On enhancing the creep performance of modified 9Cr-1Mo steel by employing a secondary short-term heat treatment
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Material Properties and Failure Mechanisms
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Pandey C, Mahapatra MM, Kumar P, Saini N (2018) Some studies on P91 steel and their weldments. https://doi.org/10.1016/j.jallcom.2018.01.12010.1016/j.jallcom.2018.01.120 ↗
2. Lucacci G (2017) Steels and alloys for turbine blades in ultra-supercritical power plants. Mater Ultra-Supercrit Adv Ultra-Supercrit Power Plants. https://doi.org/10.1016/B978-0-08-100552-1.00007-510.1016/B978-0-08-100552-1.00007-5 ↗
3. Maruyama K, Sawada K, Koike JI (2001) Strengthening mechanisms of creep resistant tempered martensitic steel. ISIJ Int 41:641–653. https://doi.org/10.2355/ISIJINTERNATIONAL.41.64110.2355/ISIJINTERNATIONAL.41.641 ↗
4. Payton EJ, Aghajani A, Otto F et al (2012) On the nature of internal interfaces in a tempered martensite ferritic steel and their evolution during long-term creep. Scr Mater 66:1045–1048. https://doi.org/10.1016/J.SCRIPTAMAT.2012.02.04210.1016/J.SCRIPTAMAT.2012.02.042 ↗
5. Morito S, Tanaka H, Konishi R et al (2003) The morphology and crystallography of lath martensite in Fe-C alloys. Acta Mater 51:1789–1799. https://doi.org/10.1016/S1359-6454(02)00577-310.1016/S1359-6454(02)00577-3 ↗
6. Pešička J, Kužel R, Dronhofer A, Eggeler G (2003) The evolution of dislocation density during heat treatment and creep of tempered martensite ferritic steels. Acta Mater 51:4847–4862. https://doi.org/10.1016/S1359-6454(03)00324-010.1016/S1359-6454(03)00324-0 ↗
7. Masumura T, Inami K, Matsuda K et al (2022) Quantitative evaluation of dislocation density in as-quenched martensite with tetragonality by X-ray line profile analysis in a medium-carbon steel. Acta Mater 234:118052. https://doi.org/10.1016/J.ACTAMAT.2022.11805210.1016/J.ACTAMAT.2022.118052 ↗
8. Kimura K, Kushima H, Sawada K (2009) Long-term creep deformation property of modified 9Cr–1Mo steel. Mater Sci Eng A 510–511:58–63. https://doi.org/10.1016/J.MSEA.2008.04.09510.1016/J.MSEA.2008.04.095 ↗
9. Samant SS, Pandey VB, Singh IV, Singh RN (2020) Effect of double austenitization treatment on fatigue crack growth and high cycle fatigue behavior of modified 9Cr–1Mo steel. Mater Sci Eng A 788:139495. https://doi.org/10.1016/J.MSEA.2020.13949510.1016/J.MSEA.2020.139495 ↗
10. Panait CG, Zielińska-Lipiec A, Koziel T et al (2010) Evolution of dislocation density, size of subgrains and MX-type precipitates in a P91 steel during creep and during thermal ageing at 600 °C for more than 100,000 h. Mater Sci Eng A 527:4062–4069. https://doi.org/10.1016/J.MSEA.2010.03.01010.1016/J.MSEA.2010.03.010 ↗
11. Ennis PJ, Zielinska-Lipiec A, Wachter O, Czyrska-Filemonowicz A (1997) Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant. Acta Mater 45:4901–4907. https://doi.org/10.1016/S1359-6454(97)00176-610.1016/S1359-6454(97)00176-6 ↗
