Residual stress in metal additive manufacturing: influencing parameters, measurements, and control approaches
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Saberi S, Mohd. Yusu R, Zulkifli N, Megat Ahma MMH (2010) Effective factors on advanced manufacturing technology implementation performance: a review. J Appl Sci 10(13):1229–1242. https://doi.org/10.3923/jas.2010.1229.124210.3923/jas.2010.1229.1242 ↗
2. Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23(6):1917–1928. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
3. Yan C, Hao L, Hussein A, Bubb SL, Young P, Raymont D (2014) Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering. J Mater Process Technol 214(4):856–864. https://doi.org/10.1016/j.jmatprotec.2013.12.00410.1016/j.jmatprotec.2013.12.004 ↗
4. Mukherjee T, Zuback JS, De A, DebRoy T (2016) Printability of alloys for additive manufacturing. Sci Rep 6(1):19717. https://doi.org/10.1038/srep1971710.1038/srep19717 ↗
5. Ngo TD, Kashani A, Imbalzano G, Nguyen KTQ, Hui D (2018) Additive manufacturing (3D printing): a review of materials, methods, applications and challenges. Compos Part B Eng 143:172–196. https://doi.org/10.1016/j.compositesb.2018.02.01210.1016/j.compositesb.2018.02.012 ↗
6. Rejeski D, Zhao F, Huang Y (2018) Research needs and recommendations on environmental implications of additive manufacturing. Additive Manuf 19:21–28. https://doi.org/10.1016/j.addma.2017.10.01910.1016/j.addma.2017.10.019 ↗
7. Blakey-Milner B et al (2021) Metal additive manufacturing in aerospace: a review. Mater Des 209:110008. https://doi.org/10.1016/j.matdes.2021.11000810.1016/j.matdes.2021.110008 ↗
8. Ahn D-G (2016) Direct metal additive manufacturing processes and their sustainable applications for green technology: a review. Int J Precis Eng Manuf-Green Technol 3(4):381–395. https://doi.org/10.1007/s40684-016-0048-910.1007/s40684-016-0048-9 ↗
9. Pan, Z., Ding, D., Wu, B., Cuiuri, D., Li, H., & Norrish, J. (2018). Arc welding processes for additive manufacturing: a review. Trans Intell Weld Manuf, 3-2410.1007/978-981-10-5355-9_1 ↗
10. DebRoy T et al (2018) Additive manufacturing of metallic components—process, structure and properties. Prog Mater Sci 92:112–224. https://doi.org/10.1016/j.pmatsci.2017.10.00110.1016/j.pmatsci.2017.10.001 ↗
11. Yakout M, Elbestawi MA, Veldhuis SC (2018) A review of metal additive manufacturing technologies. Solid State Phenom 278:1–14. https://doi.org/10.4028/www.scientific.net/SSP.278.110.4028/www.scientific.net/SSP.278.1 ↗
12. Ziaee M, Crane NB (2019) Binder jetting: a review of process, materials, and methods. Additive Manuf 28:781–801. https://doi.org/10.1016/j.addma.2019.05.03110.1016/j.addma.2019.05.031 ↗
13. Sarzyński B, Śnieżek L, Grzelak K (2024) Metal additive manufacturing (MAM) applications in production of vehicle parts and components—a review. Metals (Basel) 14(2):195. https://doi.org/10.3390/met1402019510.3390/met14020195 ↗
14. Trevisan F et al (2017) On the selective laser melting (SLM) of the AlSi10Mg alloy: process, microstructure, and mechanical properties. Materials (Basel) 10(1):76. https://doi.org/10.3390/ma1001007610.3390/ma10010076 ↗
15. Harun WSW et al (2018) A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications. Powder Technol 331:74–97. https://doi.org/10.1016/j.powtec.2018.03.01010.1016/j.powtec.2018.03.010 ↗
