Incremental forming of friction stir welded three-layered AA6061/DP980 steel/AA6061 tailored blanks considering effective parameters on both processes
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Shu Y-Q, Xiang N, Wang P-y, Huang T, Wang Y-l, Wang N-N, Shan C-W (2023) Evolution of in-plane stresses induced fracture behaviors of tailor welded blanks subjected to non-uniformly distributed load. Eng Fail Anal 153:107546. https://doi.org/10.1016/j.engfailanal.2023.10754610.1016/j.engfailanal.2023.107546 ↗
2. Kalinenko A, Zuiko I, Malopheyev S, Mironov S, Kaibyshev R (2024) Dissimilar friction-stir welding of aluminum alloys 2519, 6061, and 7050 using an additively-manufactured tool. Eng Fail Anal 156:1350–6307. https://doi.org/10.1016/j.engfailanal.2023.10785110.1016/j.engfailanal.2023.107851 ↗
3. Yang C, Chen G, Qiao J, Chuansong Wu, Zhou M, Zhang G, Shi Q (2024) Material flow during dissimilar friction stir welding of Al/Mg alloys. Int J Mech Sci 272:0020–7403. https://doi.org/10.1016/j.ijmecsci.2024.10917310.1016/j.ijmecsci.2024.109173 ↗
4. Lakshmi AA, Kumar BS, Kumar MN et al (2024) Hot forming behaviour of tailor welded aluminum (AA6061- AA8011) alloy sheets using friction stir welding. Int J Interact Des Manuf 18:2583–2595. https://doi.org/10.1007/s12008-022-00946-610.1007/s12008-022-00946-6 ↗
5. Sharma M, Bhattacharya A, Paul SK (2024) Influence of single point incremental forming on the low-cycle fatigue performance of AA6061-T6. Int J Fatigue 178:0142–1123. https://doi.org/10.1016/j.ijfatigue.2023.10799410.1016/j.ijfatigue.2023.107994 ↗
6. Moayedi H, Darabi R, Ghabussi A, Habibi M, Foong LK (2020) Weld orientation effects on the formability of tailor welded thin steel sheets. Thin-Walled Struct 149:0263–8231. https://doi.org/10.1016/j.tws.2020.10666910.1016/j.tws.2020.106669 ↗
7. Aghajani Derazkola H, Eyvazian A, Simchi A (2020) Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties. J Manuf Process 50:68–79. https://doi.org/10.1016/j.jmapro.2019.12.03510.1016/j.jmapro.2019.12.035 ↗
8. Dewangan YK, Gupta A, Bandyopadhyay K et al (2025) Incorporation of anisotropy for the failure prediction of AA6061 during SPIF process. Int J Adv Manuf Technol 136:279–296. https://doi.org/10.1007/s00170-024-14017-510.1007/s00170-024-14017-5 ↗
9. Lan S, Liu X, Ni J (2016) Microstructural evolution during friction stir welding of dissimilar aluminum alloy to advanced high-strength steel. Int J Adv Manuf Technol 82:2183–2193. https://doi.org/10.1007/s00170-015-7531-210.1007/s00170-015-7531-2 ↗
10. Kumar G, Maji K (2021) Investigations into enhanced formability of AA5083 aluminum alloy sheet in single-point incremental forming. J Mater Eng Perform 30:1289–1305. https://doi.org/10.1007/s11665-021-05455-310.1007/s11665-021-05455-3 ↗
11. Carlone P, Thuillier S, Andrade-Campos A, de Sousa RJA, Valente R (2021) Incremental forming of friction-stir welded aluminium blanks: an integrated approach. IntJ Mater Form 14(5):1121–1137. https://doi.org/10.1007/s12289-021-01628-610.1007/s12289-021-01628-6 ↗
12. Davarpanah MA, Mirkouei A, Yu X, Malhotra R, Pilla S (2015) Effects of incremental depth and tool rotation on failure modes and microstructural properties in single point incremental forming of polymers. J Mater Process Technol 222:287–300. https://doi.org/10.1016/j.jmatprotec.2015.03.01410.1016/j.jmatprotec.2015.03.014 ↗
