journal article·2025-12Open access

On the rapid cooling cast solidification microstructures of Mg–Ca–Zn alloys

Yanheng Xie, Magnus Anderson, Claire Utton, Dikai Guan, Matthew Murphy, Hector Basoalto

Journal of Materials Science· Volume 60· Issue 46

Abstract

Abstract This work investigates the influence of Mg–Zn–Ca alloy compositions and rapid cooling conditions on microstructural evolution, with a focus on the formation and behaviour of intermetallic phases such as Mg 2 Ca, MgZn, and Ca 2 Mg 6 Zn 3 during solidification. To achieve this, a combination of experimental characterisation and computational modelling was employed. The Scheil model, extended to ternary alloy systems, was used to simulate micro-segregation during solidification, while a multicomponent mean-field model was applied to predict solid-state phase transformations and the evolution of second-phase particles. CALPHAD-based thermodynamic calculations were integrated to refine the prediction of segregation pathways and phase distributions under non-equilibrium conditions. The model successfully differentiates solidification paths based on alloy composition, predicting that Mg–0.8Zn–0.2Ca (wt%) first forms Mg 2 Ca phase segregation, whereas Mg–6.8Zn–0.2Ca (wt%) primarily segregates MgZn. Experimental validation using SEM–EDS characterisation confirms these predictions. Finally, intermetallic phase formation diagrams under different solidification conditions are presented, providing insights into the control of intermetallic phase formation in Mg–Zn–Ca alloys.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Metallurgical and Alloy Processes · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Pollock TM (2010) Weight loss with magnesium alloys. Science 328:98610.1126/science.1182848 ↗
2. Lu K (2010) The future of metals. Science 328:31910.1126/science.1185866 ↗
3. Joost WJ, Krajewski PE (2017) Towards magnesium alloys for high-volume automotive applications. Scr Mater 128:10710.1016/j.scriptamat.2016.07.035 ↗
4. Nie JF, Shin KS, Zeng ZR (2020) Microstructure, deformation, and property of wrought magnesium alloys. Metall Mater Trans A Phys Metall Mater Sci 51:604510.1007/s11661-020-05974-z ↗
5. Hirsch J, Al-Samman T (2013) Superior light metals by texture engineering: optimized aluminum and magnesium alloys for automotive applications. Acta Mater 61:81810.1016/j.actamat.2012.10.044 ↗
6. Ball EA, Prangnell PB (1994) Tensile-compressive yield asymmetries in high strength wrought magnesium alloys. Scr Metall Mater 31(2):11110.1016/0956-716X(94)90159-7 ↗
7. Shi R, Miao J, Luo AA (2019) A new magnesium sheet alloy and its multi-stage homogenization for simultaneously improved ductility and strength at room temperature. Scr Mater 171:9210.1016/j.scriptamat.2019.06.027 ↗
8. Guan D, Rainforth WM, Ma L, Wynne B, Gao J (2017) Twin recrystallization mechanisms and exceptional contribution to texture evolution during annealing in a magnesium alloy. Acta Mater 126:13210.1016/j.actamat.2016.12.058 ↗
9. Guan D, Liu X, Gao J, Ma L, Wynne BP, Rainforth WM (2019) Exploring the mechanism of “Rare Earth” texture evolution in a lean Mg–Zn–Ca alloy. Sci Rep 9:110.1038/s41598-018-37186-2 ↗
10. Al-Samman T, Li X (2011) Sheet texture modification in magnesium-based alloys by selective rare earth alloying. Mater Sci Eng A 528:380910.1016/j.msea.2011.01.080 ↗
