Dual-functional drug delivery from 3D printed polylactic acid/glass ceramic scaffolds: combining antibacterial and osteogenic properties for craniofacial applications
Source abstract
Abstract
Orthopedics faces a significant challenge in treating bone defects that are infected. A hopeful treatment approach involves managing infection and repairing bone defects concurrently. This study proposed a composite dual-functional scaffold of antibacterial (vancomycin, VANCO) and osteogenic (simvastatin, SIM) drugs. Glass–ceramic (GC) microparticles were synthesized through spray-drying, loaded with SIM molecules, and coated with carboxymethyl cellulose. A nozzle-based 3D printing method created a composite scaffold containing polylactic acid and SIM-loaded GC microparticles. Following the modification of the scaffold surface with oxygen plasma and attachment of aminosilane, VANCO was applied to the surface as an antibiotic. Adding microparticles to the sample led to a 40% increase in the storage modulus based on dynamic mechanical thermal analysis (DMTA) results, indicating higher stiffness. In the bioactivity test results, the composite sample showed increased apatite formation ability on its surface, with higher density and larger apatite crystals after 7 and 14 days. The surface modification and increase in oxygen groups were verified by analyzing the scaffold surface’s morphological and chemical properties before and after plasma treatment using FESEM, ATR-FTIR, and XPS methods. The drug release behavior observed after one month revealed that VANCO had a sudden release of approximately 60% within the first 24 h, while only 20% of SIM was released during this period. Studies on SIM release modeling across various samples indicate that Korsmeyer–Peppas and Weibull models are valid for analyzing release kinetics. The agar diffusion test (ADT) indicated inhibition zones of around 25 and 56 mm for samples containing GC microparticles and VANCO, respectively. According to the direct contact test (DCT), the scaffold’s antibacterial effectiveness is 98% upon antibiotic release. © The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature 2025.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · 3D Printing in Biomedical Research · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Gundu S, Varshney N, Sahi AK, Mahto SK (2022) Recent developments of biomaterial scaffolds and regenerative approaches for craniomaxillofacial bone tissue engineering. J Polym Res 29(3):1–23. https://doi.org/10.1007/s10965-022-02928-410.1007/s10965-022-02928-4 ↗
2. Lee D, Wufuer M, Kim I, Choi TH, Kim BJ, Jung HG et al (2021) Sequential dual - drug delivery of BMP - 2 and alendronate from hydroxyapatite - collagen scaffolds for enhanced bone regeneration. Sci Rep. https://doi.org/10.1038/s41598-020-80608-310.1038/s41598-020-80608-3 ↗
3. Prasad A, Sankar MR, Katiyar V (2017) State of art on solvent casting particulate leaching method for orthopedic scaffolds fabrication. Mater Today Proc 4(2, Part A):898–90710.1016/j.matpr.2017.01.101 ↗
4. Ma Y, Zhou R, Yang M, Zhang J, Song W, Ma X et al (2025) Electrospinning-based bone tissue scaffold construction: progress and trends. Mater Des 252:11379210.1016/j.matdes.2025.113792 ↗
5. Fereshteh Z (2018) 7—Freeze-drying technologies for 3D scaffold engineering. In: Deng Y, Kuiper JBT-F 3D TES (eds) Functional 3D tissue engineering scaffolds: materials, technologies, and applications. Woodhead Publishing, pp 151–7410.1016/B978-0-08-100979-6.00007-0 ↗
