journal article·2026-02

Atomistic study of compression and shear in aluminum nanofoams: dislocation mechanisms and temperature effects

A. Rezaei Sameti

Journal of Materials Science· Volume 61· Issue 5
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Cellular and Composite Structures · Nanoporous metals and alloys · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. Parveez B, Jamal NA, Anuar H, Ahmad Y, Aabid A, Baig M (2022) Microstructure and mechanical properties of metal foams fabricated via melt foaming and powder metallurgy technique: a review. Materials 15:530210.3390/ma15155302 ↗
2. Montanini R (2005) Measurement of strain rate sensitivity of aluminium foams for energy dissipation. Int J Mech Sci 47:26–4210.1016/j.ijmecsci.2004.12.007 ↗
3. Pinna A, Pia G, Casula MF, Delogu F, Sogne E, Falqui A, Pilia L (2021) Fabrication of nanoporous Al by vapor-phase dealloying: morphology features, mechanical properties and model predictions. Appl Sci 11:663910.3390/app11146639 ↗
4. Mikelani M, Panjepour M, Taherizadeh A (2020) Investigation on mechanical properties of nanofoam aluminum single crystal: using the method of molecular dynamics simulation. Appl Phys A 126:92110.1007/s00339-020-04105-0 ↗
5. Garoli D, Schirato A, Giovannini G, Cattarin S, Ponzellini P, Calandrini E, Proietti Zaccaria R, D’Amico F, Pachetti M, Yang W (2020) Galvanic replacement reaction as a route to prepare nanoporous aluminum for UV plasmonics. Nanomaterials 10:10210.3390/nano10010102 ↗
6. Yang W, Luo ZP, Bao WK, Xie H, You ZS, Jin HJ (2021) Light, strong, and stable nanoporous aluminum with native oxide shell. Sci Adv 7:eabb947110.1126/sciadv.abb9471 ↗
7. Xiang M, Cui J, Yang Y, Liao Y, Wang K, Chen Y, Chen J (2017) Shock responses of nanoporous aluminum by molecular dynamics simulations. Int J Plast 97:24–4510.1016/j.ijplas.2017.05.008 ↗
8. Kalpakoglou T, Yiatros S (2022) Metal foams: a review for mechanical properties under tensile and shear stress. Front Mater 9:99867310.3389/fmats.2022.998673 ↗
9. Khoei AR, Rezaei Sameti A, Mofatteh H (2023) Multiscale analysis of nano-powder compaction process using the FEM-MD technique. Powder Technol 423:11850710.1016/j.powtec.2023.118507 ↗
10. Muchhala D, Yadav BN, Alfantazi A, Lin P, Mondal D, Huang P, Yeh D, Liu D (2025) Uniaxial tensile and compressive deformation performance of closed-cell aluminum hybrid foams. Mater Chem Phys 342:13094010.1016/j.matchemphys.2025.130940 ↗
11. Zhang W, Qin Q, Li J, Li K, Poh LH, Li Y, Zhang J, Xie S, Chen H, Zhao J (2020) Deformation and failure of hybrid composite sandwich beams with a metal foam core under quasi-static load and low-velocity impact. Compos Struct 242:11217510.1016/j.compstruct.2020.112175 ↗
12. Tian X, Ma K, Ji G, Cui J, Liao Y, Xiang M (2021) Anisotropic shock responses of nanoporous Al by molecular dynamics simulations. PLoS ONE 16:e024717210.1371/journal.pone.0247172 ↗
13. Czerwinski F (2020) Thermal stability of aluminum alloys. Materials 13:344110.3390/ma13153441 ↗
14. Winter N, Becton M, Zhang L, Wang X (2016) Failure mechanisms and scaling laws of nanoporous aluminum: a computational study. Adv Eng Mater 18:632–64210.1002/adem.201500315 ↗
15. Gunkelmann N, Bringa E, Rosandi Y (2028) Molecular dynamics simulations of aluminum foams under tension: influence of oxidation. J Phys Chem C 122:26243–2625010.1021/acs.jpcc.8b07146 ↗
16. Henz BJ, Hawa T, Zachariah MR (2009) Molecular dynamics simulation of the kinetic sintering of Ni and Al nanoparticles. Mol Simul 35:804–81110.1080/08927020902818021 ↗
17. Olmsted DL, Hector LG, Curtin WA, Clifton RJ (2005) Atomistic simulations of dislocation mobility in Al, Ni and Al/Mg alloys. Model Simul Mater Sci Eng 13:371–38810.1088/0965-0393/13/3/007 ↗
18. Khoei AR, Orvati Movaffagh AM, Rezaei Sameti A (2024) Thermo-mechanical characteristics of oxide-coated aluminum nano-powder. Int J Therm Sci 197:10876710.1016/j.ijthermalsci.2023.108767 ↗
