journal article·2025-10Open access

Effects of trace-level compositional modifications on the high-temperature creep properties of additively manufactured Inconel 718

Theophil J. Oros, Michael E. Kassner, Andrea M. Hodge

Journal of Materials Science· Volume 60· Issue 39

Abstract

Abstract Additively manufactured (AM) alloys such as laser powder bed fusion (LPBF) Inconel 718 often exhibit inferior high-temperature mechanical performance compared to their conventionally manufactured (CM) counterparts, in part due to impurity embrittlement. While compositional tailoring has been employed in CM alloys to mitigate impurity effects, this strategy remains largely unexplored in AM materials. In this study, a modified LPBF IN718 was developed by adding trace amounts of Zr, Hf, Mg, and Ca, to address impurity-related degradation (such as sulfur embrittlement) and the performance gap between CM and AM Ni-based superalloys. Ambient tensile tests and high-temperature (650 °C, 704 °C) creep tests were conducted to evaluate the modified alloy relative to standard LPBF IN718. While the modified alloy showed a slight reduction in tensile strength, it demonstrated improved ductility at room temperature and enhanced creep strength, ductility, and rupture life at elevated temperatures. Microstructural analysis using SEM, EDS, EBSD, STEM, and NanoSIMS revealed key differences between the alloys. In the standard alloy, sulfur segregated at alumina particles within grains and at grain boundaries (GB). In contrast, alumina was not detected in the modified alloy, which exhibited a higher fraction of carbides, likely influenced by the trace additions and contributed to the improved mechanical performance. Additionally, the formation of sulfo-carbides and sulfides likely stabilized sulfur, reducing its GB segregation and enhancing GB cohesion, thereby improving creep behavior. Graphical abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–192810.1007/s11665-014-0958-z ↗
2. Yang Y, Jiang R, Han C, Chen J, Li H, Wang Y, Tang J, Zhou H, Hu W, Zheng B (2024) Frontiers in laser additive manufacturing technology. Addit Manuf Front. 200160. https://doi.org/10.1016/j.amf.2024.20016010.1016/j.amf.2024.200160 ↗
3. Caiazzo F, Alfieri V, Corrado G, Argenio P (2017) Laser powder-bed fusion of Inconel 718 to manufacture turbine blades. Int J Adv Manuf Technol 93:4023–403110.1007/s00170-017-0839-3 ↗
4. Wildgoose AJ, Thole KA, Tuneskog E, Wang L (2024) Roughness related to cooling performance of channels made through additive manufacturing. J Turbomach. 051008. https://doi.org/10.1115/1.406431010.1115/1.4064310 ↗
5. Paulonis DF, Schirra JJ (2001) Alloy 718 at Pratt & Whitney-Historical perspective and future challenges. Superalloys 718(625, 706):13–23
6. Schafrik RE, Ward DD, Groh JR (2001) Application of alloy 718 in GE aircraft engines: past, present and next five years. Superalloys 718(625):1–11
7. Gibson I, Rosen DW, Stucker B, Khorasani M, Rosen D, Stucker B, Khorasani M (2021) Additive manufacturing technologies. Springer10.1007/978-3-030-56127-7 ↗
8. Trosch T, Strößner J, Völkl R, Glatzel U (2016) Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting. Mater Lett 164:428–43110.1016/j.matlet.2015.10.136 ↗
9. Sanchez S, Gaspard G, Hyde C, Ashcroft I, Ravi G, Clare A (2021) The creep behaviour of nickel alloy 718 manufactured by laser powder bed fusion. Mater Des 204:10964710.1016/j.matdes.2021.109647 ↗
10. Pröbstle M, Neumeier S, Hopfenmüller J, Freund L, Niendorf T, Schwarze D, Göken M (2016) Superior creep strength of a nickel-based superalloy produced by selective laser melting. Mater Sci Eng A 674:299–30710.1016/j.msea.2016.07.061 ↗
