Tensile strength, peel load, and static puncture resistance of laminated composites reinforced with nonwoven fabric
Source abstract
Abstract
Nonwoven fabrics were used as reinforcement to laminated composites to improve the mechanical properties and damage behaviors. The needle-punched Kevlar/LMPET nonwoven interlayer and two TPU covers were combined via thermal bonding to form the laminated composites. Tensile strength, peel load, and static puncture resistance of the laminated composites were evaluated in terms of needle punching rate and depth of the nonwoven interlayer. Results showed that tensile strength and static puncture resistance depended on the needle punching depth, primarily on the tangled fiber points. The peel load was dependent on the needle punching rate, especially on the resulting melted LMPET fibers. The laminated composites exhibited desirable tensile properties, peel load, and static puncture resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Lee Y-J, Chung C-H (2003) Study on the mechanical properties of marine FRP laminates. J Compos Mater 37(11):967–983. https://doi.org/10.1177/002199830303701100210.1177/0021998303037011002 ↗
2. Kaluza A, Kleemann S, Fröhlich T, Herrmann C, Vietor T (2017) Concurrent design and life cycle engineering in automotive lightweight component development. Proc CIRP 66:16–21. https://doi.org/10.1016/j.procir.2017.03.29310.1016/j.procir.2017.03.293 ↗
3. Mittal G, Rhee KY, Mišković-Stanković V, Hui D (2018) Reinforcements in multi-scale polymer composites: processing, properties, and applications. Compos Part B Eng 138:122–139. https://doi.org/10.1016/j.compositesb.2017.11.02810.1016/j.compositesb.2017.11.028 ↗
4. Möhring HC (2017) Composites in Production Machines. Proc CIRP 66:2–9. https://doi.org/10.1016/j.procir.2017.04.01310.1016/j.procir.2017.04.013 ↗
5. He Q, Cao S, Wang Y, Xuan S, Wang P, Gong X (2018) Impact resistance of shear thickening fluid/Kevlar composite treated with shear-stiffening gel. Compos A Appl Sci Manuf 106:82–90. https://doi.org/10.1016/j.compositesa.2017.12.01910.1016/j.compositesa.2017.12.019 ↗
6. Yao S-S, Jin F-L, Rhee KY, Hui D, Park S-J (2018) Recent advances in carbon-fiber-reinforced thermoplastic composites: a review. Compos Part B Eng 142:241–250. https://doi.org/10.1016/j.compositesb.2017.12.00710.1016/j.compositesb.2017.12.007 ↗
7. Scalici T, Fiore V, Valenza A (2018) Experimental assessment of the shield-to-salt-fog properties of basalt and glass fiber reinforced composites in cork core sandwich panels applications. Compos Part B Eng 144:29–36. https://doi.org/10.1016/j.compositesb.2018.02.02110.1016/j.compositesb.2018.02.021 ↗
8. Ilango V, Shabaridharan K, Kumar NS, Perumalraj R (2018) Tensile characteristics of sisal and polypropylene fibre non-woven materials for geo-textile applications. J Ind Text 47(7):1702–1715. https://doi.org/10.1177/152808371770848110.1177/1528083717708481 ↗
9. Lin J-H, Hsieh J-C, Huang C-H, Hsing W-H, Huang C-L, Tan H-J, Lou C-W (2017) Effects of needle punching and hot pressing on mechanical properties of composite geotextiles. J Ind Text 47(4):522–534. https://doi.org/10.1177/152808371665446710.1177/1528083716654467 ↗
10. Shi S, Sun Z, Hu X, Chen H (2014) Carbon-fiber and aluminum-honeycomb sandwich composites with and without Kevlar-fiber interfacial toughening. Compos A Appl Sci Manuf 67:102–110. https://doi.org/10.1016/j.compositesa.2014.08.01710.1016/j.compositesa.2014.08.017 ↗
11. Sun Z, Hu X, Sun S, Chen H (2013) Energy-absorption enhancement in carbon–fiber aluminum–foam sandwich structures from short aramid-fiber interfacial reinforcement. Compos Sci Technol 77:14–21. https://doi.org/10.1016/j.compscitech.2013.01.01610.1016/j.compscitech.2013.01.016 ↗
12. Yuan B, Wee EPJ, Cheong JLK, Speelman A, Long RTJ, Jiang B, Li Y, Hu X (2017) Quasi-Z-directional toughening from un-bonded non-woven veil at interface in laminar composites. Compos Commun 6:20–24. https://doi.org/10.1016/j.coco.2017.07.00710.1016/j.coco.2017.07.007 ↗
13. Huang B-Z, Hu X-Z, Liu J (2004) Modelling of inter-laminar toughening from chopped Kevlar fibers. Compos Sci Technol 64(13):2165–2175. https://doi.org/10.1016/j.compscitech.2004.03.01410.1016/j.compscitech.2004.03.014 ↗
