Flexible and efficient supercapacitor devices based on inkjet-printed Ni–Co layered double hydroxides
Source abstract
Abstract
Abstract This study presents a novel strategy for producing the spinel phase of nickel cobaltite (NiCo 2 O 4 ) by annealing inkjet-printed nickel–cobalt layered double hydroxide (Ni-Co LDH) patterns at 300 °C. The drop-on-demand technique was used to print interdigitated microsupercapacitors (µSCs) in different layers (1, 3, 5, 7, 10, and 15 layers) of Ni-Co LDH ink over a printed 10-layer liquid-phase exfoliated graphene (LPEG) layer on a flexible polyimide substrate. Next, the post-printed Ni-Co LDH@LPEG devices were annealed at 300 °C to obtain a highly durable pseudocapacitive NiCo 2 O 4 . The 7L printed NiCo 2 O 4 @LPEG symmetric electrodes outperformed the LPEG electrodes, demonstrating a higher areal capacitance of 119 F m −2 compared to 3.1 F m −2 . NiCo 2 O 4 showed a longer charge–discharge time, leading to a higher energy density (1.65 mWh m −2 ). An asymmetric planar microsupercapacitor (AµSC) configuration was printed as NiCo 2 O 4 @LPEG//LPEG interdigitated device and tested at a potential window of 1.2 V. The device demonstrated high cyclic stability, retaining 97.4% of its initial capacitance after 2000 cycles. The AµSC demonstrated exceptional flexibility, maintaining a stable retention rate of 98.1% after 2000 cycles at a bending radius of 0.8 cm. For the practical integration, we prepared a laser-induced graphene strain gauge sensor (LIG-SGS) powered by AµSC. The LIG-SGS device has response time of around 300 ms at a 90° bending angle, while LIG-SGS/AµSC has response time of around 200 ms at the same angle. This approach has the potential to inspire fully integrated flexible energy storage systems with exceptional performance for wearable electronics, opening new possibilities for practical applications in the field. Graphical abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Layered Double Hydroxides Synthesis and Applications · Catalysis for Biomass Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. El-Deen AG, Hussein El-Shafei M, Hessein A, Hassanin AH, Shaalan NM, El-Moneim AA (2020) High-performance asymmetric supercapacitor based hierarchical NiCo2O4@ carbon nanofibers//activated multichannel carbon nanofibers. Nanotechnology 31(36):365404. https://doi.org/10.1088/1361-6528/ab97d610.1088/1361-6528/ab97d6 ↗
2. Hussein El-Shafei M, Abdel-Latif MS, Hessein A, El-Moneim AA (2023) Laser-induced carbonization of carbon nanofibers free-standing electrodes for flexible interdigitated micro-supercapacitors. FlatChem. https://doi.org/10.1016/j.flatc.2023.10057010.1016/j.flatc.2023.100570 ↗
3. El-Kady MF, Kaner RB (2013) Scalable fabrication of high-power graphene micro-supercapacitors for flexible and on-chip energy storage. Nat Commun 4:1475. https://doi.org/10.1038/ncomms244610.1038/ncomms2446 ↗
4. El-Basaty AB, Moustafa E, Fouda AN, El-Moneim AA (2020) 3d hierarchical graphene/CNT with interfacial polymerized polyaniline nano-fibers. Spectrochim Acta A Mol Biomol Spectrosc 226:117629. https://doi.org/10.1016/j.saa.2019.11762910.1016/j.saa.2019.117629 ↗
5. Hamed A, Hessein A, El-Moneim AA (2021) Towards high performance flexible planar supercapacitors: in-situ laser scribing doping and reduction of graphene oxide films. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2021.14945710.1016/j.apsusc.2021.149457 ↗
