journal article·2026-01

Study on the microstructure, microhardness and tribological behavior of copper/steel bimetallic composite prepared by liquid–solid compound casting

Guowei Zhang, Zhenhua Shi, Yougui Zhang, Zhaojie Wang, Licheng Zhao, Yuan Chang, Hong Xu, Xiaoyan Ren

Journal of Materials Science· Volume 61· Issue 1
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Metallurgy and Material Science · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Haidak G, Wang D, Shiju E et al (2018) Study of the influence of slipper parameters on the power efficiency of axial piston pumps. Adv Mech Eng 2018:9. https://doi.org/10.1177/168781401880146010.1177/1687814018801460 ↗
2. Yang X, Jiang A, Jiang W et al (2024) small-sample fault diagnosis of axial piston pumps across working conditions, based on 1D-SENet model migration. J Mar Sci Eng 12(8):1430. https://doi.org/10.3390/jmse1208143010.3390/jmse12081430 ↗
3. Zhao Ja FuY, Ma J et al (2021) Review of cylinder block/valve plate interface in axial piston pumps: Theoretical models, experimental investigations, and optimal design. Chinese J Aeronaut 34(1):111–134. https://doi.org/10.1016/j.cja.2020.09.03010.1016/j.cja.2020.09.030 ↗
4. Li Z, Xu S, Gong G et al (2022) Study on friction characteristics of slipper pair of large displacement high-pressure piston pump. Lubricants 10(12):363. https://doi.org/10.3390/lubricants1012036310.3390/lubricants10120363 ↗
5. Jiang JH, Wang ZB, Wang KL (2018) Power loss of slipper/swashplate based on elastohydrodynamic Lubrication model in axial piston pump. In: IOP Conf. Ser.: Earth Environ. Sci. 188 1 012025 https://doi.org/10.1088/1755-1315/188/1/01202510.1088/1755-1315/188/1/012025 ↗
6. Liu S, Li Z, Sun W et al (2023) A mixed lubrication model for predicting the lubrication performance degradation behavior of slipper pair in early wear failure. IEEE Access 11:100479–100494. https://doi.org/10.1109/ACCESS.2023.331512410.1109/ACCESS.2023.3315124 ↗
7. Zhou J, Zhou J, Jing C (2020) Experimental Research on the Dynamic Lubricating Performance of Slipper/Swash Plate Interface in Axial Piston Pumps. Chin J Mech Eng-En 33(1):25. https://doi.org/10.1186/s10033-020-00441-710.1186/s10033-020-00441-7 ↗
8. D’Andrea D, Epasto G, Bonanno A et al (2019) Failure analysis of anti-friction coating for cylinder blocks in axial piston pumps. Eng Fall Anal 104:126–138. https://doi.org/10.1016/j.engfailanal.2019.05.04110.1016/j.engfailanal.2019.05.041 ↗
9. Wu J, Ma L, An G et al (2023) Squeeze film effect and its influence on the lubrication characteristics of slipper oil film under pressure pulse. Shock Vib. https://doi.org/10.1155/2023/273117610.1155/2023/2731176 ↗
10. Liu S, Zhang Y, Ai C et al (2023) A new test method for simulating wear failure of hydraulic pump slipper pair under high-speed and high-pressure conditions. Front Energy Res. https://doi.org/10.3389/fenrg.2022.109663310.3389/fenrg.2022.1096633 ↗
11. Wang H, Shi G (2021) Lubrication characteristics of the worn slipper in the slipper-swashplate pair. Ind Lubr Tribol 73(7):1037–1044. https://doi.org/10.1108/ilt-07-2021-024110.1108/ilt-07-2021-0241 ↗
12. Hashemi S, Friedrich H, Bobach L et al (2017) Validation of a thermal elastohydrodynamic multibody dynamics model of the slipper pad by friction force measurement in the axial piston pump. Tribol Int 115:319–337. https://doi.org/10.1016/j.triboint.2017.05.01310.1016/j.triboint.2017.05.013 ↗
