Mechanical and oxidation resistance of remanufactured NiCoCrAlYTa coating deposited via arc ion plating
Source abstract
Abstract
NiCoCrAlYTa coating of the Ni-based superalloy substrate was processed using a feasible remanufacturing method. The coating was deposited using arc ion plating (AIP) and removed by a complex treatment of immersion-etching in hydrochloric acid solution and wet sandblasting. The conventional and remanufactured coatings were homogenized in vacuum at 1080 °C for 4 h and then oxidized isothermally in the air at 1050 °C for 200 h. The constituent phases and the microstructure were characterized using powder X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). Additionally, the mechanical performance of the coated specimens was evaluated via tensile testing at room temperature and stress rupture testing at 982 °C/220 MPa. The complex treatment is found to effectively remove the NiCoCrAlYTa coating without causing damage to the substrate. The re-coated specimens had a tensile yield strength greater than 985 MPa at room temperature, a rupture life of 45 h at 982/220 MPa, and an oxidation rate constant Kp of 3.16 × 10–12 g2cm−4 s−1 at 1050 °C, which were nearly identical to those of the conventionally coated specimens.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Goti R, Betaille-Francoual M, Hourcastagne E, Viguier B, Crabos F (2014) Isothermal oxidation behaviour of NiCoCrAlYTa coatings produced by HVOF spraying and tribomet (TM) process. Oxid Met 81(1–2):105–11310.1007/s11085-013-9422-y ↗
2. Toscano J, Gil A, Huttel T, Wessel E, Naumenko D, Singheiser L, Quadakkers WJ (2007) Temperature dependence of phase relationships in different types of MCrAlY-coatings. Surf Coat Technol 202(4–7):603–60710.1016/j.surfcoat.2007.06.044 ↗
3. Meng G-H, Liu H, Liu M-J, Xu T, Yang G-J, Li C-X, Li C-J (2019) Highly oxidation resistant MCrAlY bond coats prepared by heat treatment under low oxygen content. Surf Coat Technol 368:192–20110.1016/j.surfcoat.2019.04.046 ↗
4. Meng GH, Liu H, Liu MJ, Xu T, Yang GJ, Li CX, Li CJ (2020) Large-grain alpha-Al2O3 enabling ultra-high oxidation-resistant MCrAlY bond coats by surface pre-agglomeration treatment. Corros Sci 163:1310.1016/j.corsci.2019.108275 ↗
5. Alam MZ, Sarkar SB, Das DK (2018) Refurbishment of thermally degraded diffusion Pt-aluminide (PtAl) bond coat on a Ni-base superalloy. Surf Coat Technol 354:101–11110.1016/j.surfcoat.2018.09.023 ↗
6. Shipway PH, Bromley JPD, Weston DP (2007) Removal of coatings from polymer substrates by solid particle blasting to enhance reuse or recycling. Wear 263(1):309–31710.1016/j.wear.2006.11.032 ↗
7. Folkes J (2009) Waterjet—an innovative tool for manufacturing. J Mater Process Technol 209(20):6181–618910.1016/j.jmatprotec.2009.05.025 ↗
8. Kompella S, Moylan SP, Chandrasekar S (2001) Mechanical properties of thin surface layers affected by material removal processes. Surf Coat Technol 146–147:384–39010.1016/S0257-8972(01)01404-9 ↗
9. Teimourian H, Shabgard MR, Momber AW (2010) De-painting with high-speed water jets: paint removal process and substrate surface roughness. Prog Org Coat 69(4):455–46210.1016/j.porgcoat.2010.08.010 ↗
