journal article·2025-12

Microstructural evolution and enhanced mechanical performance in cored-wire arc additive manufactured ultra-high strength steel by multi-step heat treatment

Shun Li, Yuezhang Ju, Xiaocong Yang, Chengning Li, Xinjie Di

Journal of Materials Science· Volume 60· Issue 45
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Yan J-B, Luo Y-L, Su L, Lin X, Luo Y-B, Zhang L (2021) Low-temperature compression behaviour of square CFST columns using Q960 ultra-high strength steel. J Constr Steel Res 183:106727. https://doi.org/10.1016/j.jcsr.2021.10672710.1016/j.jcsr.2021.106727 ↗
2. Kong HJ, Yang T, Chen R, Jiao Z, Zhang T, Cao B, Luan J, Liu S, Wang A, Huang JC-C, Wang X-L, Liu CT (2023) Design of ultra-strong but ductile iron-based alloys with low supersaturations. Acta Mater 256:119000. https://doi.org/10.1016/j.actamat.2023.11900010.1016/j.actamat.2023.119000 ↗
3. Lee H, Jo MC, Sohn SS, Zargaran A, Ryu JH, Kim NJ, Lee S (2018) Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism. Acta Mater 147:247–260. https://doi.org/10.1016/j.actamat.2018.01.03310.1016/j.actamat.2018.01.033 ↗
4. Yanli, Song Ye, Li Jue, Lu Lin, Hua Yanfeng, Gu Yikuan, Yang (2025) Strengthening and toughening mechanisms of martensite-bainite microstructure in 2 GPa ultra-high strength steel during hot stamping Science China Technological Sciences 68(5). https://doi.org/10.1007/s11431-024-2901-810.1007/s11431-024-2901-8 ↗
5. Choudhary SK, Ganguly S, Sengupta A, Sharma V (2017) Solidification morphology and segregation in continuously cast steel slab. J Mater Process Technol 243:312–321. https://doi.org/10.1016/j.jmatprotec.2016.12.03010.1016/j.jmatprotec.2016.12.030 ↗
6. Li K, Yang T, Gong N, Wu J, Wu X, Zhang DZ, Murr LE (2023) Additive manufacturing of ultra-high strength steels: a review. J Alloys Compd 965:171390. https://doi.org/10.1016/j.jallcom.2023.17139010.1016/j.jallcom.2023.171390 ↗
7. Dilberoglu UM, Gharehpapagh B, Yaman U, Dolen M (2017) The role of additive manufacturing in the era of Industry 4.0. Procedia Manuf 11:545–554. https://doi.org/10.1016/j.promfg.2017.07.14810.1016/j.promfg.2017.07.148 ↗
8. Blakey-Milner B, Gradl P, Snedden G, Brooks M, Pitot J, Lopez E, Leary M, Berto F, Du Plessis A (2021) Metal additive manufacturing in aerospace: a review. Mater Des 209:110008. https://doi.org/10.1016/j.matdes.2021.11000810.1016/j.matdes.2021.110008 ↗
9. Karlsson D, Chou C-Y, Pettersson NH, Helander T, Harlin P, Sahlberg M, Lindwall G, Odqvist J, Jansson U (2020) Additive manufacturing of the ferritic stainless steel SS441. Addit Manuf 36:101580. https://doi.org/10.1016/j.addma.2020.10158010.1016/j.addma.2020.101580 ↗
10. Guo L, Zhang L, Andersson J, Ojo O (2022) Additive manufacturing of 18% nickel maraging steels: defect, structure and mechanical properties: a review. J Mater Sci Technol 120:227–252. https://doi.org/10.1016/j.jmst.2021.10.05610.1016/j.jmst.2021.10.056 ↗
11. Pixner F, Buzolin R, Zelić A, Riedlsperger F, Orłowska M, Warchomicka F, Decherf M, Lasnik M, Enzinger N (2022) Tailoring the alloy composition for wire arc additive manufacturing utilizing metal-cored wires in the cold metal transfer process. Mater Des 215:110453. https://doi.org/10.1016/j.matdes.2022.11045310.1016/j.matdes.2022.110453 ↗
12. Krishnan S, Kulkarni DV, De A (2016) Pulsed current gas metal arc welding of P91 steels using metal cored wires. J Mater Process Technol 229:826–833. https://doi.org/10.1016/j.jmatprotec.2015.11.00710.1016/j.jmatprotec.2015.11.007 ↗