11. Hosseini E, Popovich VA (2019) A review of mechanical properties of additively manufactured Inconel 718. Addit Manuf 30:100877
12. Kuo Y-L, Kamigaichi A, Kakehi K (2018) Characterization of Ni-based superalloy built by selective laser melting and electron beam melting. Metall Mater Trans A 49:3831–383710.1007/s11661-018-4769-y ↗
13. Oros TJ, Son K, Hodge AM, Kassner ME (2024) The high temperature creep and fracture behavior of Inconel 718 produced by additive manufacturing. Scr Mater 251:11620810.1016/j.scriptamat.2024.116208 ↗
14. Babamiri BB, Indeck J, Demeneghi G, Cuadra J, Hazeli K (2020) Quantification of porosity and microstructure and their effect on quasi-static and dynamic behavior of additively manufactured Inconel 718. Addit Manuf 34:101380
15. Kaletsch A, Qin S, Herzog S, Broeckmann C (2021) Influence of high initial porosity introduced by laser powder bed fusion on the fatigue strength of Inconel 718 after post-processing with hot isostatic pressing. Addit Manuf 47:102331
16. Kan WH, Chiu LNS, Lim CVS, Zhu Y, Tian Y, Jiang D, Huang A (2022) A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion. J Mater Sci 57(21):9818–986510.1007/s10853-022-06990-7 ↗
17. Zhou F, Hu X, Zhou Y, Xu Z, Guo C, Li G, Li Z, Huang Y, Zhu Q (2023) Effects of post-heat treatment on anisotropic mechanical properties of laser additively manufactured IN718. Mater Sci Eng A 877:14514410.1016/j.msea.2023.145144 ↗
18. Attallah MM, Jennings R, Wang X, Carter LN (2016) Additive manufacturing of Ni-based superalloys: the outstanding issues. MRS Bull 41(10):758–76410.1557/mrs.2016.211 ↗
19. Son K-T, Phan TQ, Levine LE, Kim K-S, Lee K-A, Ahlfors M, Kassner ME (2021) The creep and fracture properties of additively manufactured Inconel 625. Materialia 15:10102110.1016/j.mtla.2021.101021 ↗
20. Nagahari T, Nagoya T, Kakehi K, Sato N, Nakano S (2020) Microstructure and creep properties of Ni-base superalloy IN718 built up by selective laser melting in a vacuum environment. Metals 10(3):36210.3390/met10030362 ↗
21. Sun S-H, Hagihara K, Nakano T (2018) Effect of scanning strategy on texture formation in Ni-25 at.% Mo alloys fabricated by selective laser melting. Mater Des 140:307–31610.1016/j.matdes.2017.11.060 ↗
22. Liu F, Lin X, Huang C, Song M, Yang G, Chen J, Huang W (2011) The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718. J Alloys Compd 509(13):4505–450910.1016/j.jallcom.2010.11.176 ↗
23. Sanchez S, Hyde C, Ashcroft I, Ravi G, Clare A (2021) Multi-laser scan strategies for enhancing creep performance in LPBF. Addit Manuf 41:101948
24. Ravichander BB, Mamidi K, Rajendran V, Farhang B, Ganesh-Ram A, Hanumantha M, Moghaddam NS, Amerinatanzi A (2022) Experimental investigation of laser scan strategy on the microstructure and properties of Inconel 718 parts fabricated by laser powder bed fusion. Mater Charact 186:11176510.1016/j.matchar.2022.111765 ↗
25. F. Liljestrand (2019) Porosity closure during hot isostatic pressing of additively manufactured Ni-based superalloy IN718 produced by LPBF and EBM. MS Thesis, Chalmers University Of Technology
26. Liu F, Lin X, Song M, Zhao W, Chen J, Huang W (2011) Effect of intermediate heat treatment temperature on microstructure and notch sensitivity of laser solid formed Inconel 718 superalloy. J Wuhan Univ Technol-Mater Sci Ed 26(5):908–91310.1007/s11595-011-0335-9 ↗
27. Zhang H, Li C, Guo Q, Ma Z, Li H, Liu Y (2019) Improving creep resistance of nickel-based superalloy Inconel 718 by tailoring gamma double prime variants. Scr Mater 164:66–7010.1016/j.scriptamat.2019.01.041 ↗