10. Yang X, Zhang J, Lu Z, Park HY, Jung YG, Park H, Koo DD, Sinatra R, Zhang J (2020) Removal and repair techniques for thermal barrier coatings: a review. Trans Inst Met Finish 98(3):121–12810.1080/00202967.2020.1750204 ↗
11. Bouchaud B, Creus J, Rebere C, Balmain J, Pedraza F (2008) Controlled stripping of aluminide coatings on nickel superalloys through electrolytic techniques. J Appl Electrochem 38(6):817–82510.1007/s10800-008-9516-4 ↗
12. Le Guevel Y, Grégoire B, Bouchaud B, Bilhé P, Pasquet A, Thiercelin M, Pedraza F (2016) Influence of the oxide scale features on the electrochemical descaling and stripping of aluminide coatings. Surf Coat Technol 292:1–1010.1016/j.surfcoat.2016.03.019 ↗
13. Song JX, Han YF, Li SS, Xiao CB (2005) Repair of NiCrAlYSi overlay coating on Ni3Al base alloy IC6. Intermetallics 13(3):351–35510.1016/j.intermet.2004.07.019 ↗
14. Wang J, Ji H, Chen M, Bao Z, Zhu S, Wang F (2020) High temperature oxidation and interdiffusion behavior of recoated NiCoCrAlY coating on a nickel-based superalloy. Corros Sci 175:10889410.1016/j.corsci.2020.108894 ↗
15. Lei Q, Hui P, Hongbo G, Shengkai G, Huibin X (2013) Inter-diffusion behavior of recoated CoCrAlY coating/ DZ125 directionally solidified superalloy. Acta Metall 49(02):229–23510.3724/SP.J.1037.2012.00532 ↗
16. Yang HZ, Zou JP, Shi Q, Dai MJ, Lin SS, Du W, Lv L (2019) Analysis of the microstructural evolution and interface diffusion behavior of NiCoCrAlYTa coating in high temperature oxidation. Corros Sci 153:162–16910.1016/j.corsci.2019.03.022 ↗
17. Yang H Z, Zou J P, Shi Q, Wang D, Dai M J, Lin S S, Chen X X, Wang W, Xia XP (2020) Comprehensive study on the microstructure evolution and oxidation resistance performance of NiCoCrAlYTa coating during isothermal oxidation at High temperature. Corrosion Sci, 175.10.1016/j.corsci.2020.108889 ↗
18. Harrington SP, Devine TM (2009) Relation between the semiconducting properties of a passive film and reduction reaction rates. J Electrochem Soc 156(4):C154–C15910.1149/1.3077576 ↗
19. Koura N, Nagase H, Sato A, Kumakura S, Takeuchi K, Ui K, Tsuda T, Loong CK (2008) Electroless plating of aluminum from a room-temperature ionic liquid electrolyte. J Electrochem Soc 155(2):D155–D15710.1149/1.2817880 ↗
20. Szabo S, Bakos I (2010) Reference electrodes in metal corrosion. Int J Corros, 756950 (756920 pp.)–756950 (756920 pp.).10.1155/2010/756950 ↗
21. Xiang M, Xu Z, Wu Q, Wang Y, Yan Z (2022) Selective electrooxidation of primary amines over a Ni/Co metal-organic framework derived electrode enabling effective hydrogen production in the membrane-free electrolyzer. J Power Sources 535:23146110.1016/j.jpowsour.2022.231461 ↗
22. Ding B, Ren W, Zhong Y, Yuan X, Zheng T, Shen Z, Guo Y, Li Q, Peng J, Brnic J, Gao Y, Liaw PK (2022) Revealing the influential mechanism of strain ranges on cyclic-life saturation during creep-fatigue in Nickel-based superalloy DZ445. Int J Plast 155:10332010.1016/j.ijplas.2022.103320 ↗
