journal article·2023-05

Comparison of mechanical properties of 2024Al composites strengthened with the carbon fibers and/or ZrC particles

Xuan Zhou, Yimin Gao, Yiran Wang, Peng Xiao

Journal of Materials Science· Volume 58· Issue 19
Publisher page

Abstract

In this work, the ZrC particles and/or Ni-coated carbon fibers-reinforced 2024Al matrix composites are prepared by spark plasm sintering and solution aging treatment, which are denoted as Cf(Ni)–ZrC/2024Al, ZrC/2024Al, and Cf(Ni)/2024Al composites. It takes 12 h for 2024Al alloy, 10 h for ZrC/2024Al and Cf(Ni)/2024Al, and 8 h for Cf(Ni)–ZrC/2024Al to reach the peak-aged condition. The increased number of interfaces and the growing dislocations account for the accelerated aging behavior. Among all prepared samples, the Cf(Ni)–ZrC/2024Al demonstrates the highest hardness of 139.4 HV, which is 17.8% higher than the 2024Al. The tensile experiments indicate the Cf(Ni)–ZrC/2024Al displays the highest yield strength of 350.5 MPa, tensile strength of 536.4 MPa, and strain of 14.8%, which has 56.7%, 45.8%, 52.6% increasements, respectively, over those of 2024Al. The results illustrate that dual reinforcement demonstrates a better strengthening and toughening effect than the monolithic reinforcement. The improvement of strength and strain of Cf(Ni)–ZrC/2024Al is contributed to the load transfer effect, dislocation strengthening, grain refinement, and Orowan strengthening.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Clyne TW, Withers PJ (1993) An introduction to metal matrix composites. Cambridge University Press, Cambridge10.1017/CBO9780511623080 ↗
2. Chawla N, Chawla KK (2006) Applications. metal matrix composites, 2nd edn. Springer, New York, pp 325–35210.1007/b101197 ↗
3. Miracle DB (2005) Metal matrix composites—from science to technological significance. Compos Sci Technol 65:2526–254010.1016/j.compscitech.2005.05.027 ↗
4. Garg P, Jamwal A, Kumar D, Sadasivuni KK, Hussain CM, Gupta P (2019) Advance research progresses in aluminium matrix composites: manufacturing & applications. J Mater Res Technol 8:4924–493910.1016/j.jmrt.2019.06.028 ↗
5. Binner J, Chang H, Higginson R (2009) Processing of ceramic-metal interpenetrating composites. J Eur Ceram Soc 29:837–84210.1016/j.jeurceramsoc.2008.07.034 ↗
6. Ibrahim IA, Lavernia EJ (1991) Particulate reinforced metal matrix composites -a review. J Mater Sci 26:1137–115610.1007/BF00544448 ↗
7. Hayrettin A, Tolga K, Ercan C, Huseyin Ç (2006) Wear behaviour of Al/(Al2O3p +SiCp) hybrid composites. Tribol Int 39:213–22010.1016/j.triboint.2005.01.029 ↗
8. Cui Y, Jin T, Cao L, Liu F (2016) Aging behavior of high volume fraction SiCp/Al composites fabricated by pressureless infiltration. J Alloy Compd 681:233–23910.1016/j.jallcom.2016.04.127 ↗
9. Guo X, Guo Q, Nie J, Liu Z, Li Z, Fan G, Xiong DB, Su Y, Fan J, Zhang D (2018) Particle size effect on the interfacial properties of SiC particle-reinforced Al-Cu-Mg composites. Mater Sci Eng A 711:643–64910.1016/j.msea.2017.11.068 ↗
10. Nemati N, Khosroshahi R, Emamy M, Zolriasatein A (2011) Investigation of microstructure, hardness and wear properties of Al-4.5wt.%Cu-TiC nanocomposites produced by mechanical milling. Mater Des 32(2):3718–372910.1016/j.matdes.2011.03.056 ↗
11. Du R, Gao Q, Wu S, Lü S, Zhou X (2018) Influence of TiB2 particles on aging behavior of in-situ TiB2/Al-4.5Cu composites. Mater Sci Eng A 721:244–25010.1016/j.msea.2018.02.099 ↗
12. Ma Y, Geng J, Chen Z, Wang M, Chen D, Ji G, Ji V, Wang H (2019) Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite. Eng Fract Mech 207:23–3510.1016/j.engfracmech.2018.12.011 ↗