6. Bayoumy AM, Hessein A, Belal MA, Ezzat M, Ibrahim MA, Osman A, El-Moneim AA (2024) Microdrop inkjet printed supercapacitors of graphene/graphene oxide ink for flexible electronics. J Power Sources. https://doi.org/10.1016/j.jpowsour.2024.23514510.1016/j.jpowsour.2024.235145 ↗
7. Hassan S, Suzuki M, El-Moneim AA (2012) Capacitive behavior of manganese dioxide/stainless steel electrodes at different deposition currents. Am J Mater Sci 2(2):11–14. https://doi.org/10.5923/j.materials.20120202.0310.5923/j.materials.20120202.03 ↗
8. Ghoniem E, Mori S, Abdel-Moniem A (2016) Low-cost flexible supercapacitors based on laser reduced graphene oxide supported on polyethylene terephthalate substrate. J Power Sources 324:272–281. https://doi.org/10.1016/j.jpowsour.2016.05.06910.1016/j.jpowsour.2016.05.069 ↗
9. Ghoniem E, Mori S, Abdel-Moniem A (2021) An efficient strategy for transferring carbon nanowalls film to flexible substrate for supercapacitor application. J Power Sources. https://doi.org/10.1016/j.jpowsour.2021.22968410.1016/j.jpowsour.2021.229684 ↗
10. Madbouly A, Elzwawy A, Morsy M (2024) Rapid CO detection using MWCNTs/SnO2 hierarchical structure: synthesis, characterization, and RT gas sensing features. Ceram Int 50(14):25473–25483. https://doi.org/10.1016/j.ceramint.2024.04.28010.1016/j.ceramint.2024.04.280 ↗
11. Rashed AE, El-Moneim AA (2017) Two steps synthesis approach of MnO2/graphene nanoplates/graphite composite electrode for supercapacitor application. Mater Today Energy 3:24–31. https://doi.org/10.1016/j.mtener.2017.02.00410.1016/j.mtener.2017.02.004 ↗
12. Giannakou P, Tas MO, Le Borgne B, Shkunov M (2020) Water-transferred, inkjet-printed supercapacitors toward conformal and epidermal energy storage. ACS Appl Mater Interfaces 12(7):8456–8465. https://doi.org/10.1021/acsami.9b2128310.1021/acsami.9b21283 ↗
13. Hassan S, Suzuki M, El-Moneim AA (2014) Synthesis of MnO2–chitosan nanocomposite by one-step electrodeposition for electrochemical energy storage application. J Power Sources 246:68–73. https://doi.org/10.1016/j.jpowsour.2013.06.08510.1016/j.jpowsour.2013.06.085 ↗
14. Ahmed HE, Albolkany MK, El-Khouly ME, El-Moneim AA (2024) Tailoring MIL-100(Fe)-derived catalyst for controlled carbon dioxide conversion and product selectivity. RSC Adv 14(20):13946–13956. https://doi.org/10.1039/d4ra01772b10.1039/d4ra01772b ↗
15. Ahmed HE, Rashed AE, El-Khouly ME, Albolkany MK, El-Moneim AA (2023) Green approach for sustainable production of paraffin fuel from CO2 hydrogenation on Fe-MOF catalyst. J Environ Chem Eng. https://doi.org/10.1016/j.jece.2023.11107110.1016/j.jece.2023.111071 ↗
16. S C, Upadhyay S, Joshi NC, Kumar N, Choudhary P, Sharma N, Thakur VN (2023) A facile supercritical fluid synthesis of cobalt sulfide integrated with MXENE and PANI/PEDOT nanocomposites as electrode material for supercapacitor applications. FlatChem. https://doi.org/10.1016/j.flatc.2022.10045610.1016/j.flatc.2022.100456 ↗
17. El-Shafei MH, Ghoniem E, Hassanin A, El-Moneim AA (2017) Novel technique for producing porous carbon nanofiber mate for supercapacitors application. Key Eng Mat 735:199–204. https://doi.org/10.4028/www.scientific.net/KEM.735.19910.4028/www.scientific.net/KEM.735.199 ↗
18. Belal MA, Yousry R, Taulo G, AbdelHamid AA, Rashed AE, El-Moneim AA (2023) Layer-by-layer inkjet-printed manganese oxide nanosheets on graphene for high-performance flexible supercapacitors. ACS Appl Mater Interfaces 15(46):53632–53643. https://doi.org/10.1021/acsami.3c0733910.1021/acsami.3c07339 ↗