16. Kruth J-P, Levy G, Klocke F, Childs THC (2007) Consolidation phenomena in laser and powder-bed based layered manufacturing. CIRP Ann 56(2):730–759. https://doi.org/10.1016/j.cirp.2007.10.00410.1016/j.cirp.2007.10.004 ↗
17. Kechagias J, Maropoulos S, Karagiannis S (2004) Process build‐time estimator algorithm for laminated object manufacturing. Rapid Prototyp J 10(5):297–304. https://doi.org/10.1108/1355254041056233110.1108/13552540410562331 ↗
18. Amato, K. N., Hernandez, J., Murr, L. E., Martinez, E., Gaytan, S. M., Shindo, P. W., & Collins, S. (2012). Comparison of microstructures and properties for a Ni-base superalloy (Alloy 625) fabricated by electron and laser beam melting.J Mater Sci Res, 1(2), 3
19. Hu Y, Cong W (2018) A review on laser deposition-additive manufacturing of ceramics and ceramic reinforced metal matrix composites. Ceram Int 44(17):20599–20612. https://doi.org/10.1016/j.ceramint.2018.08.08310.1016/j.ceramint.2018.08.083 ↗
20. Ahn D, Kweon J-H, Choi J, Lee S (2012) Quantification of surface roughness of parts processed by laminated object manufacturing. J Mater Process Technol 212(2):339–346. https://doi.org/10.1016/j.jmatprotec.2011.08.01310.1016/j.jmatprotec.2011.08.013 ↗
21. Khairallah SA, Anderson AT, Rubenchik A, King WE (2016) Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Mater 108:36–45. https://doi.org/10.1016/j.actamat.2016.02.01410.1016/j.actamat.2016.02.014 ↗
22. Kamath C, El-dasher B, Gallegos GF, King WE, Sisto A (2014) Density of additively-manufactured, 316L SS parts using laser powder-bed fusion at powers up to 400 W. Int J Adv Manuf Technol 74(1–4):65–78. https://doi.org/10.1007/s00170-014-5954-910.1007/s00170-014-5954-9 ↗
23. Keist JS, Palmer TA (2016) Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition. Mater Des 106:482–494. https://doi.org/10.1016/j.matdes.2016.05.04510.1016/j.matdes.2016.05.045 ↗
24. Ma M, Wang Z, Zeng X (2015) Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy. Mater Charact 106:420–427. https://doi.org/10.1016/j.matchar.2015.06.02710.1016/j.matchar.2015.06.027 ↗
25. Shah K, Pinkerton AJ, Salman A, Li L (2010) Effects of melt pool variables and process parameters in laser direct metal deposition of aerospace alloys. Mater Manuf Process 25(12):1372–1380. https://doi.org/10.1080/10426914.2010.48099910.1080/10426914.2010.480999 ↗
26. Brandl E, Palm F, Michailov V, Viehweger B, Leyens C (2011) Mechanical properties of additive manufactured titanium (Ti–6Al–4V) blocks deposited by a solid-state laser and wire. Mater Des 32(10):4665–4675. https://doi.org/10.1016/j.matdes.2011.06.06210.1016/j.matdes.2011.06.062 ↗
27. Brandl E, Schoberth A, Leyens C (2012) Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM). Mater Sci Eng A 532:295–307. https://doi.org/10.1016/j.msea.2011.10.09510.1016/j.msea.2011.10.095 ↗
28. Bhatt PM, Kabir AM, Peralta M, Bruck HA, Gupta SK (2019) A robotic cell for performing sheet lamination-based additive manufacturing. Addit Manuf 27:278–289. https://doi.org/10.1016/j.addma.2019.02.00210.1016/j.addma.2019.02.002 ↗
29. Taheri, H., Shoaib, M. R. B. M., Koester, L. W., Bigelow, T. A., Collins, P. C., & Bond, L. J. (2017). Powder-based additive manufacturing-a review of types of defects, generation mechanisms, detection, property evaluation and metrology. Int J Addit Subtr Mater Manuf, 1(2), 172-209.
