Porous Si3N4 ceramics with high-performance thermal insulation and dielectric properties via gel casting and using pore-forming agents
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Aerogels and thermal insulation · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Jiang G-P, Yang J-F, Gao J-Q, Niihara K (2009) Characterization of porous silicon nitride ceramics using bentonite as binder and sintering additive. Mater Charact 60:456–460. https://doi.org/10.1016/j.matchar.2008.11.01610.1016/j.matchar.2008.11.016 ↗
2. Riley FL (2000) Silicon Nitride and Related Materials. J Am Ceram Soc 83:245–265. https://doi.org/10.1111/j.1151-2916.2000.tb01182.x10.1111/j.1151-2916.2000.tb01182.x ↗
3. Krstic Z, Krstic VD (2012) Silicon nitride: the engineering material of the future. J Mater Sci 47:535–552. https://doi.org/10.1007/s10853-011-5942-510.1007/s10853-011-5942-5 ↗
4. Mazzocchi M, Gardini D, Traverso PL, Faga MG, Bellosi A (2008) On the possibility of silicon nitride as a ceramic for structural orthopaedic implants. Part part II: chemical stability and wear resistance in body environment. J Mater Sci Mater Med 19:2889–2901. https://doi.org/10.1007/s10856-008-3437-y10.1007/s10856-008-3437-y ↗
5. Neumann A, Reske T, Held M, Jahnke K, Ragoß C, Maier HR (2004) Comparative investigation of the biocompatibility of various silicon nitride ceramic qualities in vitro. J Mater Sci Mater Med 15:1135–1140. https://doi.org/10.1023/B:JMSM.0000046396.14073.9210.1023/B:JMSM.0000046396.14073.92 ↗
6. Klemm H, Pezzotti G (1994) Fracture Toughness and Time-Dependent Strength Behavior of Low-Doped Silicon Nitrides for Applications at 1400°C. J Am Ceram Soc 77:553–561. https://doi.org/10.1111/j.1151-2916.1994.tb07029.x10.1111/j.1151-2916.1994.tb07029.x ↗
7. Zhao Z, Li X, Su D, Meng Q, Wu M, Ji H (2016) Microstructure and properties of pressureless-sintered porous Si3N4 using PMMA as pore-forming agent. Integr Ferroelectr 171:46–51. https://doi.org/10.1080/10584587.2016.117119310.1080/10584587.2016.1171193 ↗
8. Yang H, Ye F, Liu Q, Liu S, Gao Y, Liu L (2015) A novel silica aerogel/porous Si3N4 composite prepared by freeze casting and sol-gel impregnation with high-performance thermal insulation and wave-transparent. Mater Lett 138:135–138. https://doi.org/10.1016/j.matlet.2014.10.01210.1016/j.matlet.2014.10.012 ↗
9. Fünfschilling S, Fett T, Hoffmann MJ, Oberacker R, Schwind T, Wippler J, Böhlke T, Özcoban H, Schneider GA, Becher PF, Kruzic JJ (2011) Mechanisms of toughening in silicon nitrides: the roles of crack bridging and microstructure. Acta Mater 59:3978–3989. https://doi.org/10.1016/j.actamat.2011.03.02310.1016/j.actamat.2011.03.023 ↗
10. Yang J-F, Beppu Y, Zhang G-J, Ohji T, Kanzaki S (2002) Synthesis and properties of porous single-phase β′-SiAlON ceramics. J Am Ceram Soc 85:1879–1881. https://doi.org/10.1111/j.1151-2916.2002.tb00370.x10.1111/j.1151-2916.2002.tb00370.x ↗