11. Griffiths D (2015) Explaining texture weakening and improved formability in magnesium rare earth alloys. Mater Sci Technol 31:1010.1179/1743284714Y.0000000632 ↗
12. Stanford N (2010) The effect of calcium on the texture, microstructure and mechanical properties of extruded Mg–Mn–Ca alloys. Mater Sci Eng A 528:31410.1016/j.msea.2010.08.097 ↗
13. Chino Y, Huang X, Suzuki K, Mabuchi M (2010) Enhancement of stretch formability at room temperature by addition of Ca in Mg-Zn alloy. Mater Trans 51:1003011013
14. Zeng ZR, Zhu YM, Xu SW, Bian MZ, Davies CHJ, Birbilis N, Nie JF (2016) Texture evolution during static recrystallization of cold-rolled magnesium alloys. Acta Mater 105:47910.1016/j.actamat.2015.12.045 ↗
15. Fan Y, Zhu G, Park JS, Zhang X, Song Z, Wang H, Zeng X, Wang L (2023) The role of Ca on the microstructure and tensile properties of Mg-Al-Zn-Ca alloys. Materialia 29:101787
16. Cheng D, Wang K, Zhou B-C (2023) Crystal structure and stability of phases in Mg-Zn alloys: a comprehensive first-principles study. Acta Mater 242:118443
17. Cihova M, Martinelli E, Schmutz P, Myrissa A, Schäublin R, Weinberg AM, Uggowitzer PJ, Löffler JF (2019) The role of zinc in the biocorrosion behavior of resorbable Mg-Zn-Ca alloys. Acta Biomater 100:39810.1016/j.actbio.2019.09.021 ↗
18. Incesu A, Gungor A (2020) Mechanical properties and biodegradability of Mg–Zn–Ca alloys: homogenization heat treatment and hot rolling. J Mater Sci Mater Med 31:110.1007/s10856-020-06468-5 ↗
19. Bamberger M, Levi G, Vander Sande JB (2006) Precipitation hardening in Mg-Ca-Zn alloys. Metall Mater Trans A Phys Metall Mater Sci 37:48110.1007/s11661-006-0019-9 ↗
20. Zhang B, Hou Y, Wang X, Wang Y, Geng L (2011) Mechanical properties, degradation performance and cytotoxicity of Mg–Zn–Ca biomedical alloys with different compositions. Mater Sci Eng C Mater Biol Appl 31:166710.1016/j.msec.2011.07.015 ↗
21. Hofstetter J, Becker M, Martinelli E, Weinberg AM, Mingler B, Kilian H, Pogatscher S, Uggowitzer PJ, Löffler JF (2014) High-strength low-alloy (HSLA) Mg-Zn-Ca alloys with excellent biodegradation performance. JOM 66:56610.1007/s11837-014-0875-5 ↗
22. Abdel-Gawad SA, Shoeib MA (2019) Corrosion studies and microstructure of Mg−Zn−Ca alloys for biomedical applications. Surf Interfaces 14:10810.1016/j.surfin.2018.11.011 ↗
23. Larionova TV, Park WW, You BS (2001) A ternary phase observed in rapidly solidified Mg–Ca–Zn alloys. Scr Mater 45:710.1016/S1359-6462(01)00982-4 ↗
24. Stoloff NS (2001) Intermetallics: mechanical properties. Encyclopedia of Materials: Science and Technology 4213–422510.1016/B0-08-043152-6/00740-3 ↗
25. Troper A, Gomes AA (1987) Magnetism of actinide-3d Laves phases intermetallics. J Magn Magn Mater 63–64:13010.1016/0304-8853(87)90543-9 ↗
26. Levi G, Avraham S, Zilberov A, Bamberger M (2006) Solidification, solution treatment and age hardening of a Mg–1.6wt.% Ca–3.2wt.% Zn alloy. Acta Mater 54:52310.1016/j.actamat.2005.09.023 ↗
27. Gao X, Zhu SM, Muddle BC, Nie JF (2005) Precipitation-hardened Mg–Ca–Zn alloys with superior creep resistance. Scr Mater 53:132110.1016/j.scriptamat.2005.08.035 ↗
28. Nie JF, Muddle BC (1997) Precipitation hardening of Mg-Ca(-Zn) alloys. Scr Mater 37:147510.1016/S1359-6462(97)00294-7 ↗
29. Oh-ishi K, Watanabe R, Mendis CL, Hono K (2009) Age-hardening response of Mg–0.3at.%Ca alloys with different Zn contents. Mater Sci Eng A 526:17710.1016/j.msea.2009.07.027 ↗