30. Zhang J, Xiang Toh AY, Wang H, Lu WF, Fuh JYH (2019) Vibration-assisted conformal polishing of additively manufactured structured surface. Proc Inst Mech Eng C J Mech Eng Sci 233(12):4154–4164. https://doi.org/10.1177/095440621881135910.1177/0954406218811359 ↗
31. Gisario A, Kazarian M, Martina F, Mehrpouya M (2019) Metal additive manufacturing in the commercial aviation industry: a review. J Manuf Syst 53:124–149. https://doi.org/10.1016/j.jmsy.2019.08.00510.1016/j.jmsy.2019.08.005 ↗
32. Wang K et al (2020) Study on defect-free debinding green body of ceramic formed by DLP technology. Ceram Int 46(2):2438–2446. https://doi.org/10.1016/j.ceramint.2019.09.23710.1016/j.ceramint.2019.09.237 ↗
33. Chuang A, Erlebacher J (2020) Challenges and opportunities for integrating dealloying methods into additive manufacturing. Materials 13(17):3706. https://doi.org/10.3390/ma1317370610.3390/ma13173706 ↗
34. Bartlett JL, Li X (2019) An overview of residual stresses in metal powder bed fusion. Addit Manuf 27:131–149. https://doi.org/10.1016/j.addma.2019.02.02010.1016/j.addma.2019.02.020 ↗
35. Wang C, Jiang C, Cai F, Zhao Y, Zhu K, Chai Z (2016) Effect of shot peening on the residual stresses and microstructure of tungsten cemented carbide. Mater Des 95:159–164. https://doi.org/10.1016/j.matdes.2016.01.10110.1016/j.matdes.2016.01.101 ↗
36. Leuders S et al (2013) On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: fatigue resistance and crack growth performance. Int J Fatigue 48:300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.01110.1016/j.ijfatigue.2012.11.011 ↗
37. Megahed M, Mindt H-W, N’Dri N, Duan H, Desmaison O (2016) Metal additive-manufacturing process and residual stress modeling. Integr Mater Manuf Innov 5(1):61–93. https://doi.org/10.1186/s40192-016-0047-210.1186/s40192-016-0047-2 ↗
38. Srivastava S, Garg RK, Sharma VS, Sachdeva A (2021) Measurement and mitigation of residual stress in wire-arc additive manufacturing: a review of macro-scale continuum modelling approach. Arch Comput Methods Eng 28(5):3491–3515. https://doi.org/10.1007/s11831-020-09511-410.1007/s11831-020-09511-4 ↗
39. Carpenter K, Tabei A (2020) On residual stress development, prevention, and compensation in metal additive manufacturing. Materials 13(2):255. https://doi.org/10.3390/ma1302025510.3390/ma13020255 ↗
40. Mercelis P, Kruth J (2006) Residual stresses in selective laser sintering and selective laser melting. Rapid Prototyp J 12(5):254–265. https://doi.org/10.1108/1355254061070701310.1108/13552540610707013 ↗
41. Withers PJ, Bhadeshia HKDH (2001) Residual stress. Part 1—measurement techniques. Mater Sci Technol 17(4):355–365. https://doi.org/10.1179/02670830110150998010.1179/026708301101509980 ↗
42. Brinksmeier E, Cammett JT, König W, Leskovar P, Peters J, Tönshoff HK (1982) Residual stresses—measurement and causes in machining processes. CIRP Ann 31(2):491–510. https://doi.org/10.1016/S0007-8506(07)60172-310.1016/S0007-8506(07)60172-3 ↗
43. Zhang Y, Zhang J (2017) Finite element simulation and experimental validation of distortion and cracking failure phenomena in direct metal laser sintering fabricated component. Addit Manuf 16:49–57. https://doi.org/10.1016/j.addma.2017.05.00210.1016/j.addma.2017.05.002 ↗
44. Kempen, JP, Thijs K, Vrancken L, Buls B, Humbeeck S, Van, Kryth J (2013) Producing crack-free, high density M2 HSS parts by selective laser melting: pre-heating the baseplate. In: Proceedings of the 24th international solid freeform fabrication symposium. Austin (TX): Laboratory for freeform fabrication; 2013, Leuven. pp. 131–139
