Hot deformation behavior of Fe-25Mn-12Al-1C-3.5Ni low-density steel: constitutive analysis and processing maps
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Zhang R, Zheng W, Veys X, Huyberechts G, Springer H, Selleby M (2018) Prediction of martensite start temperature for lightweight Fe-Mn-Al-C steels. J Phase Equilib Diffus 39:476–48910.1007/s11669-018-0660-1 ↗
2. Wang D, Zuo Y, Sun L, Wang F, Xu J, Zhao Y, Fu Y, Peng H (2025) Effects of Al contents on aging hardening behaviors of Fe-Mn-Al-Cu low-density steels with ultra-high specific hardness. Mater Charact 221:11476110.1016/j.matchar.2025.114761 ↗
3. Moon J, Park SJ, Jang JH, Lee TH, Lee CH, Hong HU, Han HN, Lee J, Lee BH, Lee C (2018) Investigations of the microstructure evolution and tensile deformation behavior of austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition. Acta Mater 147:226–23510.1016/j.actamat.2018.01.051 ↗
4. Wang Z, Lu W, An F, Song M, Ponge D, Raabe D, Li Z (2022) High stress twinning in a compositionally complex steel of very high stacking fault energy. Nat Commun 13:1–8
5. Chen Y, Ma S, Ju J, Chen K, Wang J, Shen Z, Zeng X (2025) Phase transformation-mediated high-temperature oxidation in an AlCrFeCoNi2.1 EHEA alloy at elevated temperature. Corros Sci 245:11267410.1016/j.corsci.2025.112674 ↗
6. Dong K, Sun L, Zhang Z, Li Z, Li J, Liu L, Du K, Zhang Y (2023) Effects of V addition on microstructure and pseudoelastic response in Fe–Mn–Al–Ni alloys. Intermetallics 160:10795410.1016/j.intermet.2023.107954 ↗
7. Drouven C, Song W, Bleck W (2018) Phase-specific precipitation of intermetallic phases in Fe Al Mn Ni C duplex steels. Steel Res Int 90:180044010.1002/srin.201800440 ↗
8. Tuan YH, Wang CS, Tsai CY, Chao CG, Liu TF (2009) Corrosion behaviors of austenitic Fe–30Mn–7Al–xCr–1C alloys in 3.5% NaCl solution. Mater Chem Phys 114:595–59810.1016/j.matchemphys.2008.10.009 ↗
9. Zhang J, Liu Y, Hu C, Jiang Y, Addad A, Ji G, Song C, Zhai Q (2022) The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: a multiscale investigation. Mater Charact 186:11180110.1016/j.matchar.2022.111801 ↗
10. Jiang Z, Wang Y, Wang M, Ma S, Shen Z, Zeng X (2025) Mutual FCC-BCC phase transition driving surface homogenization in a novel core-shell medium-entropy alloy after exposure to supercritical water. Corros Sci 252:11297110.1016/j.corsci.2025.112971 ↗
11. Jia X, Gao G, Gui X, Feng C, Misra RDK, Bai B (2024) Uncovering microstructure-property relationship in Ni-alloyed Fe–Mn–Al–C low-density steel treated by hot-rolling and air-cooling process. Acta Metall Sin (Engl Lett) 37:713–72510.1007/s40195-024-01666-4 ↗
12. Zargaran A, Trang TTT, Park G, Kim NJ (2021) Κ-carbide assisted nucleation of B2: a novel pathway to develop high specific strength steels. Acta Mater 220:11734910.1016/j.actamat.2021.117349 ↗
13. Rawat P, Prakash U, Satya Prasad VV (2022) Studies on hot deformation behavior and dynamic recrystallization in a high Al ferritic low-density steel. J Mater Eng Perform 32:4541–455410.1007/s11665-022-07428-6 ↗
14. Chai RX, Zhang CW, Guo W, Zhang F (2017) Hot deformation behavior and processing map of 40MnBH alloy steel. Steel Res Int 88:160028110.1002/srin.201600281 ↗
15. Wang D, Liu J, Teng Y, Guo J, Zhang D (2024) Hot deformation behavior and processing map of Cr–Mn–Ni–Mo–N austenitic stainless steels. Steel Res Int 95:240029610.1002/srin.202400296 ↗
16. Liu PT, Huang QX, Ma LF, Wang T (2018) Characterization of hot deformation behavior of wear-resistant steel BTW1 using processing maps and constitutive equations. J Iron Steel Res Int 25:1054–106110.1007/s42243-018-0154-8 ↗
