In-situ observation of crack opening displacement (COD) in a metastable β titanium composite
Source abstract
Abstract
The interfacial strength of β-Ti composites was increased via ageing, to investigate the effects of interfacial strength on the crack opening. Prior to crack opening displacement (COD) measurements, the number and location of fractured fibres were identified by acoustic emission and fibre probing techniques. This was later used to model the crack opening for number of tests conditions, such as different values of applied stress intensity factor, interfacial strengths and test temperatures. COD measurements were performed on bridged cracks, which were obtained by cycling the specimens under tension–tension loading. Test results have shown that crack opening is affected by both intrinsic factors such as interfacial debonding and frictional sliding stresses and extrinsic factors such as the maximum applied stress intensity factor and test temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Kaya F, Liu J, Fox KM, Bowen P (1999) In: Wu XR, Wang ZG (eds) Fatigue’ 99, Proceedings of the 7th international fatigue congress, Beijing, 1999, p 1429
2. Warrier SG, Majumdar BS (1997) Mater Sci Eng A237:25610.1016/S0921-5093(97)00423-1 ↗
3. Warrier SG, Majumdar BS, Miracle DB (1997) Acta Mater 45:496910.1016/S1359-6454(97)00179-1 ↗
4. Warrier SG, Majumdar BS (1999) Metall Mater Trans A 30:27710.1007/s11661-999-0316-1 ↗
5. Davidson DL (1992) Metall Trans 23A:86510.1007/BF02675564 ↗
6. Majumdar BS (1998) In: Mall S, Nicholas T (eds) Titanium matrix composites, mechanical behaviour. Technomic Publication, Pennsylvania, p 118
7. Kaya F, Bowen P (in press) Mater Sci Eng A, doi: 10.1016/j.msea.2007.04.09610.1016/j.msea.2007.04.096 ↗
8. Barney C (1995) PhD Thesis. The University of Birmingham, UK
9. Liu J (1999) PhD Thesis. The University of Birmingham, UK
10. Liu J, Bowen P (2002) Acta Mater 50:420510.1016/S1359-6454(02)00246-X ↗
11. Liu J, Bowen P (2001) Metall Mater Trans A34:1193
12. Fanning JC (1993) In: Eylon D, Boyer RR (eds) Ti metal21S property data. beta alloys in the 1990s. The Minerals, Metals and Materials Society, p 397
13. Bunsell AR, (1999) In: Bunsell AR, Berge MH (eds) Fine ceramic fibres. Marcel Deccer Inc., p 1
14. Kaya F (2003) PhD Thesis. The University of Birmingham, UK
15. Larsen E (1995) In: Blenkinshop PA, Evans WJ, Flower HM (eds) Titanium’95 science and technology. Proceedings of the 8th world conference on titanium, vol III. Birmingham, UK. 22–26 October 1995, p 2803
16. Materials Properties Handbook (1994) Titanium alloys. ASM International, p 58
17. Covey SJ, Lerch BA, Jayaraman N (1995) Mater Sci Eng A200:6810.1016/0921-5093(95)07007-9 ↗
18. Ghosn LJ, Kantzos P, Telesman J (1992) Int J Fract 54:34510.1007/BF00035108 ↗
19. Cox BN, Marshall DB (1991) Fatigue Fract Eng Mater Struct 14:857
20. Danchaivijit S, Shetty DK (1993) J Am Ceram Soc 76(10):249710.1111/j.1151-2916.1993.tb03972.x ↗
21. Fox KM (1994) PhD Thesis. The University of Birmingham, UK
22. Marshall DB, Cox BN, Evans AG (1985) Acta Metall 33(11):201310.1016/0001-6160(85)90124-5 ↗