journal article·2025-11Open access

Zn and Al vapour-phase metalation of polyamide-6 via ALD: structural, functional, and biomedical insights

Mabel Moreno, Sindy Devis, Luis Velasquez, Miryam Arredondo, Davide Mariotti, Ruairi McGlynn, Hugo Sanchéz-Ruderisch, Raúl Quijada, Guillermo González, Yusser Olguin, Paula Solar, Angelica Zacarias, Eberhard K. U. Gross

Journal of Materials Science· Volume 60· Issue 44

Abstract

Abstract This study reports the effect of diethylzinc (DEZ) and trimethylaluminium (TMA) functionalization on polyamide-6 (PA6) films using the vapour-phase metalation (VPM) process within an atomic layer deposition (ALD) chamber. The resulting zinc- and aluminium-functionalized films are referred to henceforth as PA6-Zn and PA6-Al, respectively. Biocompatibility was preliminarily assessed via C2C12 cytotoxicity testing. Reaction mechanisms were examined using density functional theory, electrostatic potential maps, Mulliken charge distribution, and X-ray photoelectron spectroscopy, revealing interactions between metal precursors and PA6 amide groups. DFT confirmed α-PA6 as the dominant structure and identified reactive sites influencing functionalization pathways. Structural and morphological changes were analysed via environmental scanning electron microscopy and X-ray diffraction. ESEM showed Zn-functionalized PA6 forming strand-like structures, while Al-functionalized PA6 developed pore-like cavities. XRD indicated increased crystallinity upon metalation, with the α/γ crystallite size ratio following the trend: PA6-Al > PA6-Zn > PA6. Spectroscopic analysis using infrared and Raman microscopy, along with UV–visible spectroscopy, highlighted modifications in chemical bonding and polymorphism, aligning with DFT predictions. Al functionalization had a stronger influence on PA6’s spectroscopic and some mechanical properties, whereas Zn functionalization notably enhanced failure strain. Barrier and mechanical properties were evaluated, showing that Zn-functionalized PA6 exhibited superior oxygen permeability, while both metal-modified films improved water vapour transmission rates compared to bare PA6. Cytotoxicity testing revealed enhanced C2C12 cell proliferation in the order PA6-Al > PA6-Zn > PA6, suggesting VPM-modified PA6 as a promising material for biomedical applications. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Orthopaedic implants and arthroplasty · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. Jones AAD, Mi G, Webster TJ (2019) A status report on FDA approval of medical devices containing nanostructured materials. Trends Biotechnol 37(2):117–120. https://doi.org/10.1016/j.tibtech.2018.06.00310.1016/j.tibtech.2018.06.003 ↗
2. Yang P, Bian C, Huang X, Shi A, Wang C, Wang K (2014) Core decompression in combination with nano-hydroxyapatite/polyamide 66 rod for the treatment of osteonecrosis of the femoral head. Arch Orthop Trauma Surg 134:103–112. https://doi.org/10.1007/s00402-013-1885-410.1007/s00402-013-1885-4 ↗
3. Yi H, Ur Rehman F, Zhao C, Liu B, He N (2016) Recent advances in nano scaffolds for bone repair. Bone Res 4(1):1–11. https://doi.org/10.1038/boneres.2016.5010.1038/boneres.2016.50 ↗
