journal article·2025-12Open access

Effect of borosilicate glass environment on creep behaviour of alloy 690 at temperatures over 800–1000 °C

M. Karri, A. Verma, J. B. Singh, C. V. Singh

Journal of Materials Science· Volume 60· Issue 48

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. Singh JB, Verma A, Paul B, Chakravartty JK (2013) "Failure of Alloy 625 tube stub ends–Effect of primary nitrides. Eng Fail Anal 32:236. https://doi.org/10.1016/j.engfailanal.2013.03.01810.1016/j.engfailanal.2013.03.018 ↗
2. Kai JJ, Yu GP, Tsai CH, Liu MN, Yao SC (1989) The effects of heat treatment on the chromium depletion, precipitate evolution, and corrosion resistance of INCONEL alloy 690. Metall Trans A 20:2057. https://doi.org/10.1007/BF02650292/METRICS10.1007/BF02650292/METRICS ↗
3. Harrod DL, Gold RE, Jacko RJ (2001) Alloy optimization for PWR steam generator heat-transfer tubing. JOM 53:14. https://doi.org/10.1007/S11837-001-0080-110.1007/S11837-001-0080-1 ↗
4. Kim UC, Kim KM, Lee EH (2005) Effects of chemical compounds on the stress corrosion cracking of steam generator tubing materials in a caustic solution. J Nucl Mater 341:169. https://doi.org/10.1016/J.JNUCMAT.2005.01.01810.1016/J.JNUCMAT.2005.01.018 ↗
5. Andresen PL, Morra MM (2008) Stress corrosion cracking of stainless steels and nickel alloys in high-temperature water. Corrosion 64:15. https://doi.org/10.5006/1.327845710.5006/1.3278457 ↗
6. Special Metals Corporation, Special Metals. Inconel® alloy 690 (UNS N06690, W.Nr. 2.4642) (Ni 61.5, Cr 29.0, Fe 9.0), 2009. https://doi.org/10.31399/asm.ad.ni0266.10.31399/asm.ad.ni0266 ↗
7. Kim DJ, Kim HP, Hwang SS (2013) Susceptibility of Alloy 690 to stress corrosion cracking in caustic aqueous solutions. Nucl Eng Technol 45:67. https://doi.org/10.5516/NET.07.2012.02110.5516/NET.07.2012.021 ↗
8. Zhong X, Han EH, Wu X (2013) Corrosion behavior of Alloy 690 in aerated supercritical water. Corros Sci 66:369. https://doi.org/10.1016/J.CORSCI.2012.10.00110.1016/J.CORSCI.2012.10.001 ↗
9. Majumdar S (1999) Prediction of structural integrity of steam generator tubes under severe accident conditions. Nucl Eng Des 194:31. https://doi.org/10.1016/S0029-5493(99)00168-510.1016/S0029-5493(99)00168-5 ↗
10. Sengupta P, Kaushik CP, Mishra RK, Kale GB (2007) J Am Ceram Soc 90:3057. https://doi.org/10.1111/j.1551-2916.2007.01853.x10.1111/j.1551-2916.2007.01853.x ↗
11. Sengupta P, Kaushik CP, Kale GB, Das D, Raj K, Sharma BP (2009) Evaluation of alloy 690 process pot at the contact with borosilicate melt pool during vitrification of high-level nuclear waste. J Nucl Mater 392:379. https://doi.org/10.1016/j.jnucmat.2008.07.04610.1016/j.jnucmat.2008.07.046 ↗
12. Yusufali C, Kshirsagar RJ, Halder R, Abraham GJ, Mishra RK, Kaushik CP, Dey GK (2015) Surface studies on aluminized and thermally oxidized Alloy 690 substrates interacted with nitrate-based simulated nuclear waste and sodium borosilicate melt using Raman spectroscopy and X-ray photoelectron spectroscopy. Surf Coat Technol 266:31. https://doi.org/10.1016/J.SURFCOAT.2015.02.00910.1016/J.SURFCOAT.2015.02.009 ↗