6. Xu Y, Zhang F, Zhai W, Cheng S, Li J, Wang Y (2022) Unraveling of advances in 3D-printed polymer-based bone scaffolds. Polymers. https://doi.org/10.3390/polym1403056610.3390/polym14030566 ↗
7. Askari M, Afzali Naniz M, Kouhi M, Saberi A, Zolfagharian A, Bodaghi M (2021) Recent progress in extrusion 3D bioprinting of hydrogel biomaterials for tissue regeneration: a comprehensive review with focus on advanced fabrication techniques. Biomater Sci 9(3):535–57310.1039/D0BM00973C ↗
8. Tan XP, Tan YJ, Chow CSL, Tor SB, Yeong WY (2017) Metallic powder-bed based 3D printing of cellular scaffolds for orthopaedic implants: a state-of-the-art review on manufacturing, topological design, mechanical properties and biocompatibility. Mater Sci Eng C 76:1328–134310.1016/j.msec.2017.02.094 ↗
9. Budharaju H, Suresh S, Sekar MP, De Vega B, Sethuraman S, Sundaramurthi D et al (2023) Ceramic materials for 3D printing of biomimetic bone scaffolds—current state-of-the-art & future perspectives. Mater Des 231:11206410.1016/j.matdes.2023.112064 ↗
10. Lodewijks L, Blokhuis T, Poeze M (2023) Treatment of very large traumatic bone deffects with a biodegradable polycaprolactone-tricalcium phosphate 3D-printed scaffold: a review of three clinical cases. Orthop Proc. https://doi.org/10.1302/1358-992X.2023.9.06110.1302/1358-992X.2023.9.061 ↗
11. Heo DN, Castro NJ, Lee SJ, Noh H, Zhu W, Zhang LG (2017) Enhanced bone tissue regeneration using a 3D printed microstructure incorporated with a hybrid nano hydrogel. Nanoscale 9(16):5055–506210.1039/C6NR09652B ↗
12. Zarei M, Dargah MS, Azar MH, Alizadeh R, Mahdavi FS, Sayedain SS et al (2023) Enhanced bone tissue regeneration using a 3D—printed poly (lactic acid)/Ti6Al4V composite scaffold with plasma treatment modification. Sci Rep. https://doi.org/10.1038/s41598-023-30300-z10.1038/s41598-023-30300-z ↗
13. Li S, Liu Z, Gao X, Cheng L, Xu Z, Diao Y et al (2024) Preparation and properties of a 3D printed nHA/PLA bone tissue engineering scaffold loaded with a b-CD–CHX combined dECM hydrogel 9848–5910.1039/D4RA00261J ↗
14. Tajbakhsh S, Hajiali F (2017) A comprehensive study on the fabrication and properties of biocomposites of poly(lactic acid)/ceramics for bone tissue engineering. Mater Sci Eng C Mater Biol Appl 70:897–912. https://doi.org/10.1016/j.msec.2016.09.00810.1016/j.msec.2016.09.008 ↗
15. Shi C, Yuan Z, Han F, Zhu C, Li B (2016) Polymeric biomaterials for bone regeneration. Ann Joint 1:27–2710.21037/aoj.2016.11.02 ↗
16. Suárez M, García EF, Fernández A, Píriz RL, Díaz R (2020) Novel antimicrobial phosphate—free glass—ceramic scaffolds for bone tissue regeneration. Sci Rep. https://doi.org/10.1038/s41598-020-68370-y10.1038/s41598-020-68370-y ↗
17. Araújo M, Viveiros R, Philippart A, Miola M, Doumett S, Baldi G et al (2017) Bioactivity, mechanical properties and drug delivery ability of bioactive glass-ceramic scaffolds coated with a natural-derived polymer. Mater Sci Eng C 77:342–351. https://doi.org/10.1016/j.msec.2017.03.16910.1016/j.msec.2017.03.169 ↗
18. Prasad A, Maha Lakshmi A, Murimadugula S, Venkateswara Rao P, Chitra S, Perumal G et al (2024) Texturally-enhanced 55S0P and 45S10P Bioactive Glass ceramic particles: sol-gel fabrication, nano-characterization and comprehensive Bio-evaluation for applications in Bone tissue engineering. Ceram Int 50(17, Part B):30699–3071110.1016/j.ceramint.2024.05.370 ↗