19. Belal MA, Khalil HH, Mahajan RL, Rashed AE, Khattab SN, El-Moneim AA (2024) Layered structure design of inkjet-printed graphene/Co3O4 for high-performance flexible microsupercapacitors. J Energy Storage. https://doi.org/10.1016/j.est.2024.11390010.1016/j.est.2024.113900 ↗
20. Xu S, Dall’Agnese Y, Wei G, Zhang C, Gogotsi Y, Han W (2018) Screen-printable microscale hybrid device based on MXene and layered double hydroxide electrodes for powering force sensors. Nano Energy 50:479–488. https://doi.org/10.1016/j.nanoen.2018.05.06410.1016/j.nanoen.2018.05.064 ↗
21. Gao C, Huang J, Xiao Y, Zhang G, Dai C, Li Z, Zhao Y, Jiang L, Qu L (2021) A seamlessly integrated device of micro-supercapacitor and wireless charging with ultrahigh energy density and capacitance. Nat Commun 12(1):2647. https://doi.org/10.1038/s41467-021-22912-810.1038/s41467-021-22912-8 ↗
22. Chang P, Mei H, Zhou S, Dassios KG, Cheng L (2019) 3D printed electrochemical energy storage devices. J Mater Chem A 7(9):4230–4258. https://doi.org/10.1039/c8ta11860d10.1039/c8ta11860d ↗
23. Ezzat M, Rashed AE, Sabra SA, Haroun M, El-Moneim AA (2023) Fully inkjet-printed graphene/gold nonenzymatic biosensor for glucose detection. Mater Today Commun. https://doi.org/10.1016/j.mtcomm.2023.10754910.1016/j.mtcomm.2023.107549 ↗
24. Priyadarsini SS, Saxena S, Ladole AH, Nehru D, Dasgupta S (2023) Inkjet-printed transparent asymmetric microsupercapacitors with mesoporous NiCo2O4 and Mn2O3 electrodes. ACS Appl Energy Mater 7(2):715–725. https://doi.org/10.1021/acsaem.3c0279810.1021/acsaem.3c02798 ↗
25. Taulo GT, Shaalan NM, Mohamed GG, Ayad MM, El-Moneim AA (2024) Inkjet printing of SnO2 nanoparticles with exposed high-energy facets for CO gas sensing. Ceram Int 50(11):18638–18646. https://doi.org/10.1016/j.ceramint.2024.02.35210.1016/j.ceramint.2024.02.352 ↗
26. Li L, Secor EB, Chen KS, Zhu J, Liu X, Gao TZ, Seo JWT, Zhao Y, Hersam MC (2016) High-performance solid-state supercapacitors and microsupercapacitors derived from printable graphene inks. Adv Energy Mater 6:20. https://doi.org/10.1002/aenm.20160090910.1002/aenm.201600909 ↗
27. Li J, Sollami Delekta S, Zhang P, Yang S, Lohe MR, Zhuang X, Feng X, Ostling M (2017) Scalable fabrication and integration of graphene microsupercapacitors through full inkjet printing. ACS Nano 11(8):8249–8256. https://doi.org/10.1021/acsnano.7b0335410.1021/acsnano.7b03354 ↗
28. Sundriyal P, Bhattacharya S (2019) Scalable micro-fabrication of flexible, solid-state, inexpensive, and high-performance planar micro-supercapacitors through inkjet printing. ACS Appl Energy Mater 2(3):1876–1890. https://doi.org/10.1021/acsaem.8b0200610.1021/acsaem.8b02006 ↗
29. Wang Y, Zhang Y-Z, Gao Y-Q, Sheng G, ten Elshof JE (2020) Defect engineering of MnO2 nanosheets by substitutional doping for printable solid-state micro-supercapacitors. Nano Energy. https://doi.org/10.1016/j.nanoen.2019.10430610.1016/j.nanoen.2019.104306 ↗
30. Kim N, Hwang S, Panda S, Hajra S, Jo J, Song H, Belal MA, Vivekananthan V, Panigrahi BK, Achary PGR, Kim HJ (2024) A sustainable free-standing triboelectric nanogenerator made of flexible composite film for brake pattern recognition in automobiles. Macromol Rapid Commun 45(20):e2400431. https://doi.org/10.1002/marc.20240043110.1002/marc.202400431 ↗
