Phase-field analysis of anisotropic interfacial energy influence on microstructure evolution in directional and rotating directional solidification of ternary eutectics
Source abstract
Abstract
Abstract The formation of cuboid fibers in Ni-Al-Mo and $$[\alpha \beta ]_a[\alpha \delta ]_b$$ superstructures in Bi-In-Sn ternary eutectics, driven by anisotropic interfacial energies, is investigated. To explain the formed superstructures ( $$\alpha$$ , $$\beta$$ and $$\delta$$ solid phase arrangement mechanism), a morphology map is developed based on Directional Solidification (DS) simulation results. It is assumed that phase omission potentially occurs in locked grains, where interface anisotropy influences microstructure evolution in the following manner: Anisotropic $$\alpha \beta$$ interfaces can drive the elimination of either the $$\alpha$$ or $$\beta$$ layers in $$\alpha \beta$$ bilayers, while $$\alpha \delta$$ interface anisotropy can lead to the removal of either the $$\alpha$$ or $$\delta$$ layers in $$\alpha \delta$$ bilayers. This mechanism accounts for the formation of $$\alpha \beta \alpha \delta$$ motifs in quasi-isotropic grains and the emergence of $$\alpha \beta \delta$$ or $$[\alpha \beta ]_a[\alpha \delta ]_b$$ units in locked grains. It is additionally noted that $$\alpha \beta$$ anisotropy in locked grains exerts a stronger influence on microstructural development than $$\alpha \delta$$ anisotropy. Subsequent rotating DS (RDS) simulations provide additional supporting evidence for the assumed formation mechanisms. The radius profile of solidified floating grains exhibits a straight spiral pattern, whereas in locked grains, it follows a tilted spiral, with the tilt angle varying proportionally to anisotropy strength. Notably, the activation of anisotropy in any interface affects neighboring interfaces, even when they are modeled isotropically. Graphical abstract
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Hoyle R, McFadden G, Davis S (1996) Pattern selection with anisotropy during directional solidification. Philos Trans R Soc London Ser A Math Phys Eng Sci 354(1721):2915–294910.1098/rsta.1996.0135 ↗
2. Norris SA, Davis SH, Watson SJ, Voorhees PW (2008) Faceted interfaces in directional solidification. J Cryst Growth 310(2):414–42710.1016/j.jcrysgro.2007.10.048 ↗
3. Ming-Wen C, Man L, Lin Y, Yu-Yan W, Zi-Dong W, Jian-Jun X (2009) The effect of anisotropic surface tension on the morphological stability of planar interface during directional solidification. Chin Phys B 18(4):169110.1088/1674-1056/18/4/069 ↗
4. Wang LL, Wang ZJ, Lin X, Wang M, Huang WD (2012) The effect of interfacial energy anisotropy on planar interface instability in a succinonitrile alloy under a small temperature gradient. Chin Phys B 21(6):06680110.1088/1674-1056/21/6/066801 ↗
5. Zhang J, Jun S, Shang Z, Lei W, Fu H (2013) Directional solidification and characterization of NiAl-9 Mo eutectic alloy. Trans Nonferrous Metals Soc China 23(12):3499–350710.1016/S1003-6326(13)62894-0 ↗
6. Ruggiero M, Rutter J (1997) Origin of microstructure in the 332 K eutectic of the Bi–In–Sn system. Mater Sci Technol 13(1):5–1110.1179/mst.1997.13.1.5 ↗
7. Witusiewicz V, Hecht U, Rex S, Apel M (2005) In situ observation of microstructure evolution in low-melting Bi–In–Sn alloys by light microscopy. Acta Mater 53(13):3663–366910.1016/j.actamat.2005.04.015 ↗