13. Zhang C, Huang S, Du J et al (2016) A new dynamic seven-stage model for thickness prediction of the film between valve plate and cylinder block in axial piston pumps. Adv Mech Eng 2016:9. https://doi.org/10.1177/168781401667144610.1177/1687814016671446 ↗
14. Jiang J, Wang Z, Li G (2020) The impact of slipper microstructure on slipper-swashplate lubrication interface in axial piston pump. IEEE Access 8:222865–222875. https://doi.org/10.1109/ACCESS.2020.304408110.1109/ACCESS.2020.3044081 ↗
15. Tang H, Ren Y, Xiang J (2017) A novel model for predicting thermoelastohydrodynamic lubrication characteristics of slipper pair in axial piston pump. Int J Mech Sci 124–125:109–121. https://doi.org/10.1016/j.ijmecsci.2017.03.01010.1016/j.ijmecsci.2017.03.010 ↗
16. Meng X, Ge C, Liang H et al (2020) Lubrication characteristics of the slipper–swash-plate interface in a swash-plate-type axial piston pump. Proc Inst Mech Eng C J Mech Eng Sci 235(4):639–651. https://doi.org/10.1177/095440622093294410.1177/0954406220932944 ↗
17. Xu B, Zhang J, Yang H (2012) Investigation on structural optimization of anti-overturning slipper of axial piston pump. Sci China Technol Sci 55(11):3010–3018. https://doi.org/10.1007/s11431-012-4955-x10.1007/s11431-012-4955-x ↗
18. Tang H-s, Ren Y, Zhang X-l (2020) Tribological performance of MoS2 coating on slipper pair in axial piston pump. J Cent South Univ 27(5):1515–1529. https://doi.org/10.1007/s11771-020-4387-x10.1007/s11771-020-4387-x ↗
19. Srichen A, Moonngam S, Linjee S et al (2022) Tribological behaviors of arc sprayed NiCrMoAl alloy coating after heat treatments. Surf Coat Technol 437:128325. https://doi.org/10.1016/j.surfcoat.2022.12832510.1016/j.surfcoat.2022.128325 ↗
20. Hong Y-S, Lee S-R, Kim J-H et al (2015) Application of a DLC-coating for improving hydrostatic piston shoe bearing performance under mixed friction conditions. Int J Precis Eng Manuf 16(2):335–341. https://doi.org/10.1007/s12541-015-0044-y10.1007/s12541-015-0044-y ↗
21. Liang Y, Wang C, Zhang Z et al (2023) Simulation Study on Bearing Lubrication Mechanism and Friction Characteristics of the Biomimetic Non-Smooth Surface of a Cross-Scale Second-Order Compound Microstructure. Lubricants 11(2):77. https://doi.org/10.3390/lubricants1102007710.3390/lubricants11020077 ↗
22. Wang H, Lin N, Yuan S et al (2024) Structural improvement, material selection and surface treatment for improved tribological performance of friction pairs in axial piston pumps: a review. Tribol Int 198:109838. https://doi.org/10.1016/j.triboint.2024.10983810.1016/j.triboint.2024.109838 ↗
23. Thomson J, Zavadil R, Sahoo M et al (2010) Development of a lead-free bearing material for aerospace applications. Int J Metalcast 4(1):19–30. https://doi.org/10.1007/BF0335548310.1007/BF03355483 ↗
24. Zhang Y, Shi Z, Wang Z et al (2025) Study on the bonding mechanism and performance optimization of Cu-12Sn-2Ni/42CrMo bimetallic interface controlled by Ag doping. J Mater Res Technol 38:3277–3290. https://doi.org/10.1016/j.jmrt.2025.08.18510.1016/j.jmrt.2025.08.185 ↗
25. Chen K, Zhang J, Chen X et al (2020) The effect of iron on the microstructure and mechanical properties of a cast Cu–12Sn-1.5Ni (wt. %) alloy. Mater Sci Eng A 785:139330. https://doi.org/10.1016/j.msea.2020.13933010.1016/j.msea.2020.139330 ↗
26. Wu H, Zhao L, Ni S et al (2020) Study on friction performance and mechanism of slipper pair under different paired materials in high-pressure axial piston pump. Friction 8(5):957–969. https://doi.org/10.1007/s40544-019-0314-210.1007/s40544-019-0314-2 ↗