13. Sun L, Jiang F, Huang R, Yuan D, Guo C, Wang J (2020) Anisotropic mechanical properties and deformation behavior of low-carbon high-strength steel component fabricated by wire and arc additive manufacturing. Mater Sci Eng A 787:139514. https://doi.org/10.1016/j.msea.2020.13951410.1016/j.msea.2020.139514 ↗
14. Beretta S, Romano S (2017) A comparison of fatigue strength sensitivity to defects for materials manufactured by AM or traditional processes. Int J Fatigue 94:178–191. https://doi.org/10.1016/j.ijfatigue.2016.06.02010.1016/j.ijfatigue.2016.06.020 ↗
15. Yu Z, Chai Z, Xu J, Chen J, Chen J, Yu C, Lu H (2021) Achieving high strength and ductility in 17–4 PH steel with a periodic layer structure by laser direct metal depositing and aging. Mater Sci Eng A 824:141787. https://doi.org/10.1016/j.msea.2021.14178710.1016/j.msea.2021.141787 ↗
16. De Cooman BC, Estrin Y, Kim SK (2018) Twinning-induced plasticity (TWIP) steels. Acta Mater 142:283–362. https://doi.org/10.1016/j.actamat.2017.06.04610.1016/j.actamat.2017.06.046 ↗
17. Ma X, Zhang P, Li N, Luo Z, Yang L (2025) Microstructural evolution and deformation mechanisms of heterogeneous dual-phase high-entropy alloys under in-situ compression. Mater Sci Eng A 936:148424. https://doi.org/10.1016/j.msea.2025.14842410.1016/j.msea.2025.148424 ↗
18. Li Y, Li W, Liu W, Wang X, Hua X, Liu H, Jin X (2018) The austenite reversion and co-precipitation behavior of an ultra-low carbon medium manganese quenching-partitioning-tempering steel. Acta Mater 146:126–141. https://doi.org/10.1016/j.actamat.2017.12.03510.1016/j.actamat.2017.12.035 ↗
19. Hu J, Li X, Meng Q, Wang L, Li Y, Xu W (2022) Tailoring retained austenite and mechanical property improvement in Al–Si–V containing medium Mn steel via direct intercritical rolling. Mater Sci Eng A 855:143904. https://doi.org/10.1016/j.msea.2022.14390410.1016/j.msea.2022.143904 ↗
20. Soleimani M, Kalhor A, Mirzadeh H (2020) Transformation-induced plasticity (TRIP) in advanced steels: a review. Mater Sci Eng A 795:140023. https://doi.org/10.1016/j.msea.2020.14002310.1016/j.msea.2020.140023 ↗
21. Zou Y, Xu YB, Wang G, Han Y, Teng HX, Han DT, Qiu MS, Yang F, Misra RDK (2021) Improved strength-ductility-toughness balance of a precipitation-strengthened low-carbon medium-Mn steel by adopting intercritical annealing-tempering process. Mater Sci Eng A 802:140636. https://doi.org/10.1016/j.msea.2020.14063610.1016/j.msea.2020.140636 ↗
22. Hou W, Liu Q, Gu J (2020) Improved impact toughness by multi-step heat treatment in a 1400 MPa low carbon precipitation-strengthened steel. Mater Sci Eng A 797:140077. https://doi.org/10.1016/j.msea.2020.14007710.1016/j.msea.2020.140077 ↗
23. Xi X, Wang J, Chen L, Wang Z (2019) Tailoring mechanical properties of a low carbon Cu-containing structural steel by two-step intercritical heat treatment. Met Mater Int 25:1477–1487. https://doi.org/10.1007/s12540-019-00343-x10.1007/s12540-019-00343-x ↗
24. Kalhor A, Soleimani M, Mirzadeh H, Uthaisangsuk V (2020) A review of recent progress in mechanical and corrosion properties of dual phase steels. Arch Civ Mech Eng. https://doi.org/10.1007/s43452-020-00088-010.1007/s43452-020-00088-0 ↗
25. Xu SS, Li JP, Cui Y, Zhang Y, Sun LX, Li J, Luan JH, Jiao ZB, Wang X-L, Liu CT, Zhang ZW (2020) Mechanical properties and deformation mechanisms of a novel austenite-martensite dual phase steel. Int J Plast 128:102677. https://doi.org/10.1016/j.ijplas.2020.10267710.1016/j.ijplas.2020.102677 ↗