19. Khoei AR, Khajehpour B, Rezaei Sameti A (2022) Surface oxidization effect on the mechanical behavior of aluminum nanopowders under triaxial compression test. Appl Surf Sci 606:15490710.1016/j.apsusc.2022.154907 ↗
20. Khoei AR, Rezaei Sameti A, Kazempour Z, Ghafouri Pourkermani A (2024) Mechanical characteristics of die-wall friction on the compaction process of metal nano-powders. Powder Technol 444:11998710.1016/j.powtec.2024.119987 ↗
21. Pun GPP, Mishin Y (2009) Development of an interatomic potential for the Ni-Al system. Philos Mag 89:3245–326710.1080/14786430903258184 ↗
22. Simons G, Wang H (1977) Single crystal elastic constants and calculated aggregate properties. MIT Press
23. Grünwald E, Nuster R, Paltauf G, Maier T, Wimmer-Teubenbacher R, Konetschnik R, Kiener D, Leitgeb V, Kock A, Brunner R (2017) Laser ultrasonic thin film characterization of Si-Cu-AlCu multi-layered stacks. Mater Today Proc 4:7122–712710.1016/j.matpr.2017.08.006 ↗
24. Vallin J, Mongy M, Salama K, Beckman O (1964) Elastic constants of aluminum. J Appl Phys 35:1825–182610.1063/1.1713749 ↗
25. Khoei AR, Seddighian MR, Rezaei Sameti A (2024) Machine learning-based multiscale framework for mechanical behavior of nano-crystalline structures. Int J Mech Sci 265:10889710.1016/j.ijmecsci.2023.108897 ↗
26. Yildiz O, Ahadi A, Kirca M (2020) Strain rate effects on tensile and compression behavior of nano-crystalline nanoporous gold: a molecular dynamic study. Mech Mater 143:10333810.1016/j.mechmat.2020.103338 ↗
27. Nikravesh Y, Rezaei Sameti A, Khoei AR (2022) An atomistic-continuum multiscale analysis for heterogeneous nanomaterials and its application in nanoporous gold foams. Appl Math Model 107:353–37810.1016/j.apm.2022.02.029 ↗
28. Suárez O, Estremera E, Soler R, Declet A, Hernández-Maldonado A (2014) Fabrication of porous and nanoporous aluminum via selective dissolution of Al-Zn alloys. Adv Mater Sci Eng 2014:96304210.1155/2014/963042 ↗
29. Khoei AR, Palahang P, Rezaei Sameti A (2026) Tribological properties of alkanes in confined systems; a molecular dynamics analysis of nano-powder compaction processes. Powder Technol 467:12148010.1016/j.powtec.2025.121480 ↗
30. Li J, Li J, Chen Y, Chen J (2022) Strengthening modulus and softening strength of nanoporous gold in multiaxial tension: insights from molecular dynamics. Nanomaterials 12:438110.3390/nano12244381 ↗
31. Rezaei Sameti A, Mousivand A (2025) The influence of diameter on the strength and ductility of BCC iron nanowire under axial loading: a reactive molecular dynamics simulation. Physica B 713:41740210.1016/j.physb.2025.417402 ↗
32. Khoei AR, Mofatteh H, Rezaei Sameti A (2023) A multiscale framework for atomistic-continuum transition in nano-powder compaction process using a cap plasticity model. Int J Mech Sci 255:10848210.1016/j.ijmecsci.2023.108482 ↗
33. Khoei AR, Rezaei Sameti A (2017) A computational model for atomistic-based higher-order continua using the FEM technique. Finite Elem Anal Des 137:26–3910.1016/j.finel.2017.08.005 ↗
34. Plimpton S (1995) Fast parallel algorithms for short-range molecular dynamics. J Comput Phys 117:1–1910.1006/jcph.1995.1039 ↗
35. Stukowski A (2014) A triangulation-based method to identify dislocations in atomistic models. J Mech Phys Solids 70:314–31910.1016/j.jmps.2014.06.009 ↗
36. Gölbaşı Z, Öztürk B, Üllen NB (2024) The structural and mechanical properties of open-cell aluminum foams: dependency on porosity, pore size, and ceramic particle addition. J Alloys Compd 1009:17692110.1016/j.jallcom.2024.176921 ↗
37. Guo Q, Li W, Yao W, Wang X, Huang C (2021) Mechanical properties and constitutive model applied to the high-speed impact of aluminum foam that considers its meso-structural parameters. Materials 14:620610.3390/ma14206206 ↗