11. Kawai C, Matsuura T, Yamakawa A (1999) Separation–permeation performance of porous Si3N4 ceramics composed of columnar β-Si3N4 grains as membrane filters for microfiltration. J Mater Sci 34:893–896. https://doi.org/10.1023/A:100453220073510.1023/A:1004532200735 ↗
12. Hirao K, Watari K, Brito ME, Toriyama M, Kanzaki S (1996) High thermal conductivity in silicon nitride with anisotropie microstructure. J Am Ceram Soc 79:2485–2488. https://doi.org/10.1111/j.1151-2916.1996.tb09002.x10.1111/j.1151-2916.1996.tb09002.x ↗
13. Xia L, Yang Y, Zhang X, Zhang J, Zhong B, Zhang T, Wang H, Wen G (2018) Crystal structure and wave-transparent properties of lithium aluminum silicate glass-ceramics. Ceram Int 44:14896–14900. https://doi.org/10.1016/j.ceramint.2018.04.20210.1016/j.ceramint.2018.04.202 ↗
14. Yang J-F, Deng Z-Y, Ohji T (2003) Fabrication and characterisation of porous silicon nitride ceramics using Yb2O3 as sintering additive. J Eur Ceram Soc 23:371–378. https://doi.org/10.1016/S0955-2219(02)00175-910.1016/S0955-2219(02)00175-9 ↗
15. Yang J-F, Shan S-Y, Janssen R, Schneider G, Ohji T, Kanzaki S (2005) Synthesis of fibrous β-Si3N4 structured porous ceramics using carbothermal nitridation of silica. Acta Mater 53:2981–2990. https://doi.org/10.1016/j.actamat.2005.03.01110.1016/j.actamat.2005.03.011 ↗
16. Fukasawa T, Deng Z-Y, Ando M, Ohji T, Kanzaki S (2002) Synthesis of porous silicon nitride with unidirectionally aligned channels using freeze-drying process. J Am Ceram Soc 85:2151–2155. https://doi.org/10.1111/j.1151-2916.2002.tb00426.x10.1111/j.1151-2916.2002.tb00426.x ↗
17. Topateş G, Petasch U, Adler J, Kara F, Mandal H (2013) Production and permeability of porous Si3N4 ceramics produced by starch addition. J Asian Ceram Soc 1:257–261. https://doi.org/10.1016/j.jascer.2013.06.00210.1016/j.jascer.2013.06.002 ↗
18. Wang S, Jia D, Cui W, Yang Z, Duan X, Shao Y, Zhou Y (2013) Effect of starting PMMA content on microstructure and properties of gel casting BN/Si3N4 ceramics with spherical-shaped pore structures. J Mater Sci 48:7974–7980. https://doi.org/10.1007/s10853-013-7608-y10.1007/s10853-013-7608-y ↗
19. Alem A, Drew RAL, Pugh MD (2014) The influence of the nitriding parameters on the microstructure and strength of the open-cell reaction bonded silicon nitride foams fabricated via wet processing. J Mater Sci 49:4780–4789. https://doi.org/10.1007/s10853-014-8177-410.1007/s10853-014-8177-4 ↗
20. Zeng T, Dong X, Mao C, Zhou Z, Yang H (2007) Effects of pore shape and porosity on the properties of porous PZT 95/5 ceramics. J Eur Ceram Soc 27:2025–2029. https://doi.org/10.1016/j.jeurceramsoc.2006.05.10210.1016/j.jeurceramsoc.2006.05.102 ↗
21. Uhlířová T, Gregorová E, Pabst W, Nečina V (2015) Preparation of cellular alumina ceramics via biological foaming with yeast and its microstructural characterization via stereological relations. J Eur Ceram Soc 35:187–196. https://doi.org/10.1016/j.jeurceramsoc.2014.08.02010.1016/j.jeurceramsoc.2014.08.020 ↗
22. Ozgür Engin N, Tas AC (1999) Manufacture of macroporous calcium hydroxyapatite bioceramics. J Eur Ceram Soc 19:2569–2572. https://doi.org/10.1016/S0955-2219(99)00131-410.1016/S0955-2219(99)00131-4 ↗