30. Yang Y, Massardier V, Ferdowsi MRG, Jiang L, Wang J, Dorin T, Kada SR, Barnett MR, Perez M (2023) Revisiting precipitation kinetics in Mg-Zn alloy—a multi-characterization and modeling study. Acta Mater 260:119276
31. Yin P, Li NF, Lei T, Liu L, Ouyang C (2013) Effects of Ca on microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Ca alloys. J Mater Sci Mater Med 24:136510.1007/s10856-013-4856-y ↗
32. Pulido-González N, Hidalgo-Manrique P, García-Rodríguez S, Torres B, Rams J (2022) Effect of heat treatment on the mechanical and biocorrosion behaviour of two Mg-Zn-Ca alloys. J Magnes Alloys 10:54010.1016/j.jma.2021.06.022 ↗
33. Basoalto H, Anderson M (2016) An extension of mean-field coarsening theory to include particle coalescence using nearest-neighbour functions. Acta Mater 117:12210.1016/j.actamat.2016.07.007 ↗
34. Anderson MJ, Panwisawas C, Sovani Y, Turner RP, Brooks JW, Basoalto HC (2018) Mean-field modelling of the intermetallic precipitate phases during heat treatment and additive manufacture of Inconel 718. Acta Mater 156:43210.1016/j.actamat.2018.07.002 ↗
35. Anderson MJ, Benson J, Brooks JW, Saunders B, Basoalto HC (2019) Predicting precipitation kinetics during the annealing of additive manufactured Inconel 625 components. Integr Mater Manuf Innov 8:15410.1007/s40192-019-00134-7 ↗
36. Zhang X, Zhao J, Jiang H, Zhu M (2012) A three-dimensional cellular automaton model for dendritic growth in multi-component alloys. Acta Mater 60:224910.1016/j.actamat.2011.12.045 ↗
37. Zhao Y (2023) Understanding and design of metallic alloys guided by phase-field simulations. Npj Comput Mater 9:110.1038/s41524-022-00962-w ↗
38. Deschamps A, Hutchinson CR (2021) Precipitation kinetics in metallic alloys: experiments and modeling. Acta Mater 220:11733810.1016/j.actamat.2021.117338 ↗
39. Scheil E (1942) Bemerkungen zur Schichtkristallbildung. Int J Mater Res 34:7010.1515/ijmr-1942-340303 ↗
40. Chen SL, Yang Y, Chen SW, Lu XG, Chang YA (2009) Solidification simulation using scheil model in multicomponent systems. J Phase Equilib Diffus 30:42910.1007/s11669-009-9568-0 ↗
41. Shi R, Luo AA (2018) Applications of CALPHAD modeling and databases in advanced lightweight metallic materials. Calphad 62:110.1016/j.calphad.2018.04.009 ↗
42. Zhang C, Miao J, Chen S, Zhang F, Luo AA (2019) CALPHAD-based modeling and experimental validation of microstructural evolution and microsegregation in magnesium alloys during solidification. J Phase Equilib Diffus 40:49510.1007/s11669-019-00732-0 ↗
43. Greenwood GW (1956) The growth of dispersed precipitates in solutions. Acta Metall 4:24310.1016/0001-6160(56)90060-8 ↗
44. Lifshitz IM, Slyozov VV (1961) The kinetics of precipitation from supersaturated solid solutions. J Phys Chem Solids 19:3510.1016/0022-3697(61)90054-3 ↗
45. Wagner C (1961) Theorie der Alterung von Niederschlägen durch Umlösen (Ostwald-Reifung). Zeitschrift Für Elektrochemie, Berichte Der Bunsengesellschaft Für Physikalische Chemie 65:58110.1002/bbpc.19610650704 ↗
46. Svoboda J, Fischer FD, Fratzl P, Kozeschnik E (2004) Modelling of kinetics in multi-component multi-phase systems with spherical precipitates. Mater Sci Eng A 385:166
47. Chen Q, Jeppsson J, Ågren J (2008) Analytical treatment of diffusion during precipitate growth in multicomponent systems. Acta Mater 56:189010.1016/j.actamat.2007.12.037 ↗
48. Philippe T, Voorhees PW (2013) Ostwald ripening in multicomponent alloys. Acta Mater 61:423710.1016/j.actamat.2013.03.049 ↗