19. Narayanan G, Vernekar VN, Kuyinu EL, Laurencin CT (2016) Poly (lactic acid)-based biomaterials for orthopaedic regenerative engineering. Adv Drug Deliv Rev 107:247–27610.1016/j.addr.2016.04.015 ↗
20. Xiong Z, Yan Y, Wang S, Zhang R, Zhang C (2002) Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition. Scr Mater 46(11):771–77610.1016/S1359-6462(02)00071-4 ↗
21. Pereira HF, Cengiz IF, Silva FS, Reis RL, Oliveira JM (2020) Scaffolds and coatings for bone regeneration. J Mater Sci Mater Med 31(3):1–16. https://doi.org/10.1007/s10856-020-06364-y10.1007/s10856-020-06364-y ↗
22. Feng KC, Pinkas-Sarafova A, Ricotta V, Cuiffo M, Zhang L, Guo Y et al (2018) The influence of roughness on stem cell differentiation using 3D printed polylactic acid scaffolds. Soft Matter 14(48):9838–984610.1039/C8SM01797B ↗
23. Wang P, Yin HM, Li X, Liu W, Chu YX, Wang Y et al (2021) Simultaneously constructing nanotopographical and chemical cues in 3D-printed polylactic acid scaffolds to promote bone regeneration. Mater Sci Eng C 1(118):11145710.1016/j.msec.2020.111457 ↗
24. Li H, Zheng L, Wang M (2021) Biofunctionalized nanofibrous bilayer scaffolds for enhancing cell adhesion, proliferation and osteogenesis. ACS Appl Bio Mater 4(6):5276–5294. https://doi.org/10.1021/acsabm.1c0041410.1021/acsabm.1c00414 ↗
25. Hanson AD, Wall ME, Pourdeyhimi B, Loboa EG (2007) Effects of oxygen plasma treatment on adipose-derived human mesenchymal stem cell adherence to poly(L-lactic acid) scaffolds. J Biomater Sci Polym Ed 18(11):1387–140010.1163/156856207782246812 ↗
26. Saberi A, Behnamghader A, Aghabarari B, Yousefi A, Majda D, Huerta MVM et al (2022) 3D direct printing of composite bone scaffolds containing polylactic acid and spray dried mesoporous bioactive glass-ceramic microparticles. Int J Biol Macromol 15(207):9–2210.1016/j.ijbiomac.2022.02.067 ↗
27. Channasanon S, Udomkusonsri P, Chantaweroad S, Tesavibul P, Tanodekaew S (2017) Gentamicin released from porous scaffolds fabricated by stereolithography 201710.1155/2017/9547896 ↗
28. Cui Y, Liu H, Tian Y, Fan Y, Li S, Wang G et al (2022) Dual-functional composite scaffolds for inhibiting infection and promoting bone regeneration. Mater Today Bio 16(July):100409. https://doi.org/10.1016/j.mtbio.2022.10040910.1016/j.mtbio.2022.100409 ↗
29. Mundy G, Garrett R, Harris S, Chan J, Chen D, Rossini G et al (1999) Stimulation of bone formation in vitro and in rodents by statins. Science 286(5446):1946–194910.1126/science.286.5446.1946 ↗
30. Encarnação IC, Sordi MB, Aragones Á, Müller CMO, Moreira AC, Fernandes CP et al (2019) Release of simvastatin from scaffolds of poly(lactic-co-glycolic) acid and biphasic ceramic designed for bone tissue regeneration. J Biomed Mater Res B Appl Biomater 107(6):2152–216410.1002/jbm.b.34311 ↗
31. Yu WL, Sun TW, Qi C, Zhao HK, Ding ZY, Zhang ZW et al (2017) Enhanced osteogenesis and angiogenesis by mesoporous hydroxyapatite microspheres-derived simvastatin sustained release system for superior bone regeneration. Sci Rep. https://doi.org/10.1038/srep4412910.1038/srep44129 ↗
32. Serra T, Planell JA, Navarro M (2013) High-resolution PLA-based composite scaffolds via 3-D printing technology. Acta Biomater 9(3):5521–5530. https://doi.org/10.1016/j.actbio.2012.10.04110.1016/j.actbio.2012.10.041 ↗
33. Talib RA, Tawakkal I, Abdan K (2011) The influence of mercerised kenaf fibers reinforced polylactic acid composites on dynamic mechanical analysis. Key Eng Mater 472:815–82010.4028/www.scientific.net/KEM.471-472.815 ↗
