Design of high strength Al–Cu based alloy by minor addition of Hf and Zr
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Kim Y-W, Griffith WM (eds) (1988) Dispersion strengthened aluminum alloys. TMS, Warrendale, PA
2. Polmear IJ, Couper MJ (1988) Design and development of an experimental wrought aluminum alloy for use at elevated temperatures. Metall Trans A 19:1027–103510.1007/BF02628387 ↗
3. Fine ME (1975) Precipitation hardening of aluminum alloys. Metall Trans A 6:625–63010.1007/BF02672283 ↗
4. Ardell AJ (1985) Precipitation hardening. Metall Trans A 16:2131–216510.1007/BF02670416 ↗
5. Gleiter H, Hornbogen E (1968) Precipitation hardening by coherent particles. Mater Sci Eng 2:285–30210.1016/0025-5416(68)90047-5 ↗
6. Martin JW (2012) Precipitation hardening: theory and applications. Butterworth-Heinemann, Oxford
7. Marlaud T, Deschamps A, Bley F et al (2010) Influence of alloy composition and heat treatment on precipitate composition in Al–Zn–Mg–Cu alloys. Acta Mater 58:248–26010.1016/j.actamat.2009.09.003 ↗
8. Muddle BC, Polmear IJ (1989) The precipitate $Ømega$ phase in Al-Cu-Mg–Ag alloys. Acta Metall 37:777–78910.1016/0001-6160(89)90005-9 ↗
9. Wang SC, Starink MJ (2005) Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys. Int Mater Rev 50:193–21510.1179/174328005X14357 ↗
10. Wang SC, Starink MJ (2007) Two types of S phase precipitates in Al–Cu–Mg alloys. Acta Mater 55:933–94110.1016/j.actamat.2006.09.015 ↗
11. Radmilovic V, Thomas G, Shiflet GJ, Starke EA (1989) On the nucleation and growth of Al 2 CuMg (S′) in Al Li Cu Mg and Al Cu Mg alloys. Scr Metall 23:1141–114610.1016/0036-9748(89)90315-3 ↗
12. Sha G, Cerezo A (2004) Early-stage precipitation in Al–Zn–Mg–Cu alloy (7050). Acta Mater 52:4503–451610.1016/j.actamat.2004.06.025 ↗
13. Ringer SP, Muddle BC, Polmear IJ (1995) Effects of cold work on precipitation in Al–Cu–Mg–(Ag) and Al–Cu–Li–(Mg-Ag) alloys. Metall Mater Trans A 26:1659–167110.1007/BF02670753 ↗
14. Sang-Yong L, Jung-Hwan L, Young-Seon L (2001) Characterization of Al 7075 alloys after cold working and heating in the semi-solid temperature range. J Mater Process Technol 111:42–4710.1016/S0924-0136(01)00494-0 ↗
15. Deschamps A, Brechet Y (1998) Influence of predeformation and ageing of an Al–Zn–Mg alloy—II. Modeling of precipitation kinetics and yield stress. Acta Mater 47:293–30510.1016/S1359-6454(98)00296-1 ↗
16. Mrówka-Nowotnik G, Sieniawski J (2005) Influence of heat treatment on the microstructure and mechanical properties of 6005 and 6082 aluminium alloys. J Mater Process Technol 162:367–37210.1016/j.jmatprotec.2005.02.115 ↗
17. Chen K, Liu H, Zhang Z et al (2003) The improvement of constituent dissolution and mechanical properties of 7055 aluminum alloy by stepped heat treatments. J Mater Process Technol 142:190–19610.1016/S0924-0136(03)00597-1 ↗
18. Knipling KE, Dunand DC, Seidman DN (2008) Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600 °C. Acta Mater 56:1182–119510.1016/j.actamat.2007.11.011 ↗
19. Booth-Morrison C, Dunand DC, Seidman DN (2011) Coarsening resistance at 400 °C of precipitation-strengthened Al–Zr–Sc–Er alloys. Acta Mater 59:7029–704210.1016/j.actamat.2011.07.057 ↗
20. Booth-Morrison C, Seidman DN, Dunand DC (2012) Effect of Er additions on ambient and high-temperature strength of precipitation-strengthened Al–Zr–Sc–Si alloys. Acta Mater 60:3643–365410.1016/j.actamat.2012.02.030 ↗
21. De Luca A, Seidman DN, Dunand DC (2020) Mn and Mo additions to a dilute Al–Zr–Sc–Er–Si-based alloy to improve creep resistance through solid-solution- and precipitation-strengthening. Acta Mater 194:60–67. https://doi.org/10.1016/j.actamat.2020.04.02210.1016/j.actamat.2020.04.022 ↗