28. Newell DJ, O’Hara RP, Cobb GR, Palazotto AN, Kirka MM, Burggraf LW, Hess JA (2019) Mitigation of scan strategy effects and material anisotropy through supersolvus annealing in LPBF IN718. Mater Sci Eng A 764:13823010.1016/j.msea.2019.138230 ↗
29. Jiang R, Mostafaei A, Pauza J, Kantzos C, Rollett AD (2019) Varied heat treatments and properties of laser powder bed printed Inconel 718. Mater Sci Eng A 755:170–18010.1016/j.msea.2019.03.103 ↗
30. Tajyar A, Brooks N, Holtham N, Rowe R, Newell DJ, Palazotto AN, Davami K (2022) Effects of a modified heat-treatment on microstructure and mechanical properties of additively manufactured Inconel 718. Mater Sci Eng A 838:14277010.1016/j.msea.2022.142770 ↗
31. Xu J, Ma T, Peng RL, Hosseini S (2021) Effect of post-processes on the microstructure and mechanical properties of laser powder bed fused IN718 superalloy. Addit Manuf 48:102416
32. Zhao J-R, Hung F-Y, Lui T-S (2020) Microstructure and tensile fracture behavior of three-stage heat treated Inconel 718 alloy produced via laser powder bed fusion process. J Mater Res Technol 9(3):3357–336710.1016/j.jmrt.2020.01.030 ↗
33. Banerjee K (2011) The role of magnesium in superalloys—a review. Mater Sci Appl 2(09):1243–1255
34. Guard RW (1952) Calcium and magnesium as steel deoxidizers. PhD Dissertation, Purdue University
35. Teimouri J, Hosseini SR, Farmanesh K (2018) Effect of magnesium and calcium addition on carbides characterizations and anisotropy ductile fracture of Inconel 718. Metallogr Microstruct Anal 7:268–27610.1007/s13632-018-0449-y ↗
36. Li L, Wu Y, Hou J, Gao S, Zhou L (2024) The effect of Hafnium on the microstructure and tensile property in a Ni-based superalloy. J Mater Res Technol 30:2977–298510.1016/j.jmrt.2024.04.049 ↗
37. Zhao H, Liu QB, Lee G, Yao DW (2017) The addition of Zr in nickel-based inconel 718 superalloy to prevent hot cracks propagation. Key Engineering Materials. Trans Tech Publ, pp 3–810.4028/www.scientific.net/KEM.727.3 ↗
38. Hosseini SA, Abbasi SM, Madar KZ (2018) The effect of boron and zirconium on microstructure and tensile properties of the wrought nickel-based superalloy ATI 718Plus. Mater Sci Eng A 712:780–78910.1016/j.msea.2017.12.038 ↗
39. Goodelman DC, Kassner ME, Hodge AM (2024) Magnetron sputtering as a microstructural screening tool for laser additive manufacturing: study on Ni superalloys. Adv Eng Mater 26(6):301585. https://doi.org/10.1002/adem.20230158510.1002/adem.202301585 ↗
40. Yong H, Yang X-K, Kang W-J, Ding Y-T, Xu J-Y, Zhang H-Y (2021) Effect of Zr content on crack formation and mechanical properties of IN738LC processed by selective laser melting. Trans Nonferrous Met Soc China 31(5):1350–136210.1016/S1003-6326(21)65582-6 ↗
41. Palleda TN, Banoth S, Tanaka M, Murakami H, Kakehi K (2023) The role of yttrium micro-alloying on microstructure evolution and high-temperature mechanical properties of additively manufactured Inconel 718. Mater Des 225:11156710.1016/j.matdes.2022.111567 ↗
42. Morscheiser J, Thönnessen L, Gehrmann B, Friedrich B, Recycling M (2011) The influence of the slag composition on the desulfurization of Ni-based superalloys. In: Proceedings of the 2011 international symposium on liquid metal processing and casting: Nancy, France, pp 89–96
43. Groden C, Traxel KD, Bandyopadhyay A (2024) Powder contamination during laser powder bed fusion: Inconel 718 in Ti6Al4V. Mater Lett 365:13646510.1016/j.matlet.2024.136465 ↗