23. Tao XP, Wang XG, Zhou YZ, Tan KJ, Liang JJ, Yang YH, Liu JL, Liu JD, Li JG, Sun XF (2020) Effect of Pt-Al bond-coat on the tensile deformation and fracture behaviors of a second-generation SX Ni-based superalloy at elevated temperatures. Surf Coat Technol 389:1110.1016/j.surfcoat.2020.125640 ↗
24. Jackson GA, Sun W, Mccartney DG (2019) The influence of microstructure on the ductile to brittle transition and fracture behaviour of HVOF NiCoCrAlY coatings determined via small punch tensile testing. Mater Sci Eng-Struct Mater Properties Microstruct Process 754:479–49010.1016/j.msea.2019.03.108 ↗
25. Texier D, Monceau D, Crabos F, Andrieu E (2017) Tensile properties of a non-line-of-sight processed β-γ-γ′ MCrAlY coating at high temperature. Surf Coat Technol 326:28–3610.1016/j.surfcoat.2017.07.026 ↗
26. Wang H-Y, Zhu R-F, Lu Y-P, Xiao G-Y, He K, Yuan YF, Ma X-N, Li Y (2014) Effect of sandblasting intensity on microstructures and properties of pure titanium micro-arc oxidation coatings in an optimized composite technique. Appl Surf Sci 292:204–21210.1016/j.apsusc.2013.11.115 ↗
27. Li Z, Qian S, Wang W (2011) Influence of superalloy substrate roughness on adhesion and oxidation behavior of magnetron-sputtered NiCoCrAlY coatings. Appl Surf Sci 257(24):10414–1042010.1016/j.apsusc.2011.06.120 ↗
28. Bin Zaman S, Hazrati J, De Rooij M, Matthews D, Van Den Boogaard T (2021) Investigating AlSi coating fracture at high temperatures using acoustic emission sensors. Surf Coat Technol 423:13
29. Wang HW, Yang JX, Meng J, Ci SW, Yang YH, Sheng NC, Zhou YZ, Sun XF (2021) Effects of B content on microstructure and high-temperature stress rupture properties of a high chromium polycrystalline nickel-based superalloy. J Alloy Compd 860:1110.1016/j.jallcom.2020.157929 ↗
30. Parlikar C, Alam MZ, Chatterjee D, Das DK (2019) Oxidation and concomitant effects on the microstructure and high temperature tensile properties of a DS Ni-base superalloy applied with different thicknesses of Pt-aluminide (PtAl) bond coat. Surf Coat Technol 373:25–3710.1016/j.surfcoat.2019.05.060 ↗
31. Liu YD, Sun J, Li W, Gu WS, Pei ZL, Gong J, Sun C (2021) Microstructural evolution and mechanical properties of NiCrAlYSi plus NiAl/cBN abrasive coating coated superalloy during cyclic oxidation. J Mater Sci Technol 71:44–5410.1016/j.jmst.2020.08.043 ↗
32. Wang J, Chen M, Cheng Y, Yang L, Bao Z, Liu L, Zhu S, Wang F (2017) Hot corrosion of arc ion plating NiCrAlY and sputtered nanocrystalline coatings on a nickel-based single-crystal superalloy. Corros Sci 123:27–3910.1016/j.corsci.2017.04.004 ↗
33. Brandl W, Marginean G, Maghet D, Utu D (2004) Effects of specimen treatment and surface preparation on the isothermal oxidation behaviour of the HVOF-sprayed MCrA1Y coatings. Surf Coat Technol 188:20–2610.1016/j.surfcoat.2004.07.111 ↗
34. Brumm M W, Grabke HJ (1992) The oxidation behaviour of NiAl-I. Phase transformations in the alumina scale during oxidation of NiAl and NiAl-Cr alloys. Corrosion Sci 33(11):1677–1690.10.1016/0010-938X(92)90002-K ↗
35. Han YJ, Chen HF, Gao D, Yang G, Liu B, Chu YJ, Fan JK, Gao YF (2017) Microstructural Evolution of NiCoCrAlHfYSi and NiCoCrAlTaY Coatings Deposited by AC-HVAF and APS. J Therm Spray Technol 26(8):1758–177510.1007/s11666-017-0623-9 ↗