31. Rosa M, Costa Bassetto V, Girault HH, Lesch A, Esposito V (2019) Assembling Ni–Fe layered double hydroxide 2D thin films for oxygen evolution electrodes. ACS Appl Energy Mater 3(1):1017–1026. https://doi.org/10.1021/acsaem.9b0205510.1021/acsaem.9b02055 ↗
32. Banti A, Charalampakis M, Pardalis P, Prochaska C, Sotiropoulos S, Binas V (2023) Electrochemical studies of inkjet printed semi-transparent NiCo2O4/ito supercapacitor electrodes. Catalysts. https://doi.org/10.3390/catal1307111010.3390/catal13071110 ↗
33. Liu H, Xiang H, Li Z, Meng Q, Li P, Ma Y, Zhou H, Huang W (2019) Flexible and degradable multimodal sensor fabricated by transferring laser-induced porous carbon on starch film. ACS Sustain Chem Eng 8(1):527–533. https://doi.org/10.1021/acssuschemeng.9b0596810.1021/acssuschemeng.9b05968 ↗
34. Deshmukh R, Mehra A, Thaokar R (2017) Formation and shape-control of hierarchical cobalt nanostructures using quaternary ammonium salts in aqueous media. Beilstein J Nanotechnol 8:494–505. https://doi.org/10.3762/bjnano.8.5310.3762/bjnano.8.53 ↗
35. Rahim AHA, Majid SR (2023) Ni/Co-based zeolitic-imidazolate framework pseudocapacitance in asymmetrical cells. J Appl Electrochem 53(9):1727–1737. https://doi.org/10.1007/s10800-023-01888-x10.1007/s10800-023-01888-x ↗
36. Balayeva OO, Azizov AA, Muradov MB, Alosmanov RM, Eyvazova GM, Mammadyarova SJ (2019) Cobalt chromium-layered double hydroxide, alpha- and beta- Co(OH)2 and amorphous Cr(OH)3: synthesis, modification and characterization. Heliyon 5(11):e02725. https://doi.org/10.1016/j.heliyon.2019.e0272510.1016/j.heliyon.2019.e02725 ↗
37. Dileep NP, Vineesh TV, Sarma PV, Chalil MV, Prasad CS, Shaijumon MM (2020) Electrochemically exfoliated β-co(oh)2 nanostructures for enhanced oxygen evolution electrocatalysis. ACS Appl Energy Mater 3(2):1461–1467. https://doi.org/10.1021/acsaem.9b0190110.1021/acsaem.9b01901 ↗
38. Kai K, Yoshida Y, Kageyama H, Saito G, Ishigaki T, Furukawa Y, Kawamata J (2008) Room-temperature synthesis of manganese oxide monosheets. J Am Chem Soc 130(47):15938–15943. https://doi.org/10.1021/ja804503f10.1021/ja804503f ↗
39. Jin L, Zhou X, Wang F, Ning X, Wen Y, Song B, Yang C, Wu D, Ke X, Peng L (2022) Insights into memory effect mechanisms of layered double hydroxides with solid-state NMR spectroscopy. Nat Commun 13(1):6093. https://doi.org/10.1038/s41467-022-33912-710.1038/s41467-022-33912-7 ↗
40. Mallakpour S, Radfar Z, Hussain CM (2021) Current advances on polymer-layered double hydroxides/metal oxides nanocomposites and bionanocomposites: fabrications and applications in the textile industry and nanofibers. Appl Clay Sci. https://doi.org/10.1016/j.clay.2021.10605410.1016/j.clay.2021.106054 ↗
41. Fernandes Júnior AJS, Sodré WC, Soares BECF, Bezerra CWB, Rojas A, Perez-Carvajal J, Alcântara ACS (2021) In situ assembling of layered double hydroxide to magadiite layered silicate with enhanced photocatalytic and recycling performance. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2021.15100710.1016/j.apsusc.2021.151007 ↗
42. Sun Z, Shu D, Lv C, Zhang Q, He C, Tian S (2013) Fabrication and supercapacitive behavior of tetramethylammonium ion-intercalated mno2 prepared by an exfoliation and self-assembly process. J Alloys Compd 569:136–143. https://doi.org/10.1016/j.jallcom.2013.03.19510.1016/j.jallcom.2013.03.195 ↗