13. Szpunar M, Ostrowski R, Dzierwa A (2024) Effect of single-point incremental forming process parameters on roughness of the outer surface of conical drawpieces from CP titanium sheets. Adv Mech Mater Eng 41(1):221–231. https://doi.org/10.7862/rm.2024.1910.7862/rm.2024.19 ↗
14. Gohil A, Modi B (2020) Review of the effect of process parameters on performance measures in the incremental sheet forming process. Proc Inst Mech Eng, Part B: J Eng Manuf 235(3):303–332. https://doi.org/10.1177/095440542096121510.1177/0954405420961215 ↗
15. Tayebi P, Hashemi R (2024) Numerical and experimental study of three-layered Al 1050/Mg AZ31B/ Al 1050 sheets formability considering strain and stress conditions through single point incremental forming. Mater Today Commun 41:110884. https://doi.org/10.1016/j.mtcomm.2024.11088410.1016/j.mtcomm.2024.110884 ↗
16. Kim D, Lee W, Kim J, Kim C, Chung K (2010) Formability evaluation of friction stir welded 6111–T4 sheet with respect to joining material direction. Int J Mech Sci 52(4):612–625. https://doi.org/10.1016/j.ijmecsci.2010.01.00110.1016/j.ijmecsci.2010.01.001 ↗
17. Fallahi Arezoudar A, Hosseini A (2024) A new method for localization of the residual stress distribution and enhancement of wear resistance through underwater friction stir processing with stationary shoulder. Int J Adv Manuf Technol 133:2515–2531. https://doi.org/10.1007/s00170-024-13831-110.1007/s00170-024-13831-1 ↗
18. ASTM (1999) Standard test method for microindentation hardness of materials. ASTM E384–99. West Conshohocken, PA: ASTM International
19. Shubham et al (2022) Investigation on the formability of friction stir welded Al-TWB through incremental forming. IOP Conf Ser: Mater Sci Eng 1238:012046. https://doi.org/10.1088/1757-899X/1238/1/01204610.1088/1757-899X/1238/1/012046 ↗
20. Tayebi P, Fazli A, Asadi P et al (2021) Formability study and metallurgical properties analysis of FSWed AA 6061 blank by the SPIF process. SN Appl Sci 3:367. https://doi.org/10.1007/s42452-021-04378-x10.1007/s42452-021-04378-x ↗
21. Raju C, Neelkamal Haloi C, Narayanan S (2017) Strain distribution and failure mode in single point incremental forming (SPIF) of multiple commercially pure aluminum sheets. J Manuf Process 30:328–335. https://doi.org/10.1016/j.jmapro.2017.09.03310.1016/j.jmapro.2017.09.033 ↗
22. Hosseini A, Fallahi Arezoudar A (2023) Determining the mechanism of defect formation and material flow characteristics in underwater stationary shoulder friction stir welding using coupled Eulerian-Lagrangian simulation. Int J Adv Manuf Technol 127:1755–1778. https://doi.org/10.1007/s00170-023-11513-y10.1007/s00170-023-11513-y ↗
23. Hosseini A, Arezoudar AF (2024) Modified CEL method for determination of defect formation mechanism in underwater stationary shoulder FSW based on softened pressure-overclosure contact relationship. Forces Mech 17:100296. https://doi.org/10.1016/j.finmec.2024.10029610.1016/j.finmec.2024.100296 ↗
24. Hosseini A, Fallahi Arezoudar A (2024) Improving mechanical properties of FSWed AA6061-T6 joint by controlling microstructural changes through utilization of stationary shoulder tool in presence of Al2O3 nanoparticles and external cooling. Int J Precis Eng Manuf-Green Tech 11:1163–1191. https://doi.org/10.1007/s40684-023-00583-810.1007/s40684-023-00583-8 ↗