44. Verma C, Alameri A, Barsoum I, Alfantazi A (2024) Review on corrosion-related aspects of metallic alloys additive manufactured with laser powder bed-fusion (LPBF) technology. Prog Addit Manuf 10(5):3195–3223. https://doi.org/10.1007/s40964-024-00810-x10.1007/s40964-024-00810-x ↗
45. Kennedy SK, Dalley AM, Kotyk GJ (2019) Additive manufacturing: assessing metal powder quality through characterizing feedstock and contaminants. J Mater Eng Perform 28:728–74010.1007/s11665-018-3841-5 ↗
46. Son KT, Kassner ME, Lee KA (2020) The creep behavior of additively manufactured Inconel 625. Adv Eng Mater 22(1):190054310.1002/adem.201900543 ↗
47. Shi G, Zhang R, Cao Y, Yang G (2024) A review of the vaporization behavior of some metal elements in the LPBF process. Micromachines 15(7):84610.3390/mi15070846 ↗
48. Kassner ME (2015) Fundamentals of creep in metals and alloys. Butterworth-Heinemann
49. Kuo C-M, Yang Y-T, Bor H-Y, Wei C-N, Tai C-C (2009) Aging effects on the microstructure and creep behavior of Inconel 718 superalloy. Mater Sci Eng A 510:289–29410.1016/j.msea.2008.04.097 ↗
50. Bryndza G, Tchuindjang JT, Chen F, Habraken AM, Sepúlveda H, Tuninetti V, Mertens A, Duchêne L (2025) Review of the microstructural impact on creep mechanisms and performance for laser powder bed fusion Inconel 718. Materials 18(2):27610.3390/ma18020276 ↗
51. Linga Murty K, Gollapudi S, Charit I (2010) Newtonian viscous creep in metals. Trans Indian Inst Met 63:85–9110.1007/s12666-010-0012-2 ↗
52. Wu S, Peng H, Gao X, Hodgson P, Song H, Zhu Y, Tian Y, Huang A (2022) Improving creep property of additively manufactured Inconel 718 through specifically-designed post heat treatments. Mater Sci Eng A 857:14404710.1016/j.msea.2022.144047 ↗
53. Kuo Y-L, Nagahari T, Kakehi K (2018) The effect of post-processes on the microstructure and creep properties of alloy718 built up by selective laser melting. Materials 11(6):99610.3390/ma11060996 ↗
54. Xu Z, Hyde C, Tuck C, Clare A (2018) Creep behaviour of inconel 718 processed by laser powder bed fusion. J Mater Process Technol 256:13–2410.1016/j.jmatprotec.2018.01.040 ↗
55. Li K, Ren Y, Xie G, He J, Chen Q, Zhang M, Zhang DZ, Cao H, Murr LE (2024) Effect of solid-solution treatment on high-temperature properties and creep fracture mechanism of laser powder bed fused Inconel 625 alloy. Mater Sci Eng A 902:14659210.1016/j.msea.2024.146592 ↗
56. Xu Y, He S, Zhu X, Chen Z, Guo S, Wang N (2024) Abnormal precipitation behavior of γ′′ phase at twin boundaries of LPBF Inconel 718 and its effect on mechanical properties. Mater Charact 215:11419510.1016/j.matchar.2024.114195 ↗
57. Tsai Y-L, Wang S-F, Bor H-Y, Hsu Y-F (2014) Effects of Zr addition on the microstructure and mechanical behavior of a fine-grained nickel-based superalloy at elevated temperatures. Mater Sci Eng A 607:294–30110.1016/j.msea.2014.03.136 ↗
58. Sanchez S, Gaspard G, Hyde C, Ashcroft I, Ravi G, Clare AT (2022) On the thermomechanical aging of LPBF alloy 718. Mater Sci Eng A 841:14299810.1016/j.msea.2022.142998 ↗
59. Pei C, Yuan H, Li B, Ma S (2022) Anisotropic damage evolution and modeling for a nickel-based superalloy built by additive manufacturing. Eng Fract Mech 268:10845010.1016/j.engfracmech.2022.108450 ↗
60. Rizwan M, Ullah R, Lu J, Wang J, Zhang Y, Zhang Z (2024) Insight into elongation and strength enhancement of heat-treated LPBF Ni-based superalloy 718 using in-situ SEM-EBSD. Mater Sci Eng A 914:14716310.1016/j.msea.2024.147163 ↗
61. Liu B, Ding Y, Xu J, Gao Y, Wang X, Zhang H, Hu Y, Sun F (2023) Outstanding strength-ductility synergy in Inconel 718 superalloy via laser powder bed fusion and thermomechanical treatment. Addit Manuf 67:103491