17. Wang F, Song M, Elkot MN, Yao N, Sun B, Song M, Wang Z, Raabe D (2024) Shearing brittle intermetallics enhances cryogenic strength and ductility of steels. Science 384:1017–102210.1126/science.ado2919 ↗
18. Zhang B, Dong Y, Misra DKR, Liu Y, Sun C, Du LX (2020) High-temperature deformation behavior of a novel hot-rolled transformation-induced plasticity alloy: experiments, constitutive modeling, and processing maps. Steel Res Int 92:200033810.1002/srin.202000338 ↗
19. Abedi HR, Zarei Hanzaki A, Liu Z, Xin R, Haghdadi N, Hodgson PD (2017) Continuous dynamic recrystallization in low density steel. Mater Des 114:55–6410.1016/j.matdes.2016.10.044 ↗
20. Mola J, Scherbring S, Lienert U, Zargaran A, Biermann H, Sahu P (2025) Size-dependent stress response of nanoscale B2 intermetallic precipitates revealed by in-situ high-energy X-ray diffraction. Acta Mater 291:12096710.1016/j.actamat.2025.120967 ↗
21. Duprez L, De Cooman BC, Akdut N (2002) Flow stress and ductility of duplex stainless steel during high-temperature torsion deformation. Metall Mater Trans A 33(7):1931–193810.1007/s11661-002-0026-4 ↗
22. Yang MX, Yuan FP, Xie QG, Wang YD, Ma E, Wu XL (2016) Strain hardening in Fe–16Mn–10Al–0.86C–5Ni high specific strength steel. Acta Mater 109:213–22210.1016/j.actamat.2016.02.044 ↗
23. Mozumder YH, Arun Babu K, Saha R, Mandal S (2018) Flow characteristics and hot workability studies of a Ni-containing Fe-Mn-Al-C lightweight duplex steel. Mater Charact 146:1–1410.1016/j.matchar.2018.09.036 ↗
24. Gao D, Shen Z, Chen K, Zhou X, Liu H, Wang J, Li Y, Liu Z, Deng H, Wang WY (2025) Review of progress in calculation and simulation of high-temperature oxidation. Prog Mater Sci 147:10134810.1016/j.pmatsci.2024.101348 ↗
25. Wang Z, Fu W, Sun S, Li H, Lv Z, Zhao D (2010) Mechanical behavior and microstructural change of a high nitrogen CrMn austenitic stainless steel during hot deformation. Metall Mater Trans A 41:1025–103210.1007/s11661-009-0153-2 ↗
26. Xu X, Zhang P, Fang J, Wen L, Yang Y, Zhao Y, Chen L (2024) The hot deformation behavior and processing map analysis of a high-nitrogen austenitic stainless steel. J Mater Res Technol 33:1359–136510.1016/j.jmrt.2024.09.162 ↗
27. Chen L, Ma X, Liu X, Wang L (2011) Processing map for hot working characteristics of a wrought 2205 duplex stainless steel. Mater Des 32:1292–129710.1016/j.matdes.2010.09.030 ↗
28. Zambrano OA, Valdés J, Aguilar Y, Coronado JJ, Rodríguez SA, Logé RE (2017) Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation. Mater Sci Eng A 689:269–28510.1016/j.msea.2017.02.060 ↗
29. Gurgel MAM, Leite DNF, Moreira LP, Paula ADS, Júnior EDSB, Teixeira RDS, Brandao LP (2024) Flow stress behavior, constitutive modeling, processing map and microstructure evolution in hot deformation of Fe-7.1Al-0.7Mn-0.4C-0.3Nb alloy. J Mater Res Technol 30:7145–715910.1016/j.jmrt.2024.05.063 ↗
30. Wu Z, Deng W, Luo J, Deng D (2019) Multifunctional nano-cellulose composite films with grape seed extracts and immobilized silver nanoparticles. Carbohydr Polym 205:447–45510.1016/j.carbpol.2018.10.060 ↗
31. Li S, Tong Z, Cheng S, Shen Z, Sun L, Gong A, Long B, Qin B, Wang Y, Lu S (2025) Resistance to embrittlement in ferritic/martensitic steel with TaWVCr coating in oxygen-saturated lead-bismuth eutectic at 350 °C. Surf Coat Technol 497:13172910.1016/j.surfcoat.2025.131729 ↗
32. Mirzadeh H, Cabrera JM, Najafizadeh A (2011) Constitutive relationships for hot deformation of austenite. Acta Mater 59:6441–644810.1016/j.actamat.2011.07.008 ↗