13. Sourabh K, Singh JB (2022) Creep behaviour of alloy 690 in the temperature range 800–1000°C. J Mater Res Technol 17:1553. https://doi.org/10.1016/J.JMRT.2022.01.06010.1016/J.JMRT.2022.01.060 ↗
14. Karri M, Verma A, Singh JB (2025) The influence of initial microstructure on interaction behaviour of Alloy 693 in borosilicate glass melt. Corros Sci 250:112868. https://doi.org/10.1016/J.CORSCI.2025.11286810.1016/J.CORSCI.2025.112868 ↗
15. V. Venkatesh, Ultra-high temperature mechanical performance of INCONEL 690, Clemson University, 1998
16. Venkatesh V, Rack HJ (1999) Influence of microstructural instabilities on elevated temperature creep deformation of Inconel* 690. Mater Sci Technol 15:408. https://doi.org/10.1179/02670839910150603010.1179/026708399101506030 ↗
17. Casales M, Salinas-Bravo VM, Martinez-Villafañe A, Gonzalez-Rodriguez JG (2002) Effect of heat treatment on the stress corrosion cracking of alloy 690. Mater Sci Eng A 332:223. https://doi.org/10.1016/S0921-5093(01)01747-610.1016/S0921-5093(01)01747-6 ↗
18. Boehlert CJ (2008) The effect of thermomechanical processing on the creep behavior of Alloy 690. Mater Sci Eng A 473:233. https://doi.org/10.1016/J.MSEA.2007.03.08210.1016/J.MSEA.2007.03.082 ↗
19. J-M Kim, W-G Kim, M-C Kim (2019) Transactions of the Korean Nuclear Society Spring Meeting Jeju.
20. J Min Kim, W Gon Kim, M Chul Kim (2019) Transactions of the Korean Society of Pressure Vessels and Piping 15: 64. https://doi.org/10.20466/KPVP.2019.15.2.06410.20466/KPVP.2019.15.2.064 ↗
21. Lee BS, Kim JM, Kwon JY, Choi KJ, Kim MC (2021) A practical power law creep modeling of alloy 690 SG tube materials. Nucl Eng Technol 53:2953. https://doi.org/10.1016/J.NET.2021.03.00410.1016/J.NET.2021.03.004 ↗
22. JM Kim, MC Kim, JY Kwon (2022) Journal of Pressure Vessel Technology, Transactions of the ASME 144. https://doi.org/10.1115/1.4052450/112040010.1115/1.4052450/1120400 ↗
23. Moon S, Kim JM, Kwon JY, Lee BS, Choi KJ, Kim MC (2022) Creep strain modeling for alloy 690 SG tube material based on modified theta projection method. Nucl Eng Technol 54:1570. https://doi.org/10.1016/J.NET.2021.11.00510.1016/J.NET.2021.11.005 ↗
24. Kim HK, Hong S, Kim J, Kim MC, Lee YK (2023) Effects of Cr carbides formation on the high temperature creep property of alloy 690 for steam generator tube material. J Korean Inst Met Mater 61:301. https://doi.org/10.3365/KJMM.2023.61.4.30110.3365/KJMM.2023.61.4.301 ↗
25. Thorve SM, Sugilal G, Nair KNS (2011) Thermal and stress analyses of oblong shaped metallic melter. BARC Newsletter, Mumbai
26. Monkman F. C., An Empirical Relationship between Rupture Life and Minimum Creep Rate in Creep Rupture Tests, Proc. ASTM. 56 (1956) 91–103
27. Larson FR, Miller J (1952) A time-temperature relationship for rupture and creep stresses. Trans Am Soc Mech Eng 74(5):765–771. https://doi.org/10.1115/1.401590910.1115/1.4015909 ↗