8. Rex S, Böttger B, Witusiewicz V, Hecht U (2005) Transient eutectic solidification in In–Bi–Sn: two-dimensional experiments and numerical simulation. Mater Sci Eng, A 413:249–25410.1016/j.msea.2005.09.019 ↗
9. Bottin-Rousseau S, Şerefoğlu M, Yücetürk S, Faivre G, Akamatsu S (2016) Stability of three-phase ternary-eutectic growth patterns in thin sample. Acta Mater 109:259–26610.1016/j.actamat.2016.01.065 ↗
10. Mohagheghi S, Şerefoğlu M (2017) Dynamics of spacing adjustment and recovery mechanisms of ABAC-type growth pattern in ternary eutectic systems. J Cryst Growth 470:66–7410.1016/j.jcrysgro.2017.04.008 ↗
11. Woodruff DP, Ward I (1973) The Solid-liquid Interface. Cambridge University Press UK 1:77–100
12. Karma A (1987) Beyond steady-state lamellar eutectic growth. Phys Rev Lett 59(1):7110.1103/PhysRevLett.59.71 ↗
13. Kassner K, Valance A, Misbah C, Temkin D (1993) New broken-parity state and a transition to anomalous lamellae in eutectic growth. Phys Rev E 48(2):109110.1103/PhysRevE.48.1091 ↗
14. Karma A, Sarkissian A (1996) Morphological instabilities of lamellar eutectics. Metall Mater Trans A 27(3):635–65610.1007/BF02648952 ↗
15. Mohagheghi S, Şerefoğlu M (2018) Quasi-isotropic and locked grain growth dynamics in a three-phase eutectic system. Acta Mater 151:432–44210.1016/j.actamat.2018.03.019 ↗
16. Oswald P, Moulin M, Metz P, Géminard J-C, Sotta P, Sallen L (1993) An improved directional growth apparatus for liquid crystals: applications to thermotropic and lyotropic systems. J Phys III 3(9):1891–1907
17. Akamatsu S, Bottin-Rousseau S, Şerefoğlu M, Faivre G (2012) Lamellar eutectic growth with anisotropic interphase boundaries: experimental study using the rotating directional solidification method. Acta Mater 60(6–7):3206–321410.1016/j.actamat.2012.02.033 ↗
18. Zhao Y (2023) Understanding and design of metallic alloys guided by phase-field simulations. NPJ Comput Mater 9(1):9410.1038/s41524-023-01038-z ↗
19. Zhao Y, Xin T, Tang S, Wang H, Fang X, Hou H (2024) Applications of unified phase-field methods to designing microstructures and mechanical properties of alloys. MRS Bull 49(6):613–62510.1557/s43577-024-00720-x ↗
20. Noubary KD, Kellner M, Hötzer J, Seiz M, Seifert HJ, Nestler B (2021) Data workflow to incorporate thermodynamic energies from Calphad databases into grand-potential-based phase-field models. J Mater Sci 56(20):11932–11952. https://doi.org/10.1007/s10853-021-06033-710.1007/s10853-021-06033-7 ↗
21. Dargahi Noubary K, Kellner M, Nestler B (2022) Rotating directional solidification of ternary eutectic microstructures in Bi–In–Sn: a phase-field study. Materials 15(3):1160. https://doi.org/10.3390/ma1503116010.3390/ma15031160 ↗
22. Hötzer J, Reiter A, Hierl H, Steinmetz P, Selzer M, Nestler B (2018) The parallel multi-physics phase-field framework Pace3D. J Comput Sci 26:1–1210.1016/j.jocs.2018.02.011 ↗
23. Software Package Parallel Algorithms for Crystal Evolution in 3 D—Pace3D. [Accessed: August 2025]. https://www.h-ka.de/en/idm/profile/pace3d-software
24. Andersson JO, Helander T, Höglund L, Shi P, Sundman B (2002) Thermo—Calc & DICTRA, computational tools for materials science. Calphad 26(2):273–31210.1016/S0364-5916(02)00037-8 ↗
25. Peng J, Franke P, Seifert HJ (2016) Experimental investigation and Calphad assessment of the eutectic trough in the system NiAl–Cr–Mo. Phase Equilibria Diff 37(5):592–60010.1007/s11669-016-0490-y ↗
