X et al (2021) Tribological performance of friction pairs with different materials and bi-composite surface texture configurations. Appl Sci 11(11):4738. https://doi.org/10.3390/app1111473810.3390/app11114738 ↗
74. Wan Q, Gao P, Zhang Z (2021) Friction and wear performance of lubricated micro-textured surface formed by laser processing. Surf Eng 37(2):1–9. https://doi.org/10.1080/02670844.2021.195204110.1080/02670844.2021.1952041 ↗
75. Lin CM, Kai WY, Su CY et al (2017) Microstructure and mechanical properties of Ti–6Al–4V alloy diffused with molybdenum and nickel by double glow plasma surface alloying technique. J Alloys Compd 717:197–204. https://doi.org/10.1016/j.jallcom.2017.05.08710.1016/j.jallcom.2017.05.087 ↗
76. Gou S, Li SF, Hu H et al (2021) Surface hardening of CrCoFeNi high-entropy alloys via Al laser alloying. Mater Res Lett 9(10):437–444. https://doi.org/10.1080/21663831.2021.196852410.1080/21663831.2021.1968524 ↗
77. Yang K, Lv X, Dang B et al (2024) Microstructure and wear performance of TaC and Ta/TaC coatings on 30CrNi2MoVA steel. Coatings 14(8):1039. https://doi.org/10.3390/coatings1408103910.3390/coatings14081039 ↗
78. Long R, Pan Z, Jin Z et al (2021) Tribological behavior of grooves textured thrust cylindrical roller bearings under dry wear. Adv Mech Eng. https://doi.org/10.1177/1687814021106728410.1177/16878140211067284 ↗
79. Chen L, Lan Y, Cheng Y et al (2024) Friction behavior and wear mechanism of laser cladded FeNiCr-WC composite coatings in comparison with different friction pairs. J Mater Res Technol 31:1956–1973. https://doi.org/10.1016/j.jmrt.2024.06.20610.1016/j.jmrt.2024.06.206 ↗
80. Sarıkaya M, Gupta MK, Tomaz I et al (2021) A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys. CIRP J Manuf Sci Technol 35:624–658. https://doi.org/10.1016/j.cirpj.2021.08.00510.1016/j.cirpj.2021.08.005 ↗
81. Yi W, Xuan DS, Li JL (2010) Cooperative effect of surface alloying and laser texturing on tribological performance of lubricated surfaces. J Cent S Univ Technol 17(005):906–910. https://doi.org/10.1007/s11771-010-0575-410.1007/s11771-010-0575-4 ↗
82. Yang CM, Liu XB, Zhu ZX et al (2024) Study of tribological property of laser-cladded FeCoCrNiMnx high-entropy alloy coatings via experiment and molecular dynamics simulation. Tribol Int 191:109106. https://doi.org/10.1016/j.triboint.2023.10910610.1016/j.triboint.2023.109106 ↗
83. Li WX, Liu Y, Duan HT et al (2023) Effect of laser texturing bulges on tribological properties of 316L stainless steel. Surf Topogr Metrol Prop 11:01. https://doi.org/10.1088/2051-672X/acaff710.1088/2051-672X/acaff7 ↗
84. Zhang FZ, Liu XB, Chen GD et al (2026) Tribo-corrosion performance of laser cladding CuNiTiCrNb(h-BN)x high-entropy alloy coatings. Tribol Int 214:111190. https://doi.org/10.1016/j.triboint.2025.11119010.1016/j.triboint.2025.111190 ↗
85. Ma D, Zheng K, Hei H et al (2023) Tribological behavior of diamond particles reinforced hafnium matrix composite coatings on Ti6Al4V. Mater Chem Phys 295:127096. https://doi.org/10.1016/j.matchemphys.2022.12709610.1016/j.matchemphys.2022.127096 ↗
86. Nie MH, Jiang PF, Li XR et al (2024) Revealing the wear mechanism of NiTi alloy coatings with biomimetic sandwich structures by laser cladding. Tribol Int 194:109468. https://doi.org/10.1016/j.triboint.2024.10946810.1016/j.triboint.2024.109468 ↗
87. Nie MH, Jiang PF, Li XR et al (2006) Role of phase transition in the unusual microwear behavior of superelastic NiTi shape memory alloy. Wear 260(4–5):509–522. https://doi.org/10.1016/j.wear.2005.03.00610.1016/j.wear.2005.03.006 ↗
88. Mo YM, Yang B (2017) Study of wear resistance of 0Cr18Ni10Ti austenitic stainless steel. Foundry Technol 38(02):342–344. https://doi.org/10.16410/j.issn1000-8365.2017.02.02310.16410/j.issn1000-8365.2017.02.023 ↗
89. Chen C, Yang Z, Wang J et al (2024) Effects of Al addition and annealing on microstructure and properties of Ni–Ti coatings synthesized on SUS 316L stainless steel substrates using mechanical alloying method. J Mater Eng Perform. https://doi.org/10.1007/s11665-024-09378-710.1007/s11665-024-09378-7 ↗
90. Wang LB, Xing SL, Liu HB et al (2020) Improved wear properties of NiTi nanocomposite coating with tailored spatial microstructures by extra adding CeO2 nanoparticles. Surf Coat Technol 399:126119. https://doi.org/10.1016/j.surfcoat.2020.12611910.1016/j.surfcoat.2020.126119 ↗
91. Feng YQ, Du ZX, Hu ZF (2022) Influence of Ni content on microstructure and properties of NiTi alloy coatings fabricated by laser cladding. Chin J Lasers 49(08):238–249. https://doi.org/10.3788/CJL202249.080202210.3788/CJL202249.0802022 ↗
92. Yi YJ, Lou CH, Guo SR et al (2013) Microstructure and properties of Ni–Ti coating prepared by laser surface alloying. Appl Laser 33(02):99–103. https://doi.org/10.3788/AL20133302.09910.3788/AL20133302.099 ↗
93. Nie MH, Zhou YX, Jiang PF et al (2023) Achieving illustrious friction on a directed energy deposition 316/NiTi heterogeneous alloy with bionic Ni interlayer. Appl Surf Sci 638:158107. https://doi.org/10.1016/j.apsusc.2023.15810710.1016/j.apsusc.2023.158107 ↗
94. Nie MH, Jiang PF, Li XR et al (2024) Microstructure and tribological properties of laser directed energy deposited 316-NiTi heterogeneous bionic sandwich structure coatings. J Mater Res Technol 29:5090–5106. https://doi.org/10.1016/j.jmrt.2024.02.20810.1016/j.jmrt.2024.02.208 ↗