28. W. Ren, Molten salt environment creep testing extensometry system, 2018.
29. Wilshire B, Evans RW (1994) Acquisition and analysis of creep data. J Strain Anal Eng Des 29(3):159–165. https://doi.org/10.1243/03093247V29315910.1243/03093247V293159 ↗
30. H. Kuhn, D. Medlin, eds., Mechanical Testing and Evaluation, ASM International, 2000. https://doi.org/10.31399/asm.hb.v08.9781627081764.10.31399/asm.hb.v08.9781627081764 ↗
31. Kim MJ, Kim HI, Kwon J, Kim KP (2025) Current trends in cyclotrons and Radionuclide production: A comprehensive analysis in the Republic of Korea. Nucl Eng Technol 57(6):10340510.1016/j.net.2024.103405 ↗
32. J Kim, W Kim, M Kim (2019) American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 6B-2019. https://doi.org/10.1115/PVP2019-9349810.1115/PVP2019-93498 ↗
33. Kim WG, Park JY, Ekaputra IMW, Kim SJ, Kim MH, Kim YW (2015) Creep deformation and rupture behavior of Alloy 617. Eng Fail Anal 58:441. https://doi.org/10.1016/J.ENGFAILANAL.2015.07.04110.1016/J.ENGFAILANAL.2015.07.041 ↗
34. Hayes RW, Azzarto F, Klopfer EA, Crimp MA (2017) Characterization of creep deformation of Ni-Cr solid solution alloy Nimonic 75. Mater Sci Eng, A 690:453. https://doi.org/10.1016/J.MSEA.2017.02.09710.1016/J.MSEA.2017.02.097 ↗
35. Chen K, Dong J, Yao Z, Ni T, Wang M (2018) Creep performance and damage mechanism for Allvac 718Plus superalloy. Mater Sci Eng A 738:308. https://doi.org/10.1016/J.MSEA.2018.09.08810.1016/J.MSEA.2018.09.088 ↗
36. De Oliveira MM, Couto AA, Almeida GFC, Reis DAP, De Lima NB, Baldan R (2019) Mechanical behavior of inconel 625 at elevated temperatures. Metals 9(3):9: 301. https://doi.org/10.3390/MET903030110.3390/MET9030301 ↗
37. Kvapilova M, Dvorak J, Kral P, Hrbacek K, Sklenicka V (2019) Creep behaviour and life assessment of a cast nickel–base superalloy MAR–M247. High Temp Mater Process (London) 38:590. https://doi.org/10.1515/HTMP-2019-0006/ASSET/GRAPHIC/J_HTMP-2019-0006_FIG_014.JPG10.1515/HTMP-2019-0006/ASSET/GRAPHIC/J_HTMP-2019-0006_FIG_014.JPG ↗
38. R Viswanathan (1989) Damage Mechanisms. Life Assessment of High-Temperature Components, ASM INTERNATIONAL ® Metals Park, Ohio, 4407310.31399/asm.tb.dmlahtc.9781627083409 ↗
39. M.F. Ashby, B.F. Dyson, Creep Damage Mechanics and Micromechanisms, (1984) 3–30. https://doi.org/10.1016/B978-1-4832-8440-8.50017-X10.1016/B978-1-4832-8440-8.50017-X ↗
40. Choudhary BK (2013) Tertiary creep behaviour of 9Cr–1Mo ferritic steel. Mater Sci Eng A 585:1. https://doi.org/10.1016/J.MSEA.2013.07.02610.1016/J.MSEA.2013.07.026 ↗
41. Sharma PK, Samal MK, Syed A, Gupta D, Chattopadhyay J (2025) Defect evolution and mechanical degradation of alloy 690 in molten glass environment. Procedia Struct Integr 71:12610.1016/j.prostr.2025.08.018 ↗
42. Goods SH (1981) Creep and the corrosion characteristics of Incoloy Alloy 800 in molten nitrate salts. J Mater Energy Syst 3:43. https://doi.org/10.1007/BF02833528/METRICS10.1007/BF02833528/METRICS ↗
43. Kassner ME, Hayes TA (2003) Creep cavitation in metals. Int J Plast 19:1715. https://doi.org/10.1016/S0749-6419(02)00111-010.1016/S0749-6419(02)00111-0 ↗
44. A. Homaeian, M. Alizadeh, Interaction of hot corrosion and creep in Alloy 617, Eng. Fail. Anal. 66 (2016) 373–384. https://doi.org/10.1016/J.ENGFAILANAL.2016.03.01210.1016/J.ENGFAILANAL.2016.03.012 ↗