25. Martins JP, Andrade-Campos A, Thuillier S (2020) Calibration of johnson-cook model using heterogeneous thermo-mechanical tests. Procedia Manuf 47:881–888. https://doi.org/10.1016/j.promfg.2020.04.27410.1016/j.promfg.2020.04.274 ↗
26. Zhang Y, Dong W, Qiao Y et al (2019) Edge effect investigation of DP980 steel sheet in multiple laser scanning process. Int J Precis Eng Manuf 20:319–326. https://doi.org/10.1007/s12541-019-00086-010.1007/s12541-019-00086-0 ↗
27. Jimenez-Mena N, Sapanathan T, Jacques PJ, Simar A (2021) Combined numerical and experimental estimation of the fracture toughness and failure analysis of single lap shear test for dissimilar welds. Eng Fract Mech 249:107756. https://doi.org/10.1016/j.engfracmech.2021.10775610.1016/j.engfracmech.2021.107756 ↗
28. Jonckheere C, de Meester B, Denquin A, Simar A (2013) Torque, temperature and hardening precipitation evolution in dissimilar friction stir welds between 6061–T6 and 2014–T6 aluminum alloys. J Mater Process Technol 213(6):826–837. https://doi.org/10.1016/j.jmatprotec.2013.01.00110.1016/j.jmatprotec.2013.01.001 ↗
29. Lecarme L, Tekog˜lu C, Pardoen T (2011) Void growth and coalescence in ductile solids with stage III and stage IV strain hardening. Int J Plast 27(8):1203–1223. https://doi.org/10.1016/j.ijplas.2011.01.00410.1016/j.ijplas.2011.01.004 ↗
30. Pavlina E, Van Tyne C (2008) Correlation of yield strength and tensile strength with hardness for steels. J Materi Eng Perform 17:888–893. https://doi.org/10.1007/s11665-008-9225-510.1007/s11665-008-9225-5 ↗
31. Nnoka M, Jack TA, Szpunar J (2024) Effects of different microstructural parameters on the corrosion and cracking resistance of pipeline steels: a review. Eng Fail Anal 159:108065. https://doi.org/10.1016/j.engfailanal.2024.10806510.1016/j.engfailanal.2024.108065 ↗
32. Larry Li Y, Kohar CP, Muhammad W, Inal K (2022) Precipitation kinetics and crystal plasticity modeling of artificially aged AA6061. Int J Plast 152:103241. https://doi.org/10.1016/j.ijplas.2022.10324110.1016/j.ijplas.2022.103241 ↗
33. Hakem M, Lebaili S, Mathieu S et al (2019) Effect of microstructure and precipitation phenomena on the mechanical behavior of AA6061-T6 aluminum alloy weld. Int J Adv Manuf Technol 102:2907–2918. https://doi.org/10.1007/s00170-019-03401-110.1007/s00170-019-03401-1 ↗
34. Gao S, Li Y, Yang L, Qiu W (2018) Microstructure and mechanical properties of laser-welded dissimilar DP780 and DP980 high-strength steel joints. Mater Sci Eng, A 720:117–129. https://doi.org/10.1016/j.msea.2018.02.05710.1016/j.msea.2018.02.057 ↗
35. Bozzi S, Helbert-Etter AL, Baudin T, Criqui B, Kerbiguet JG (2010) Intermetallic compounds in Al 6016/IF-steel friction stir spot welds. Mater Sci Eng, A 527(16–17):4505–4509. https://doi.org/10.1016/j.msea.2010.03.09710.1016/j.msea.2010.03.097 ↗
36. Liu X, Lan S, Ni J (2014) Analysis of process parameters effects on friction stir welding of dissimilar aluminum alloy to advanced high strength steel. Mater Des 59:50–62. https://doi.org/10.1016/j.matdes.2014.02.00310.1016/j.matdes.2014.02.003 ↗