45. Santamaria R, Wang K, Salasi M, Iannuzzi M, Mendoza MY, Quadir MZ (2023) Stress corrosion cracking of 316L stainless steel additively manufactured with sinter-based material extrusion. Materials (Basel) 16(11):4006. https://doi.org/10.3390/ma1611400610.3390/ma16114006 ↗
46. Yadollahi A, Shamsaei N (2017) Additive manufacturing of fatigue resistant materials: challenges and opportunities. Int J Fatigue 98:14–31. https://doi.org/10.1016/j.ijfatigue.2017.01.00110.1016/j.ijfatigue.2017.01.001 ↗
47. Zhao L, Santos Macías JG, Dolimont A, Simar A, Rivière-Lorphèvre E (2020) Comparison of residual stresses obtained by the crack compliance method for parts produced by different metal additive manufacturing techniques and after friction stir processing. Addit Manuf 36:101499. https://doi.org/10.1016/j.addma.2020.10149910.1016/j.addma.2020.101499 ↗
48. Wu AS, Brown DW, Kumar M, Gallegos GF, King WE (2014) An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel. Metall Mater Trans A 45(13):6260–6270. https://doi.org/10.1007/s11661-014-2549-x10.1007/s11661-014-2549-x ↗
49. Cai Z et al (2025) Characterization of anisotropy in additively manufactured materials through instrumented indentation testing. Chin J Mech Eng 38(1):13. https://doi.org/10.1186/s10033-024-01174-710.1186/s10033-024-01174-7 ↗
50. Hönnige JR et al (2018) Residual stress and texture control in Ti-6Al-4V wire + arc additively manufactured intersections by stress relief and rolling. Mater Des 150:193–205. https://doi.org/10.1016/j.matdes.2018.03.06510.1016/j.matdes.2018.03.065 ↗
51. Chen Y et al (2023) An experimental investigation into residual stress control of 24CrNiMo alloy steel by selective laser melting. Coatings 13(2):321. https://doi.org/10.3390/coatings1302032110.3390/coatings13020321 ↗
52. Gurmesa F, Lemu H, Adugna Y, Harsibo M (2024) Residual stresses in wire arc additive manufacturing products and their measurement techniques: a systematic review. Appl Mech 5(3):420–449. https://doi.org/10.3390/applmech503002510.3390/applmech5030025 ↗
53. Denlinger ER, Heigel JC, Michaleris P (2015) Residual stress and distortion modeling of electron beam direct manufacturing Ti-6Al-4V. Proc Inst Mech Eng B J Eng Manuf 229(10):1803–1813. https://doi.org/10.1177/095440541453949410.1177/0954405414539494 ↗
54. Prabhakar P, Sames WJ, Dehoff R, Babu SS (2015) Computational modeling of residual stress formation during the electron beam melting process for Inconel 718. Addit Manuf 7:83–91. https://doi.org/10.1016/j.addma.2015.03.00310.1016/j.addma.2015.03.003 ↗
55. Wang D-Z, Li K-L, Yu C-F, Ma J, Liu W, Shen Z-J (2019) Cracking behavior in additively manufactured pure tungsten. Acta Metall Sin Engl Lett 32(1):127–135. https://doi.org/10.1007/s40195-018-0752-210.1007/s40195-018-0752-2 ↗
56. Romano S, Nezhadfar PD, Shamsaei N, Seifi M, Beretta S (2020) High cycle fatigue behavior and life prediction for additively manufactured 17-4 PH stainless steel: effect of sub-surface porosity and surface roughness. Theor Appl Fract Mech 106:102477. https://doi.org/10.1016/j.tafmec.2020.10247710.1016/j.tafmec.2020.102477 ↗
57. Afroz L, Das R, Qian M, Easton M, Brandt M (2022) Fatigue behaviour of laser powder bed fusion (L-PBF) Ti–6Al–4V, Al–Si–Mg and stainless steels: a brief overview. Int J Fract 235(1):3–46. https://doi.org/10.1007/s10704-022-00641-310.1007/s10704-022-00641-3 ↗
