Study on microstructure regulation and hot bending deformation behavior of 6005A alloy fabricated by low-frequency electromagnetic casting
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Dursun T, Soutis C (2014) Recent developments in advanced aircraft aluminium alloys. Mater Des 1980–2015(56):862–871. https://doi.org/10.1016/j.matdes.2013.12.00210.1016/j.matdes.2013.12.002 ↗
2. Asadi F, Rezaei Ashtiani HR, Pak A (2020) Experimental and simulation investigation on the ultrasonic-assisted bending of annealed and aged AA6061 aluminum alloy sheets. Trans Indian Inst Met 73:2851–2859. https://doi.org/10.1007/s12666-020-02087-410.1007/s12666-020-02087-4 ↗
3. Muhammad W, Brahme AP, Ali U, Hirsch J, Engler O, Aretz H, Kang J, Mishra RK, Inal K (2019) Bendability enhancement of an age-hardenable aluminum alloy: Part II-multiscale numerical modeling of shear banding and fracture. Mater Sci Eng A 754:161–177. https://doi.org/10.1016/j.msea.2019.03.05010.1016/j.msea.2019.03.050 ↗
4. Muhammad W, Kang J, Brahme AP, Ali U, Hirsch J, Brinkman H-J, Engler O, Mishra RK, Inal K (2019) Bendability enhancement of an age-hardenable aluminum alloy: Part I-relationship between microstructure, plastic deformation and fracture. Mater Sci Eng, A 753:179–191. https://doi.org/10.1016/j.msea.2019.03.05310.1016/j.msea.2019.03.053 ↗
5. Zhan X, Tang J, Tu W, Liu W, Cao L, Ye L, Yuan X, Cao G, Zhang Y, Ma L (2024) Evolution of microstructure, texture and formability of Al-Mg-Si alloys at different hot rolling finish temperatures. J Mater Res Technol 32:318–337. https://doi.org/10.1016/j.jmrt.2024.07.10810.1016/j.jmrt.2024.07.108 ↗
6. Prillhofer R, Rank G, Berneder J, Antrekowitsch H, Uggowitzer P J, Pogatscher S (2014) Property criteria for automotive Al-Mg-Si sheet alloys. 7:5047–506810.3390/ma7075047 ↗
7. Mattei L, Daniel D, Guiglionda G, Klöcker H, Driver J (2013) Strain localization and damage mechanisms during bending of AA6016 sheet. Mater Sci Eng A 559:812–821. https://doi.org/10.1016/j.msea.2012.09.02810.1016/j.msea.2012.09.028 ↗
8. Davidkov A, Petrov RH, De Smet P, Schepers B, Kestens LAI (2011) Microstructure controlled bending response in AA6016 Al alloys. Mater Sci Eng A 528:7068–7076. https://doi.org/10.1016/j.msea.2011.05.05510.1016/j.msea.2011.05.055 ↗
9. Li D, Hou X, Ma Z, Li X, Le Q, Liao Q (2024) Study on microstructure evolution and deformation behavior of Mg-Zn base alloy pipes during hot bending. J Mater Res Technol 32:1856–1867. https://doi.org/10.1016/j.jmrt.2024.08.03410.1016/j.jmrt.2024.08.034 ↗
10. Bilston D, Ruan D, Candido A, Durandet Y (2019) Parametric study of the cross-section shape of aluminium tubes in dynamic three-point bending. Thin-Walled Struct 136:315–322. https://doi.org/10.1016/j.tws.2018.12.03210.1016/j.tws.2018.12.032 ↗
11. Li Y, Wu Z, Wang D, Nagaumi H, Zhang G, Feng Z, Luo X, Luo Y, Zhang H, Zhang B (2025) Synergistic enhancement of strength and bendability of Al-Mg-Si-Cu alloys for safety components by adding Mn. Mater Des 249:113531. https://doi.org/10.1016/j.matdes.2024.11353110.1016/j.matdes.2024.113531 ↗
12. Wu PD, MacEwen SR, Lloyd DJ, Neale KW (2004) Effect of cube texture on sheet metal formability. Mater Sci Eng A 364:182–187. https://doi.org/10.1016/j.msea.2003.08.02010.1016/j.msea.2003.08.020 ↗
13. Ikawa S, Asano M, Kuroda M, Yoshida K (2011) Effects of crystal orientation on bendability of aluminum alloy sheet. Mater Sci Eng A 528:4050–4054. https://doi.org/10.1016/j.msea.2011.01.04810.1016/j.msea.2011.01.048 ↗