4. O’Brien CM, Holmes B, Faucett S, Zhang LG (2015) Three-dimensional printing of nanomaterial scaffolds for complex tissue regeneration. Tissue Eng Part B Rev 21(1):103–114. https://doi.org/10.1089/ten.teb.2014.016810.1089/ten.teb.2014.0168 ↗
5. Zadeh MA, Khoder M, Al-Kinani AA, Younes HM, Alany RG (2019) Retinal cell regeneration using tissue engineered polymeric scaffolds. Drug Discovery Today 24(8):1669–1678. https://doi.org/10.1016/j.drudis.2019.04.00910.1016/j.drudis.2019.04.009 ↗
6. Seymour JP, Wu F, Wise KD, Yoon E (2017) State-of-the-art MEMS and microsystem tools for brain research. Microsyst Nanoeng 3(1):1–16. https://doi.org/10.1038/micronano.2016.6610.1038/micronano.2016.66 ↗
7. Aijie C, Xuan L, Huimin L, Yanli Z, Yiyuan K, Yuqing L, Longquan S (2018) Nanoscaffolds in promoting regeneration of the peripheral nervous system. Nanomedicine 13(9):1067–1085. https://doi.org/10.2217/nnm-2017-038910.2217/nnm-2017-0389 ↗
8. Wardeh M, Baylis M, Blagrove MS (2021) Predicting mammalian hosts in which novel coronaviruses can be generated. Nat Commun 12(1):780. https://doi.org/10.1038/s41467-021-21034-510.1038/s41467-021-21034-5 ↗
9. Sengupta J, Adhikari A, Hussain CM (2021) Graphene-based analytical lab-on-chip devices for detection of viruses: A review. Carbon Trends 4:100072. https://doi.org/10.1016/j.cartre.2021.10007210.1016/j.cartre.2021.100072 ↗
10. Jamshaid T, Neto ETT, Eissa MM, Zine N, Kunita MH, El-Salhi AE, Elaissari A (2016) Magnetic particles: From preparation to lab-on-a-chip, biosensors, microsystems and microfluidics applications. TrAC, Trends Anal Chem 79:344–362. https://doi.org/10.1016/j.trac.2015.10.02210.1016/j.trac.2015.10.022 ↗
11. Hollister SJ (2005) Porous scaffold design for tissue engineering. Nat Mater 4(7):518–524. https://doi.org/10.1038/nmat142110.1038/nmat1421 ↗
12. Freed LE, Vunjak-Novakovic G, Biron RJ, Eagles DB, Lesnoy DC, Barlow SK, Langer R (1994) Biodegradable polymer scaffolds for tissue engineering. Bio/Technology 12(7):689–693. https://doi.org/10.1038/nbt0794-68910.1038/nbt0794-689 ↗
13. Ratner BD (2015) The biocompatibility of implant materials. In Host response to biomaterials (pp. 37–51). Academic Press. https://doi.org/10.1016/B978-0-12-800196-7.00003-710.1016/B978-0-12-800196-7.00003-7 ↗
14. U.S. Food and Drug Administration (2015) List of Medical Devices, by Product Code, that FDA classifies as Implantable, Life-Saving, and Life-Sustaining Devices for purposes of Section 614 of FDASIA amending Section 519(f) of the FDC Act. Retrieved from https://www.fda.gov/media/87739/download
15. Lau WJ, Gray S, Matsuura T, Emadzadeh D, Chen JP, Ismail AF (2015) A review on polyamide thin film nanocomposite (TFN) membranes: History, applications, challenges and approaches. Water Res 80:306–324. https://doi.org/10.1016/j.watres.2015.04.03710.1016/j.watres.2015.04.037 ↗
16. Shakiba M et al (2021) Nylon—A material introduction and overview for biomedical applications. Polymers Adv Technol 32(9):3368–3383. https://doi.org/10.1002/pat.537210.1002/pat.5372 ↗
17. Ramesh C, Gowd EB (2001) High-temperature X-ray diffraction studies on the crystalline transitions in the α-and γ-forms of nylon-6. Macromolecules 34(10):3308–3313. https://doi.org/10.1021/ma000697910.1021/ma0006979 ↗