23. Ebrahimpour O, Dubois C, Chaouki J (2014) Fabrication of mullite-bonded porous SiC ceramics via a sol–gel assisted in situ reaction bonding. J Eur Ceram Soc 34:237–247. https://doi.org/10.1016/j.jeurceramsoc.2013.08.02810.1016/j.jeurceramsoc.2013.08.028 ↗
24. Janney MA, Omatete OO, Walls CA, Nunn SD, Ogle RJ, Westmoreland G (1998) Development of low-toxicity gelcasting systems. J Am Ceram Soc 81:581–591. https://doi.org/10.1111/j.1151-2916.1998.tb02377.x10.1111/j.1151-2916.1998.tb02377.x ↗
25. Wang F, Gu H, Yin J, Yao D, Xia Y, Zuo K, Liang H, Ning C, Zeng Y (2017) Porous Si3N4 ceramics fabricated through a modified incomplete gelcasting and freeze-drying method. Ceram Int 43:14678–14682. https://doi.org/10.1016/j.ceramint.2017.07.19410.1016/j.ceramint.2017.07.194 ↗
26. Zhang X, Li B, Ye J, Sun J (2014) The Dynamics Model Analysis of Drying Process in Gelcasting Method. Advanced Materials Research 1025–1026:366–371. https://doi.org/10.4028/www.scientific.net/AMR.1025-1026.36610.4028/www.scientific.net/AMR.1025-1026.366 ↗
27. Chen N, Cheng L, Liu Y, Ye F, Li M, Gao Z, Zhang L (2018) Microstructure and properties of SiCw/SiC composites prepared by gel-casting combined with precursor infiltration and pyrolysis. Ceram Int 44:969–979. https://doi.org/10.1016/j.ceramint.2017.10.03110.1016/j.ceramint.2017.10.031 ↗
28. Yin S, Jiang S, Pan L, Guo L, Zhang Z, Zhang J, Li X, Qiu T, Yang J (2019) Effects of solid loading and calcination temperature on microstructure and properties of porous Si3N4 ceramics by aqueous gelcasting using DMAA system. Ceram Int 45:19925–19933. https://doi.org/10.1016/j.ceramint.2019.06.25010.1016/j.ceramint.2019.06.250 ↗
29. Marsico CA, Orlicki JA, Blair VL (2020) Investigation of room-temperature super-stabilized suspension casting system mechanism. J Am Ceram Soc 103:1514–1519. https://doi.org/10.1111/jace.1688410.1111/jace.16884 ↗
30. Colonetti VC, Sanches MF, de Souza VC, Fernandes CP, Hotza D, Quadri MGN (2018) Cellular ceramics obtained by a combination of direct foaming of soybean oil emulsified alumina suspensions with gel consolidation using gelatin. Ceram Int 44:2436–2445. https://doi.org/10.1016/j.ceramint.2017.10.21510.1016/j.ceramint.2017.10.215 ↗
31. Adolfsson E (2006) Gelcasting of Zirconia using agarose. J Am Ceram Soc 89:1897–1902. https://doi.org/10.1111/j.1551-2916.2006.01040.x10.1111/j.1551-2916.2006.01040.x ↗
32. Wan T, Yao D, Hu H, Xia Y, Zuo K, Zeng Y (2014) Fabrication of porous Si3N4 ceramics through a novel gelcasting method. Mater Lett 133:190–192. https://doi.org/10.1016/j.matlet.2014.06.18210.1016/j.matlet.2014.06.182 ↗
33. Wan T, Yao D, Yin J, Xia Y, Zuo K, Zeng Y (2015) The microstructure and mechanical properties of porous silicon nitride ceramics prepared via novel aqueous gelcasting. Int J Appl Ceram Technol 12:932–938. https://doi.org/10.1111/ijac.1242410.1111/ijac.12424 ↗
34. Yang Y, Shimai S, Wang S (2013) Room-temperature gelcasting of alumina with a water-soluble copolymer. J Mater Res 28:1512–1516. https://doi.org/10.1557/jmr.2013.13210.1557/jmr.2013.132 ↗