26. Yang X, Di X, Duan Q, Fu W, Ba L, Li C (2023) Effect of precipitation evolution of NiAl and Cu nanoparticles on strengthening mechanism of low carbon ultra-high strength seamless tube steel. Mater Sci Eng A 872:144939. https://doi.org/10.1016/j.msea.2023.14493910.1016/j.msea.2023.144939 ↗
27. Yang X, Li C, Wang J, Wang J, Ba L, Wang C, Duan Q, Ju Y, Di X (2024) New strategy to simultaneously improve strength-toughness balance for low-carbon ultrastrong steel by multi-step heat treatment process. Mater Sci Eng A 914:147118. https://doi.org/10.1016/j.msea.2024.14711810.1016/j.msea.2024.147118 ↗
28. Zhou T, Zheng T, Yildiz AB, Spartacus G, Rolinska M, Cubitt R, Hedström P (2022) Microstructure control during deposition and post-treatment to optimize mechanical properties of wire-arc additively manufactured 17–4 PH stainless steel. Addit Manuf 58:103047. https://doi.org/10.1016/j.addma.2022.10304710.1016/j.addma.2022.103047 ↗
29. Lyu Z, Sato YS, Li S, Xu W, Xu Z, Hu X, Zhu Q (2024) Tailoring microstructure and mechanical properties of 17–4PH steel fabricated by wire-arc directed energy deposition via a combination of intrinsic and post-processing heat treatments. Addit Manuf 80:103954. https://doi.org/10.1016/j.addma.2023.10395410.1016/j.addma.2023.103954 ↗
30. E28 Committee (n.d.) Test methods for tension testing of metallic materials. https://doi.org/10.1520/e0008_e0008m-13a.10.1520/e0008_e0008m-13a ↗
31. Li C, Duan R, Fu W, Gao H, Wang D, Di X (2021) Improvement of mechanical properties for low carbon ultra-high strength steel strengthened by Cu-rich multistructured precipitation via modification to bainite. Mater Sci Eng A 817:141337. https://doi.org/10.1016/j.msea.2021.14133710.1016/j.msea.2021.141337 ↗
32. Fu W, Li C, Duan R, Gao H, Di X, Wang D (2022) Formation mechanism of CuNiAl-rich multi-structured precipitation and its effect on mechanical properties for ultra-high strength low carbon steel obtained via direct quenching and tempering process. Mater Sci Eng A 833:142567. https://doi.org/10.1016/j.msea.2021.14256710.1016/j.msea.2021.142567 ↗
33. Cai M, Chen L, Fang K, Huang H, Hodgson P (2021) The effects of a ferritic or martensitic matrix on the tensile behavior of a nano-precipitation strengthened ultra-low carbon Ti–Mo–Nb steel. Mater Sci Eng A 801:140410. https://doi.org/10.1016/j.msea.2020.14041010.1016/j.msea.2020.140410 ↗
34. Yang X, Di X, Wang J, Fang C, Fu W, Ba L, Zhou X, Zhang C, Li C (2023) The co-precipitation evolution of NiAl and Cu nanoparticles and its influence on strengthening and toughening mechanisms in low-carbon ultra-high strength martensite seamless tube steel. Int J Plast 166:103654. https://doi.org/10.1016/j.ijplas.2023.10365410.1016/j.ijplas.2023.103654 ↗
35. Han J, Da Silva AK, Ponge D, Raabe D, Lee S-M, Lee Y-K, Lee S-I, Hwang B (2017) The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel. Acta Mater 122:199–206. https://doi.org/10.1016/j.actamat.2016.09.04810.1016/j.actamat.2016.09.048 ↗
36. Ding C, Niu G, Wang E, Liu J, Gong N, Liu H, Wang Y, Yu X, Wang X, Shang C, Wu H (2023) Significant efficiency improvement of conventional tempering by a novel flash tempering technique. J Mater Res Technol 25:3551–3560. https://doi.org/10.1016/j.jmrt.2023.06.15310.1016/j.jmrt.2023.06.153 ↗
37. Wang T, Qian L, Yu W, Li K, Zhang F, Meng J (2022) Effect of ferrite-austenite morphology and orientation relationship on bainite transformation in low-alloy TRIP steels. Mater Charact 184:111656. https://doi.org/10.1016/j.matchar.2021.11165610.1016/j.matchar.2021.111656 ↗