18. Quarti C, Milani A, Civalleri B, Orlando R, Castiglioni C (2012) Ab initio calculation of the crystalline structure and IR spectrum of polymers: Nylon 6 polymorphs. J Phys Chem B 116(28):8299–8311. https://doi.org/10.1021/jp303715v10.1021/jp303715v ↗
19. Shen L, Phang IY, Liu T (2006) Nanoindentation studies on polymorphism of nylon 6. Polym Testing 25(2):249–253. https://doi.org/10.1016/j.polymertesting.2005.09.01910.1016/j.polymertesting.2005.09.019 ↗
20. Naleway SE, Lear W, Kruzic JJ, Maughan CB (2015) Mechanical properties of suture materials in general and cutaneous surgery. J Biomed Mater Res B Appl Biomater 103(4):735–742. https://doi.org/10.1002/jbm.b.3317110.1002/jbm.b.33171 ↗
21. Zhuravleva M et al (2019) In vitro assessment of electrospun polyamide-6 scaffolds for esophageal tissue engineering. J Biomed Mater Res Part B Appl Biomater 107(2):253–268. https://doi.org/10.1002/jbm.b.3411610.1002/jbm.b.34116 ↗
22. Ali MG et al (2020) Dual nanofiber scaffolds composed of polyurethane-gelatin/nylon 6-gelatin for bone tissue engineering. Colloids Surf A Physicochem Eng Aspects 597:124817. https://doi.org/10.1016/j.colsurfa.2020.12481710.1016/j.colsurfa.2020.124817 ↗
23. Lind JU et al (2017) Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing. Nature Mater 16(3):303–308. https://doi.org/10.1038/nmat478210.1038/nmat4782 ↗
24. Dias FTG et al (2019) Soybean-modified polyamide-6 mats as a long-term cutaneous wound covering. Mater Sci Eng C 99:957–968. https://doi.org/10.1016/j.msec.2019.02.01910.1016/j.msec.2019.02.019 ↗
25. Mohammadzadeh V, Mahmoudi E, Ramezani S, Navaeian M, Taheri RA, Ghorbani M (2023) Design of a novel tannic acid enriched hemostatic wound dressing based on electrospun polyamide-6/hydroxyethyl cellulose nanofibers. J Drug Delivery Sci Technol 86:104625. https://doi.org/10.1016/j.jddst.2023.10462510.1016/j.jddst.2023.104625 ↗
26. Niu X et al (2021) Coated electrospun polyamide-6/chitosan scaffold with hydroxyapatite for bone tissue engineering. Biomed Mater 16(2):025014. https://doi.org/10.1088/1748-605X/abd68a10.1088/1748-605X/abd68a ↗
27. Lee SM, Pippel E, Knez M (2011) Metal infiltration into biomaterials by ALD and CVD: a comparative study. ChemPhysChem 12(4):791–798. https://doi.org/10.1002/cphc.20100092310.1002/cphc.201000923 ↗
28. Puurunen RL (2005) Surface chemistry of atomic layer deposition: A case study for the trimethylaluminum/water process. J Appl Phys. https://doi.org/10.1063/1.194072710.1063/1.1940727 ↗
29. Tynell T, Karppinen M (2014) Atomic layer deposition of ZnO: a review. Semicond Sci Technol 29(4):043001. https://doi.org/10.1088/0268-1242/29/4/04300110.1088/0268-1242/29/4/043001 ↗
30. Hagen DJ, Pemble ME, Karppinen M (2019) Atomic layer deposition of metals: Precursors and film growth. Appl Phys Rev. https://doi.org/10.1063/1.508775910.1063/1.5087759 ↗
31. Reiners M, Xu K, Aslam N, Devi A, Waser R, Hoffmann-Eifert S (2013) Growth and crystallization of TiO2 thin films by atomic layer deposition using a novel amido guanidinate titanium source and tetrakis-dimethylamido-titanium. Chem Mater 25(15):2934–2943. https://doi.org/10.1021/cm303703r10.1021/cm303703r ↗
32. George SM (2010) Atomic layer deposition: an overview. Chem Rev 110(1):111–131. https://doi.org/10.1021/cr900056b10.1021/cr900056b ↗