12. Yoshino M, Mishima Y, Toda Y et al (2008) Influence of normalizing heat treatment on precipitation behaviour in modified 9Cr-1Mo steel. Mater High Temp 25:149–158. https://doi.org/10.3184/096034008X35634910.3184/096034008X356349 ↗
13. Du Y, Li X, Zhang XU et al (2020) Design and characterization of a heat-resistant ferritic steel strengthened by MX precipitates. Metall Mater Trans A. https://doi.org/10.1007/s11661-019-05525-110.1007/s11661-019-05525-1 ↗
14. Dudko V, Belyakov A, Molodov D, Kaibyshev R (2013) Microstructure evolution and pinning of boundaries by precipitates in a 9 pct Cr heat resistant steel during creep. Metall Mater Trans A Phys Metall Mater Sci. https://doi.org/10.1007/S11661-011-0899-110.1007/S11661-011-0899-1 ↗
15. Shrestha T, Basirat M, Charit I et al (2012) Creep deformation mechanisms in modified 9Cr–1Mo steel. J Nucl Mater 423:110–119. https://doi.org/10.1016/J.JNUCMAT.2012.01.00510.1016/J.JNUCMAT.2012.01.005 ↗
16. Choudhary BK, Isaac Samuel E (2011) Creep behaviour of modified 9Cr–1Mo ferritic steel. J Nucl Mater 412:82–89. https://doi.org/10.1016/J.JNUCMAT.2011.02.02410.1016/J.JNUCMAT.2011.02.024 ↗
17. Zhang XZ, Wu XJ, Liu R et al (2017) Deformation-mechanism-based modeling of creep behavior of modified 9Cr-1Mo steel. Mater Sci Eng A 689:345–352. https://doi.org/10.1016/J.MSEA.2017.02.04410.1016/J.MSEA.2017.02.044 ↗
18. Maruyama K, Sekido N, Yoshimi K (2019) Changes in Monkman-Grant relation among four creep regions of modified 9Cr-1Mo steel. Mater Sci Eng A 749:223–234. https://doi.org/10.1016/J.MSEA.2019.02.00310.1016/J.MSEA.2019.02.003 ↗
19. Yaguchi M (2024) Creep life assessment of modified 9Cr-1Mo steel based on Monkman-Grant relationship considering temperature and stress dependences of strain required for rupture. Mater High Temp. https://doi.org/10.1080/09603409.2024.230549810.1080/09603409.2024.2305498 ↗
20. Dudko V, Belyakov A, Kaibyshev R (2017) Evolution of lath substructure and internal stresses in a 9% Cr steel during creep. ISIJ Int 57:540–549. https://doi.org/10.2355/ISIJINTERNATIONAL.ISIJINT-2016-33410.2355/ISIJINTERNATIONAL.ISIJINT-2016-334 ↗
21. Karthikeyan T, DashRavikirana MK et al (2017) Effect of prior-austenite grain refinement on microstructure, mechanical properties and thermal embrittlement of 9Cr-1Mo-0.1C steel. J Nucl Mater 494:260–277. https://doi.org/10.1016/J.JNUCMAT.2017.07.01910.1016/J.JNUCMAT.2017.07.019 ↗
22. E8 Standard Test Methods for Tension Testing of Metallic Materials. https://www.astm.org/standards/e8. Accessed 13 May 2024
23. Haribabu S, Sudha C, Raju S et al (2019) Effect of Al addition on the microstructure and phase stability of P91 ferritic-martensitic steel. Metall Mater Trans A Phys Metall Mater Sci 50:1421–1436. https://doi.org/10.1007/S11661-018-5077-2/FIGURES/1510.1007/S11661-018-5077-2/FIGURES/15 ↗
24. Tanaka T, Maruyama N, Nakamura N, Wilkinson AJ (2020) Tetragonality of Fe-C martensite—a pattern matching electron backscatter diffraction analysis compared to X-ray diffraction. Acta Mater 195:728–738. https://doi.org/10.1016/J.ACTAMAT.2020.06.01710.1016/J.ACTAMAT.2020.06.017 ↗