22. Shyam A, Roy S, Shin D et al (2019) Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation. Mater Sci Eng A 765:138279. https://doi.org/10.1016/j.msea.2019.13827910.1016/j.msea.2019.138279 ↗
23. Rakhmonov JU, Bahl S, Shyam A, Dunand DC (2022) Cavitation-resistant intergranular precipitates enhance creep performance of θ′-strengthened Al–Cu based alloys. Acta Mater 228:117788. https://doi.org/10.1016/j.actamat.2022.11778810.1016/j.actamat.2022.117788 ↗
24. Davis JR, Davis JR et al (1993) Aluminum and aluminum alloys. ASM international, Detroit
25. Polmear IJ (1989) Light alloys: metallurgy of the light metals//((Book)). Edw Arnold, London
26. Boyd JD, Nicholson RB (1971) The coarsening behaviour of $þeta$ ″and $þeta$′ precipitates in two Al–Cu alloys. Acta Metall 19:1379–139110.1016/0001-6160(71)90076-9 ↗
27. Starink MJ, Wang SC (2003) A model for the yield strength of overaged Al–Zn–Mg–Cu alloys. Acta Mater 51:5131–515010.1016/S1359-6454(03)00363-X ↗
28. Deschamps A, Livet F, Brechet Y (1998) Influence of predeformation on ageing in an Al–Zn–Mg alloy—I. Microstructure evolution and mechanical properties. Acta Mater 47:281–29210.1016/S1359-6454(98)00293-6 ↗
29. Nicolas M, Deschamps A (2003) Characterisation and modelling of precipitate evolution in an Al–Zn–Mg alloy during non-isothermal heat treatments. Acta Mater 51:6077–609410.1016/S1359-6454(03)00429-4 ↗
30. Srinivasan S, Desch PB, Schwarz RB (1991) Metastable phases in the Al 3 X (X= Ti, Zr, and Hf) intermetallic system. Scr Metall Mater 25:2513–251610.1016/0956-716X(91)90059-A ↗
31. Clouet E, Laé L, Épicier T et al (2006) Complex precipitation pathways in multicomponent alloys. Nat Mater 5:482–48810.1038/nmat1652 ↗
32. Nes E (1972) Precipitation of the metastable cubic Al 3 Zr-phase in subperitectic Al–Zr alloys. Acta Metall 20:499–50610.1016/0001-6160(72)90005-3 ↗
33. Forbord B, Lefebvre W, Danoix F et al (2004) Three dimensional atom probe investigation on the formation of Al 3 (Sc, Zr)-dispersoids in aluminium alloys. Scr Mater 51:333–33710.1016/j.scriptamat.2004.03.033 ↗
34. Fuller CB, Seidman DN, Dunand DC (2003) Mechanical properties of Al (Sc, Zr) alloys at ambient and elevated temperatures. Acta Mater 51:4803–481410.1016/S1359-6454(03)00320-3 ↗
35. Peng G, Chen K, Fang H, Chen S (2012) A study of nanoscale Al 3 (Zr, Yb) dispersoids structure and thermal stability in Al–Zr–Yb alloy. Mater Sci Eng A 535:311–31510.1016/j.msea.2011.12.094 ↗
36. Knipling KE, Karnesky RA, Lee CP et al (2010) Precipitation evolution in Al–0.1 Sc, Al–0.1 Zr and Al–0.1 Sc–0.1 Zr (at.%) alloys during isochronal aging. Acta Mater 58:5184–519510.1016/j.actamat.2010.05.054 ↗
37. Kumar Makineni S, Sugathan S, Meher S et al (2017) Enhancing elevated temperature strength of copper containing aluminium alloys by forming L12 Al3Zr precipitates and nucleating θ″ precipitates on them. Sci Rep 7:11154. https://doi.org/10.1038/s41598-017-11540-210.1038/s41598-017-11540-2 ↗
38. Jia Z, Couzinié J-P, Cherdoudi N et al (2012) Precipitation behaviour of Al3Zr precipitate in Al–Cu–Zr and Al–Cu–Zr–Ti–V alloys. Trans Nonferrous Met Soc China 22:1860–1865. https://doi.org/10.1016/S1003-6326(11)61398-810.1016/S1003-6326(11)61398-8 ↗
39. Mikhaylovskaya AV, Mochugovskiy AG, Levchenko VS et al (2018) Precipitation behavior of L12 Al3Zr phase in Al–Mg–Zr alloy. Mater Charact 139:30–37. https://doi.org/10.1016/j.matchar.2018.02.03010.1016/j.matchar.2018.02.030 ↗
40. Bansal U, Chattopadhyay K (2022) Newer developments in aluminium alloys through ordered precipitates and segregation of transition elements. Trans Indian Inst Met 75:1015–1030. https://doi.org/10.1007/s12666-022-02547-z10.1007/s12666-022-02547-z ↗