35. Zhang J, Sun Y, Shimai S, Peng X, Zhao J, Zhou G, Wang S (2017) Effect of TMAH on the rheological behavior of alumina slurries for gelcasting. J Asian Ceram Soc 5:261–265. https://doi.org/10.1016/j.jascer.2017.05.00210.1016/j.jascer.2017.05.002 ↗
36. Zhu X, Uchikoshi T, Suzuki TS, Sakka Y (2007) Effect of polyethylenimine on hydrolysis and dispersion properties of aqueous Si3N4 suspensions. J Am Ceram Soc 90:797–804. https://doi.org/10.1111/j.1551-2916.2007.01491.x10.1111/j.1551-2916.2007.01491.x ↗
37. Zhang J, Ye F, Jiang D, Iwasa M (2005) Dispersion of Si3N4 powders in aqueous media. Colloids Surf A Physicochem Eng Asp 259:117–123. https://doi.org/10.1016/j.colsurfa.2005.02.00610.1016/j.colsurfa.2005.02.006 ↗
38. Yuan Z, Zhang Y, Zhou Y, Dong S (2014) Effect of solid loading on properties of reaction bonded silicon carbide ceramics by gelcasting. RSC Adv 4:50386–50392. https://doi.org/10.1039/C4RA05817H10.1039/C4RA05817H ↗
39. Bergström L (1998) Shear thinning and shear thickening of concentrated ceramic suspensions. Colloids Surf A Physicochem Eng Asp 133:151–155. https://doi.org/10.1016/S0927-7757(97)00133-710.1016/S0927-7757(97)00133-7 ↗
40. Giuntoli A, Puosi F, Leporini D, Starr FW, Douglas JF (2020) Predictive relation for the α-relaxation time of a coarse-grained polymer melt under steady shear. Sci Adv 6:eaaz0777. https://doi.org/10.1126/sciadv.aaz077710.1126/sciadv.aaz0777 ↗
41. Montanaro L, Coppola B, Palmero P, Tulliani J-M (2019) A review on aqueous gelcasting: a versatile and low-toxic technique to shape ceramics. Ceram Int 45:9653–9673. https://doi.org/10.1016/j.ceramint.2018.12.07910.1016/j.ceramint.2018.12.079 ↗
42. Zou C, Zhang C, Li B, Wang S, Cao F (2013) Microstructure and properties of porous silicon nitride ceramics prepared by gel-casting and gas pressure sintering. Mater Des 44:114–118. https://doi.org/10.1016/j.matdes.2012.07.05610.1016/j.matdes.2012.07.056 ↗
43. Chen S, Wang L, He G, Li J, Wang C-A (2022) Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS). J Adv Ceram 11:172–183. https://doi.org/10.1007/s40145-021-0525-710.1007/s40145-021-0525-7 ↗
44. Li L, Li Q, Hong J, Sun M, Zhang J, Dong S (2018) Effect of Si3N4 solid contents on mechanical and dielectric properties of porous Si3N4 ceramics through freeze-drying. J Alloy Compd 732:136–140. https://doi.org/10.1016/j.jallcom.2017.10.17210.1016/j.jallcom.2017.10.172 ↗
45. Zhang X, Huo W, Yan S, Chen Y, Gan K, Liu J, Yang J (2018) Innovative application of PVA hydrogel for the forming of porous Si3N4 ceramics via freeze-thaw technique. Ceram Int 44:13409–13413. https://doi.org/10.1016/j.ceramint.2018.03.07110.1016/j.ceramint.2018.03.071 ↗
46. Zhang X, Huo W, Gan K, Wang Y, Hu Z, Yang J (2019) Si3N4 hollow microsphere toughened porous ceramics from direct coagulation method via dispersant reaction. Adv Eng Mater 21:1800858. https://doi.org/10.1002/adem.20180085810.1002/adem.201800858 ↗