58. Hosseini SM, Vaghefi E, Mirkoohi E (2023) The role of defect structure and residual stress on fatigue failure mechanisms of Ti-6Al-4V manufactured via laser powder bed fusion: effect of process parameters and geometrical factors. J Manuf Process 102:549–563. https://doi.org/10.1016/j.jmapro.2023.07.01410.1016/j.jmapro.2023.07.014 ↗
59. Armstrong M, Mehrabi H, Naveed N (2022) An overview of modern metal additive manufacturing technology. J Manuf Process 84:1001–1029. https://doi.org/10.1016/j.jmapro.2022.10.06010.1016/j.jmapro.2022.10.060 ↗
60. Buchbinder D, Schleifenbaum H, Heidrich S, Meiners W, Bültmann J (2011) High power selective laser melting (HP SLM) of aluminum parts. Phys Proc 12(PART 1):271–278. https://doi.org/10.1016/j.phpro.2011.03.03510.1016/j.phpro.2011.03.035 ↗
61. Kumar, B., Bag, S., & Ruhul Amin, M. (2022). Evaluation of phase Transformation strain and its influence on residual stress generation in laser welded Ti–6Al–4V alloy. J Manuf Sci Eng, 144(12), 121002.10.1115/1.4054903 ↗
62. Cruz V, Qiu Y, Birbilis N, Thomas S (2022) Stress corrosion cracking of 316L manufactured by laser powder bed fusion in 6% ferric chloride solution. Corros Sci 207:110535. https://doi.org/10.1016/j.corsci.2022.11053510.1016/j.corsci.2022.110535 ↗
63. Cabrini M et al (2021) Stress corrosion cracking of additively manufactured alloy 625. Materials 14(20):6115. https://doi.org/10.3390/ma1420611510.3390/ma14206115 ↗
64. Kumar B, Sahu S, Srinivasan D, Jaya BN (2023) Influence of heat input on solidification cracking in additively manufactured CM247LC Ni-based superalloy. Metall Mater Trans A 54(6):2394–2409. https://doi.org/10.1007/s11661-023-07027-710.1007/s11661-023-07027-7 ↗
65. Rao ACU, Vasu V, Govindaraju M, Srinadh KVS (2016) Stress corrosion cracking behaviour of 7xxx aluminum alloys: a literature review. Trans Nonferr Met Soc China 26(6):1447–1471. https://doi.org/10.1016/S1003-6326(16)64220-610.1016/S1003-6326(16)64220-6 ↗
66. Yang Y, Wu Y, Jin S, Wang D, Zhang S, Zha M (2025) A brief review on stress corrosion cracking of aluminum alloys: mechanisms, prevention, and future perspectives. J Alloys Compd 1037:182430. https://doi.org/10.1016/j.jallcom.2025.18243010.1016/j.jallcom.2025.182430 ↗
67. Cortis D, Campana F, Orlandi D, Sansone S (2023) Strength and fatigue behavior assessment of the SCALMALLOY® material to functionally adapt the performance of L-PBF components within CAE simulations. Prog Addit Manuf 8(5):933–946. https://doi.org/10.1007/s40964-022-00366-810.1007/s40964-022-00366-8 ↗
68. Lagalante I et al (2025) Manufacturing and mechanical behaviour of Scalmalloy® lattice structures: experimental validation and model. Materials 18(15):3479. https://doi.org/10.3390/ma1815347910.3390/ma18153479 ↗
69. Khan MF, Ghiaasiaan R, Gradl PR, Shao S, Shamsaei N (2025) Additively manufactured Scalmalloy via laser powder bed fusion (L‐PBF): temperature‐dependent tensile and fatigue behaviors. Fatigue Fract Eng Mater Struct 48(4):1496–1513. https://doi.org/10.1111/ffe.1454910.1111/ffe.14549 ↗
70. Asapu, S., Gupta, A., & Jha, S. K. (2025). Microstructural and mechanical characterization of selective Laser melted 17-4 PH stainless steel: effect of Laser scan strategy and heat treatment. J Mater Eng Perform, 34(6), 4750- 4764.10.1007/s11665-024-09470-y ↗
71. Kartikeya Sarma I, Selvaraj N, Kumar A (2023) Parametric investigation and characterization of 17-4 PH stainless steel parts fabricated by selective laser melting. J Cent South Univ 30(3):855–870. https://doi.org/10.1007/s11771-022-5150-210.1007/s11771-022-5150-2 ↗