33. Wang WT, Guo XZ, Huang B, Tao J, Li HG, Pei WJ (2014) The flow behaviors of CLAM steel at high temperature. Mater Sci Eng A 599:134–14010.1016/j.msea.2014.01.038 ↗
34. Zhang Z, Zhou H, Liu X, Li S, Dong J, Si G, Zhang B, Yue S (2013) Hot deformation behavior and processing maps for coiled tubing steel. Mater Sci Eng A 565:213–21810.1016/j.msea.2012.12.050 ↗
35. Fang YL, Liu ZY, Song HM, Jiang LZ (2009) Hot deformation behavior of a new austenite–ferrite duplex stainless steel containing high content of nitrogen. Mater Sci Eng A 526:128–13310.1016/j.msea.2009.07.012 ↗
36. Venugopal S, Sivaprasad PV (2003) A journey with Prasad’s processing maps. J mater eng perform 12(6):674–68610.1361/105994903322692475 ↗
37. Zhang W, Sun S, Zhao D, Wang B, Wang Z, Fu W (2011) Hot deformation behavior of a Nb-containing 316LN stainless steel. Mater Des 32:4173–417910.1016/j.matdes.2011.04.043 ↗
38. Hu J, Li X, Meng Q, Wang L, Li Y, Xu W (2022) Tailoring retained austenite and mechanical property improvement in Al–Si–V containing medium Mn steel via direct intercritical rolling. Mater Sci Eng A 855:14390410.1016/j.msea.2022.143904 ↗
39. Liu D, Ding H, Han D, Cai M (2023) Effect of grain interior and grain boundary κ-carbides on the strain hardening behavior of medium-Mn lightweight steels. Mater Sci Eng, A 871:14486110.1016/j.msea.2023.144861 ↗
40. Jia X, Gao G, Jiang S, Misra RDK, Gui X, Feng C (2025) Unveiling hot deformation behavior and microstructural evolution in Fe-21Mn-10Al-(5Ni)-C alloys. J Alloys Compd 1012:17849310.1016/j.jallcom.2025.178493 ↗
41. Wang J, Li M, Li Q, Pan X, Wang Z, Jia J, Liu R, Zhou Y, Ma L, Yu T (2024) A visualized microstructure evolution model integrating an analytical cutting model with a cellular automaton method during NiTi smart alloy machining. Crystals 14:67210.3390/cryst14080672 ↗
42. Schulz B, Haghdadi N, Leitner T, Hafok M, Primig S (2023) Dynamic recrystallisation via nucleation at distorted twins in a Ni-based superalloy. J Alloys Compd 936:16831810.1016/j.jallcom.2022.168318 ↗
43. Xu W, Xin YC, Zhang B, Li XY (2022) Stress corrosion cracking resistant nanostructured Al-Mg alloy with low angle grain boundaries. Acta Mater 225:11760710.1016/j.actamat.2021.117607 ↗
44. Zhou Y, Liu J, Ferreirós PA, Shang X, Chen K, Que Z, Shen Z, Yu J, Zhang L (2025) Integrated effects of non-equilibrium microstructures on stress corrosion cracking susceptibility of post-treated laser powder-bed-fusion 316L stainless steels. Corros Sci 252:11297410.1016/j.corsci.2025.112974 ↗
45. Zhou Y, Chen K, Ferreirós PA, Gao D, Song M, Shen Z, Que Z, Yu J, Zhang L, Zeng X (2025) Printed cellular structure enhancing re-passivation of stress corrosion cracking in high-temperature water. Corros Sci 244:11263610.1016/j.corsci.2024.112636 ↗
46. Hu J, Zhang JM, Sun GS, Du LX, Liu Y, Dong Y, Misra RDK (2019) High strength and ductility combination in nano-/ultrafine-grained medium-Mn steel by tuning the stability of reverted austenite involving intercritical annealing. J Mater Sci 54:6565–657810.1007/s10853-018-03291-w ↗
47. Hu J, Du LX, Xu W, Zhai JH, Dong Y, Liu YJ, Misra RDK (2017) Ensuring combination of strength, ductility and toughness in medium-manganese steel through optimization of nano-scale metastable austenite. Mater Charact 136:20–2810.1016/j.matchar.2017.11.058 ↗
48. Niu MC, Qiu S, Yu Q, Li W, Zhang SZ, Guo JM, Luan JH, Wang W, Yang T, Wang XL (2025) Achieving excellent elevated-temperature mechanical properties in dual-phase high-entropy alloys via nanoscale co-precipitation and heterostructure engineering. Acta Mater 284:12063410.1016/j.actamat.2024.120634 ↗