45. Jang C, Kim SH, Sah I, Kim D (2016) Creep behavior of Alloy 617 in high temperature air and helium environments–effect of oxidation damage. J Mech Sci Technol 30:4433. https://doi.org/10.1007/S12206-016-0907-X/METRICS10.1007/S12206-016-0907-X/METRICS ↗
46. Kim SH, Cha JH, Jang C (2020) Corrosion and creep behavior of a Ni-base alloy in supercritical-carbon dioxide environment at 650 C. Corros Sci 174:108843. https://doi.org/10.1016/J.CORSCI.2020.10884310.1016/J.CORSCI.2020.108843 ↗
47. Li X, Chang L, Liang W et al (2025) Creep deformation and fracture of Ni-based alloy GH3535 in molten FLiNaK and Ar environment. Corros Sci 250:112902. https://doi.org/10.1016/j.corsci.2025.11290210.1016/j.corsci.2025.112902 ↗
48. Gu Y, Zhang W, Xu Y, Shi Y, Volodymyr K (2022) Stress-assisted corrosion behaviour of Hastelloy N in FLiNaK molten salt environment. Mater Degrad. https://doi.org/10.1038/s41529-022-00300-x10.1038/s41529-022-00300-x ↗
49. Mannava V, Sambasivarao A, Paulose N, Kamaraj M, Kottada RS (2019) An investigation of oxidation/hot corrosion-creep interaction at 800 °C in a Ni-base superalloy coated with salt mixture deposits of Na2SO4-NaCl-NaVO3. Corros Sci 147:283. https://doi.org/10.1016/J.CORSCI.2018.11.02910.1016/J.CORSCI.2018.11.029 ↗
50. Lee TH, Suh HY, Han SK, Noh JS, Lee JH (2016) Effect of a heat treatment on the precipitation behavior and tensile properties of alloy 690 steam generator tubes. J Nucl Mater 479:85. https://doi.org/10.1016/J.JNUCMAT.2016.06.03810.1016/J.JNUCMAT.2016.06.038 ↗
51. Maruyama K, Sawada K, Koike JI (2001) Strengthening mechanisms of creep resistant tempered martensitic steel. ISIJ Int 41:641. https://doi.org/10.2355/ISIJINTERNATIONAL.41.64110.2355/ISIJINTERNATIONAL.41.641 ↗
52. Jiang J, Zhu L (2012) Strengthening mechanisms of precipitates in S30432 heat-resistant steel during short-term aging. Mater Sci Eng A 539:170. https://doi.org/10.1016/J.MSEA.2012.01.07610.1016/J.MSEA.2012.01.076 ↗
53. Jena AK, Chaturvedi MC (1984) The role of alloying elements in the design of nickel-base superalloys. J Mater Sci 19:3121. https://doi.org/10.1007/BF00549796/METRICS10.1007/BF00549796/METRICS ↗
54. Hu R, Bai G, Li J, Zhang J, Zhang T, Fu H (2012) Precipitation behavior of grain boundary M23C6 and its effect on tensile properties of Ni–Cr–W based superalloy. Mater Sci Eng A 548:83. https://doi.org/10.1016/J.MSEA.2012.03.09210.1016/J.MSEA.2012.03.092 ↗
55. Iyer AH, Stiller K, Leijon G, Andersson-Östling HC, Colliander MH (2017) Influence of dwell time on fatigue crack propagation in Alloy 718 laser welds. Mater Sci Eng: A 704:440–44710.1016/j.msea.2017.08.049 ↗
56. Mannava V, SambasivaRao A, Kamaraj M, Kottada RS (2019) Influence of two different salt mixture combinations of Na {sub 2} SO {sub 4}-NaCl-NaVO {sub 3} on hot corrosion behavior of Ni-Base superalloy Nimonic263 at 800 °C. J Mater Eng Perform 28:1077. https://doi.org/10.1007/S11665-019-3866-4/TABLES/410.1007/S11665-019-3866-4/TABLES/4 ↗
57. Pei H, Yang Y, Gu S et al (2022) Influence of Two Different Salt Mixture Combinations of Na {sub 2} SO {sub 4}-NaCl-NaVO {sub 3} on Hot Corrosion Behavior of Ni-Base Superalloy Nimonic263 at 800 °C. Mater Sci Eng, A 839:142834. https://doi.org/10.1016/J.MSEA.2022.14283410.1016/J.MSEA.2022.142834 ↗