33. Sundberg P, Karppinen M (2014) Organic and inorganic–organic thin film structures by molecular layer deposition: A review. Beilstein J Nanotechnol 5(1):1104–1136. https://doi.org/10.3762/bjnano.5.12310.3762/bjnano.5.123 ↗
34. Hoppe C et al (2022) Influence of surface activation on the microporosity of PE-CVD and PE-ALD SiOx thin films on PDMS. Plasma Process Polym 19(4):2100174. https://doi.org/10.1002/ppap.20210017410.1002/ppap.202100174 ↗
35. Leng CZ, Losego MD (2017) Vapor phase infiltration (VPI) for transforming polymers into organic–inorganic hybrid materials: a critical review of current progress and future challenges. Mater Horiz 4(5):747–771. https://doi.org/10.1039/C7MH00196G10.1039/C7MH00196G ↗
36. Moreno M et al (2021) ZnO nucleation into trititanate nanotubes by ALD equipment techniques, a new way to functionalize layered metal oxides. Sci Rep 11(1):7698. https://doi.org/10.1038/s41598-021-86722-010.1038/s41598-021-86722-0 ↗
37. Lee SM et al (2009) Greatly increased toughness of infiltrated spider silk. Science 324(5926):488–492. https://doi.org/10.1126/science.116816210.1126/science.1168162 ↗
38. Akyildiz HI, Padbury RP, Parsons GN, Jur JS (2012) Temperature and exposure dependence of hybrid organic–inorganic layer formation by sequential vapor infiltration into polymer fibers. Langmuir 28(44):15697–15704. https://doi.org/10.1021/la302991c10.1021/la302991c ↗
39. Gong B, Peng Q, Jur JS, Devine CK, Lee K, Parsons GN (2011) Sequential vapor infiltration of metal oxides into sacrificial polyester fibers: shape replication and controlled porosity of microporous/mesoporous oxide monoliths. Chem Mater 23(15):3476–3485. https://doi.org/10.1021/cm200694w10.1021/cm200694w ↗
40. Peng Q, Tseng YC, Darling SB, Elam JW (2011) A route to nanoscopic materials via sequential infiltration synthesis on block copolymer templates. ACS Nano 5(6):4600–4606. https://doi.org/10.1021/nn200323410.1021/nn2003234 ↗
41. Lee L, Yoon KH, Jung JW, Yoon HR, Kim H, Kim SH, Sung MM (2018) Ultra gas-proof polymer hybrid thin layer. Nano Lett 18(9):5461–5466. https://doi.org/10.1021/acs.nanolett.8b0185510.1021/acs.nanolett.8b01855 ↗
42. Mondloch JE et al (2013) Vapor-phase metalation by atomic layer deposition in a metal–organic framework. J Am Chem Soc 135(28):10294–10297. https://doi.org/10.1021/ja405082810.1021/ja4050828 ↗
43. Gregorczyk KE, Pickup DF, Sanz MG, Irakulis IA, Rogero C, Knez M (2014) Tuning the tensile strength of cellulose through vapor-phase metalation. Chem Mater 27(1):181–188. https://doi.org/10.1021/cm503724c10.1021/cm503724c ↗
44. Wilson CA, Grubbs RK, George SM (2005) Nucleation and growth during Al2O3 atomic layer deposition on polymers. Chem Mater 17(23):5625–5634. https://doi.org/10.1021/cm050704d10.1021/cm050704d ↗
45. Subramanian A, Tiwale N, Nam CY (2019) Review of recent advances in applications of vapor-phase material infiltration based on atomic layer deposition. Jom 71(1):185–196. https://doi.org/10.1007/s11837-018-3141-410.1007/s11837-018-3141-4 ↗
46. Omotosho KD, Gurung V, Banerjee P, Shevchenko EV, Berman D (2024) Self-cleaning highly porous TiO2 coating designed by swelling-assisted sequential infiltration synthesis (SIS) of a block copolymer template. Polymers 16(3):308. https://doi.org/10.3390/polym1603030810.3390/polym16030308 ↗