14. Kuroda M, Tvergaard V (2007) Effects of texture on shear band formation in plane strain tension/compression and bending. Int J Plast 23:244–272. https://doi.org/10.1016/j.ijplas.2006.03.01410.1016/j.ijplas.2006.03.014 ↗
15. Lu G, Wang J, Liu Y, Liu C (2020) Effect of heating rate during solution treatment on the bendability of Al-Mg-Si alloys. Mater Sci Eng A 791:139604. https://doi.org/10.1016/j.msea.2020.13960410.1016/j.msea.2020.139604 ↗
16. Jeon JG, Shin JH, Shin SE, Bae DH (2021) Improvement in the anisotropic mechanical properties and formability of Al-Si-Mg-Cu-based alloy sheets. Mater Sci Eng A 799:140199. https://doi.org/10.1016/j.msea.2020.14019910.1016/j.msea.2020.140199 ↗
17. Castany P, Diologent F, Rossoll A, Despois JF, Bezençon C, Mortensen A (2013) Influence of quench rate and microstructure on bendability of AA6016 aluminum alloys. Mater Sci Eng A 559:558–565. https://doi.org/10.1016/j.msea.2012.08.14110.1016/j.msea.2012.08.141 ↗
18. Sarkar J, Kutty TRG, Wilkinson DS, Embury JD, Lloyd DJ (2004) Tensile properties and bendability of T4 treated AA6111 aluminum alloys. Mater Sci Eng A 369:258–266. https://doi.org/10.1016/j.msea.2003.11.02210.1016/j.msea.2003.11.022 ↗
19. Du J, Guo M, Lu W, Dong Q, Zhuang L (2023) Coupling effect of P, Ni micro-alloying and thermomechanical processing on microstructure evolution and high formability of Al-Mg-Si-Cu-Zn-Fe alloys. J Alloy Compd 952:170009. https://doi.org/10.1016/j.jallcom.2023.17000910.1016/j.jallcom.2023.170009 ↗
20. Wang F, Wang N, Yu F, Wang X, Cui J (2020) Study on micro-structure, solid solubility and tensile properties of 5A90 Al-Li alloy cast by low-frequency electromagnetic casting processing. J Alloys Compd 820:153318. https://doi.org/10.1016/j.jallcom.2019.15331810.1016/j.jallcom.2019.153318 ↗
21. Yang L, Chen C, Yu F, Chen C, Liu J, Wang Z, Wang X, Cui J (2023) Coordinated deformation and high formability mechanisms of 7A36 aluminum alloy by Sc micro-alloying and low-frequency electromagnetic casting. J Mater Res Technol 24:5186–5201. https://doi.org/10.1016/j.jmrt.2023.04.15410.1016/j.jmrt.2023.04.154 ↗
22. Yang L, Yu F, Chen C, Xu Y, Song Z, Cui J, Wang X (2023) Bendability and ductility enhancement of 7A36 alloys through adding Sc and applying LFEC with a rapid solid solution heating rate treatment. J Mater Sci 58:13831–13853. https://doi.org/10.1007/s10853-023-08893-710.1007/s10853-023-08893-7 ↗
23. Yang L, Yu F, Chen C, Xu Y, Song Z, Cui J, Wang X (2024) Synergetic effect of Sc micro-alloying and low-frequency electromagnetic casting in 7A36 aluminum alloy with enhanced mechanical and corrosion properties. Metals Mater Int 30:2110–2126. https://doi.org/10.1007/s12540-024-01662-410.1007/s12540-024-01662-4 ↗
24. Yang L, Yu F, Chen C, Song Z, Xu Y, Chen C, Song D, He G, Cui J, Wang X (2025) Study on microstructure evolution, three-point bending behavior and mechanical properties of 6005 A alloy by low-frequency electromagnetic casting. Mater Today Commun 45:112211. https://doi.org/10.1016/j.mtcomm.2025.11221110.1016/j.mtcomm.2025.112211 ↗
25. Bachmann F, Hielscher R, Schaeben H (2011) Grain detection from 2d and 3d EBSD data-specification of the MTEX algorithm. Ultramicroscopy 111:1720–1733. https://doi.org/10.1016/j.ultramic.2011.08.00210.1016/j.ultramic.2011.08.002 ↗
26. Lodgaard L, Ryum N (2000) Precipitation of dispersoids containing Mn and/or Cr in Al-Mg-Si alloys. Mater Sci Eng, A 283:144–152. https://doi.org/10.1016/S0921-5093(00)00734-610.1016/S0921-5093(00)00734-6 ↗
27. Zandbergen HW, Andersen SJ, Jansen J (1997) Science 277:1221–1225. https://doi.org/10.1126/science.277.5330.122110.1126/science.277.5330.1221 ↗