34. Kokubo T, Takadama H (2006) How useful is SBF in predicting in vivo bone bioactivity? Biomaterials 27(15):2907–291510.1016/j.biomaterials.2006.01.017 ↗
35. Li H, Xia Y, Wu J, He Q, Zhou X, Lu G et al (2012) Surface modification of smooth poly(L-lactic acid) films for gelatin immobilization. ACS Appl Mater Interfaces 4(2):687–69310.1021/am201795g ↗
36. England CG, Miller MC, Kuttan A, Trent JO, Frieboes HB (2015) Release kinetics of paclitaxel and cisplatin from two and three layered gold nanoparticles. Eur J Pharm Biopharm 120–910.1016/j.ejpb.2015.02.017 ↗
37. Dash S, Murthy PN, Nath L, Chowdhury P (2010) Kinetic modeling on drug release from controlled drug delivery systems - PubMed. Acta Pol Pharm 67(3)
38. Bruschi ML (ed) (2015) 5. Mathematical models of drug release. In: Strategies to Modify the Drug Release from Pharmaceutical Systems, pp 63–8610.1016/B978-0-08-100092-2.00005-9 ↗
39. Prabhu M, Ruby Priscilla S, Kavitha K, Manivasakan P, Rajendran V, Kulandaivelu P (2014) In vitro bioactivity and antimicrobial tuning of bioactive glass nanoparticles added with neem (Azadirachta indica) leaf powder. BioMed Res Int. https://doi.org/10.1155/2014/95069110.1155/2014/950691 ↗
40. Moghanian A, Sedghi A, Ghorbanoghli A, Salari E (2018) The effect of magnesium content on in vitro bioactivity, biological behavior and antibacterial activity of sol–gel derived 58S bioactive glass. Ceram Int 44(8):9422–9432. https://doi.org/10.1016/j.ceramint.2018.02.15910.1016/j.ceramint.2018.02.159 ↗
41. Ma J, Chen CZ, Wang DG, Meng XG, Shi JZ (2010) Influence of the sintering temperature on the structural feature and bioactivity of sol–gel derived SiO2–CaO–P2O5 bioglass. Ceram Int 36:1911–191610.1016/j.ceramint.2010.03.017 ↗
42. Wu X, Walsh K, Hoff BL, Camci-Unal G (2020) Mineralization of biomaterials for bone tissue engineering. Bioengineering 7(4):1–2410.3390/bioengineering7040132 ↗
43. Paarakh P, Jose PA, Setty CM, Christoper P (2019) Release kinetics—concepts and appications. Int J Pharm Res Technol 8(1).
44. Siepmann J, Siepmann F (2012) Modeling of diffusion controlled drug delivery. J Control Release 161(2):351–362. https://doi.org/10.1016/j.jconrel.2011.10.00610.1016/j.jconrel.2011.10.006 ↗
45. Al-Harbi N, Mohammed H, Al-Hadeethi Y, Bakry AS, Umar A, Hussein MA et al (2021) Silica-based bioactive glasses and their applications in hard tissue regeneration: a review. Pharmaceuticals 14(2):1–2010.3390/ph14020075 ↗
46. Liu YC, Lo GJ, Shyu VBH, Tsai CH, Chen CH, Chen CT (2023) Surface modification of polylactic acid bioscaffold fabricated via 3D printing for craniofacial bone tissue engineering. Int J Mol Sci. https://doi.org/10.3390/ijms24241741010.3390/ijms242417410 ↗
47. Wang X, Jiang M, Zhou Z, Gou J, Hui D (2017) 3D printing of polymer matrix composites: a review and prospective. Compos Part B Eng 1(110):442–45810.1016/j.compositesb.2016.11.034 ↗
48. Turnbull G, Clarke J, Picard F, Riches P, Jia L, Han F et al (2018) 3D bioactive composite scaffolds for bone tissue engineering. Bioact Mater 3:278–314
49. Kao CT, Lin CC, Chen YW, Yeh CH, Fang HY, Shie MY (2015) Poly(dopamine) coating of 3D printed poly(lactic acid) scaffolds for bone tissue engineering. Mater Sci Eng C 56:165–173. https://doi.org/10.1016/j.msec.2015.06.02810.1016/j.msec.2015.06.028 ↗
