ZrC formation and the phase relations in the Si–Zr–Mg–O–C system
Source abstract
Abstract
When MgO+ZrO2 were used as a sintering aid to SiC ceramics, it was found that ZrO2 reacted with SiC and MgO to form ZrC and a magnesium silicate. This reaction may provide a new route to synthesize ZrC or prepare ZrC/SiC composites by reaction sintering using ZrO2, SiC, and MgO as starting materials. In the present work, formation process of the ZrC phase in the SiC–MgO–ZrO2 system was addressed. Subsolidus phase relations at 1550 °C of the SiC–MgO–ZrO2 system and the related SiC–SiO2–ZrC–ZrO2–MgO (Si–Zr–Mg–O–C) system were investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Ma BX, Han WB, Guo EJ (2014) Oxidation behavior of ZrC-based composites in static laboratory air up to 1300°C. Int J Refract Met Hard Mater 46:159–16710.1016/j.ijrmhm.2014.05.013 ↗
2. Wang XF, Liu JC, Hou F, Hu JD, Sun X, Zhou YC (2015) Synthesis of ZrC–SiC powders from hybrid liquid precursors with improved oxidation resistance. J Am Ceram Soc 98(1):197–20410.1111/jace.13274 ↗
3. Li F, Huang X, Zhang GJ (2015) Scalable foaming assisted synthesis of ZrC nanopowder by carbothermal reduction. Ceram Int 41:3335–333810.1016/j.ceramint.2014.10.170 ↗
4. Davoodi D, Hassanzadeh-Tabrizi SA, Emami AH, Salahshour S (2015) A low temperature mechanochemical synthesis of nanostructured ZrC powder by a magnesiothermic reaction. Ceram Int 41:8397–840110.1016/j.ceramint.2015.03.034 ↗
5. Hajalilou A, Hashim M, Kamari HM, Javadi K, Kanagesaan S, Parastegari M (2014) Synthesis of ZrC nanoparticles in the ZrO-Mg-C-Fe system through mechanically activated self-propagating high temperature synthesis. Acta Metall 27(6):1144–115110.1007/s40195-014-0152-1 ↗
6. Liu CQ, Li KZ, Li HJ, Zhang SY, Zhang YL, Hou XG (2015) Synthesis, characterization, and ceramization of a SiC-ZrC-C preceramic polymer precursor. J Membr Sci 50(7):2824–2831
7. Pizon D, Lucas R, Foucaud S, Maitre A (2011) ZrC-SiC materials from the polymer-derived ceramics route. J Am Ceram Soc 12(7):599–603
8. Cai T, Qiu WF, Liu D, Han WJ, Ye L, Zhao AJ, Zhao T (2013) Synthesis of ZrC-SiC powders by a preceramic solution route. J Am Ceram Soc 96(10):3023–302610.1111/jace.12551 ↗
9. Liu D, Qiu WF, Cai T, Sun YN, Zhao AJ, Zhao T (2014) Synthesis, characterization, and microstructure of ZrC/SiC composite ceramics via liquid precursor conversion method. J Am Ceram Soc 97(4):1242–124710.1111/jace.12876 ↗
10. Nunez-Gonzalez B, Ortiz AL, Guiberteau F, Nygren M (2012) Improvement of the spark-plasma-sintering kinetics of ZrC by high-energy ball-milling. J Membr Sci 95(2):453–456
11. Acicbe RB, Goller G (2013) Densification behavior and mechanical properties of spark plasma-sintered ZrC-TiC and ZrC-TiC-CNT composites. J Membr Sci 48(6):2388–2393
12. Licheri R, Orrù R, Musa C, Cao G (2008) Combination of SHS and SPS techniques for fabrication of fully dense ZrB2-ZrC-SiC composites. Mater Lett 62:432–43510.1016/j.matlet.2007.05.066 ↗
13. Li ZQ, Li HJ, Zhang SY, Li KZ (2012) Microstructure and ablation behaviors of integer felt reinforced C/C–SiC–ZrC composites prepared by a two-step method. Ceram Int 38:3419–342510.1016/j.ceramint.2011.12.054 ↗
14. Wu WW, Zhang GJ, Kan YM, Wang PL, Vanmeensel K, Vleugels J, Biest Omer VD (2007) Synthesis and microstructural features of ZrB2-SiC-based composites by reactive spark plasma sintering and reactive hot pressing. Scr Mater 57:317–32010.1016/j.scriptamat.2007.04.025 ↗
15. Zhang Y, Gao D, Xu CL, Song Y, Shi XB (2014) Oxidation behavior of hot pressed ZrB2-ZrC-SiC ceramic composites. Int J Appl Ceram Technol 11(1):178–18510.1111/ijac.12000 ↗