28. van Huis MA, Chen JH, Sluiter MHF, Zandbergen HW (2007) Phase stability and structural features of matrix-embedded hardening precipitates in Al-Mg-Si alloys in the early stages of evolution. Acta Mater 55:2183–2199. https://doi.org/10.1016/j.actamat.2006.11.01910.1016/j.actamat.2006.11.019 ↗
29. Esmaeili S, Wang X, Lloyd DJ, Poole WJ (2003) On the precipitation-hardening behavior of the Al-Mg-Si-Cu alloy AA6111. Metall and Mater Trans A 34:751–763. https://doi.org/10.1007/s11661-003-0110-410.1007/s11661-003-0110-4 ↗
30. Chen H, Lu J, Kong Y, Li K, Yang T, Meingast A, Yang M, Lu Q, Du Y (2020) Atomic scale investigation of the crystal structure and interfaces of the β′ precipitate in Al-Mg-Si alloys. Acta Mater 185:193–203. https://doi.org/10.1016/j.actamat.2019.11.05910.1016/j.actamat.2019.11.059 ↗
31. Keblinski P, Yamakov V (2003) Effect of high-temperature structure and diffusion on grain-boundary diffusion creep in fcc metals. Interface Sci 11:111–120. https://doi.org/10.1023/A:102159520918510.1023/A:1021595209185 ↗
32. Zuo L, Ye B, Feng J, Kong X, Jiang H, Ding W (2018) Microstructure, tensile properties and creep behavior of Al-12Si-3.5Cu-2Ni-0.8Mg alloy produced by different casting technologies. J Mater Sci Technol 34:1222–1228. https://doi.org/10.1016/j.jmst.2017.06.01110.1016/j.jmst.2017.06.011 ↗
33. Birosca S, Liu G, Ding R, Jiang J, Simm T, Deen C, Whittaker M (2019) The dislocation behaviour and GND development in a nickel based superalloy during creep. Int J Plast 118:252–268. https://doi.org/10.1016/j.ijplas.2019.02.01510.1016/j.ijplas.2019.02.015 ↗
34. Hu X, Han X, Hua L, Zhang J, Xu J, Chai F, Zhuang W, Zheng F (2024) Microstructure inheriting evolution and strength-plasticity collaborative improvement mechanism of multidirectional rotary forged Al7075 sheets during T6 heat treatment. J Mater Sci Technol 203:14–38. https://doi.org/10.1016/j.jmst.2024.03.04310.1016/j.jmst.2024.03.043 ↗
35. Yoo YSJ, Lim H, Emery J, Kacher J (2019) Relating microstructure to defect behavior in AA6061 using a combined computational and multiscale electron microscopy approach. Acta Mater 174:81–91. https://doi.org/10.1016/j.actamat.2019.05.03310.1016/j.actamat.2019.05.033 ↗
36. Zuo Y, Cui J, Zhao Z, Zhang H, Li L, Zhu Q (2012) Mechanism of grain refinement of an Al-Zn-Mg-Cu alloy prepared by low-frequency electromagnetic casting. J Mater Sci 47:5501–5508. https://doi.org/10.1007/s10853-012-6441-z10.1007/s10853-012-6441-z ↗
37. Chen D, Zhang H, Wang X, Cui J (2011) Investigation on micro-segregation of Al-4.5%Cu alloy produced by low frequency electromagnetic casting. Acta Metall Sin 47(2):185–190. https://doi.org/10.3724/SP.J.1037.2010.0042710.3724/SP.J.1037.2010.00427 ↗
38. Wang X, Embury JD, Poole WJ, Esmaeili S, Lloyd DJ (2003) Precipitation strengthening of the aluminum alloy AA6111. Metall Mater Trans A 34:2913–2924. https://doi.org/10.1007/s11661-003-0191-010.1007/s11661-003-0191-0 ↗
39. Zhang S-Y, Wang X, Liu X, Mo Y-T, Wang C, Cheng T, Ivasishin O, Wang H-Y (2022) High strength-ductility synergy induced by sub-rapid solidification in twin-roll cast Al-Mg-Si alloys. J Mater Res Technol 16:922–933. https://doi.org/10.1016/j.jmrt.2021.12.05510.1016/j.jmrt.2021.12.055 ↗
40. Lei S, Xu Z, Peng L, Lai X (2021) Effect of grain size on the ductile-brittle fracture behavior of commercially pure titanium sheet metals. Mater Sci Eng A 822:141630. https://doi.org/10.1016/j.msea.2021.14163010.1016/j.msea.2021.141630 ↗
41. Lademo OG, Pedersen KO, Berstad T, Furu T, Hopperstad OS (2008) An experimental and numerical study on the formability of textured AlZnMg alloys. Eur J Mech-A/Solids 27:116–140. https://doi.org/10.1016/j.euromechsol.2007.06.00310.1016/j.euromechsol.2007.06.003 ↗