13. Kai W, Yang JM (1989) Mechanical behavior of B4C particulate reinforced 7091 aluminum composite. Scr Mater 23:1277–1280
14. Ceschini L, Minak G, Morri A (2006) Tensile and fatigue properties of the AA6061/20vol% Al2O3p and AA7005/10vol% Al2O3p composites. Compos Sci Technol 66:333–34210.1016/j.compscitech.2005.04.044 ↗
15. Khajuria A, Akhtar M, Pandey MK, Singh MP, Raina A, Bedi R, Singh B (2019) Influence of ceramic Al2O3 particulates on performance measures and surface characteristics during sinker EDM of stir cast AMMCs. World J Eng 16(4):526–53810.1108/WJE-01-2019-0015 ↗
16. Khajuria A, Bedi R, Singh B, Akhtar M (2018) EDM machinability and parametric optimisation of 2014Al/Al2O3 composite by RSM. Int J Mach Mach Mater 20:536–555
17. Zhang ZY, Chen G, Zhang SL, Zhao YT, Yang R, Liu MP (2019) Enhanced strength and ductility in ZrB2/2024Al nanocomposite with a quasi-network architecture. J Alloy Compd 778:833–83810.1016/j.jallcom.2018.11.214 ↗
18. Yang R, Zhang ZY, Zhao YT (2016) Microstructure-property analysis of ZrB2/6061Al hierarchical nanocomposites fabricated by direct melt reaction. Mater Char 112:51–5910.1016/j.matchar.2015.12.012 ↗
19. Stein J, Lenczowski B, Fréty N, Anglaret E (2012) Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes. Carbon 50:2264–227210.1016/j.carbon.2012.01.044 ↗
20. Liao JZ, Tan MJ, Sridhar I (2010) Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites. Mater Des 31:S96–S10010.1016/j.matdes.2009.10.022 ↗
21. Xin L, Yang W, Zhao Q, Dong R, Wu P, Xiu Z, Hussain M, Wu GH (2017) Strengthening behavior in SiC nanowires reinforced pure Al composite. J Alloy Compd 695:2406–241210.1016/j.jallcom.2016.11.134 ↗
22. Yang QR, Liu JX, Li SK, Wang FC, Wu TT (2014) Fabrication and mechanical properties of Cu-coated woven carbon fibers reinforced aluminum alloy composite. Mater Des 57:442–44810.1016/j.matdes.2013.12.064 ↗
23. Liu ZG, Mang XB, Chai LH, Chen YY (2010) Interface study of carbon fibre reinforced Al-Cu composites. J Alloy Compd 504S:S512–S51410.1016/j.jallcom.2010.04.081 ↗
24. Qian MF, Zhang XX, Li JC, Gao X, Geng L (2019) Microstructure and mechanical properties of ABOw and nickel-coated MWCNTs reinforced 2024Al hybrid composite fabricated by squeeze casting. Mater Chem Phy 226:344–34910.1016/j.matchemphys.2019.01.053 ↗
25. Kaveendran B, Wang GS, Huang LJ, Geng L, Luo Y, Peng HX (2013) In situ (Al3Zrp+Al2O3np)/2024Al metal matrix composite with controlled reinforcement architecture fabricated by reaction hot pressing. Mater Sci Eng A 583:89–9510.1016/j.msea.2013.07.002 ↗
26. Zhang XZ, Zhang Q, Hu H (2014) Tensile behaviour and microstructure of magnesium AM60-based hybrid composite containing Al2O3 fibres and particles. Mater Sci Eng A 607:269–27610.1016/j.msea.2014.03.069 ↗
27. Feng YC, Geng L, Zheng PQ, Zheng ZZ, Wang GS (2008) Fabrication and characteristic of Al-based hybrid composite reinforced with tungsten oxide particle and aluminum borate whisker by squeeze casting. Mater Des 29:2023–202610.1016/j.matdes.2008.04.006 ↗
28. Tang SS, Shao SY, Liu HY, Jiang FL, Fu DF, Zhang H, Teng J (2021) Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles. Mater Sci Eng A 804:14073210.1016/j.msea.2021.140732 ↗
29. Deng KK, Shi JY, Wang CJ, Wang XJ, Wu YW, Nie KB, Wu K (2012) Microstructure and strengthening mechanism of bimodal size particle reinforced magnesium matrix composite. Compos Part A 43:1280–128410.1016/j.compositesa.2012.03.007 ↗
30. Chand S (2000) Review carbon fibers for composites. J Mater Sci 35:1303–131310.1023/A:1004780301489 ↗