25. Guguloth K, Roy N (2017) Creep deformation behavior of 9Cr1MoVNb (ASME Grade 91) steel. Mater Sci Eng A 680:388–404. https://doi.org/10.1016/J.MSEA.2016.10.11210.1016/J.MSEA.2016.10.112 ↗
26. Xiao B, Xu L, Zhao L et al (2018) Transient creep behavior of a novel tempered martensite ferritic steel G115. Mater Sci Eng A 716:284–295. https://doi.org/10.1016/J.MSEA.2018.01.04710.1016/J.MSEA.2018.01.047 ↗
27. Vanaja J, Laha K, Mythili R et al (2012) Creep deformation and rupture behaviour of 9Cr–1W–0.2V–0.06Ta reduced activation ferritic–martensitic steel. Mater Sci Eng A 533:17–25. https://doi.org/10.1016/J.MSEA.2011.10.11210.1016/J.MSEA.2011.10.112 ↗
28. Xiao B, Xu L, Zhao L et al (2018) Creep properties, creep deformation behavior, and microstructural evolution of 9Cr-3W-3Co-1CuVNbB martensite ferritic steel. Mater Sci Eng A 711:434–447. https://doi.org/10.1016/J.MSEA.2017.11.06110.1016/J.MSEA.2017.11.061 ↗
29. Bertrand C, Allou A, Beauchamp F et al (2014) Thermomechanical model and bursting tests to evaluate the risk of swelling and bursting of modified 9Cr-1Mo steel steam generator tubes during a sodium-water reaction accident. Sci Technol Nucl Install 2014:974581. https://doi.org/10.1155/2014/97458110.1155/2014/974581 ↗
30. Pandey C, Mahapatra MM, Kumar P et al (2017) Microstructure-based assessment of creep rupture behaviour of cast-forged P91 steel. Mater Sci Eng A 695:291–301. https://doi.org/10.1016/J.MSEA.2017.04.03710.1016/J.MSEA.2017.04.037 ↗
31. Ghosh G, Olson GB (2002) The isotropic shear modulus of multicomponent Fe-base solid solutions. Acta Mater 50:2655–2675. https://doi.org/10.1016/S1359-6454(02)00096-410.1016/S1359-6454(02)00096-4 ↗
32. HajyAkbary F, Sietsma J, Böttger AJ, Santofimia MJ (2015) An improved X-ray diffraction analysis method to characterize dislocation density in lath martensitic structures. Mater Sci Eng A 639:208–218. https://doi.org/10.1016/J.MSEA.2015.05.00310.1016/J.MSEA.2015.05.003 ↗
33. Williamson GK, Hall WH (1953) X-ray line broadening from filed aluminium and wolfram. Acta Metall 1:22–31. https://doi.org/10.1016/0001-6160(53)90006-610.1016/0001-6160(53)90006-6 ↗
34. Langford JI, Wilson AJC, IUCr, IUCr (1978) Scherrer after sixty years: A survey and some new results in the determination of crystallite size. urn:issn:0021–8898 11:102–113. https://doi.org/10.1107/S002188987801284410.1107/S0021889878012844 ↗
35. Gallet J, Perez M, Guillou R et al (2023) Experimental measurement of dislocation density in metallic materials: a quantitative comparison between measurements techniques (XRD, R-ECCI, HR-EBSD, TEM). Mater Charact 199:112842. https://doi.org/10.1016/J.MATCHAR.2023.11284210.1016/J.MATCHAR.2023.112842 ↗
36. Ungár T (2001) Dislocation densities, arrangements and character from X-ray diffraction experiments. Mater Sci Eng A 309–310:14–22. https://doi.org/10.1016/S0921-5093(00)01685-310.1016/S0921-5093(00)01685-3 ↗
37. Li M, Wang L, Almer JD (2014) Dislocation evolution during tensile deformation in ferritic–martensitic steels revealed by high-energy X-rays. Acta Mater 76:381–393. https://doi.org/10.1016/J.ACTAMAT.2014.05.02610.1016/J.ACTAMAT.2014.05.026 ↗