38. Novak N, Vesenjak M, Duarte I, Tanaka S, Hokamoto K, Krstulović-Opara L, Guo B, Chen P, Ren Z (2019) Compressive behaviour of closed-cell aluminium foam at different strain rates. Materials 12:410810.3390/ma12244108 ↗
39. Giri A, Tao J, Wang L, Kirca M, To A (2014) Compressive behavior and deformation mechanism of nanoporous open-cell foam with ultrathin ligaments. J Nanomech Micromech 4:A401301210.1061/(ASCE)NM.2153-5477.0000079 ↗
40. Ruestes CJ, Farkas D, Caro A, Bringa E (2016) Hardening under compression in Au foams. Acta Mater 108:1–710.1016/j.actamat.2016.02.030 ↗
41. Greer JR, De Hosson JTM (2011) Plasticity in small-sized metallic systems: intrinsic versus extrinsic size effect. Prog Mater Sci 56:654–72410.1016/j.pmatsci.2011.01.005 ↗
42. Farkas D, Caro A, Bringa E, Crowson D (2013) Mechanical response of nanoporous gold. Acta Mater 61:3249–325610.1016/j.actamat.2013.02.013 ↗
43. Roschning B, Huber N (2016) Scaling laws of nanoporous gold under uniaxial compression: effects of structural disorder on the solid fraction, elastic Poisson’s ratio, Young’s modulus and yield strength. J Mech Phys Solids 92:55–7110.1016/j.jmps.2016.02.018 ↗
44. Odermatt A, Richert C, Huber N (2020) Prediction of elastic-plastic deformation of nanoporous metals by FEM beam modeling: a bottom-up approach from ligaments to real microstructures. Mater Sci Eng A 791:13970010.1016/j.msea.2020.139700 ↗
45. Khoei AR, Vafaei Sefti M, Rezaei Sameti A (2024) Reactive molecular dynamics analysis of alumina nano-powders under warm compaction process. Adv Powder Technol 35:10470210.1016/j.apt.2024.104702 ↗
46. Mayer AE, Mayer PN, Lekanov MV, Panchenko BA (2022) Incipience of plastic flow in aluminum with nanopores: molecular dynamics and machine-learning-based description. Metals 12:215810.3390/met12122158 ↗
47. Bastawros AF, Bart-Smith H, Evans AG (2000) Experimental analysis of deformation mechanisms in a closed-cell aluminum alloy foam. J Mech Phys Solids 48:301–32210.1016/S0022-5096(99)00035-6 ↗
48. Esfahani MN, Jabbari M (2020) Molecular dynamics simulations of deformation mechanisms in the mechanical response of nanoporous gold. Materials 13:207110.3390/ma13092071 ↗
49. Michailidis N, Stergioudi F, Omar H, Tsipas D (2010) FEM modeling of the response of porous Al in compression. Comput Mater Sci 48:282–28610.1016/j.commatsci.2010.01.008 ↗
50. Xia R, Wu RN, Liu YL, Sun XY (2015) The role of computer simulation in nanoporous metals-a review. Materials 8:5060–508310.3390/ma8085060 ↗
51. Rodriguez-Nieva JF, Ruestes CJ, Tang Y, Bringa EM (2014) Atomistic simulation of the mechanical properties of nanoporous gold. Acta Mater 80:67–7610.1016/j.actamat.2014.07.051 ↗
52. Wang Y, Bi W, Deng L, Zhang X, Tang J, Wang L (2022) Study on the relationship between surface and dislocation of nanoporous copper under cyclic shear loading. AIP Adv 12:03531810.1063/5.0085569 ↗
53. Dou R, Derby B (2009) The micromechanisms of deformation in nanoporous gold. MRS Proc 1224:FF09-0710.1557/PROC-1224-FF09-07 ↗
54. Wang X, Wang X, Jian K, Xu L, Ju A, Guan Z, Ma L (2021) Mechanical properties of Al foams subjected to compression by a cone-shaped indenter. ACS Omega 6:28150–2816110.1021/acsomega.1c04217 ↗
55. Rezaei Sameti A, Mousivand A (2025) Size, temperature, and point defect effects on surface oxidation kinetics and mechanical properties of iron nanowires under quasi-static loading. Mater Today Commun 48:11351410.1016/j.mtcomm.2025.113514 ↗
56. Sameti AR, Forughian F (2025) Effects of temperature and point defects on the mechanical behavior of Ni-rich NiTi shape memory alloy under quasi-static uniaxial loading. Appl Phys A 131:74810.1007/s00339-025-08886-0 ↗
57. Rezaei Sameti A, Mousivand A (2026) Influence of surface hydroxylation on the mechanical properties of iron nanopillars containing different thicknesses of pre-oxide layers. Mater Chem Phys 348:13159910.1016/j.matchemphys.2025.131599 ↗