31. Li DG, Chen GQ, Jiang LT, Xiu ZY, Zhang YH, Wu GH (2013) Effect of thermal cycling on the mechanical properties of Cf/Al composites. Mater Sci Eng A 586:330–33710.1016/j.msea.2013.05.023 ↗
32. Daoud A (2005) Microstructure and tensile properties of 2014 Al alloy reinforced with continuous carbon fibers manufactured by gas pressure infiltration. Mater Sci Eng A 391:114–12010.1016/j.msea.2004.08.075 ↗
33. Tang YP, Liu L, Li WW, Shen B, Hu WB (2009) Interface characteristics and mechanical properties of short carbon fibers/Al composites with different coatings. Appl Surf Sci 255:4393–440010.1016/j.apsusc.2008.10.124 ↗
34. Cauê CS, Guilherme MV, Márcio CF, Ulrich T (2019) Low-pressure processing and microstructural evaluation of unidirectional carbon fiber-reinforced aluminum-nickel matrix composites. J Mater Process Tech 269:10–1510.1016/j.jmatprotec.2019.01.032 ↗
35. Ding RF, Wang H, Jiang Y, Liu R, Jing K, Sun M (2019) Effects of ZrC addition on the microstructure and mechanical properties of Fe-Cr-Al alloys fabricated by spark plasma sintering. J Alloy Compd 805:1025–103310.1016/j.jallcom.2019.07.181 ↗
36. Tuzemen C, Yavas B, Akin I, Yucel O, Sahin F, Goller G (2019) Production and characterization of TZM based TiC or ZrC reinforced composites prepared by spark plasma sintering (SPS). J Alloy Compd 781:433–43910.1016/j.jallcom.2018.11.383 ↗
37. Zhou X, Gao YM, Wang YR, Lu XQ, Li YF (2021) Fabrication and characteristic of 2024Al matrix composites reinforced by carbon fibers and ZrCp by spark plasma sintering. J Alloy Compd 889:16154310.1016/j.jallcom.2021.161543 ↗
38. Yang HB, Gao T, Zhang H, Nie JF, Liu XF (2019) Enhanced age-hardening behavior in Al-Cu alloys induced by in-situ synthesized TiC nanoparticles. J Mate Sci Technol 35:374–38210.1016/j.jmst.2018.09.029 ↗
39. Mandal A, Chakraborty M, Murty BS (2008) Ageing behavior of A356 alloy reinforced with in-situ formed TiB2 particles. Mater Sci Eng A 489:220–22610.1016/j.msea.2008.01.042 ↗
40. Mozammil S, Karloopia J, Verma R, Jha PK (2019) Effect of varying TiB2 reinforcement and its ageing behaviour on tensile and hardness properties of in-situ Al-4.5%Cu-xTiB2 composite. J Alloy Compd 793:454–46610.1016/j.jallcom.2019.04.137 ↗
41. Chen G, Jin Y, Zhang HM, Han F, Chen Q, Xu JR, Zhao ZD (2018) Microstructures and mechanical properties of in-situ Al3Ti/2024Al composites after solution and subsequent aging treatment. Mater Sci Eng A 724:181–21810.1016/j.msea.2018.03.089 ↗
42. Wu YN, Zhang JF, Liao HC, Wang YJ, Wu YP (2016) Effect of homogenization temperature on microstructure and conductivity of Al-Mg-Si-Ce alloy. J Mater Eng Perform 25:2720–272610.1007/s11665-016-2121-5 ↗
43. Wei HG, Xia FZ, Wang MP (2017) Effect of ingot grain refinement on the tensile properties of 2024 Al alloy sheets. Mater Sci Eng A 682:1–1110.1016/j.msea.2016.11.016 ↗
44. Akhtar M, Khajuria A, Sahu JK, Swaminathan J, Kumar R, Bedi R, Albert SK (2018) Phase transformations and numerical modelling in simulated HAZ of nanostructured P91B steel for high temperature applications. Appl Nanosci 8:1669–168510.1007/s13204-018-0854-1 ↗
45. Zhou X, Gao YM, Wang YR, Huang XY (2022) The improved strength and ductility of ZrCp/2024Al composites with a quasi-network microstructure fabricated by spark plasma sintering and T6 heat treatment. Mater Sci Eng A 841:14267510.1016/j.msea.2022.142675 ↗
46. Du R, Gao Q, Wu SS, Lü SL, Zhou X (2018) Influence of TiB2 particles on aging behavior of in-situ TiB2/Al-4.5Cu composites. Mater Sci Eng A 721:244–25010.1016/j.msea.2018.02.099 ↗