58. Rolls R, Cleland JH (1981) The influence of oxidation on the steady-state creep of iron at 823–1223 K. Philos Mag A 44:943. https://doi.org/10.1080/0141861810823955910.1080/01418618108239559 ↗
59. Andrieu E, Pieraggi B, Gourgues AF (1998) Role of metal-oxide interfacial reactions on the interactions between oxidation and deformation. Scripta Mater 39:597. https://doi.org/10.1016/S1359-6462(98)00202-410.1016/S1359-6462(98)00202-4 ↗
60. Kondo M, Nagasaka T, Muroga T et al (2009) High performance corrosion resistance of nickel-based alloys in molten salt flibe. Fusion Sci Technol 56:190. https://doi.org/10.13182/FST09-A890010.13182/FST09-A8900 ↗
61. Chateau E, Rémy L (2010) Oxidation-assisted creep damage in a wrought nickel-based superalloy: Experiments and modelling. Mater Sci Eng A 527:1655. https://doi.org/10.1016/J.MSEA.2009.10.05410.1016/J.MSEA.2009.10.054 ↗
62. P Scott, P Combrade, P Ford (2011) Environmentally-Assisted Degradation of Nickel-Base Alloys in LWRs. Advanced Nuclear Technology International,
63. Andrieu E, Molins R, Ghonem H, Pineau A (1992) Intergranular crack tip oxidation mechanism in a nickel-based superalloy. Mater Sci Eng A 154:21. https://doi.org/10.1016/0921-5093(92)90358-810.1016/0921-5093(92)90358-8 ↗
64. Kitaguchi HS, Li HY, Evans HE et al (2013) Oxidation ahead of a crack tip in an advanced Ni-based superalloy. Acta Mater 61:1968. https://doi.org/10.1016/J.ACTAMAT.2012.12.01710.1016/J.ACTAMAT.2012.12.017 ↗
65. Viskari L, Hörnqvist M, Moore KL, Cao Y, Stiller K (2013) Intergranular crack tip oxidation in a Ni-base superalloy. Acta Mater 61:3630. https://doi.org/10.1016/J.ACTAMAT.2013.02.05010.1016/J.ACTAMAT.2013.02.050 ↗
66. Kitaguchi HS, Moody MP, Li HY, Evans HE, Hardy MC, Lozano-Perez S (2015) An atom probe tomography study of the oxide–metal interface of an oxide intrusion ahead of a crack in a polycrystalline Ni-based superalloy. Scr Mater 97:41. https://doi.org/10.1016/J.SCRIPTAMAT.2014.10.02510.1016/J.SCRIPTAMAT.2014.10.025 ↗
67. Németh AAN, Crudden DJ, Armstrong DEJ et al (2017) Environmentally-assisted grain boundary attack as a mechanism of embrittlement in a nickel-based superalloy. Acta Mater 126:361. https://doi.org/10.1016/j.actamat.2016.12.03910.1016/j.actamat.2016.12.039 ↗
68. DF Smith, EF Clatworthy, DG Tipton, WL Mankins (1980) 4th Int. Conf. on Superalloys, Seven Springs, Pa, 1980
69. Kuang W, Song M, Feng X (2020) Insight into the acceleration in oxidation kinetics ahead of stress corrosion crack of alloy 690 in simulated PWR primary water. Corros Sci 176:108943. https://doi.org/10.1016/J.CORSCI.2020.10894310.1016/J.CORSCI.2020.108943 ↗
70. Pandey MC, Taplin DMR, Ashby MF, Dyson BF (1986) The effect of prior exposure-time on air-environment/creep interactions. Acta Metall 34:2225. https://doi.org/10.1016/0001-6160(86)90168-910.1016/0001-6160(86)90168-9 ↗
71. Osgerby S, Dyson BF (1990) Effects of oxygen on creep performance: mechanisms and predictive modelling. Mater Sci Technol (United Kingdom) 6:2. https://doi.org/10.1179/MST.1990.6.1.210.1179/MST.1990.6.1.2 ↗
