Mechanical response of reaction phases of the TiAl/steel brazed joint under a tensile load
Source abstract
Abstract
This article offers a study of a mechanical response of the TiAl/Steel brazed joint. The (i) intermetallic reaction layer’s phases, (ii) the residue filler, and the (iii) base metals constitute the complex structure considered. The study features TiAl and 42CrMo steel brazed with an AgCuTi filler metal. The analysis includes the microstructural study and an evaluation of mechanical properties of the brazed joint. In addition, the fracture behavior of the joint under a tensile loading in situ is studied in the context of the impact that reaction phases may have on the joint properties. The results of the study indicate that the complex joint structure is due to the presence of a ternary intermetallic reaction layer, as well as the presence of intermetallics in the filler residue. The multilayered structure includes Ti3Al+AlCuTi+AlCu2Ti ternary intermetallic reaction layer, Ag(Cu) residue filler, AlCu2Ti intermetallic dispersed in the residue braze and TiC layer. The hardness sequence of the structure has been established. The crack initiation, its propagation, and an ultimate fracture are associated primarily with Ti3Al+AlCuTi+AlCu2Ti ternary intermetalics layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Yamaguchi M, Inui H, Ito K (2000) Acta Mater 48:30710.1016/S1359-6454(99)00301-8 ↗
2. Wallgram W, Schmoelzer T, Cha LM (2009) Int J Mater Res 100:102110.3139/146.110154 ↗
3. Zhang CP, Zhang KF (2010) J Alloys Compd 492:23610.1016/j.jallcom.2009.12.028 ↗
4. Shagiev MR, Senkov ON, Salishchev GA, Froes FH (2000) J Alloys Compd 313:20110.1016/S0925-8388(00)01167-1 ↗
5. Clemens H, Kestler H (2000) Adv Eng Mater 2:55110.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
6. Noda T (1998) Intermetallics 6:70910.1016/S0966-9795(98)00060-0 ↗
7. Lee WB, Kim MG, Koo JM (2004) J Mater Sci 39:1125. doi: 10.1023/B:JMSC.0000012960.59095.5a10.1023/B:JMSC.0000012960.59095.5a ↗
8. He P, Feng JC, Xu W (2006) Mater Sci Eng A 418:5310.1016/j.msea.2005.11.003 ↗
9. Liu HJ, Feng JC (2002) J Mater Sci Lett 21:9. doi: 10.1023/A:101426992313310.1023/A:1014269923133 ↗
10. Li YL, Feng JC, He P (2006) Scripta Mater 55:17110.1016/j.scriptamat.2006.03.055 ↗
11. Noda T, Shimizu T, Okabe M, Iikubo T (1997) Mater Sci Eng A 239–240:61310.1016/S0921-5093(97)00638-2 ↗
12. Song XG, Cao J, Liu YZ, Feng JC (2012) Intermetallics 22:13610.1016/j.intermet.2011.10.020 ↗
13. Cheng YT, Cheng CM (2000) Surf Coat Tech 133–134:41710.1016/S0257-8972(00)00896-3 ↗
14. Oliver WC, Pharr GM (2004) J Mater Res 19:310.1557/jmr.2004.19.1.3 ↗
15. Shiue RK, Wu SK, Chen SY (2003) Acta Mater 51:199110.1016/S1359-6454(02)00606-7 ↗
16. Shiue RK, Wu SK, Chen SY (2004) Intermetallics 12:92910.1016/j.intermet.2004.02.006 ↗
17. Li YL, Liu W, Sekulic DP, He P (2012) Appl Surf Sci 259:34310.1016/j.apsusc.2012.07.047 ↗
18. Li YL, Liu W, He P, Feng JC, Sekulic DP (2013) J Mater Sci 48:5247. doi: 10.1007/s10853-013-7315-810.1007/s10853-013-7315-8 ↗
19. Lee SJ, Wu SK, Lin RY (1998) Acta Mater 46:128310.1016/S1359-6454(97)00298-X ↗
20. Li Y, Liu W, Sekulic DP, He P, Feng J (2012) Mechanical response of the TiAl/steel brazed joint under micro-indentation and micro-hardness test. AWS International Brazing and Soldering Conference, LasVegas, p 423