42. Raabe D, Sachtleber M, Weiland H, Scheele G, Zhao Z (2003) Grain-scale micromechanics of polycrystal surfaces during plastic straining. Acta Mater 51:1539–1560. https://doi.org/10.1016/S1359-6454(02)00557-810.1016/S1359-6454(02)00557-8 ↗
43. Rakshit R, Sarkar A, Panda SK, Mandal S (2022) Influence of out-of-plane stretch forming induced different strain paths on micro-texture evolution, slip system activity and Taylor factor distribution in Al-Li alloy. Mater Sci Eng A 830:142267. https://doi.org/10.1016/j.msea.2021.14226710.1016/j.msea.2021.142267 ↗
44. Li Z, Zhao P, Jia Z, Liu Z, Xie Z (2019) Effects of Mg and Si contents on the microstructure and mechanical properties of AA6014 alloys in T4P and T6P temper. Mater Sci Eng A 740–741:187–200. https://doi.org/10.1016/j.msea.2018.10.04310.1016/j.msea.2018.10.043 ↗
45. Sidor JJ, Decroos K, Petrov RH, Kestens LAI (2015) Evolution of recrystallization textures in particle containing Al alloys after various rolling reductions: experimental study and modeling. Int J Plast 66:119–137. https://doi.org/10.1016/j.ijplas.2014.08.00910.1016/j.ijplas.2014.08.009 ↗
46. Engler O, Kong XW, Yang P (1997) Influence of particle stimulated nucleation on the recrystallization textures in cold deformed Al-alloys Part I-experimental observations. Scr Mater 37:1665–1674. https://doi.org/10.1016/S1359-6462(97)00315-110.1016/S1359-6462(97)00315-1 ↗
47. Alaneme KK, Okotete EA (2019) Recrystallization mechanisms and microstructure development in emerging metallic materials: a review. J Sci: Adv Mater Dev 4:19–33. https://doi.org/10.1016/j.jsamd.2018.12.00710.1016/j.jsamd.2018.12.007 ↗
48. Martin JW, Doherty RD, Cantor B (1997) Stability of Microstructure in Metallic Systems. 2 ed. Cambridge Solid State Science Series. Cambridge: Cambridge University Press10.1017/CBO9780511623134 ↗
49. Chen X, Guo M, Qiao D, Liu L, Yu K, Zhuang L (2024) Simultaneously enhanced strength, ductility and formability of Al-Mg-Si-Cu-Zn-Fe-Mn alloy sheets by coupling distribution of solute, phases and grains. Mater Charact 209:113720. https://doi.org/10.1016/j.matchar.2024.11372010.1016/j.matchar.2024.113720 ↗
50. Zhang J, Ma M, Shen F, Yi D, Wang B (2018) Influence of deformation and annealing on electrical conductivity, mechanical properties and texture of Al-Mg-Si alloy cables. Mater Sci Eng, A 710:27–37. https://doi.org/10.1016/j.msea.2017.10.06510.1016/j.msea.2017.10.065 ↗
51. Wang Z, Chen M, Jiang H, Li H, Li S (2020) Effect of artificial ageing on strength and ductility of an Al-Cu-Mg-Mn alloy subjected to solutionizing and room-temperature rolling. Mater Charact 165:110383. https://doi.org/10.1016/j.matchar.2020.11038310.1016/j.matchar.2020.110383 ↗
52. Wang R, Zuo Y, Zhu Q, Guo X, Liu X (2024) Investigation of microstructure, texture evolution and plastic anisotropy of short-time homogenized MS-DC cast 2024 aluminum alloy during rolling and annealing. Mater Sci Eng, A 899:146392. https://doi.org/10.1016/j.msea.2024.14639210.1016/j.msea.2024.146392 ↗
53. Sun Z-C, Zheng L-S, Yang H (2014) Softening mechanism and microstructure evolution of as-extruded 7075 aluminum alloy during hot deformation. Mater Charact 90:71–80. https://doi.org/10.1016/j.matchar.2014.01.01910.1016/j.matchar.2014.01.019 ↗
54. Chen D, Xu S, Kulkarni Y (2020) Atomistic mechanism for vacancy-enhanced grain boundary migration. Phys Rev Mater 4:033602. https://doi.org/10.1103/PhysRevMaterials.4.03360210.1103/PhysRevMaterials.4.033602 ↗