Composite lubricating layer with enhanced wear-resistant properties between HXLPE and Cu/ZrO2 ceramic friction interface
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Polymer Surface Interaction Studies · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Sawano H, Warisawa S, Ishihara S (2009) Study on long life of artificial joints by investigating optimal sliding surface geometry for improvement in wear resistance. Precis Eng 33:492–498. https://doi.org/10.1016/j.precisioneng.2009.01.00510.1016/j.precisioneng.2009.01.005 ↗
2. Charnley J (1972) The long-term results of low-friction arthroplasty of the hip performed as a primary intervention. J Bone Joint Surg Br 54:61–76. https://doi.org/10.1007/978-1-4471-5451-8_1710.1007/978-1-4471-5451-8_17 ↗
3. Dorr LD, Glousman R, Hoy ALS et al (1986) Treatment of femoral neck fractures with total hip replacement versus cemented and non-cemented hemiarthroplasty. J Arthroplasty 1:21–28. https://doi.org/10.1016/S0883-5403(86)80006-710.1016/S0883-5403(86)80006-7 ↗
4. Rorabeck CH, Bourne RB, Laupacis A et al (1994) A double-blind study of 250 cases comparing cemented with cementless total hip arthroplasty. Cost-effectiveness and its impact on health-related quality of life. Clin Orthop Relat Res 298:156–164. https://doi.org/10.1097/00003086-199401000-0002110.1097/00003086-199401000-00021 ↗
5. Tidermark J, Ponzer S, Svensson O et al (2003) Internal fixation compared with total hip replacement for displaced femoral neck fractures in the elderly. J Bone Joint Surg Br 86:380–388. https://doi.org/10.2106/JBJS.K.0024410.2106/JBJS.K.00244 ↗
6. Atkins GJ, Haynes DR, Howie DW et al (2011) Role of polyethylene particles in periprosthetic osteolysis: a review. World J Orthop 10:93–101. https://doi.org/10.2106/JBJS.K.0024410.2106/JBJS.K.00244 ↗
7. Gallo J, Goodman SB, Konttinen YT et al (2013) Particle disease: biologic mechanisms of periprosthetic osteolysis in total hip arthroplasty. Innate Immun 2:213–224. https://doi.org/10.1177/175342591245177910.1177/1753425912451779 ↗
8. Zhang XG, Zhang YL, Jin ZM (2022) A review of the bio-tribology of medical devices. Friction 10:4–30. https://doi.org/10.1007/s40544-021-0512-610.1007/s40544-021-0512-6 ↗
9. Fang ZH, Tu QZ, Shen XM et al (2022) Biomimetic surface modification of UHMWPE fibers to enhance interfacial adhesion with rubber matrix via constructing polydopamine functionalization platform and then depositing zinc oxide nanoparticles. Surf Interfaces 29:101728. https://doi.org/10.1016/j.surfin.2022.10172810.1016/j.surfin.2022.101728 ↗
10. Xie D, Liu HJ, Deng XR, Leng YX et al (2009) Deposition of a-C: H films on UHMWPE substrate and its wear-resistance. Appl Surf Sci 256:284–288. https://doi.org/10.1016/j.apsusc.2009.08.01710.1016/j.apsusc.2009.08.017 ↗
11. Fernandez-Pradas JM, Naranjo-Leon S, Morenza JL et al (2012) Surface modification of UHMWPE with infrared femtosecond laser. Appl Surf Sci 258:9256–9259. https://doi.org/10.1016/j.apsusc.2011.09.10610.1016/j.apsusc.2011.09.106 ↗
12. Kang XQ, Zong XH, Zhang P et al (2021) Effects of epigallocatechin gallate incorporation in UHMWPE on biological behavior, oxidative degradation, mechanical and tribological performance for biomedical applications. Tribol Int 158:106887. https://doi.org/10.1016/j.triboint.2021.10688710.1016/j.triboint.2021.106887 ↗