47. Wang W, Chen C, Tollan C, Yang F, Beltrán M, Qin Y, Knez M (2017) Conductive polymer-inorganic hybrid materials through synergistic mutual doping of the constituents. ACS Appl Mater Interf 9(33):27964–27971. https://doi.org/10.1021/acsami.7b0927010.1021/acsami.7b09270 ↗
48. Xie W, Khan S, Rojas OJ, Parsons GN (2018) Control of micro-and mesopores in carbon nanofibers and hollow carbon nanofibers derived from cellulose diacetate via vapor phase infiltration of diethyl zinc. ACS Sustain Chem Eng 6(11):13844–13853. https://doi.org/10.1021/acssuschemeng.8b0201410.1021/acssuschemeng.8b02014 ↗
49. De S et al (2020) Vapor-phase infiltration inside a microporous porphyrinic metal-organic framework for postsynthesis modification. Inorganic Chem 59(14):10129–10137. https://doi.org/10.1021/acs.inorgchem.0c0125010.1021/acs.inorgchem.0c01250 ↗
50. Tseng YC, Peng Q, Ocola LE, Elam JW, Darling SB (2011) Enhanced block copolymer lithography using sequential infiltration synthesis. J Phys Chem C 115(36):17725–17729. https://doi.org/10.1021/jp205532e10.1021/jp205532e ↗
51. Parsons GN et al (2013) Mechanisms and reactions during atomic layer deposition on polymers. Coordin Chem Rev 257(2324):3323–3331. https://doi.org/10.1016/j.ccr.2013.07.00110.1016/j.ccr.2013.07.001 ↗
52. Kayaci F, Ozgit-Akgun C, Donmez I, Biyikli N, Uyar T (2012) Polymer–inorganic core–shell nanofibers by electrospinning and atomic layer deposition: Flexible nylon–ZnO core–shell nanofiber mats and their photocatalytic activity. ACS Appl Mater Interf 4(11):6185–6194. https://doi.org/10.1021/am301797610.1021/am3017976 ↗
53. Moreno M et al (2018) IR and NMR spectroscopic correlation of enterobactin by DFT. Spectrochimica Acta Part A Molecular Biomolecular Spectr 198:264–277. https://doi.org/10.1016/j.saa.2018.02.06010.1016/j.saa.2018.02.060 ↗
54. Biesinger MC (2022) Accessing the robustness of adventitious carbon for charge referencing (correction) purposes in XPS analysis: Insights from a multi-user facility data review. Appl Surf Sci 597:153681. https://doi.org/10.1016/j.apsusc.2022.15368110.1016/j.apsusc.2022.153681 ↗
55. Barr TL, Seal S (1995) Nature of the use of adventitious carbon as a binding energy standard. J Vac Sci Technol A: Vac Surf Films 13(3):1239–1246. https://doi.org/10.1116/1.57986810.1116/1.579868 ↗
56. Silva-Leyton R, Quijada R, Bastías R, Zamora N, Olate-Moya F, Palza H (2019) Polyethylene/graphene oxide composites toward multifunctional active packaging films. Compos Sci Technol 184:107888. https://doi.org/10.1016/j.compscitech.2019.10788810.1016/j.compscitech.2019.107888 ↗
57. Gómez M, Palza H, Quijada R (2016) Influence of organically-modified montmorillonite and synthesized layered silica nanoparticles on the properties of polypropylene and polyamide-6 nanocomposites. Polymers 8(11):386. https://doi.org/10.3390/polym811038610.3390/polym8110386 ↗
58. Moreno M, Quijada R, Santa Ana MA, Benavente E, Gomez-Romero P, González G (2011) Electrical and mechanical properties of poly (ethylene oxide)/intercalated clay polymer electrolyte. Electrochim Acta 58:112–118. https://doi.org/10.1016/j.electacta.2011.08.09610.1016/j.electacta.2011.08.096 ↗