72. Eskandari H, Lashgari HR, Ye L, Eizadjou M, Wang H (2022) Microstructural characterization and mechanical properties of additively manufactured 17–4PH stainless steel. Mater Today Commun 30:103075. https://doi.org/10.1016/j.mtcomm.2021.10307510.1016/j.mtcomm.2021.103075 ↗
73. Rezaei A et al (2020) Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test. Mater Charact 162:110200. https://doi.org/10.1016/j.matchar.2020.11020010.1016/j.matchar.2020.110200 ↗
74. Zhong C, Gasser A, Backes G, Fu J, Schleifenbaum JH (2022) Laser additive manufacturing of Inconel 718 at increased deposition rates. Mater Sci Eng A 844:143196. https://doi.org/10.1016/j.msea.2022.14319610.1016/j.msea.2022.143196 ↗
75. Stegman B et al (2022) Volumetric energy density impact on mechanical properties of additively manufactured 718 Ni alloy. Mater Sci Eng, A 854:143699. https://doi.org/10.1016/j.msea.2022.14369910.1016/j.msea.2022.143699 ↗
76. Tajyar A et al (2022) Effects of a modified heat-treatment on microstructure and mechanical properties of additively manufactured Inconel 718. Mater Sci Eng, A 838:142770. https://doi.org/10.1016/j.msea.2022.14277010.1016/j.msea.2022.142770 ↗
77. Ricci S, Iannitti G (2024) Mechanical behavior of additive manufacturing (AM) and wrought Ti6Al4V with a martensitic microstructure. Metals 14(9):1028. https://doi.org/10.3390/met1409102810.3390/met14091028 ↗
78. Shunmugavel M, Polishetty A, Goldberg M, Singh R, Littlefair G (2017) A comparative study of mechanical properties and machinability of wrought and additive manufactured (selective laser melting) titanium alloy – Ti-6Al-4V. Rapid Prototyp J 23(6):1051–1056. https://doi.org/10.1108/RPJ-08-2015-010510.1108/RPJ-08-2015-0105 ↗
79. Ponnusamy P et al (2021) A study of tensile behavior of SLM processed 17-4 PH stainless steel. Mater Today Proc 45:4531–4534. https://doi.org/10.1016/j.matpr.2020.12.110410.1016/j.matpr.2020.12.1104 ↗
80. B. Kumar, A. K. Sahu, D. Das, and S. Bag (2024) Probing the Thermal Stability and Microstructural-Mechanical Behaviour of Laser-Welded 17-4 PH Stainless Steel, Arch Metall Mater. 775–782, https://doi.org/10.24425/amm.2024.14980910.24425/amm.2024.149809 ↗
81. Vastola G, Zhang G, Pei QX, Zhang Y-W (2016) Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling. Addit Manuf 12:231–239. https://doi.org/10.1016/j.addma.2016.05.01010.1016/j.addma.2016.05.010 ↗
82. Mukherjee T, Manvatkar V, De A, DebRoy T (2017) Mitigation of thermal distortion during additive manufacturing. Scr Mater 127:79–83. https://doi.org/10.1016/j.scriptamat.2016.09.00110.1016/j.scriptamat.2016.09.001 ↗
83. Mirkoohi E, Tran H-C, Lo Y-L, Chang Y-C, Lin H-Y, Liang SY (2021) Mechanics modeling of residual stress considering effect of preheating in laser powder bed fusion. J Manuf Mater Process 5(2):46. https://doi.org/10.3390/jmmp502004610.3390/jmmp5020046 ↗
84. Lu Y et al (2015) Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy. Opt Laser Technol 75:197–206. https://doi.org/10.1016/j.optlastec.2015.07.00910.1016/j.optlastec.2015.07.009 ↗
85. Liu Y, Yang Y, Wang D (2016) A study on the residual stress during selective laser melting (SLM) of metallic powder. Int J Adv Manuf Technol 87(1–4):647–656. https://doi.org/10.1007/s00170-016-8466-y10.1007/s00170-016-8466-y ↗
86. Parry L, Ashcroft IA, Wildman RD (2016) Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation. Addit Manuf 12:1–15. https://doi.org/10.1016/j.addma.2016.05.01410.1016/j.addma.2016.05.014 ↗