50. Lee S, Matsugaki A, Kasuga T, Nakano T (2019) Development of bifunctional oriented bioactive glass/poly(lactic acid) composite scaffolds to control osteoblast alignment and proliferation. J Biomed Mater Res A 107(5):1031–104110.1002/jbm.a.36619 ↗
51. Almeida CR, Serra T, Oliveira MI, Planell JA, Barbosa MA, Navarro M (2014) Impact of 3-D printed PLA- and chitosan-based scaffolds on human monocyte/macrophage responses: unraveling the effect of 3-D structures on inflammation. Acta Biomater 10(2):613–622. https://doi.org/10.1016/j.actbio.2013.10.03510.1016/j.actbio.2013.10.035 ↗
52. Zhang H, Mao X, Du Z, Jiang W, Han X, Zhao D et al (2016) Three dimensional printed macroporous polylactic acid/hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model. Sci Technol Adv Mater 17(1):136–148. https://doi.org/10.1080/14686996.2016.114553210.1080/14686996.2016.1145532 ↗
53. Gonc C, Pinto A, Machado AV, Moreira J, Gonc C (2016) Biocompatible reinforcement of poly (lactic acid) with graphene nanoplatelets, pp 1–13
54. Pandele AM, Constantinescu A, Radu IC, Miculescu F, Voicu SI, Ciocan LT (2020) Synthesis and characterization of PLA-micro-structured hydroxyapatite composite films. Materials (Basel) 13(2):1–1310.3390/ma13020274 ↗
55. Aparecida I, Brito W, Suelen S, Amaral S (2019) In vitro bioactivity and biological assays of porous membranes of the poly (lactic acid) containing calcium silicate fibers. Polym Bull. https://doi.org/10.1007/s00289-019-03021-510.1007/s00289-019-03021-5 ↗
56. Chapple S, Anandjiwala R, Ray SS (2013) Mechanical, thermal, and fire properties of polylactide/starch blend/clay composites. J Therm Anal Calorim 113(2):703–71210.1007/s10973-012-2776-6 ↗
57. Fukushima K, Tabuani D, Arena M, Gennari M, Camino G (2013) Effect of clay type and loading on thermal, mechanical properties and biodegradation of poly(lactic acid) nanocomposites. React Funct Polym 73(3):540–54910.1016/j.reactfunctpolym.2013.01.003 ↗
58. Zhang H, Huang J, Yang L, Chen R, Zou W, Lin X et al (2015) Preparation, characterization and properties of PLA/TiO2 nanocomposites based on a novel vane extruder. RSC Adv 5(6):4639–464710.1039/C4RA14538K ↗
59. Fei P, Fei B, Yu Y, Xiong H, Tan J (2014) Thermal properties and crystallization behavior of bamboo fiber/high-density polyethylene composites: Nano-TiO2 effects. J Appl Polym Sci. https://doi.org/10.1002/app.3984610.1002/app.39846 ↗
60. Yu T, Li Y, Ren J (2009) Preparation and properties of short natural fiber reinforced poly(lactic acid) composites. Trans Nonferrous Met Soc China 19:651–655. https://doi.org/10.1016/S1003-6326(10)60126-410.1016/S1003-6326(10)60126-4 ↗
61. Nagendra PS, Prasad VVS, Ramji K (2017) A study on dynamic mechanical analysis of natural nano banana particle filled polymer matrix composites. Mater Today Proc 4(8):9081–9086. https://doi.org/10.1016/j.matpr.2017.07.26210.1016/j.matpr.2017.07.262 ↗
62. Dipl.-Chem Hanke T, Heinemann S, Worch H (2008) Composite from a silicate and mineralized with calcium phosphate phases collagen matrix, process for their preparation and their use
63. Zhao YQ, Cheung HY, Lau KT, Xu CL, Zhao DD, Li HL (2010) Silkworm silk/poly(lactic acid) biocomposites: dynamic mechanical, thermal and biodegradable properties. Polym Degrad Stab 95(10):1978–1987. https://doi.org/10.1016/j.polymdegradstab.2010.07.01510.1016/j.polymdegradstab.2010.07.015 ↗
64. Ne Z, Zheng K, Liverani L, Nawaz Q, Galusková D, Ka H et al (2019) Multifunctional zinc ion doped sol – gel derived mesoporous bioactive glass nanoparticles for biomedical applications. Bioactive Materials 4(June):312–321