49. Materials 4.0 - Henry Royce Institute, https://www.royce.ac.uk/collaborate/roadmapping-landscaping/materials-4-0/
50. Williamson JC (2021) Liquid-liquid demonstrations: phase equilibria and the lever rule. J Chem Educ 98:235610.1021/acs.jchemed.0c01517 ↗
51. Boettinger WJ (2016) The solidification of multicomponent alloys. J Phase Equilib Diffus 37:410.1007/s11669-015-0416-0 ↗
52. Marqusee JA, Ross J (1984) Theory of Ostwald ripening: competitive growth and its dependence on volume fraction. J Chem Phys 80:53610.1063/1.446427 ↗
53. Jou H, Voorhees P, GO.- Superalloys, and undefined (2004) Computer simulations for the prediction of microstructure/property variation in aeroturbine disks, Superalloys 2004, Ed. K.A. Green, M. Pollock, H. Harada, T.E.Howson, R.C.Reed, J.J.Schirra and S. Walson, TMS, 200410.7449/2004/Superalloys_2004_877_886 ↗
54. Magnesium-Based Alloys - Thermo-Calc Software, https://thermocalc.com/products/databases/magnesium-based-alloys/
55. Equilibrium Calculator - Thermo-Calc Software. https://thermocalc.com/products/thermo-calc/equilibrium-calculator/
56. Yao X, Tang J, Zhou Y, Atrens A, Dargusch MS, Wiese B, Ebel T, Yan M (2021) Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: corrosion behaviour, microhardness and biocompatibility. J Magnes Alloys 9:215510.1016/j.jma.2020.08.011 ↗
57. Bazhenov VE, Tselovalnik YV, Koltygin AV, Belov VD (2021) Investigation of the interfacial heat transfer coefficient at the metal-mold interface during casting of an A356 aluminum alloy and AZ81 magnesium alloy into steel and graphite molds. Int J Metalcast 15:62510.1007/s40962-020-00495-2 ↗
58. Anderson MJ, Rowe A, Wells J, Basoalto HC (2016) Application of a multi-component mean field model to the coarsening behaviour of a nickel-based superalloy. Acta Mater 114:8010.1016/j.actamat.2016.05.024 ↗
59. Farnin CJ, Rickman JM, DuPont JN (2021) Solutions to the Scheil equation with a variable partition coefficient. Metall Mater Trans A 52:544310.1007/s11661-021-06482-4 ↗
60. Farnin CJ, Orzolek S, DuPont JN (2020) A novel approach to determine variable solute partition coefficients. Metall Mater Trans A Phys Metall Mater Sci 51:577110.1007/s11661-020-05986-9 ↗
61. Okamoto H (1994) Comment on Mg-Zn (magnesium-zinc). J Phase Equilib 15:12910.1007/BF02667700 ↗
62. Buha J (2008) Reduced temperature (22–100 °C) ageing of an Mg–Zn alloy. Mater Sci Eng A 492:1110.1016/j.msea.2008.02.038 ↗
63. Nie JF (2012) Precipitation and hardening in magnesium alloys. Metall Mater Trans A 43:389110.1007/s11661-012-1217-2 ↗
64. Bhattacharjee T, Mendis CL, Oh-ishi K, Ohkubo T, Hono K (2013) The effect of Ag and Ca additions on the age hardening response of Mg–Zn alloys. Mater Sci Eng A 575:23110.1016/j.msea.2013.03.069 ↗
65. Rosalie JM, Somekawa H, Singh A, Mukai T (2011) Orientation relationships between icosahedral clusters in hexagonal MgZn2 and monoclinic Mg4Zn7 phases in Mg-Zn(-Y) alloys. Philos Mag 91:263410.1080/14786435.2010.541168 ↗
66. Xie YP, Wang ZY, Hou ZF (2013) The phase stability and elastic properties of MgZn2 and Mg4Zn7 in Mg–Zn alloys. Scr Mater 68:49510.1016/j.scriptamat.2012.11.034 ↗
67. Wei LY, Dunlop GL, Westengen H (1995) Precipitation hardening of Mg-Zn and Mg-Zn-RE alloys. Metall Mater Trans A 26:170510.1007/BF02670757 ↗
68. Gao X, Nie JF (2007) Characterization of strengthening precipitate phases in a Mg–Zn alloy. Scr Mater 56:64510.1016/j.scriptamat.2007.01.006 ↗