47. Yin L, Zhou X, Yu J, Wang H (2016) Highly porous silicon nitride foam prepared using a route similar to the making of aerated food. Int J Appl Ceram Technol 13:395–404. https://doi.org/10.1111/ijac.1249710.1111/ijac.12497 ↗
48. Yin L, Zhou X, Yu J, Wang H (2016) Preparation of high porous silicon nitride foams with ultra-thin walls and excellent mechanical performance for heat exchanger application by using a protein foaming method. Ceram Int 42:1713–1719. https://doi.org/10.1016/j.ceramint.2015.09.12810.1016/j.ceramint.2015.09.128 ↗
49. Bi C, Lu Y, Yang X (2020) Effective Thermal Conductivity for Low Density Silicon Nitride Porous Ceramics, J. Conf. Ser, Phys. https://doi.org/10.1088/1742-6596/1681/1/01200310.1088/1742-6596/1681/1/012003 ↗
50. Wang S, Jia D, Yang Z, Duan X, Tian Z, Zhou Y (2013) Effect of BN content on microstructures, mechanical and dielectric properties of porous BN/Si3N4 composite ceramics prepared by gel casting. Ceram Int 39:4231–4237. https://doi.org/10.1016/j.ceramint.2012.11.00510.1016/j.ceramint.2012.11.005 ↗
51. Yang H, Li Y, Li Q, Wang Z, Wu H, Liu X, Wu Y, Cheng X (2020) Preparation and properties of porous silicon nitride ceramics with polymethyl methacrylate as pore-forming agent. Ceram Int 46:17122–17129. https://doi.org/10.1016/j.ceramint.2020.03.20410.1016/j.ceramint.2020.03.204 ↗
52. Cao S, Zhang D, Wang J, Zhang J, Zhou J, Zhang Y (2020) Synthesis of self-toughness porous Si3N4 ceramics with three-dimensional cage structures. Mater Lett 270:127651. https://doi.org/10.1016/j.matlet.2020.12765110.1016/j.matlet.2020.127651 ↗
53. Yang X, Li B, Zhang C, Wang S, Liu K, Zou C (2016) Fabrication and properties of porous silicon nitride wave-transparent ceramics via gel-casting and pressureless sintering. Mater Sci Eng A 663:174–180. https://doi.org/10.1016/j.msea.2016.03.11610.1016/j.msea.2016.03.116 ↗
54. Li X, Zhang L, Yin X (2012) Fabrication and properties of porous Si3N4 ceramic with high porosity. J Mater Sci Technol 28:1151–1156. https://doi.org/10.1016/S1005-0302(12)60185-610.1016/S1005-0302(12)60185-6 ↗
55. Xia Y, Zeng Y-P, Jiang D (2011) Mechanical and dielectric properties of porous Si3N4 ceramics using PMMA as pore former. Ceram Int 37:3775–3779. https://doi.org/10.1016/j.ceramint.2011.06.01310.1016/j.ceramint.2011.06.013 ↗
56. Li J, Luo F, Zhu D, Zhou W (2006) Preparation and dielectric properties of porous silicon nitride ceramics. Trans Nonferrous Met Soc China 16:s487–s489. https://doi.org/10.1016/S1003-6326(06)60240-910.1016/S1003-6326(06)60240-9 ↗
57. Zhang C, Ye F, Cheng L, Li M, Zhou J, Zhang Q (2021) Electromagnetic wave-transparent porous silicon nitride ceramic prepared by gel-casting combined with in-situ nitridation reaction. J Eur Ceram Soc 41:7620–7629. https://doi.org/10.1016/j.jeurceramsoc.2021.08.04710.1016/j.jeurceramsoc.2021.08.047 ↗
58. Chen F, Cao F, Pan H, Wang K, Shen Q, Li J, Wang S (2012) Mechanical and dielectric properties of silicon nitride ceramics with high and hierarchical porosity. Mater Des 40:562–566. https://doi.org/10.1016/j.matdes.2012.03.02610.1016/j.matdes.2012.03.026 ↗