87. Park JH, Bang GB, Lee K-A, Son Y, Kim WR, Kim HG (2021) Effect on microstructural and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting with rescanning by low energy density. J Mater Res Technol 10:785–796. https://doi.org/10.1016/j.jmrt.2020.12.05310.1016/j.jmrt.2020.12.053 ↗
88. Pant P et al (2022) A study of the influence of novel scan strategies on residual stress and microstructure of L-shaped LPBF IN718 samples. Mater Des 214:110386. https://doi.org/10.1016/j.matdes.2022.11038610.1016/j.matdes.2022.110386 ↗
89. Shiomi M, Osakada K, Nakamura K, Yamashita T, Abe F (2004) Residual stress within metallic model made by selective laser melting process. CIRP Ann 53(1):195–198. https://doi.org/10.1016/S0007-8506(07)60677-510.1016/S0007-8506(07)60677-5 ↗
90. Mugwagwa L, Dimitrov D, Matope S, Yadroitsev I (2018) Influence of process parameters on residual stress related distortions in selective laser melting. Proc Manuf 21:92–99. https://doi.org/10.1016/j.promfg.2018.02.09910.1016/j.promfg.2018.02.099 ↗
91. Mukherjee T, Zhang W, DebRoy T (2017) An improved prediction of residual stresses and distortion in additive manufacturing. Comput Mater Sci 126:360–372. https://doi.org/10.1016/j.commatsci.2016.10.00310.1016/j.commatsci.2016.10.003 ↗
92. Mugwagwa L, Yadroitsev I, Matope S (2019) Effect of process parameters on residual stresses, distortions, and porosity in selective laser melting of maraging steel 300. Metals 9(10):1042. https://doi.org/10.3390/met910104210.3390/met9101042 ↗
93. Ali H, Ghadbeigi H, Mumtaz K (2018) Effect of scanning strategies on residual stress and mechanical properties of selective laser melted Ti6Al4V. Mater Sci Eng A 712:175–187. https://doi.org/10.1016/j.msea.2017.11.10310.1016/j.msea.2017.11.103 ↗
94. Feng B et al (2022) Effect of laser hatch spacing on the pore defects, phase transformation and properties of selective laser melting fabricated NiTi shape memory alloys. Mater Sci Eng A 840:142965. https://doi.org/10.1016/j.msea.2022.14296510.1016/j.msea.2022.142965 ↗
95. Dong Z, Liu Y, Wen W, Ge J, Liang J (2018) Effect of hatch spacing on melt pool and as-built quality during selective laser melting of stainless steel: modeling and experimental approaches. Materials (Basel) 12(1):50. https://doi.org/10.3390/ma1201005010.3390/ma12010050 ↗
96. Zhao M, Duan C, Luo X (2022) Heat transfer, laser remelting/premelting behavior and metallurgical bonding during selective laser melting of metal powder. Met Mater Int 28(9):2225–2238. https://doi.org/10.1007/s12540-021-01129-w10.1007/s12540-021-01129-w ↗
97. Altpeter I, Dobmann G, Kröning M, Rabung M, Szielasko S (2009) Micro-magnetic evaluation of micro residual stresses of the IInd and IIIrd order. NDT and E Int 42(4):283–290. https://doi.org/10.1016/j.ndteint.2008.11.00710.1016/j.ndteint.2008.11.007 ↗
98. Ilker Yelbay H, Cam I, Hakan Gür C (2010) Non-destructive determination of residual stress state in steel weldments by Magnetic Barkhausen Noise technique. NDT E Int 43(1):29–33. https://doi.org/10.1016/j.ndteint.2009.08.00310.1016/j.ndteint.2009.08.003 ↗
99. Kim S-H, Kim J-B, Lee W-J (2009) Numerical prediction and neutron diffraction measurement of the residual stresses for a modified 9Cr–1Mo steel weld. J Mater Process Technol 209(8):3905–3913. https://doi.org/10.1016/j.jmatprotec.2008.09.01210.1016/j.jmatprotec.2008.09.012 ↗
100. Clapham L, Abdullah K, Jeswiet JJ, Wild PM, Rogge R (2004) Neutron diffraction residual stress mapping in same gauge and differential gauge tailor-welded blanks. J Mater Process Technol 148(2):177–185. https://doi.org/10.1016/S0924-0136(03)00681-210.1016/S0924-0136(03)00681-2 ↗