37. Sun J, Yamamoto T, Komarov S (2022) Behavior of Al-Zr intermetallic compound particles under high-amplitude ultrasound irradiation into molten aluminium. J Alloy Compd 912:165128. https://doi.org/10.1016/j.jallcom.2022.16512810.1016/j.jallcom.2022.165128 ↗
38. Han K, Ohnuma I, Kainuma R (2016) Experimental determination of phase equilibria of Al-rich portion in the Al–Fe binary system. J Alloy Compd 668:97–106. https://doi.org/10.1016/j.jallcom.2016.01.21510.1016/j.jallcom.2016.01.215 ↗
39. Razaz G, Carlberg T (2019) On the dissolution process of manganese and iron in molten aluminum. Metall Mater Trans A 50:1873–1887. https://doi.org/10.1007/s11661-019-05120-410.1007/s11661-019-05120-4 ↗
40. Mehta KP (2018) A review on friction-based joining of dissimilar aluminum–steel joints. J Mater Res 34(1):78–96. https://doi.org/10.1557/jmr.2018.33210.1557/jmr.2018.332 ↗
41. Wang W, Takata N, Suzuki A, Kobashi M, Kato M (2020) Formation of multiple intermetallic phases in a hypereutectic Al–Fe binary alloy additively manufactured by laser powder bed fusion. Intermetallics 125:106892. https://doi.org/10.1016/j.intermet.2020.10689210.1016/j.intermet.2020.106892 ↗
42. Das H, Ghosh RN, Pal TK (2014) Study on the formation and characterization of the intermetallics in friction stir welding of aluminum alloy to coated steel sheet lap joint. Metall Mater Trans A 45(11):5098–5106. https://doi.org/10.1007/s11661-014-2424-910.1007/s11661-014-2424-9 ↗
43. Hussein SA, Tahir ASM, Hadzley AB (2015) Characteristics of aluminum-to-steel joint made by friction stir welding: a review. Mater Today Commun 5:32–49. https://doi.org/10.1016/j.mtcomm.2015.09.00410.1016/j.mtcomm.2015.09.004 ↗
44. Liu Y, Pang Q, Zhang Z, Hu L (2023) Formation and evolution mechanism of intermetallic compounds of friction stir lap welded steel/aluminum joints. Materials 16(18):6118. https://doi.org/10.3390/ma1618611810.3390/ma16186118 ↗
45. Watanabe M, Feng K, Nakamura Y, Kumai S (2011) Growth manner of intermetallic compound layer produced at welding interface of friction stir spot welded aluminum/steel lap joint. Mater Trans 52(5):953–959. https://doi.org/10.2320/matertrans.L-MZ20112010.2320/matertrans.L-MZ201120 ↗
46. Zhang M, Wang Y, Xue P, Zhang H, Ni D, Wang K, Ma Z (2022) High-quality dissimilar friction stir welding of Al to steel with no contacting between tool and steel plate. Mater Charact 191:112128. https://doi.org/10.1016/j.matchar.2022.11212810.1016/j.matchar.2022.112128 ↗
47. Nguyen HH, Nguyen TN, Vu HC (2018) Forming limit diagram prediction of aa6061-t6 sheet using a microscopic void growth model. In: Duy V, Dao T, Zelinka I, Kim S, Phuong T (eds) AETA 2017–Recent Advances in Electrical Engineering and Related Sciences Theory and Application. AETA 2017 Lecture Notes in Electrical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-69814-4_9810.1007/978-3-319-69814-4_98 ↗
48. Lim SJ, Huh H (2017) Fracture loci of DP980 steel sheet for auto-body at intermediate strain rates. Int.J Automot Technol 18:719–727. https://doi.org/10.1007/s12239-017-0071-z10.1007/s12239-017-0071-z ↗
49. Buffa G, Campanella D, Mirabile R, Fratini L (2013) Improving formability in SPIF processes through high speed rotating tool: experimental and numerical analysis. Key Eng Mater 549:156–163. https://doi.org/10.4028/www.scientific.net/kem.549.15610.4028/www.scientific.net/kem.549.156 ↗