26. Witusiewicz VT, Hecht U, Böttger B, Rex S (2007) Thermodynamic re-optimisation of the Bi–In–Sn system based on new experimental data. J Alloy Compd 428(1–2):115–12410.1016/j.jallcom.2006.03.050 ↗
27. Dejmek M, Folch R, Parisi A, Plapp M (2004) Three-dimensional phase-field simulations of directional solidification. arXiv preprint arXiv: cond-mat/0401250
28. Ma W, Li R, Chen H (2020) Three-dimensional ca-lbm model of silicon facet formation during directional solidification. Curr Comput-Aided Drug Des 10(8):669
29. Gurevich S, Karma A, Plapp M, Trivedi R (2010) Phase-field study of three-dimensional steady-state growth shapes in directional solidification. Phys Rev E-Stat Nonlinear Soft Matter Phys 81(1):01160310.1103/PhysRevE.81.011603 ↗
30. Hunt J, Jackson K (1966) Lamellar and rod eutectic growth. Trans Metall Soc AIME 236:1129–1142
31. Plapp M (2011) Unified derivation of phase-field models for alloy solidification from a grand-potential functional. Phys Rev E 84(3):03160110.1103/PhysRevE.84.031601 ↗
32. Choudhury A, Nestler B (2012) Grand-potential formulation for multicomponent phase transformations combined with thin-interface asymptotics of the double-obstacle potential. Phys Rev E 85(2):02160210.1103/PhysRevE.85.021602 ↗
33. Bauer M, Hötzer J, Jainta M, Steinmetz P, Berghoff M, Schornbaum F, Godenschwager C, Köstler H, Nestler B, Rüde U (2015) Massively parallel phase-field simulations for ternary eutectic directional solidification. In: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis, pp. 1– 1210.1145/2807591.2807662 ↗
34. Hötzer J, Tschukin O, Said MB, Berghoff M, Jainta M, Barthelemy G, Smorchkov N, Schneider D, Selzer M, Nestler B (2016) Calibration of a multi-phase field model with quantitative angle measurement. J Mater Sci 51(4):1788–179710.1007/s10853-015-9542-7 ↗
35. Hötzer J, Jainta M, Steinmetz P, Nestler B, Dennstedt A, Genau A, Bauer M, Köstler H, Rüde U (2015) Large scale phase-field simulations of directional ternary eutectic solidification. Acta Mater 93:194–20410.1016/j.actamat.2015.03.051 ↗
36. Steinmetz P, Yabansu YC, Hötzer J, Jainta M, Nestler B, Kalidindi SR (2016) Analytics for microstructure datasets produced by phase-field simulations. Acta Mater 103:192–20310.1016/j.actamat.2015.09.047 ↗
37. Noubary KD, Kellner M, Steinmetz P, Hötzer J, Nestler B (2017) Phase-field study on the effects of process and material parameters on the tilt angle during directional solidification of ternary eutectics. Comput Mater Sci 138:403–411. https://doi.org/10.1016/j.commatsci.2017.07.00610.1016/j.commatsci.2017.07.006 ↗
38. Dargahi Noubary K, Schäfer C, Pauly C, Kellner M, Ott V, Stüber M, Mücklich F, Nestler B (2023) Microstructure evolution in the self-propagating reaction in al/ru bilayers by phase-field simulations and experiments. J Vacuum Sci Technol A. https://doi.org/10.1116/6.000258710.1116/6.0002587 ↗
39. Moelans N (2011) A quantitative and thermodynamically consistent phase-field interpolation function for multi-phase systems. Acta Mater 59(3):1077–1086. https://doi.org/10.1016/j.actamat.2010.10.03810.1016/j.actamat.2010.10.038 ↗
40. Schoof E, Schneider D, Streichhan N, Mittnacht T, Selzer M, Nestler B (2018) Multiphase-field modeling of martensitic phase transformation in a dual-phase microstructure. Int J Solids Struct 134:181–19410.1016/j.ijsolstr.2017.10.032 ↗
41. Kellner M, Hötzer J, Schoof E, Nestler B (2020) Phase-field study of eutectic colony formation in Ni Al-34 Cr. Acta Mater 182:267–27710.1016/j.actamat.2019.10.028 ↗