62. Livera E, Christofidou K, Miller J, Chechik L, Ryan D, Shrive J, Todd I (2024) Microstructural control of LPBF Inconel 718 through post processing of intentionally placed AM discontinuity distributions. Materialia 36:10216310.1016/j.mtla.2024.102163 ↗
63. Chaturvedi M, Han Y-F (1983) Strengthening mechanisms in Inconel 718 superalloy. Metal Sci 17(3):145–14910.1179/030634583790421032 ↗
64. Devaux A, Nazé L, Molins R, Pineau A, Organista A, Guédou J, Uginet J, Héritier P (2008) Gamma double prime precipitation kinetic in Alloy 718. Mater Sci Eng A 486(1–2):117–12210.1016/j.msea.2007.08.046 ↗
65. Deng H, Wang L, Liu Y, Song X, Meng F, Yu T (2023) Microstructure and tensile properties of IN718 superalloy aged with temperature/stress coupled field. J Mater Res Technol 23:4747–475610.1016/j.jmrt.2023.02.124 ↗
66. Ferreri NC, Vogel SC, Knezevic M (2020) Determining volume fractions of γ, γ′, γ″, δ, and MC-carbide phases in Inconel 718 as a function of its processing history using an advanced neutron diffraction procedure. Mater Sci Eng A 781:13922810.1016/j.msea.2020.139228 ↗
67. Aghajani A, Tewes J, Parsa AB, Hoffmann T, Kostka A, Kloewer J (2016) Identification of Mo-rich M 23 C 6 carbides in Alloy 718. Metall Mater Trans A 47:4382–439210.1007/s11661-016-3593-5 ↗
68. Li K, Liu J, Grovenor CR, Moore KL (2020) NanoSIMS imaging and analysis in materials science. Annu Rev Anal Chem 13:273–29210.1146/annurev-anchem-092019-032524 ↗
69. Gasper A, Szost B, Wang X, Johns D, Sharma S, Clare A, Ashcroft I (2018) Spatter and oxide formation in laser powder bed fusion of Inconel 718. Addit Manuf 24:446–456
70. Doremus RH (2008) Ceramic and glass materials: Structure, properties and processing. Springer, pp 1–2610.1007/978-0-387-73362-3_1 ↗
71. Theska F, Tse WF, Schulz B, Buerstmayr R, Street SR, Lison-Pick M, Primig S (2023) Review of microstructure–mechanical property relationships in cast and wrought Ni-based superalloys with boron, carbon, and zirconium microalloying additions. Adv Eng Mater 25(8):220151410.1002/adem.202201514 ↗
72. Dong J, Xie X, Thompson R (2000) The influence of sulfur on stress-rupture fracture in Inconel 718 superalloys. Metall Mater Trans A 31:2135–214410.1007/s11661-000-0131-1 ↗
73. Allart M, Christien F, Le Gall R, Nowakowski P, Grovenor C (2013) A multi-technique investigation of sulfur grain boundary segregation in nickel. Scr Mater 68(10):793–79610.1016/j.scriptamat.2013.01.028 ↗
74. Donachie MJ, Donachie SJ (2002) Superalloys: a technical guide. ASM International10.31399/asm.tb.stg2.9781627082679 ↗
75. Dean JA (1999) Lange's handbook of chemistry. McGraw-Hill, Inc
76. Wallace W, Holt R, Terada T (1973) The nature of the sulfo-carbides observed in nickel-base superalloys. Metallography 6(6):511–52610.1016/0026-0800(73)90048-7 ↗
77. Wj L, Jj J, Cw B (1990) Gibbs energies of formation of TiS and Ti4C2S2 in austenite. ISIJ Int 30(11):985–99010.2355/isijinternational.30.985 ↗
78. McLouth TD, Witkin DB, Lohser JR, Bean GE, Adams PM, Lingley ZR, Zaldivar RJ (2022) Influence of reduced carbon content on microstructure and mechanical behavior of Inconel 718 prepared by laser powder bed fusion. Addit Manuf Lett 3:10003710.1016/j.addlet.2022.100037 ↗
79. Johnson W, Doherty J, Kear B, Giamei A (1974) Confirmation of sulfur embrittlement in nickel alloys. Scr Metall 8(8):971–97410.1016/0036-9748(74)90394-9 ↗
80. Beckman J, Woodford D (1988) Intergranular sulfur attack in nickel and nickel-base alloys. Superalloys, TMS Warrendale, pp 795–80410.7449/1988/Superalloys_1988_795_804 ↗