43. Shamsayei M, Yamini Y, Asiabi H (2020) Layer-by-layer assembly of layered double hydroxide/histidine/δ-MnO2 nanosheets: synthesis, characterization, and applications. Appl Clay Sci. https://doi.org/10.1016/j.clay.2020.10554010.1016/j.clay.2020.105540 ↗
44. Ikhuoria EU, Omorogbe SO, Sone BT, Maaza M (2018) Bioinspired shape controlled antiferromagnetic Co3O4 with prism like-anchored octahedron morphology: a facile green synthesis using manihot esculenta crantz extract. Sci Technol Mater 30(2):92–98. https://doi.org/10.1016/j.stmat.2018.02.00310.1016/j.stmat.2018.02.003 ↗
45. Kang MJ, Park H, Jegal J, Hwang SY, Kang YS, Cha HG (2019) Electrocatalysis of 5-hydroxymethylfurfural at cobalt based spinel catalysts with filamentous nanoarchitecture in alkaline media. Appl Catal B Environ 242:85–91. https://doi.org/10.1016/j.apcatb.2018.09.08710.1016/j.apcatb.2018.09.087 ↗
46. Li X, Zhao Y, Yu J, Liu Q, Chen R, Zhang H, Song D, Liu J, Wang J (2020) Layer by layer inkjet printing reduced graphene oxide film supported nickel cobalt layered double hydroxide as a binder-free electrode for supercapacitors. Appl Surf Sci. https://doi.org/10.1016/j.apsusc.2019.14487210.1016/j.apsusc.2019.144872 ↗
47. Xia P, Wang Q, Wang Y, Quan W, Jiang D, Chen M (2019) Hierarchical NiCo2O4@Ni(OH)2 core-shell nanoarrays as advanced electrodes for asymmetric supercapacitors with high energy density. J Alloys Compd 771:784–792. https://doi.org/10.1016/j.jallcom.2018.08.16310.1016/j.jallcom.2018.08.163 ↗
48. Wu Z, Zhu Y, Ji X (2014) NiCo2O4-based materials for electrochemical supercapacitors. J Mater Chem A 2(36):14759–14772. https://doi.org/10.1039/c4ta02390k10.1039/c4ta02390k ↗
49. Zhao L, Li Y, Yu M, Peng Y, Ran F (2023) Electrolyte-wettability issues and challenges of electrode materials in electrochemical energy storage, energy conversion, and beyond. Adv Sci 10(17):e2300283. https://doi.org/10.1002/advs.20230028310.1002/advs.202300283 ↗
50. Elsonbaty A, Harb M, Soliman M, Ebrahim S, Eltahan A (2021) Metal organic framework/layer double hydroxide/graphene oxide nanocomposite supercapacitor electrode. Appl Phys Lett. https://doi.org/10.1063/5.003031110.1063/5.0030311 ↗
51. Kaur M, Chand P, Anand H (2022) Facile synthesis of NiCo2O4 nanostructure with enhanced electrochemical performance for supercapacitor application. Chem Phys Lett. https://doi.org/10.1016/j.cplett.2021.13918110.1016/j.cplett.2021.139181 ↗
52. Abbas Q, Khurshid H, Yoosuf R, Lawrence J, Issa BA, Abdelkareem MA, Olabi AG (2023) Engineering of nickel, cobalt oxides and nickel/cobalt binary oxides by electrodeposition and application as binder free electrodes in supercapacitors. Sci Rep 13(1):15654. https://doi.org/10.1038/s41598-023-42647-410.1038/s41598-023-42647-4 ↗
53. Zhang J, Dong L, Xu C, Hao J, Kang F, Li J (2017) Comprehensive approaches to three-dimensional flexible supercapacitor electrodes based on MnO2/carbon nanotube/activated carbon fiber felt. J Mater Sci 52(10):5788–5798. https://doi.org/10.1007/s10853-017-0813-310.1007/s10853-017-0813-3 ↗
54. Ma Y, Yang C, Liang E, Wang G-X, Zhou N, Xu Y, Wang W (2022) Facile synthesis of ultra-tensile hydrogels for flexible all-solid-state supercapacitor energy storage devices. J Sol-Gel Sci Techn 103(2):335–344. https://doi.org/10.1007/s10971-022-05833-w10.1007/s10971-022-05833-w ↗
55. Martin GD, Price WC, Hutchings IM (2016) Measurement of inkjet drop volume-the role of image processing. J Imaging Sci Technol 60(4):040401–040401-040401-040409. https://doi.org/10.2352/J.ImagingSci.Technol.2016.60.4.04040110.2352/J.ImagingSci.Technol.2016.60.4.040401 ↗