38. Lu Y, Yu H, Sisson RD (2017) The effect of carbon content on the c/a ratio of as-quenched martensite in Fe-C alloys. Mater Sci Eng A 700:592–597. https://doi.org/10.1016/J.MSEA.2017.05.09410.1016/J.MSEA.2017.05.094 ↗
39. Isik MI, Kostka A, Eggeler G (2014) On the nucleation of Laves phase particles during high-temperature exposure and creep of tempered martensite ferritic steels. Acta Mater 81:230–240. https://doi.org/10.1016/J.ACTAMAT.2014.08.00810.1016/J.ACTAMAT.2014.08.008 ↗
40. Zhu NQ, Lu L, He YL et al (2012) Coarsening of M23C6 precipitates in an Fe-Cr-C ternary alloy. J Iron Steel Res Int 19:62–67. https://doi.org/10.1016/S1006-706X(13)60009-610.1016/S1006-706X(13)60009-6 ↗
41. Godec M (2016) Balantič DAS (2016) Coarsening behaviour of M23C6 carbides in creep-resistant steel exposed to high temperatures. Sci Rep 6:1–7. https://doi.org/10.1038/srep2973410.1038/srep29734 ↗
42. Wang H, Yan W, van Zwaag S et al (2017) On the 650 °C thermostability of 9–12Cr heat resistant steels containing different precipitates. Acta Mater 134:143–154. https://doi.org/10.1016/J.ACTAMAT.2017.05.06910.1016/J.ACTAMAT.2017.05.069 ↗
43. Peng ZF, Liu S, Yang C et al (2018) The effect of phase parameter variation on hardness of P91 components after service exposures at 530–550 °C. Acta Mater 143:141–155. https://doi.org/10.1016/J.ACTAMAT.2017.10.01010.1016/J.ACTAMAT.2017.10.010 ↗
44. Xu Y, Li W, Wang M et al (2019) Nano-sized MX carbonitrides contribute to the stability of mechanical properties of martensite ferritic steel in the later stages of long-term aging. Acta Mater 175:148–159. https://doi.org/10.1016/J.ACTAMAT.2019.06.01210.1016/J.ACTAMAT.2019.06.012 ↗
45. Sawada K, Takeda M, Maruyama K et al (1999) Effect of W on recovery of lath structure during creep of high chromium martensitic steels. Mater Sci Eng A 267:19–25. https://doi.org/10.1016/S0921-5093(99)00066-010.1016/S0921-5093(99)00066-0 ↗
46. Wilshire B, Scharning PJ (2008) A new methodology for analysis of creep and creep fracture data for 9–12% chromium steels. Int Mater Rev 53:91–104. https://doi.org/10.1179/174328008X25434910.1179/174328008X254349 ↗
47. Abe F (2004) Coarsening behavior of lath and its effect on creep rates in tempered martensitic 9Cr–W steels. Mater Sci Eng A 387–389:565–569. https://doi.org/10.1016/J.MSEA.2004.01.05710.1016/J.MSEA.2004.01.057 ↗
48. Manohar PA, Ferry M, Chandra T (1998) Five decades of the zener equation. ISIJ Int 38:913–924. https://doi.org/10.2355/ISIJINTERNATIONAL.38.91310.2355/ISIJINTERNATIONAL.38.913 ↗
49. Rollett A, Humphreys F, Rohrer GS, Hatherly M (2004) Recrystallization and Related Annealing Phenomena: Second Edition. Recrystallization and Related Annealing Phenomena: Second Edition 1–628. https://doi.org/10.1016/B978-0-08-044164-1.X5000-210.1016/B978-0-08-044164-1.X5000-2 ↗
50. Xiao B, Yadav SD, Zhao L et al (2021) Deep insights on the creep behavior and mechanism of a novel G115 steel: micromechanical modeling and experimental validation. Int J Plast 147:103124. https://doi.org/10.1016/J.IJPLAS.2021.10312410.1016/J.IJPLAS.2021.103124 ↗