Deformation behavior of consecutive workpieces in equal channel angular pressing of solid dies
Source abstract
Abstract
In this study, consecutive workpiece equal channel angular pressing (ECAP) in solid-dies, where the second workpiece is successively deformed without splitting and reassembling the die after the first workpiece processing, is employed to reduce the processing time in ECAP. The plastic deformation behavior of the two workpieces was investigated in terms of strain homogeneity, load, and defects using the finite element method (FEM). The experimental deformations of the consecutive workpiece during ECAP were compared with the FEM results, and it was found that the deformation was more heterogeneous in the second workpiece when compared with the first workpiece. The primary reason behind these findings is that the deformed geometry of the second workpiece was a back slant type and the first deformed workpiece provided back pressure to the second workpiece. Furthermore, the folding defect was less pronounced in the second workpiece because of the back slant head shape. Despite the less homogeneity in strain, the ECAP of the consecutive workpieces is an effective process for less defective materials and increases process efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Gleiter H (1989) Prog Mater Sci 33:22310.1016/0079-6425(89)90001-7 ↗
2. Valiev RZ (2004) Nature Mater 3:51110.1038/nmat1180 ↗
3. Valiev RZ, Langdon TG (2006) Prog Mater Sci 51:88110.1016/j.pmatsci.2006.02.003 ↗
4. Segal VM, Reznikov VI, Drobyshevkiy AE, Kopylov VI (1981) Russ Met 1:115
5. Zhilyaev AP, Nurislamova GV, Kim BK, Baró MD, Szpunar JA, Langdon TG (2003) Acta Mater 51:75310.1016/S1359-6454(02)00466-4 ↗
6. Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Acta Mater 47:57910.1016/S1359-6454(98)00365-6 ↗
7. Xu C, Langdon TG (2003) Scripta Mater 48:110.1016/S1359-6462(02)00354-8 ↗
8. Segal VM (2003) Mater Sci Eng A345:3610.1016/S0921-5093(02)00258-7 ↗
9. Kim HS, Seo MH, Hong SI (2000) Mater Sci Eng A291:8610.1016/S0921-5093(00)00970-9 ↗
10. Raab GI (2005) Mater Sci Eng A410–411:23010.1016/j.msea.2005.08.089 ↗
11. Prangnell PB, Harris C, Roberts CM (1997) Scripta Mater 37:98310.1016/S1359-6462(97)00192-9 ↗
12. Li S, Bourke MAM, Beyerlein IJ, Alexander DJ, Clausen B (2004) Mater Sci Eng A382:21710.1016/j.msea.2004.04.067 ↗
13. Dumoulin S, Roven HJ, Werenskiold JC, Valberg HS (2005) Mater Sci Eng A410–411:24810.1016/j.msea.2005.08.103 ↗
14. Lapovok RY (2005) J Mater Sci 40:341. doi: 10.1007/s10853-005-6088-010.1007/s10853-005-6088-0 ↗
15. Figueiredo RB, Cetlin PR, Langdon TG (2010) Metall Mater Trans 41A:77810.1007/s11661-009-0100-2 ↗
16. Kim HS, Seo MH, Hong SI (2001) J Mater Proc Technol 113:62210.1016/S0924-0136(01)00710-5 ↗
17. Estrin Y, Tóth LS, Molinari A, Bréchet Y (1998) Acta Mater 46:550910.1016/S1359-6454(98)00196-7 ↗
18. Yoon SC, Seo MH, Kim HS (2006) Scripta Mater 55:15910.1016/j.scriptamat.2006.03.046 ↗
19. Nagasekhar AV, Yoon SC, Yoo JH, Kang S-Y, Baik SC, El Aal MIA, Kim HS (2010) Mater Trans 51:97710.2320/matertrans.M2009407 ↗
20. Xu C, Xia K, Langdon TG (2009) Mater Sci Eng A527:20510.1016/j.msea.2009.07.063 ↗
21. Kim HS (2002) Mater Sci Eng A328:31710.1016/S0921-5093(01)01793-2 ↗