41. Srinivasarao B, Suryanarayana C, Oh-ishi K, Hono K (2009) Microstructure and mechanical properties of Al–Zr nanocomposite materials. Mater Sci Eng A 518:100–107. https://doi.org/10.1016/j.msea.2009.04.03210.1016/j.msea.2009.04.032 ↗
42. Bansal U, Singh MP, Sinha SK et al (2023) Strength and stability through variable micro segregation behaviour of Ta and Zr solutes at intermetallic interfaces in Al–Cu alloys. Acta Mater 259:119254. https://doi.org/10.1016/j.actamat.2023.11925410.1016/j.actamat.2023.119254 ↗
43. Wang Z, Pu Q, Li Y et al (2023) Microstructures and mechanical properties of Al–Zn–Mg–Cu alloy with the combined addition of Ti and Zr. J Mater Res Technol 22:747–761. https://doi.org/10.1016/j.jmrt.2022.11.10610.1016/j.jmrt.2022.11.106 ↗
44. Reed RC, Tao T, Warnken N (2009) Alloys-by-design: application to nickel-based single crystal superalloys. Acta Mater 57:5898–591310.1016/j.actamat.2009.08.018 ↗
45. Caron P, Khan T (1983) Improvement of Creep strength in a nickel-base single-crystal superalloy by heat treatment. Mater Sci Eng 61:173–184. https://doi.org/10.1016/0025-5416(83)90199-410.1016/0025-5416(83)90199-4 ↗
46. Sato J, Omori T, Oikawa K et al (2006) Cobalt-base high-temperature alloys. Science 312:90–9110.1126/science.1121738 ↗
47. Makineni SK, Nithin B, Chattopadhyay K (2015) A new tungsten-free γ–γ’ Co–Al–Mo–Nb-based superalloy. Scr Mater 98:36–39. https://doi.org/10.1016/j.scriptamat.2014.11.00910.1016/j.scriptamat.2014.11.009 ↗
48. Makineni SK, Nithin B, Chattopadhyay K (2015) Synthesis of a new tungsten-free γ–γ′ cobalt-based superalloy by tuning alloying additions. Acta Mater 85:85–94. https://doi.org/10.1016/j.actamat.2014.11.01610.1016/j.actamat.2014.11.016 ↗
49. Knipling KE, Dunand DC, Seidman DN (2006) Criteria for developing castable, creep-resistant aluminum-based alloys: a review. Z Für Met 97:246–265
50. Davydov VG, Rostova TD, Zakharov VV et al (2000) Scientific principles of making an alloying addition of scandium to aluminium alloys. Mater Sci Eng A 280:30–3610.1016/S0921-5093(99)00652-8 ↗
51. Chen BA, Liu G, Wang RH et al (2013) Effect of interfacial solute segregation on ductile fracture of Al–Cu–Sc alloys. Acta Mater 61:1676–169010.1016/j.actamat.2012.11.043 ↗
52. Norman AF, Hyde K, Costello F et al (2003) Examination of the effect of Sc on 2000 and 7000 series aluminium alloy castings: for improvements in fusion welding. Mater Sci Eng A 354:188–19810.1016/S0921-5093(02)00942-5 ↗
53. Taylor JA, Parker BA, Ij P (1978) Precipitation in AI–Cu–Mg–Ag casting alloy. Met Sci 12:478–48210.1179/030634578790433341 ↗
54. Polmear IJ, Chester RJ (1989) Abnormal age hardening in an Al Cu Mg alloy containing silver and lithium. Scr Metall 23:1213–121710.1016/0036-9748(89)90329-3 ↗
55. Reich L, Murayama M, Hono K (1998) Evolution of $Ømega$ phase in an Al–Cu–Mg–Ag alloy: a three-dimensional atom probe study. Acta Mater 46:6053–606210.1016/S1359-6454(98)00280-8 ↗
56. Lumley RN, Morton AJ, Polmear IJ (2002) Enhanced creep performance in an Al–Cu–Mg–Ag alloy through underageing. Acta Mater 50:3597–360810.1016/S1359-6454(02)00164-7 ↗
57. Bansal U, Singh MP, Mondol S et al (2022) The interplay of precipitation of ordered compounds and interfacial segregation in Al–Cu–Hf–Si alloys for high-temperature strength. Acta Mater 240:118355. https://doi.org/10.1016/j.actamat.2022.11835510.1016/j.actamat.2022.118355 ↗
58. Chaudhury ZA, Suryanarayana C (1984) A TEM study of decomposition behavior of a melt-quenched Al–Zr alloy. Metallography 17:231–25210.1016/0026-0800(84)90060-0 ↗
59. Ryum N (1975) Precipitation in an Al-1.78 wt% Hf alloy after rapid solidification. J Mater Sci 10:2075–208110.1007/BF00557486 ↗