72. Pfaendtner JA, McMahon JJ (2001) Oxygen-induced intergranular cracking of a Ni-base alloy at elevated temperatures—an example of dynamic embrittlement. Acta Mater 49:3369. https://doi.org/10.1016/S1359-6454(01)00005-210.1016/S1359-6454(01)00005-2 ↗
73. K Wackermann, U Krupp, HJ Christ (2011) ASTM Special Technical PublicationASTM International,
74. Evans HE, Li HY, Bowen P (2013) A mechanism for stress-aided grain boundary oxidation ahead of cracks. Scr Mater 69:179. https://doi.org/10.1016/J.SCRIPTAMAT.2013.03.02610.1016/J.SCRIPTAMAT.2013.03.026 ↗
75. Murry G (1963) Proceedings of the Institution of Mechanical Engineers. Conf Proc 178:6. https://doi.org/10.1243/PIME_CONF_1963_178_082_0210.1243/PIME_CONF_1963_178_082_02 ↗
76. Clough RB (1975) The effects of specimen size and microstructure on the Larson-Miller parameter. Scripta Metall 9:1325. https://doi.org/10.1016/0036-9748(75)90448-210.1016/0036-9748(75)90448-2 ↗
77. Krivenyuk V, Mamuzić I (2007) Correlation of creep-rupture data for complex alloys at elevated temperatures. Metalurgija 46:79
78. Wilshire B, Scharning PJ (2008) Prediction of long term creep data for forged 1Cr–1Mo–0· 25V steel. Mater Sci Technol 24:1. https://doi.org/10.1179/174328407X24577910.1179/174328407X245779 ↗
79. Wilshire B, Scharning PJ (2008) A new methodology for analysis of creep and creep fracture data for 9–12% chromium steels. Int Mater Rev 53:91. https://doi.org/10.1179/174328008X25434910.1179/174328008X254349 ↗
80. Abdallah Z, Perkins K, Arnold C, Abdallah Z, Perkins K, Arnold C (2018) Creep lifing models and techniques. Creep. https://doi.org/10.5772/INTECHOPEN.7182610.5772/INTECHOPEN.71826 ↗
81. Dobeš F, Milička K (1976) The relation between minimum creep rate and time to fracture. Met Sci 10(11):382. https://doi.org/10.1080/03063453.1976.1168356010.1080/03063453.1976.11683560 ↗
82. Povolo F (1985) Comments on the Monkman-Grant and the modified Monkman-Grant relationships. J Mater Sci 20:2005. https://doi.org/10.1007/BF0111228310.1007/BF01112283 ↗
83. Baldan A (1992) Effects of carbides and cavitation on the Monkman-Grant ductility of a nickel-base superalloy. J Mater Sci Lett 11:1315. https://doi.org/10.1007/BF00742189/METRICS10.1007/BF00742189/METRICS ↗
84. Kaftelen H, Baldan A (2004) Comparative creep damage assessments using the various models. J Mater Sci 39:4199. https://doi.org/10.1023/B:JMSC.0000033400.28964.7B/METRICS10.1023/B:JMSC.0000033400.28964.7B/METRICS ↗
85. Murty KL, Gollapudi S, Ramaswamy K, Mathew MD, Charit I (2013) Creep deformation of materials in light water reactors (LWRs). Materials Ageing and Degradation in Light Water Reactors. Woodhead Publishing, Cambridge, pp 81–14810.1533/9780857097453.1.81 ↗
86. Askill J (1970) Tracer diffusion data for metals. Alloys Simple Oxides. https://doi.org/10.1007/978-1-4684-6075-910.1007/978-1-4684-6075-9 ↗
87. Blaizot J, Chaise T, Nélias D, Perez M, Cazottes S, Chaudet P (2016) Constitutive model for nickel alloy 690 (Inconel 690) at various strain rates and temperatures. Int J Plast 80:139. https://doi.org/10.1016/J.IJPLAS.2015.08.01010.1016/J.IJPLAS.2015.08.010 ↗
88. Xuebing H, Yan K, Huihua Z, Yun Z, Zhuangqi H (1998) Influence of heat treatment on the microstructure of a unidirectional Ni-base superalloy. Mater Lett 36:210. https://doi.org/10.1016/S0167-577X(98)00028-710.1016/S0167-577X(98)00028-7 ↗