13. Hussain O, Ahmad B, Saleem S (2021) Tribological performance of biomedical grade UHMWPE/nanoAl2O3/vitamin-C hybrid composite for cartilage replacements. Mater Lett 291:129515. https://doi.org/10.1016/j.matlet.2021.12951510.1016/j.matlet.2021.129515 ↗
14. Ren Y, Wang FY, Lan RT, Fu WQ et al (2021) Polyphenol-assisted chemical crosslinking: a new strategy to achieve highly crosslinked, antioxidative, and antibacterial ultrahigh-molecular-weight polyethylene for total joint replacement. ACS Biomater Sci Eng 7:373–381. https://doi.org/10.1021/acsbiomaterials.0c0143710.1021/acsbiomaterials.0c01437 ↗
15. Ma SH, Zhang XQ, Yu B et al (2019) Brushing up functional materials. NPG Asia Mater 11:24. https://doi.org/10.1038/s41427-019-0121-210.1038/s41427-019-0121-2 ↗
16. Rong MM, Liu H, Scaraggi M et al (2020) High lubricity meets load capacity: cartilage mimicking bilayer structure by brushing up stiff hydrogels from subsurface. Adv Funct Mater 30:2004062. https://doi.org/10.1002/adfm.20200406210.1002/adfm.202004062 ↗
17. Yamamoto K, Tateiwa T, Takahashi Y (2017) Vitamin E-stabilized highly crosslinked polyethylenes: the role and effectiveness in total hip arthroplasty. J Orthop Sci 22:384–390. https://doi.org/10.1016/j.jos.2017.01.01210.1016/j.jos.2017.01.012 ↗
18. Tairy O, Kampf N, Driver MJ et al (2015) Dense, highly hydrated polymer brushes via modified atom-transfer-radical-polymerization: structure, surface interactions, and frictional dissipation. Macromolecules 48:140–151. https://doi.org/10.1021/ma501943910.1021/ma5019439 ↗
19. Chen M, Briscoe WH, Armes SP et al (2009) Lubrication at physiological pressures by polyzwitterionic brushes. Science 323:1698–1701. https://doi.org/10.1126/science.116939910.1126/science.1169399 ↗
20. Zhang ZY, Morse AJ, Armes SP et al (2011) Effect of brush thickness and solvent composition on the friction force response of poly(2-(methacryloyloxy) ethylphosphorylcholine) brushes. Langmuir 27:2514–2521. https://doi.org/10.1021/la104384810.1021/la1043848 ↗
21. Zhang ZY, Moxey M, Alswieleh A et al (2016) Effect of salt on phosphorylcholine-based zwitterionic polymer brushes. Langmuir 32:5048–5057. https://doi.org/10.1021/acs.langmuir.6b0076310.1021/acs.langmuir.6b00763 ↗
22. Ishihara K (2015) Highly lubricated polymer interfaces for advanced artificial hip joints through biomimetic design. Polym J 47:585–597. https://doi.org/10.1038/pj.2015.4510.1038/pj.2015.45 ↗
23. Kyomoto M, Moro T, Miyaji F et al (2010) Effect of 2-methacryloyloxyethyl phosphorylcholine concentration on photo-induced graft polymerization of polyethylene in reducing the wear of orthopaedic bearing surface. J Biomed Mater Res A 86:439–447. https://doi.org/10.1002/jbm.a.3151110.1002/jbm.a.31511 ↗
24. Yamane S, Kyomoto M, Moro T et al (2016) Effects of extra irradiation on surface and bulk properties of PMPC-grafted crosslinked polyethylene. J Biomed Mater Res A 104:37–47. https://doi.org/10.1002/jbm.a.3151110.1002/jbm.a.31511 ↗
25. Nakano H, Noguchi Y, Kakinoki S et al (2020) Highly durable lubricity of photo-cross-linked zwitterionic polymer brushes supported by poly(ether ether ketone) substrate. ACS Appl Bio Mater 3:1071–1078. https://doi.org/10.1021/acsabm.9b0104010.1021/acsabm.9b01040 ↗
26. Kyomoto M, Moro T, Takatori Y et al (2010) Self-initiated surface grafting with poly(2-methacryloyloxyethyl phosphorylcholine) on poly(ether-ether-ketone). Biomaterials 31:1017–1024. https://doi.org/10.1016/j.biomaterials.2009.10.05510.1016/j.biomaterials.2009.10.055 ↗