42. Hinrichs F, Kellner M, Hötzer J, Nestler B (2020) Calibration of a concentration-driven nucleation mechanism for phase-field simulations of eutectic and off-eutectic compositions in AlCu-5 Ag. Scripta Mater 186:89–9410.1016/j.scriptamat.2020.05.018 ↗
43. Kellner M, Hierl H, Nestler B(2024) Influence of the phase fractions on the formation of eutectic colonies: a large-scale phase-field study. Adv Eng Mater, 230176610.1002/adem.202301766 ↗
44. Kellner M, Sprenger I, Steinmetz P, Hötzer J, Nestler B, Heilmaier M (2017) Phase-field simulation of the microstructure evolution in the eutectic NiAl-34 Cr system. Comput Mater Sci 128:379–38710.1016/j.commatsci.2016.11.049 ↗
45. Kellner M, Kunz W, Steinmetz P, Hötzer J, Nestler B (2018) Phase-field study of dynamic velocity variations during directional solidification of eutectic NiAl-34 Cr. Comput Mater Sci 145:291–30510.1016/j.commatsci.2017.12.053 ↗
46. Mohagheghi S, Şerefoğlu M (2019) On the growth dynamics of nearly-locked grain in the three-phase in–bi–sn eutectic system. Metall Mater Trans A 50:5221–523310.1007/s11661-019-05426-3 ↗
47. Garcke H, Stoth B, Nestler B (1999) Anisotropy in multi-phase systems: a phase field approach. Interfaces Free Bound 1(2):175–19810.4171/ifb/8 ↗
48. Mohagheghi S, Şerefoğlu M (2024) On the effect of interphase boundary energy anisotropy on morphologies: A new type of eutectic grain observed in a three-phase eutectic system. Metall Mater Trans A, 1–1410.1007/s11661-024-07389-6 ↗
49. Nestler B, Garcke H, Stinner B (2005) Multicomponent alloy solidification: phase-field modeling and simulations. Phys Rev E 71(4):04160910.1103/PhysRevE.71.041609 ↗
50. Tschukin O, Silberzahn A, Selzer M, Amos PG, Schneider D, Nestler B (2017) Concepts of modeling surface energy anisotropy in phase-field approaches. Geothermal energy 5:1–2110.1186/s40517-017-0077-9 ↗
51. Kobayashi R (1993) Modeling and numerical simulations of dendritic crystal growth. Phys D 63(3):410–42310.1016/0167-2789(93)90120-P ↗
52. Karma A, Rappel W-J (1996) Phase-field method for computationally efficient modeling of solidification with arbitrary interface kinetics. Phys Rev E 53(4):301710.1103/PhysRevE.53.R3017 ↗
53. Taylor JE, Cahn JW, Handwerker CA (1992) Overview no. 98 i-geometric models of crystal growth. Acta Metall Mater 40(7):1443–147410.1016/0956-7151(92)90090-2 ↗
54. Eggleston JJ, McFadden GB, Voorhees PW (2001) A phase-field model for highly anisotropic interfacial energy. Phys D 150(1–2):91–10310.1016/S0167-2789(00)00222-0 ↗
55. Wise S, Kim J, Lowengrub J (2007) Solving the regularized, strongly anisotropic cahn-hilliard equation by an adaptive nonlinear multigrid method. J Comput Phys 226(1):414–44610.1016/j.jcp.2007.04.020 ↗
56. Noubary MSKD (2022) Effects of anisotropy of the interfacial energies on pattern formation within solidification of ternary eutectics: A phase-field study. PhD thesis, Karlsruhe Institute of Technology
57. Hu L, Hu W, Gottstein G, Bogner S, Hollad S, Bührig-Polaczek A (2012) Investigation into microstructure and mechanical properties of NiAl–Mo composites produced by directional solidification. Mater Sci Eng, A 539:211–22210.1016/j.msea.2012.01.083 ↗
58. Akbulut S, Ocak Y, Maraşlı N, Keşlioğlu K, Kaya H, Çadırlı E (2009) Determination of interfacial energies of solid Sn solution in the In–Bi–Sn ternary alloy. Mater Charact 60(3):183–19210.1016/j.matchar.2008.08.010 ↗