56. Abushrenta N, Wu X, Wang J, Liu J, Sun X (2015) Hierarchical co-based porous layered double hydroxide arrays derived via alkali etching for high-performance supercapacitors. Sci Rep 5:13082. https://doi.org/10.1038/srep1308210.1038/srep13082 ↗
57. Wang Y, Zhang Y-Z, Dubbink D, ten Elshof JE (2018) Inkjet printing of δ-MnO2 nanosheets for flexible solid-state micro-supercapacitor. Nano Energy 49:481–488. https://doi.org/10.1016/j.nanoen.2018.05.00210.1016/j.nanoen.2018.05.002 ↗
58. Gaur APS, Xiang W, Nepal A, Wright JP, Chen P, Nagaraja T, Sigdel S, LaCroix B, Sorensen CM, Das SR (2021) Graphene aerosol gel ink for printing micro-supercapacitors. ACS Appl Energ Mater 4(8):7632–7641. https://doi.org/10.1021/acsaem.1c0091910.1021/acsaem.1c00919 ↗
59. Xia Z, Mishukova V, Sollami Delekta S, Sun J, Sanchez JS, Li J, Palermo V (2021) Selective deposition of metal oxide nanoflakes on graphene electrodes to obtain high-performance asymmetric micro-supercapacitors. Nanoscale 13(5):3285–3294. https://doi.org/10.1039/d0nr07076a10.1039/d0nr07076a ↗
60. Sajedi-Moghaddam A, Gholami M, Naseri N (2023) Inkjet printing of MnO2 nanoflowers on surface-modified A4 paper for flexible all-solid-state microsupercapacitors. ACS Appl Mater Interfaces 15(3):3894–3903. https://doi.org/10.1021/acsami.2c0893910.1021/acsami.2c08939 ↗
61. Bräuniger Y, Lochmann S, Grothe J, Hantusch M, Kaskel S (2021) Piezoelectric inkjet printing of nanoporous carbons for micro-supercapacitor devices. ACS Appl Energ Mater 4(2):1560–1567. https://doi.org/10.1021/acsaem.0c0274510.1021/acsaem.0c02745 ↗
62. Chaney LE, Hyun WJ, Khalaj M, Hui J, Hersam MC (2024) Fully printed, high-temperature micro-supercapacitor arrays enabled by a hexagonal boron nitride ionogel electrolyte. Adv Mater 36(52):e2305161. https://doi.org/10.1002/adma.20230516110.1002/adma.202305161 ↗
63. Li W, Xu X, Liu C, Tekell MC, Ning J, Guo J, Zhang J, Fan D (2017) Ultralight and binder‐free all‐solid‐state flexible supercapacitors for powering wearable strain sensors. Adv Funct Mater. https://doi.org/10.1002/adfm.20170273810.1002/adfm.201702738 ↗
64. Xu T, Song Q, Liu K, Liu H, Pan J, Liu W, Dai L, Zhang M, Wang Y, Si C, Du H, Zhang K (2023) Nanocellulose-assisted construction of multifunctional MXene-based aerogels with engineering biomimetic texture for pressure sensor and compressible electrode. Nano-Micro Lett 15(1):98. https://doi.org/10.1007/s40820-023-01073-x10.1007/s40820-023-01073-x ↗
65. liu H, Jiang H, Du F, Zhang D, Li Z, Zhou H (2017) Flexible and degradable paper-based strain sensor with low cost. ACS Sustain Chem Eng 5(11):10538–10543. https://doi.org/10.1021/acssuschemeng.7b0254010.1021/acssuschemeng.7b02540 ↗
66. Wang Z, Qi J, Yan X, Zhang Q, Wang Q, Lu S, Lin P, Liao Q, Zhang Z, Zhang Y (2013) A self-powered strain senor based on a ZnO/PEDOT:PSS hybrid structure. RSC Adv 3(38):17011–17015. https://doi.org/10.1039/c3ra42778a10.1039/c3ra42778a ↗
67. Sun K, Qi J, Zhang Q, Yang Y, Zhang Y (2011) A novel logic switch based on individual ZnO nanotetrapods. Nanoscale 3(5):2166–2168. https://doi.org/10.1039/c1nr10115c10.1039/c1nr10115c ↗
68. Ramuz M, Tee BC, Tok JB, Bao Z (2012) Transparent, optical, pressure-sensitive artificial skin for large-area stretchable electronics. Adv Mater 24(24):3223–3227. https://doi.org/10.1002/adma.20120052310.1002/adma.201200523 ↗