59. He F et al (2008) Noninvasive molecular imaging of hypoxia in human xenografts: comparing hypoxia-induced gene expression with endogenous and exogenous hypoxia markers. Cancer Res 68(20):8597–8606. https://doi.org/10.1158/0008-5472.CAN-08-067710.1158/0008-5472.CAN-08-0677 ↗
60. Vietti G et al (2013) Towards predicting the lung fibrogenic activity of nanomaterials: experimental validation of an in vitro fibroblast proliferation assay. Particle Fibre Toxicol 10:1–14. https://doi.org/10.1186/1743-8977-10-5210.1186/1743-8977-10-52 ↗
61. Yu HS, He X, Truhlar DG (2016) MN15-L: A new local exchange-correlation functional for Kohn-Sham density functional theory with broad accuracy for atoms, molecules, and solids. J Chem Theory Comput 12(3):1280–1293. https://doi.org/10.1021/acs.jctc.5b0108210.1021/acs.jctc.5b01082 ↗
62. Binning RC Jr, Curtiss LA (1990) Compact contracted basis sets for third-row atoms: Ga–Kr. J Comput Chem 11(10):1206–1216. https://doi.org/10.1002/jcc.54011101310.1002/jcc.540111013 ↗
63. McGrath MP, Radom L (1991) Extension of Gaussian-1 (G1) theory to bromine-containing molecules. J Chem Phys 94(1):511–516. https://doi.org/10.1063/1.46036710.1063/1.460367 ↗
64. Curtiss LA, McGrath MP, Blaudeau JP, Davis NE, Binning RC, Radom L (1995) Extension of Gaussian-2 theory to molecules containing third-row atoms Ga–Kr. J Chem Phys 103(14):6104–6113. https://doi.org/10.1063/1.47043810.1063/1.470438 ↗
65. Frisch ME, Trucks GW, Schlegel HB, Scuseria GE, Robb M, Cheeseman JR, ... & Fox DJ (2016) Gaussian 16. https://doi.org/10.1016/j.cpc.2021.10817510.1016/j.cpc.2021.108175 ↗
66. Dennington R, Keith T, Millam J (2009) Semichem Inc. Shawnee Mission KS, GaussView, Version, 5(8).
67. Powell CJ (2020) Practical guide for inelastic mean free paths, effective attenuation lengths, mean escape depths, and information depths in x-ray photoelectron spectroscopy. J Vacuum Sci Technol A Vacuum Surf Films 38(2):023209. https://doi.org/10.1116/1.514107910.1116/1.5141079 ↗
68. Puerto MA, Costa TMH, Jornada JAH, Balzaretti NM (2018) Pyrolisys of α-aminoacids under high-pressure investigated by XPS, Raman and infrared spectroscopy. Mater Chem Phys 211:107–11610.1016/j.matchemphys.2018.02.018 ↗
69. Winiarski J, Tylus W, Winiarska K, Szczygieł I, Szczygieł B (2018) XPS and FT-IR characterization of selected synthetic corrosion products of zinc expected in neutral environment containing chloride ions. J Spectrosc, 2018. https://www.hindawi.com/journals/jspec/2018/2079278/10.1155/2018/2079278 ↗
70. Louette P, Bodino F, Pireaux JJ (2005) Nylon 6 (N6) Reference XPS reference core level and energy loss spectra. Surf Sci Spectra 12(1):12–17. https://doi.org/10.1116/11.2005090310.1116/11.20050903 ↗
71. Wühn M, Weckesser J, Wöll C (2001) Bonding and orientational ordering of long-chain carboxylic acids on Cu (111): Investigations using X-ray absorption spectroscopy. Langmuir 17(24):7605–7612. https://doi.org/10.1021/la010237o10.1021/la010237o ↗
72. Segovia M et al (2011) Zinc oxide/carboxylic acid lamellar structures. Mater Res Bull 46(11):2191–219510.1016/j.materresbull.2011.06.040 ↗
73. Frost RL, Martens WN, Wain DL, Hales MC (2008) Infrared and infrared emission spectroscopy of the zinc carbonate mineral smithsonite. Spectrochim Acta Part A Mol Biomol Spectrosc 70(5):1120–1126. https://doi.org/10.1016/j.saa.2007.10.02710.1016/j.saa.2007.10.027 ↗