36. Puetz P, Huang X, Yang Q, Tang Z (2011) Transient oxide formation on APS NiCrAlY after oxidation heat treatment. J Therm Spray Technol 20(3):621–62910.1007/s11666-010-9602-0 ↗
37. Zhu C, Li P, Wu XY (2016) A study of the diffusion and pre-oxidation treatment on the formation of Al2O3 ceramic scale on NiCrAlY bond-coat during initial oxidation process. Ceram Int 42(6):7708–771610.1016/j.ceramint.2016.01.185 ↗
38. Cao F, Tryon B, Torbet CJ, Pollock TM (2009) Microstructural evolution and failure characteristics of a NiCoCrAlY bond coat in “hot spot” cyclic oxidation. Acta Mater 57(13):3885–389410.1016/j.actamat.2009.04.039 ↗
39. Rahman A, Jayaganthan R, Prakash S, Chawla V, Chandra R (2011) Cyclic high temperature oxidation behaviour of sputtered Cr/Al multilayer coatings on superalloy. Surf Eng 27(5):393–40110.1179/026708408X339064 ↗
40. Audigié P, Rouaix-Vande Put A, Malié A, Bilhé P, Hamadi S, Monceau D (2014) Observation and modeling of α-NiPtAl and Kirkendall void formations during interdiffusion of a Pt coating with a γ-(Ni-13Al) alloy at high temperature. Surf Coat Technol 260:9–1610.1016/j.surfcoat.2014.08.083 ↗
41. Zhou Y, Zhao X, Zhao C, Hao W, Wang X, Xiao P (2017) The oxidation performance for Zr-doped nickel aluminide coating by composite electrodepositing and pack cementation. Corros Sci 123:103–11510.1016/j.corsci.2017.04.008 ↗
42. Tolpygo VK, Clarke DR (2000) Microstructural study of the theta-alpha transformation in alumina scales formed on nickel-aluminides. Mater High Temp 17(1):59–7010.1179/mht.2000.011 ↗
43. Peng X, Clarke DR, Wang F (2003) Transient-alumina transformations during the oxidation of magnetron-sputtered CoCrAl nanocrystalline coatings. Oxid Met 60(3–4):225–24010.1023/A:1026015101783 ↗
44. Huang Y, Peng X, Chen X-Q (2021) The mechanism of θ- to α-Al2O3 phase transformation. J Alloy Compd 863:15866610.1016/j.jallcom.2021.158666 ↗
45. Poza P, Gómez-García J, Múnez CJ (2012) TEM analysis of the microstructure of thermal barrier coatings after isothermal oxidation. Acta Mater 60(20):7197–720610.1016/j.actamat.2012.09.028 ↗
46. Liu YZ, Zheng SJ, Zhu YL, Wei H, Ma XL (2016) Microstructural evolution at interfaces of thermal barrier coatings during isothermal oxidation. J Eur Ceram Soc 36(7):1765–177410.1016/j.jeurceramsoc.2016.02.011 ↗
47. Mahesh RA, Jayaganthan R, Prakash S (2011) High temperature oxidation studies on HVOF sprayed NiCrAl coatings on superalloys. Surf Eng 27(5):332–33910.1179/174329409X409486 ↗
48. Wang F, Geng S (2003) High temperature oxidation and corrosion resistant nanocrystalline coatings. Surf Eng 19(1):32–3610.1179/026708402225010056 ↗
49. Tolpygo VK, Clarke DR (1999) Alumina scale failure resulting from stress relaxation. Surf Coat Technol 120–121:1–710.1016/S0257-8972(99)00331-X ↗
50. Liu P, Jiang P, Sun Y, Xu R, Wang T, Zhang W (2021) Numerical Analysis of stress evolution in thermal barrier coating system during two-stage growth of heterogeneous oxide. Ceramics Int 47(10, Part A):14311–14319.10.1016/j.ceramint.2021.01.292 ↗