58. Kim J, Ha T, Lee Y, Kang B, Kim Y (2024) Mechanical properties and deformation behavior of open-cell type aluminum foams with structural conditions and alloy composition. Metals 14:87710.3390/met14080877 ↗
59. Kováčik J, Marsavina L, Linul E (2018) Poisson’s ratio of closed-cell aluminium foams. Materials 11:190410.3390/ma11101904 ↗
60. Fu W, Li Y (2024) Fabrication, processing, properties, and applications of closed-cell aluminum foams: a review. Materials 17:56010.3390/ma17030560 ↗
61. Tang CY, Fan J, Tsui CP, Lee TC, Chan LC, Rao B (2007) Quantification of shear damage evolution in aluminium alloy 2024T3. Acta Mech Solida Sin 20:57–6410.1007/s10338-007-0707-z ↗
62. Yildiz YO, Kirca M (2018) Compression and shear behavior of ultrathin coated nanoporous gold: a molecular dynamics study. J Appl Phys 124:18430110.1063/1.5041340 ↗
63. He L, Hadi M, Liu H (2020) Mechanism of coarsening and deformation behavior of nanoporous Cu with varying relative density. J Mater Res 35:2620–262810.1557/jmr.2020.68 ↗
64. Jin HJ, Weissmüller J (2011) A material with electrically tunable strength and flow stress. Science 332:1179–118210.1126/science.1202190 ↗
65. Kibey S, Liu JB, Johnson DD, Sehitoglu H (2007) Predicting twinning stress in fcc metals: linking twin-energy pathways to twin nucleation. Acta Mater 55:6843–685110.1016/j.actamat.2007.08.042 ↗
66. Mameka N, Markmann J, Weissmüller J (2017) On the impact of capillarity for strength at the nanoscale. Nat Commun 8:197610.1038/s41467-017-01434-2 ↗
67. Dou R, Derby B (2009) A universal scaling law for the strength of metal micropillars and nanowires. Scr Mater 61:524–52710.1016/j.scriptamat.2009.05.012 ↗
68. Polsin DN, Fratanduono DE, Rygg JR, Lazicki A, Smith RF, Eggert JH, Gregor MC, Henderson BH, Delettrez JA, Kraus RG, Celliers PM, Coppari F, Swift DC, McCoy CA, Seagle CT, Davis J-P, Burns SJ, Collins GW, Boehly TR (2017) Measurement of body-centered-cubic aluminum at 475 GPa. Phys Rev Lett 119:17570210.1103/PhysRevLett.119.175702 ↗
69. Basavaraj K, Ray A (2024) Phase transition lowering in shock compressed single-crystal aluminum: atomistic insights. Phys Rev B 109:10410110.1103/PhysRevB.109.104101 ↗
70. Chen W, Chen W, Zhu Z, Zheng M, Wei X, Shi T, Qu D (2023) Study on the nano-friction behavior of nickel-based Ag film composites based on molecular dynamics. Lubricants 11:11010.3390/lubricants11030110 ↗
71. Snopiński P, Kotoul M, Petruška J (2023) Revealing the strengthening contribution of stacking faults, dislocations and grain boundaries in severely deformed LPBF AlSi10Mg alloy. Sci Rep 13:1616610.1038/s41598-023-43448-5 ↗
72. Beets N, Farkas D, Corcoran S (2019) Deformation mechanisms and scaling relations in the mechanical response of nano-porous Au. Acta Mater 165:626–63710.1016/j.actamat.2018.12.006 ↗
73. Tian Y, Zhao L, Chen S (2015) Significant contribution of stacking faults to the strain hardening behavior of Cu-15%Al alloy with different grain sizes. Sci Rep 5:1670710.1038/srep16707 ↗
74. Wang T, Gwalani B, Song M, Ma X, Liu T, Das H, Silverstein J, Whalen S (2022) Extreme shear deformation enables ultra-fast riveting of high strength aluminum alloys. J Manuf Process 75:814–82510.1016/j.jmapro.2022.01.046 ↗
75. Hull D, Bacon DJ (2011) Introduction to Dislocations, 5th edn. Butterworth-Heinemann, Oxford
76. Han B, Li Y, Wang Z, Gu X, Zhang Q (2021) Temperature effects on the compressive behaviors of closed-cell copper foams prepared by powder metallurgy. Materials 14:640510.3390/ma14216405 ↗
77. Pham M-S, Iadicola M, Creuziger A, Hu L, Rollett AD (2015) Thermally-activated constitutive model including dislocation interactions, aging and recovery for strain path dependence of solid solution strengthened alloys: application to AA5754-O. Int J Plast 75:226–24310.1016/j.ijplas.2014.09.010 ↗