16. Kirilenko EV, Derii AI, Petrovskii VYa (2009) Dependence of the resistivity of hot-pressed Si3N4-ZrC composites on their composition. Powder Metall Met Ceram 48(9-10):560–56810.1007/s11106-010-9168-x ↗
17. Tamoghna C et al (2014) Effect of zirconium on the densification of reactively hot-pressed zirconium carbide. J Am Ceram Soc 97(10):3092–310210.1111/jace.13117 ↗
18. Nachiappan C, Rangaraj L, Divakar C, Jayaram V (2010) Synthesis and densification of monolithic zirconium carbide by reactive hot pressing. J Am Ceram Soc 93(5):1341–134610.1111/j.1551-2916.2010.03608.x ↗
19. Liang HQ, Yao XM, Zhang JX, Liu XJ, Huang ZG (2014) The effect of rare earth oxides on the pressureless liquid phase sintering of α-SiC. J Eur Ceram Soc 34:2865–287410.1016/j.jeurceramsoc.2014.03.029 ↗
20. Rodríguez-Rojas F, Ortiz AL, Borrero-López OB, Guiberteau F (2012) Effect of the sintering additive content on the protective passive oxidation behaviour of pressureless liquid-phase-sintered SiC. J Eur Ceram Soc 32:3531–353610.1016/j.jeurceramsoc.2012.05.004 ↗
21. Neher R, Herrmann M, Brandt K, Jaenicke-Roessler K, Pan Z, Fabrichnaya O, Seifer HJ (2011) Liquid phase formation in the system SiC, Al2O3, Y2O3. J Eur Ceram Soc 31:175–18110.1016/j.jeurceramsoc.2010.09.002 ↗
22. Jiang JM, Wang S, Li W, Chen ZH, Zhu YL (2014) Preparation of 3D Cf/ZrC–SiC composites by joint processes of PIP and RMI. Mater Sci Eng A 607:334–34010.1016/j.msea.2014.03.071 ↗
23. Zhao LY, Jia DC, Duan XM, Yang ZH, Zhou Y (2012) Oxidation of ZrC–30 vol% SiC composite in air from low to ultrahigh temperature. J Eur Ceram Soc 32:947–95410.1016/j.jeurceramsoc.2011.10.024 ↗
24. Song CB, Lin TS, He P, Yang WQ, Jia DC, Feng JC (2014) Microstructure evolution and its effect on the mechanical properties of the ZrC–SiC composite joint diffusion bonded with pure Ni foil. Ceram Int 40:17–2310.1016/j.ceramint.2013.04.074 ↗
25. El-Sheikh SM, Zaki ZI, Ahmed YMZ (2014) In situ synthesis of ZrC/SiC nanocomposite via carbothermic reduction of binary xerogel. J Alloys Compd 613:379–38610.1016/j.jallcom.2014.05.180 ↗
26. Du Y, Jin ZP (1991) Optimization and calculation of the ZrO2-MgO system CALPHAD. Comput Coupling Phase Diagr Thermochem 15(1):59–6810.1016/0364-5916(91)90026-G ↗
27. Negita K (1986) Effective sintering aids for silicon carbide ceramics: reactivities of silicon carbide with various additives. J Am Ceram Soc 69(12):C308–C31010.1111/j.1151-2916.1986.tb07398.x ↗
28. Lj Kljajevic B, Matovic A Rsdosavljevic-Mihajlovic, Rosic M, Boskovic S, Devecerski A (2011) Preparation of ZrO2 and ZrO2/SiC powders by carbothermal reduction of ZrSiO4. J Alloys Compd 509:2203–221510.1016/j.jallcom.2010.11.002 ↗
29. Tatli Z, Thompson DP (2007) The use of MgO-coated SiC powders as low temperature densification materials. J Eur Ceram Soc 27:1313–131710.1016/j.jeurceramsoc.2006.04.056 ↗
30. Foster D, Thompson DP (1999) The Use of MgO as a Densification Aid for α-SiC. J Eur Ceram Soc 19:2823–283110.1016/S0955-2219(99)00060-6 ↗
31. Li D, Yao XM, Chen J, Jiang F, Yang Y, Huang ZG, Liu XJ (2013) Microstructure and reaction mechanism of SiC ceramic with mullite-zircon as a new liquid-phases sintering additives system. Mater Sci Eng A 559:510–51410.1016/j.msea.2012.08.133 ↗
32. WZ Sun, LE Wu, Y Jiang, ZK Huang, JG Cheng Phase relations in the SiC-SiO2-MxOy (MxOy: MgO,Al2O3,ZrO2) systems (submitted)
33. Foster WR (1951) Contribution to the interpretation of phase diagrams by ceramists. J Am Ceram Soc 34(5):151–16010.1111/j.1151-2916.1951.tb11625.x ↗
34. Gozzi D, Montozzi M, Cignini PL (1999) Apparent oxygen solubility in refractory carbides. Solid State Ionics 123:1–1010.1016/S0167-2738(99)00085-5 ↗