65. Ferraris S, Yamaguchi S, Barbani N, Cazzola M, Cristallini C, Miola M et al (2020) Bioactive materials: In vitro investigation of different mechanisms of hydroxyapatite precipitation. Acta Biomater 102:468–480. https://doi.org/10.1016/j.actbio.2019.11.02410.1016/j.actbio.2019.11.024 ↗
66. Liu S, Zheng Y, Wu Z, Hu J, Liu R (2020) Preparation and characterization of aspirin-loaded polylactic acid/graphene oxide biomimetic nanofibrous scaffolds. Polymer (Guildf). 211(July):123093. https://doi.org/10.1016/j.polymer.2020.12309310.1016/j.polymer.2020.123093 ↗
67. Laput O, Vasenina I (2019) Low-temperature plasma treatment of polylactic acid and PLA/HA composite material. J Mater Sci 54(17):11726–11738. https://doi.org/10.1007/s10853-019-03693-410.1007/s10853-019-03693-4 ↗
68. Durán IR, Vanslambrouck S, Chevallier P, Hoesli CA, Laroche G (2020) Atmospheric pressure cold plasma versus wet-chemical surface treatments for carboxyl functionalization of polylactic acid: a first step toward covalent immobilization of bioactive molecules. Colloids Surfaces B Biointerfaces 189(January):110847. https://doi.org/10.1016/j.colsurfb.2020.11084710.1016/j.colsurfb.2020.110847 ↗
69. Atmospheric C, Cap P, Nanomodified S, Polylactic P, Wang M, Favi P et al (2016) Cold atmospheric plasma (CAP) surface nanomodified 3D printed polylactic acid chair and professor of chemical engineering. Acta Biomater. https://doi.org/10.1016/j.actbio.2016.09.03010.1016/j.actbio.2016.09.030 ↗
70. Wan Y, Qu X, Lu J, Zhu C, Wan L, Yang J et al (2004) Characterization of surface property of poly(lactide-co-glycolide) after oxygen plasma treatment. Biomaterials 25(19):4777–478310.1016/j.biomaterials.2003.11.051 ↗
71. Czwartos J, Nowak-Stępniowska A, Budner B, Fok T, Bartnik A, Wachulak P et al (2024) Polycaprolactone scaffold surface modification with soft X-ray/extreme ultraviolet (SXR/EUV) radiation and low-temperature oxygen and nitrogen plasma for biomedical applications. J Mater Sci 59(26):11937–1195110.1007/s10853-024-09876-y ↗
72. Awsiuk K, Psarouli A, Petrou P, Budkowski A, Kakabakos S, Bernasik A et al (2011) Spectroscopic and microscopic examination of protein adsorption and blocking of non-specific binding to silicon surfaces modified with APTES and GOPS. Procedia Eng 25:334–33710.1016/j.proeng.2011.12.082 ↗
73. Hafeez H, Choi DK, Lee CM, Jesuraj PJ, Kim DH, Song A et al (2019) Replacement of n-type layers with a non-toxic APTES interfacial layer to improve the performance of amorphous Si thin-film solar cells. RSC Adv 9(13):7536–7542. https://doi.org/10.1039/C8RA07409G10.1039/C8RA07409G ↗
74. Patel K, Kumar R (2020) Vancomycin grafted polydopamine coated silver nanoparticles for enhanced antibacterial action against vancomycin-resistant bacteria E. faecalis. ChemistrySelect 5(15):4701–470710.1002/slct.202000200 ↗
75. Stepanova M, Averianov I, Gofman I, Shevchenko N, Rubinstein A, Egorova T et al (2023) Drug loaded 3D-printed poly("-caprolactone) scaffolds for local antibacterial or anti-inflammatory treatment in bone regeneration. Polymers (Basel) 15(3957)10.3390/polym15193957 ↗
76. Zheng K, Bortuzzo JA, Liu Y, Li W, Pischetsrieder M, Roether J et al (2015) Bio-templated bioactive glass particles with hierarchical macro–nano porous structure and drug delivery capability. Colloids Surf B Biointerfaces 135:825–832. https://doi.org/10.1016/j.colsurfb.2015.03.03810.1016/j.colsurfb.2015.03.038 ↗