74. Taylor RA, Ellis HA, Maragh PT, White NA (2006) The room temperature structures of anhydrous zinc (II) hexanoate and pentadecanoate. J Mol Struct 787(1–3):113–120. https://doi.org/10.1016/j.molstruc.2005.11.00410.1016/j.molstruc.2005.11.004 ↗
75. Narayanan R, Laine RM (2000) Synthesis of soluble aluminium carboxylates directly from aluminium hydroxide. J Mater Chem 10(9):2097–2104. https://doi.org/10.1039/B000724M10.1039/B000724M ↗
76. Dougnac VN, Peoples BC, Quijada R (2011) The effect of nanospheres on the permeability of PA6/SiO2 nanocomposites. Polym Int 60(11):1600–1606. https://doi.org/10.1002/pi.312510.1002/pi.3125 ↗
77. Yan X, Imai Y, Shimamoto D, Hotta Y (2014) Relationship study between crystal structure and thermal/mechanical properties of polyamide 6 reinforced and unreinforced by carbon fiber from macro and local view. Polymer 55(23):6186–6194. https://doi.org/10.1016/j.polymer.2014.09.05210.1016/j.polymer.2014.09.052 ↗
78. Ushakumari L, Varghese HT, Panicker CY, Ertan T, Yildiz I (2008) Vibrational spectroscopic studies and DFT calculations of 4-fluoro-N-(2-hydroxy-4-nitrophenyl) benzamide. J Raman Spectrosc Int J Original Work Aspects Raman Spectr Including Higher Order Process Brillouin Rayleigh Scatter 39(12):1832–1839. https://doi.org/10.1002/jrs.204710.1002/jrs.2047 ↗
79. Bishop J, Madejova J, Komadel P, Froschl H (2002) The influence of structural Fe, Al and Mg on the infrared OH bands in spectra of dioctahedral smectites. Clay Miner 37(4):607–61610.1180/0009855023740063 ↗
80. Bell S, Drew BR, Guirgis GA, Durig JR (2000) The far infrared spectrum, ab initio calculations and conformational energy differences of 1-butene. J Mol Struct 553(1–3):199–21910.1016/S0022-2860(00)00572-X ↗
81. Hadjiivanov KI, Panayotov DA, Mihaylov MY, Ivanova EZ, Chakarova KK, Andonova SM, Drenchev NL (2020) Power of infrared and raman spectroscopies to characterize metal-organic frameworks and investigate their interaction with guest molecules. Chem Rev 121(3):1286–142410.1021/acs.chemrev.0c00487 ↗
82. Saito K, Xu T, Ishikita H (2022) Correlation between C═ O stretching vibrational frequency and pKa shift of carboxylic acids. J Phys Chem B 126(27):4999–500610.1021/acs.jpcb.2c02193 ↗
83. Webber J et al (2016) Identification of α-Al 2 O 3 surface sites and their role in the adsorption of stearic acid. J Mater Sci 51:5170–518410.1007/s10853-016-9819-5 ↗
84. Raman Strunk J, Bañares MA, Wachs IE (2017) Vibrational spectroscopy of oxide overlayers. Top Catal 60:1577–161710.1007/s11244-017-0841-x ↗
85. Gao J, Sato H (2025) Study on the Brill transition of polyamide 6 with different crystal forms using low- and high-frequency Raman spectroscopy. RSC Adv 15(2224–2230). https://doi.org/10.1039/D4RA08523J10.1039/D4RA08523J ↗
86. Gallinella E, Cadioli B (1997) Infrared and Raman spectra, ab initio force field and vibrational assignment of the rotational isomers of 1-butene. Vib Spectrosc 13(2):163–17410.1016/S0924-2031(96)00056-2 ↗
87. Kulak AI, Bondarava GV, Shchurevich OA (2013) Band gap energy and optical transitions in polyenes formed by thermal decomposition of polyvinyl alcohol. J Appl Spectrosc 80:384–38810.1007/s10812-013-9778-4 ↗
