Effect of supercritical CO2-induced crystallization and porosity on the dielectric behavior of polycarbonate
Source abstract
Abstract
Polycarbonate (PC) is a promising candidate for use as a porous resin, but its heat resistance must be improved to broaden its applicability. Such improvement could be achieved by controlling the crystallinity and porosity of PC through foaming with a supercritical gas. This study investigated the effects of supercritical CO2 treatment on the crystallization, porosity formation, and thermal stability of PCs with varying complex viscosity. After treatment, all PC samples exhibited opacity, which was attributed to either induced crystallization or pore formation. Differential scanning calorimetry revealed the progression in crystallization, with the estimated crystallinity decreasing with complex viscosity. Microscopic analysis confirmed the changes in pore size and distribution depending on the complex viscosity, with lower-complex-viscosity samples forming larger pores. Density measurements indicated that the porosity formation-induced density reduction outweighed the density increase induced by crystallization. Thermal stability tests revealed pore retention up to 200 °C, highlighting the potential of porous PC materials processed with supercritical CO2 for thermal applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Foaming and Composites · Injection Molding Process and Properties · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Uchida T, Onishi Y, Goto A (2021) Preparation of highly porous heat‐resistant polybenzoxazole network films and their electrical conductivities. Polym Adv Technol 33:104. https://doi.org/10.1002/pat.549410.1002/pat.5494 ↗
2. Mohamed MG, El-Mahdy AFM, Kotp MG, Kuo S-W (2022) Advances in porous organic polymers: Syntheses, structures, and diverse applications. Mater Adv 3:707. https://doi.org/10.1039/d1ma00771h10.1039/d1ma00771h ↗
3. Wu D, Xu F, Sun B, Fu R, He H, Matyjaszewski K (2012) Design and preparation of porous polymers. Chem Rev 112:3959. https://doi.org/10.1021/cr200440z10.1021/cr200440z ↗
4. Di Maio E, Kiran E (2018) Foaming of polymers with supercritical fluids and perspectives on the current knowledge gaps and challenges. J Supercrit Fluids 134:157. https://doi.org/10.1016/j.supflu.2017.11.01310.1016/j.supflu.2017.11.013 ↗
5. Sun Y, Matsumoto M, Haruki M, Kihara S-i, Takishima S (2016) Molecular weight dependence of the crystallization of the polycarbonate induced by supercritical CO2. J Supercrit Fluids 113:144. https://doi.org/10.1016/j.supflu.2016.03.02510.1016/j.supflu.2016.03.025 ↗
6. Hwang DK, Lee HS, Kim HJ, Shul YG, Oh K (2013) Crystallization of polycarbonate in solvent/nonsolvent system and its application to high‐density polyethylene composite as a filler. Polym Eng Sci 54:1893. https://doi.org/10.1002/pen.2374010.1002/pen.23740 ↗
7. Matsuyama K, Aso M, Matsuda Y, Tasaka S (2020) Crystallization behavior of bisphenol-A polycarbonate on nanoparticle surface. J Fiber Sci Technol 76:113. https://doi.org/10.2115/fiberst.2020-001110.2115/fiberst.2020-0011 ↗
8. Wang X, Sun Y, Hu J et al (2023) The study of crystallization behavior, microcellular structure and thermal properties of glass-fiber/polycarbonate composites. Polymers 15:1546. https://doi.org/10.3390/polym1506154610.3390/polym15061546 ↗
9. Zhang X-X, Yang S-G, Zhong G-J et al (2021) Rapid melt crystallization of bisphenol-A polycarbonate jointly induced by pressure and flow. Macromolecules 54:2383. https://doi.org/10.1021/acs.macromol.0c0220810.1021/acs.macromol.0c02208 ↗
10. Sun Y, Matsumoto M, Kitashima K, Haruki M, Kihara S-i, Takishima S (2014) Solubility and diffusion coefficient of supercritical-CO2 in polycarbonate and CO2 induced crystallization of polycarbonate. J Supercrit Fluids 95:35. https://doi.org/10.1016/j.supflu.2014.07.01810.1016/j.supflu.2014.07.018 ↗
11. Lan Q, Yu J, Zhang J, He J (2011) Enhanced crystallization of bisphenol A polycarbonate in thin and ultrathin films by supercritical carbon dioxide. Macromolecules 44:5743. https://doi.org/10.1021/ma102797r10.1021/ma102797r ↗
12. Beckman E, Porter RS (1987) Crystallization of bisphenol a polycarbonate induced by supercritical carbon dioxide. J Polym Sci Part B: Polym Phys 25:1511. https://doi.org/10.1002/polb.1987.09025071310.1002/polb.1987.090250713 ↗
13. Mochizuki H, Mizokuro T, Tanigaki N, Hiraga T, Tanaka N (2003) Crystallization of bisphenol-A polycarbonate by using vapor transportation methods. Polym J 35:535. https://doi.org/10.1295/polymj.35.53510.1295/polymj.35.535 ↗
14. Ji G, Xue G, Ma J, Dong C, Gu X (1996) Crystallization of bisphenol-A polycarbonate by using vapor transportation methods. Polymer 37:3255. https://doi.org/10.1016/0032-3861(96)88470-910.1016/0032-3861(96)88470-9 ↗
15. Monnereau L, Urbanczyk L, Thomassin J-M et al (2014) Supercritical CO2 and polycarbonate based nanocomposites: a critical issue for foaming. Polymer 55:2422. https://doi.org/10.1016/j.polymer.2014.03.03510.1016/j.polymer.2014.03.035 ↗
16. Grebowicz JS (1996) Thermal properties of polycarbonate grade bisphenol A. J Therm Anal 46:1151. https://doi.org/10.1007/BF0198362610.1007/BF01983626 ↗
17. Katsumata R, Ata S, Kuboyama K, Ougizawa T (2013) Evaporation rate effect on starting point of shrinkage stress development during drying process in solvent cast polymer film. J Appl Polym Sci 128:60. https://doi.org/10.1002/app.3813210.1002/app.38132 ↗
18. Condo PD, Paul DR, Johnston KP (1994) Glass transitions of polymers with compressed fluid diluents: type II and III behavior. Macromolecules 27:365. https://doi.org/10.1021/ma00080a00810.1021/ma00080a008 ↗
19. Chang X, Ding T, Tian H, Wang T (2016) Antisolvent crystallization and solid‐state polymerization of bisphenol‐A polycarbonate. J Appl Polym Sci 43637. https://doi.org/10.1002/app.4363610.1002/app.43636 ↗
20. Jiang Q, Bismarck A (2021) A perspective: Is viscosity the key to open the next door for foam templating? React Funct Polym 162:104877. https://doi.org/10.1016/j.reactfunctpolym.2021.10487710.1016/j.reactfunctpolym.2021.104877 ↗
21. Nguyen C (2000) Analysis Methods for RF, Microwave, and Millimeter-Wave Planar Transmission Line Structures, JOHN WILEY & SONS, INC., 2000, p71–74,10.1002/0471200670 ↗
22. Wu G, Xie P, Yang H et al (2021) A review of thermoplastic polymer foams for functional applications. J Mater Sci 56:11579. https://doi.org/10.1007/s10853-021-06034-610.1007/s10853-021-06034-6 ↗
23. Ata S, Ono T, Tsuruta A et al (2023) Effect of the alumina particle filler structure and particle size on the dielectric constant and dielectric loss in the millimeter-wave band. ACS Omega 8:9379. https://doi.org/10.1021/acsomega.2c0801110.1021/acsomega.2c08011 ↗