27. Yang B, Duan XB, Huang JJ (2015) Ultrathin, biomimetic, super hydrophilic layers of cross-linked poly(phosphobetaine) on polyethylene by photografting. Langmuir 31:1120–1126. https://doi.org/10.1021/la503113710.1021/la5031137 ↗
28. Ghosha S, Abanteriba S, Wong S et al (2019) Performance analysis of grafted poly (2-methacryloyloxyethylphosphorylcholine) on additively manufactured titanium substrate for hip implant applications. J Mech Behav Biomed Mater 100:103412. https://doi.org/10.1016/j.jmbbm.2019.10341210.1016/j.jmbbm.2019.103412 ↗
29. Feng SF, Liu YH, Li JJ et al (2021) Superlubricity achieved with zwitterionic brushes in diverse conditions induced by shear actions. Macromolecules 54:5719–5727. https://doi.org/10.1021/acs.macromol.1c0043010.1021/acs.macromol.1c00430 ↗
30. Wang K, Xiong DS, Niu YX (2014) Novel lubricated surface of titanium alloy based on porous structure and hydrophilic polymer brushes. Appl Surf Sci 317:875–883. https://doi.org/10.1016/j.apsusc.2014.09.01410.1016/j.apsusc.2014.09.014 ↗
31. Tone S, Hasegawa M, Puppulin L et al (2018) Surface modifications and oxidative degradation in MPC-grafted highly cross-linked polyethylene liners retrieved from short-term total hip arthroplasty. Acta Biomater 66:157–165. https://doi.org/10.1016/j.actbio.2017.11.01210.1016/j.actbio.2017.11.012 ↗
32. Yue QY, Lei LL, Gu Y et al (2022) Bioinspired polysaccharide-derived Zwitterionic brush-like copolymer as an injectable biolubricant for arthritis treatment. Adv Healthcare Mater 11:2200090. https://doi.org/10.1002/adhm.20220009010.1002/adhm.202200090 ↗
33. Yang RH, Li G, Zhuang CY et al (2021) Gradient bimetallic ion–based hydrogels for tissue microstructure reconstruction of tendon-to-bone insertion. Sci Adv 7:eabg3816. https://doi.org/10.1126/sciadv.abg381610.1126/sciadv.abg3816 ↗
34. Bedard K, Krause KH (2007) The NOX family of ROS-generating NADPH oxidases: physiology and pathophy-siology. Physiol Rev 87:245–313. https://doi.org/10.1152/physrev.00044.200510.1152/physrev.00044.2005 ↗
35. Nyholm N, Espallargas N (2023) Functionalized carbon nanostructures as lubricant additives—a review. Carbon 201:1200–1228. https://doi.org/10.1016/j.carbon.2022.10.03510.1016/j.carbon.2022.10.035 ↗
36. Su YH, Jing PP, Li YX et al (2023) Influence of Cu doping on the biocompatibility of zirconia-toughened alumina ceramics for artificial joints. Ceram Int 49:4109–4118. https://doi.org/10.1016/j.ceramint.2022.09.29110.1016/j.ceramint.2022.09.291 ↗
37. Li YX, Jing PP, Guo J et al (2023) Mechanical properties and wear behaviors of Cu-doped zirconia-toughened alumina ceramics. Ceram Int 49:14346–14354. https://doi.org/10.1016/j.ceramint.2023.01.02310.1016/j.ceramint.2023.01.023 ↗
38. Xiong DS, Deng YL, Wang N et al (2014) Influence of surface PMPC brushes on tribological and biocompatibility properties of UHMWPE. Appl Surf Sci 298:56–61. https://doi.org/10.1016/j.apsusc.2014.01.08810.1016/j.apsusc.2014.01.088 ↗
39. Liu SS, Deng YX, Sun H et al (2022) Composite lubricating films with silane coupling agent-modifed carbon nanotubes on a silicon substrate with enhanced wear-resistant properties. Tribol Lett 70:111. https://doi.org/10.1007/s11249-022-01650-y10.1007/s11249-022-01650-y ↗