88. Filatova EO, Konashuk AS (2015) Interpretation of the changing the band gap of Al2O3 depending on its crystalline form: connection with different local symmetries. J Phys Chem C 119(35):20755–2076110.1021/acs.jpcc.5b06843 ↗
89. Vasquez J et al (2010) Titanium dioxide/amine hybrid nanotubes. Optical properties and behaviour as lithium–ion electrode. Electrochim. Acta 55:1373–1379. https://doi.org/10.1016/j.electacta.2009.05.01010.1016/j.electacta.2009.05.010 ↗
90. Abellán D, Nart J, Pascual A, Cohen RE, Sanz-Moliner JD (2016) Physical and mechanical evaluation of five suture materials on three knot configurations: an in vitro study. Polymers 8(4):147. https://doi.org/10.3390/polym804014710.3390/polym8040147 ↗
91. Pensalfini M, Meneghello S, Lintas V, Bircher K, Ehret AE, Mazza E (2018) The suture retention test, revisited and revised. J Mech Behav Biomed Mater 77:711–717. https://doi.org/10.1016/j.jmbbm.2017.08.02110.1016/j.jmbbm.2017.08.021 ↗
92. Karaca E, Hockenberger AS (2008) Analysis of the fracture morphology of polyamide, polyester, polypropylene, and silk sutures before and after implantation in vivo. J Biomed Mater Res Part B Appl Biomater Official J Soc Biomater Japanese Soc Biomater Australian Soc Biomater Korean Soc Biomater 87(2):580–589. https://doi.org/10.1002/jbm.b.3113610.1002/jbm.b.31136 ↗
93. Exley C (2016) The toxicity of aluminium in humans. Morphologie 100(329):51–55. https://doi.org/10.1016/j.morpho.2015.12.00310.1016/j.morpho.2015.12.003 ↗
94. Lopez GP, Albers MW, Schreiber SL, Carroll R, Peralta E, Whitesides GM (1993) Convenient methods for patterning the adhesion of mammalian cells to surfaces using self-assembled monolayers of alkanethiolates on gold. J Am Chem Soc 115(13):5877–5878. https://doi.org/10.1021/ja00066a08710.1021/ja00066a087 ↗
95. Sainio A, Järveläinen H (2020) Extracellular matrix-cell interactions: Focus on therapeutic applications. Cell Signal 66:109487. https://doi.org/10.1016/j.cellsig.2019.10948710.1016/j.cellsig.2019.109487 ↗
96. Kubová O, Švorčík V, Heitz J, Moritz S, Romanin C, Matĕjka P, Macková A (2007) Characterization and cytocompatibility of carbon layers prepared by photo-induced chemical vapor deposition. Thin Solid Films 515(17):6765–6772. https://doi.org/10.1016/j.tsf.2007.02.01410.1016/j.tsf.2007.02.014 ↗
97. Shchukarev A, Malekzadeh BÖ, Ransjö M, Tengvall P, Westerlund A (2017) Surface characterization of insulin-coated Ti6Al4V medical implants conditioned in cell culture medium: An XPS study. J Electron Spectrosc Relat Phenom 216:33–38. https://doi.org/10.1016/j.elspec.2017.03.00110.1016/j.elspec.2017.03.001 ↗
98. Yao X, Peng R, Ding J (2013) Cell–material interactions revealed via material techniques of surface patterning. Adv Mater 25(37):5257–5286. https://doi.org/10.1002/adma.20130176210.1002/adma.201301762 ↗
99. Liu A, Liu G, Zhu H, Shin B, Fortunato E, Martins R, Shan F (2015) Eco-friendly water-induced aluminum oxide dielectrics and their application in a hybrid metal oxide/polymer TFT. RSC Adv 5(105):86606–8661310.1039/C5RA15370K ↗
100. UNI E (2018) 10993–1: 2018; Biological evaluation of medical devices—part 1: evaluation and testing within a risk management process. ISO: Geneva, Switzerland.