27. kadhim HA, Abed IJ (2021) Investigation wear behaviour of tin bronze alloy prepared by different casting techniques. In: IOP Conf Ser Mater Sci Eng. 1094 1 012126 https://doi.org/10.1088/1757-899X/1094/1/01212610.1088/1757-899X/1094/1/012126 ↗
28. Wang Z, Zhang G, Kang Y et al (2022) The effect of Y on the microstructure, mechanical and wear properties of ZCuSn10Pb10 alloy. Materials 15(3):1047. https://doi.org/10.3390/ma1503104710.3390/ma15031047 ↗
29. Ren X, Shi Z, Zhang G et al (2024) Strengthening mechanism of sub-nano Ni3P and Cu3P phases particles on the Pb–Sn bronze alloy. Heliyon. https://doi.org/10.1016/j.heliyon.2024.e3462410.1016/j.heliyon.2024.e34624 ↗
30. Adineh M, Doostmohammadi H (2019) Microstructure, mechanical properties and machinability of Cu–Zn–Mg and Cu–Zn–Sb brass alloys. Mater Sci Technol 35(12):1504–1514. https://doi.org/10.1080/02670836.2019.163008910.1080/02670836.2019.1630089 ↗
31. Kang Y, Zhang G, Wang Z et al (2022) Effect of two-stage cooling on the microstructure and tribological properties of steel-copper bimetals. Materials 15(2):492. https://doi.org/10.3390/ma1502049210.3390/ma15020492 ↗
32. Zhang S, Zhao B, Liu Y (2024) Coupling effect of plastic deformation and surface roughness on friction behaviors of rough line contact for ground metal surfaces. Tribol Int 193:109338. https://doi.org/10.1016/j.triboint.2024.10933810.1016/j.triboint.2024.109338 ↗
33. Wu J, Cui J, Shu W et al (2023) Elastohydrodynamic lubrication model and failure test for micro-contact thermodynamic characteristics of friction interface. Tribol Int 185:108499. https://doi.org/10.1016/j.triboint.2023.10849910.1016/j.triboint.2023.108499 ↗
34. Upadhyaya A, Mishra NS, Ojha SN (1997) Microstructural control by spray forming and wear characteristics of a Babbit alloy. J Mater Sci 32(12):3227–3235. https://doi.org/10.1023/A:101866712135710.1023/A:1018667121357 ↗
35. Mohan S, Agarwala V, Ray S (1992) Friction characteristics of stir-cast Al-Pb alloys. Wear 157(1):9–17. https://doi.org/10.1016/0043-1648(92)90184-A10.1016/0043-1648(92)90184-A ↗
36. Pathak JP, Tiwari SN (1992) On the mechanical and wear properties of copper-lead bearing alloys. Wear 155(1):37–47. https://doi.org/10.1016/0043-1648(92)90107-J10.1016/0043-1648(92)90107-J ↗
37. Li Z, Zhao G, Wang H et al (2021) Microstructure and tribological behaviors of diffusion bonded powder sintered Cu–Sn based alloys. Mater Res Express 8(11):116505. https://doi.org/10.1088/2053-1591/ac31ff10.1088/2053-1591/ac31ff ↗
38. Ruusila V, Nyyssönen T, Kallio M et al (2013) The effect of microstructure and lead content on the tribological properties of bearing alloys. Pro Inst Mech Eng Part J J Eng Tribol 227(8):878–887. https://doi.org/10.1177/135065011347870610.1177/1350650113478706 ↗
39. Schell J, Heilmann P, Rigney DA (1982) Friction and wear of Cu-Ni alloys. Wear 75(2):205–220. https://doi.org/10.1016/0043-1648(82)90149-110.1016/0043-1648(82)90149-1 ↗
40. Li Z, Wang H, Zhao G et al (2023) The effect of nickel-induced finite plasticity on the tribological behavior and wear resistance of Cu-Sn-Bi alloy. Tribol Int 188:108909. https://doi.org/10.1016/j.triboint.2023.10890910.1016/j.triboint.2023.108909 ↗
41. Dong BW, Wang SH, Dong ZZ et al (2020) Novel insight into dry sliding behavior of Cu-Pb-Sn in-situ composite with secondary phase in different morphology. J Mater Sci Technol 40:158–167. https://doi.org/10.1016/j.jmst.2019.09.02510.1016/j.jmst.2019.09.025 ↗