38. Wang J, Li H, Wang Q, Liang Z, Gao S, Sun L, Gao X, Yang Z, Li Y, Zhang F (2024) Effect of rapid tempering at high temperature on microstructure, mechanical properties and stability of retained austenite of medium carbon ultrafine bainitic steel. J Mater Res Technol 28:3144–3154. https://doi.org/10.1016/j.jmrt.2023.12.23810.1016/j.jmrt.2023.12.238 ↗
39. Chen J, Lv M, Tang S, Liu Z, Wang G (2015) Correlation between mechanical properties and retained austenite characteristics in a low-carbon medium manganese alloyed steel plate. Mater Charact 106:108–111. https://doi.org/10.1016/j.matchar.2015.05.02610.1016/j.matchar.2015.05.026 ↗
40. Wang J, Di X, Li C, Wang D (2021) The influence of Ni on Bainite/Martensite transformation and mechanical properties of deposited metals obtained from metal-cored wire. Metals 11:1971. https://doi.org/10.3390/met1112197110.3390/met11121971 ↗
41. He SH, He BB, Zhu KY, Huang MX (2018) Evolution of dislocation density in bainitic steel: modeling and experiments. Acta Mater 149:46–56. https://doi.org/10.1016/j.actamat.2018.02.02310.1016/j.actamat.2018.02.023 ↗
42. Zhao Y, Tong X, Wei XH, Xu SS, Lan S, Wang X-L, Zhang ZW (2019) Effects of microstructure on crack resistance and low-temperature toughness of ultra-low carbon high strength steel. Int J Plast 116:203–215. https://doi.org/10.1016/j.ijplas.2019.01.00410.1016/j.ijplas.2019.01.004 ↗
43. Hansen N (2004) Hall-petch relation and boundary strengthening. Scr Mater 51:801–806. https://doi.org/10.1016/j.scriptamat.2004.06.00210.1016/j.scriptamat.2004.06.002 ↗
44. Zheng B, Yang J, Zhang Y, Zhang S, Shu G (2024) Study on monotonic and cyclic properties of WAAM low-carbon steel thick plate. Structures 67:106964. https://doi.org/10.1016/j.istruc.2024.10696410.1016/j.istruc.2024.106964 ↗
45. Yadav A, Srivastava M, Jain PK (2025) Design and fabrication of wire arc additive manufacturing setup and enhanced tailored properties of dissimilar steel additively deposited by WAAM process. Struct 72:108228. https://doi.org/10.1016/j.istruc.2025.10822810.1016/j.istruc.2025.108228 ↗
46. Weber B, Meng X, Zhang R, Nitawaki M, Sagawa T, Gardner L (2024) Tensile behaviour of WAAM high strength steel material and members. Mater Des 237:112517. https://doi.org/10.1016/j.matdes.2023.11251710.1016/j.matdes.2023.112517 ↗
47. Wang J, Li C, Wang D, Di X (2023) Effect of microalloying with Nb and/or V on the microstructure and mechanical properties of GPa grade deposited metals. Weld World 67:2107–2122. https://doi.org/10.1007/s40194-023-01531-510.1007/s40194-023-01531-5 ↗
48. Seede R, Zhang B, Whitt A, Picak S, Gibbons S, Flater P, Elwany A, Arroyave R, Karaman I (2021) Effect of heat treatments on the microstructure and mechanical properties of an ultra-high strength martensitic steel fabricated via laser powder bed fusion additive manufacturing. Addit Manuf 47:102255. https://doi.org/10.1016/j.addma.2021.10225510.1016/j.addma.2021.102255 ↗
49. Caballero A, Ding J, Ganguly S, Williams S (2019) Wire + arc additive manufacture of 17–4 PH stainless steel: effect of different processing conditions on microstructure, hardness, and tensile strength. J Mater Process Technol 268:54–62. https://doi.org/10.1016/j.jmatprotec.2019.01.00710.1016/j.jmatprotec.2019.01.007 ↗
50. Babu A, Trodini E, Argumedo JLG, Richardson IM, Hermans MJM (2025) Correlating geometry, microstructure and properties of high strength steel thin wall structures fabricated with WAAM. J Adv Join Process 11:100292. https://doi.org/10.1016/j.jajp.2025.10029210.1016/j.jajp.2025.100292 ↗