47. Hajjari E, Divandari M, Mirhabibi AR (2010) The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting. Mater Des 31:2381–238610.1016/j.matdes.2009.11.067 ↗
48. Sánchez M, Rams J, Ureña A (2010) Fabrication of aluminium composites reinforced with carbon fibres by a centrifugal infiltration process. Compos Part A 41:1605–161110.1016/j.compositesa.2010.07.014 ↗
49. Goha CS, Weib J, Leeb LC, Gupta M (2007) Properties and deformation behaviour of Mg-Y2O3 nanocomposites. Acta Mater 15:5115–512110.1016/j.actamat.2007.05.032 ↗
50. Dan CY, Chen Z, Ji G, Zhong SH, Wu Y, Brisset F, Wang HW, Ji V (2017) Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. Mater Des 130:357–36510.1016/j.matdes.2017.05.076 ↗
51. Silvain JF (2020) Synergetic effect of discontinuous carbon fibers and graphite flakes on thermo-mechanical properties of aluminum matrix composites fabricated by solid-liquid phase sintering. Met Mater Int 26:155–16710.1007/s12540-019-00324-0 ↗
52. Xu Y, Sun W, Xiong X, Liu F, Luan X (2019) Ablation characteristics of mosaic structure ZrC-SiC coatings on low-density, porous C/C composites. J Mater Sci Technol 35(12):2785–279810.1016/j.jmst.2019.08.004 ↗
53. Tian K, Zhao Y, Jiao L, Zhang S, Zhang Z, Wu X (2014) Effects of in situ generated ZrB2 nano-particles on microstructure and tensile properties of 2024Al matrix composites. J Alloy Compd 594:1–610.1016/j.jallcom.2014.01.117 ↗
54. Zhang Z, Chen DL (2006) Consideration of Orowan strengthening effect in particulate reinforced metal matrix nanocomposites: a model for predicting their yield strength. Scr Mater 54:1321–132610.1016/j.scriptamat.2005.12.017 ↗
55. Frost HJ, Ashby MF (1982) Deformation-mechanism maps. Pergamon Press, Oxford
56. Sanaty-Zadeh A (2012) Comparison between current models for the strength of particulate reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect. Mater Sci Eng A 531:112–11810.1016/j.msea.2011.10.043 ↗
57. Campbell FC (2008) Cobalt and cobalt alloys, Elements of metallurgy and engineering alloys. ASM International, Materials Park, 557–56210.31399/asm.tb.emea.9781627082518 ↗
58. Zhang Z, Chen DL (2008) Contribution of Orowan strengthening effect in particulate reinforced metal matrix nanocomposites. Mater Sci Eng A 483:148–15210.1016/j.msea.2006.10.184 ↗
59. Yang C, Zhang B, Zhao D, Li X, Zhai T, Han Q, Liu F (2017) In-situ synthesis of AlN/Mg-Al composites with high strength and high plasticity. J Alloy Compd 699:627–63210.1016/j.jallcom.2017.01.005 ↗
60. Zhou W, Yamamoto G, Fan Y, Kwon H, Hashida T, Kawasaki A (2016) In-situ characterization of interfacial shear strength in multi-walled carbon nanotube reinforced aluminum matrix composites. Carbon 106:37–4710.1016/j.carbon.2016.05.015 ↗
61. Chen B, Shen J, Ye X, Imai H, Umeda J, Takahashi M, Kondoh K (2017) Solid-state interfacial reaction and load transfer efficiency in carbon nanotubes (CNTs)—reinforced aluminum matrix composites. Carbon 114:198–20810.1016/j.carbon.2016.12.013 ↗
62. Xiong B, Wang C, Liu K, Wang Z, Xie Z, Zhang T, Li X (2021) Interfacial phase induced load transfer in short carbon fiber reinforced Nb/Nb5Si3 composites. Mater Sci Eng A 799:14015610.1016/j.msea.2020.140156 ↗
63. Joshi SP, Eberl C, Cao B, Ramesh KT, Hemker KJ (2009) On the occurrence of Portevin-Le Châtelier Instabilities in Ultrafine-grained 5083 aluminum alloys. Exp Mech 49:207–21810.1007/s11340-008-9208-3 ↗
64. Ramakrishnan N (1996) An analytical study on strengthening of particulate reinforced metal matrix composites. Acta Mater 44:69–7710.1016/1359-6454(95)00150-9 ↗