14. Miao M (2004) An experimental study of the needled nonwoven process part II: fiber transport by barbed needles. Text Res J 74(5):394–398. https://doi.org/10.1177/00405175040740050410.1177/004051750407400504 ↗
15. Miao M, Glassey HE, Rastogi M (2004) An experimental study of the needled nonwoven process: part III: fiber damage due to needling. Text Res J 74(6):485–490. https://doi.org/10.1177/00405175040740060410.1177/004051750407400604 ↗
16. Chen J-F, Morozov EV, Shankar K (2014) Simulating progressive failure of composite laminates including in-ply and delamination damage effects. Compos A Appl Sci Manuf 61:185–200. https://doi.org/10.1016/j.compositesa.2014.02.01310.1016/j.compositesa.2014.02.013 ↗
17. Zhao L, Wang Y, Zhang J, Gong Y, Lu Z, Hu N, Xu J (2017) An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loading. Compos Part B Eng 131:196–208. https://doi.org/10.1016/j.compositesb.2017.07.07710.1016/j.compositesb.2017.07.077 ↗
18. Yu B, Khaderi SN, Deshpande VS, Fleck NA (2018) The effect of matrix shear strength on the out-of-plane compressive strength of CFRP cross-ply laminates. Int J Solids Struct. https://doi.org/10.1016/j.ijsolstr.2018.01.02310.1016/j.ijsolstr.2018.01.023 ↗
19. Zhang Z, Li B (2018) Effects of the shear lag on longitudinal strain and flexural stiffness of flanged RC structural walls. Eng Struct 156:130–144. https://doi.org/10.1016/j.engstruct.2017.11.02010.1016/j.engstruct.2017.11.020 ↗
20. Walker L, Hu X-Z (1999) Comparison of carbon fibre/epoxy composites reinforced by short aramid and carbon fibres. Scripta Mater 41(6):575–582. https://doi.org/10.1016/S1359-6462(99)00193-110.1016/S1359-6462(99)00193-1 ↗
21. Xu F, Huang D-d DuX (2018) Improving the delamination resistance of carbon fiber/epoxy composites by brushing and abrading of the woven fabrics. Constr Build Mater 158:257–263. https://doi.org/10.1016/j.conbuildmat.2017.10.01510.1016/j.conbuildmat.2017.10.015 ↗
22. McElroy M, Jackson W, Olsson R, Hellström P, Tsampas S, Pankow M (2017) Interaction of delaminations and matrix cracks in a CFRP plate, Part I: a test method for model validation. Compos A Appl Sci Manuf 103:314–326. https://doi.org/10.1016/j.compositesa.2017.09.01110.1016/j.compositesa.2017.09.011 ↗
23. Boyd SE, Bogetti TA, Staniszewski JM, Lawrence BD, Walter MS (2018) Enhanced delamination resistance of thick-section glass-epoxy composite laminates using compliant thermoplastic polyurethane interlayers. Compos Struct 189:184–191. https://doi.org/10.1016/j.compstruct.2018.01.06210.1016/j.compstruct.2018.01.062 ↗
24. Ayca G, Binnaz M (2005) Sewing needle penetration forces and elastane fiber damage during the sewing of cotton/elastane woven fabrics. Text Res J 75(8):628–633. https://doi.org/10.1177/004051750505764010.1177/0040517505057640 ↗
25. Chen X, Chen L, Zhang C, Song L, Zhang D (2016) Three-dimensional needle-punching for composites: a review. Compos A Appl Sci Manuf 85:12–30. https://doi.org/10.1016/j.compositesa.2016.03.00410.1016/j.compositesa.2016.03.004 ↗
26. Shetty Ravindra R, Rai SK (2011) Performance analysis of waste silk fabric-reinforced vinyl ester resin laminates. J Compos Mater 45(23):2475–2480. https://doi.org/10.1177/002199831140109710.1177/0021998311401097 ↗
27. Silberstein MN, Pai C-L, Rutledge GC, Boyce MC (2012) Elastic–plastic behavior of non-woven fibrous mats. J Mech Phys Solids 60(2):295–318. https://doi.org/10.1016/j.jmps.2011.10.00710.1016/j.jmps.2011.10.007 ↗
28. Russo P, Acierno D, Marletta G, Destri GL (2013) Tensile properties, thermal and morphological analysis of thermoplastic polyurethane films reinforced with multiwalled carbon nanotubes. Eur Polym J 49(10):3155–3164. https://doi.org/10.1016/j.eurpolymj.2013.07.02110.1016/j.eurpolymj.2013.07.021 ↗
29. Wang J, Shi C, Yang N, Sun H, Liu Y, Song B (2018) Strength, stiffness, and panel peeling strength of carbon fiber-reinforced composite sandwich structures with aluminum honeycomb cores for vehicle body. Compos Struct 184:1189–1196. https://doi.org/10.1016/j.compstruct.2017.10.03810.1016/j.compstruct.2017.10.038 ↗
30. Ruosi Y, Rui W, Ching-Wen L, Jia-Horng L (2015) Compressive properties of high-resilience thermal-bonding cushioning inter/intra-ply hybrid composites. J Compos Mater 49(30):3823–3835. https://doi.org/10.1177/002199831556975010.1177/0021998315569750 ↗
31. Ruosi Y, Shih-Yu H, Chen-Hung H, Chien-Teng H, Ching-Wen L, Jia-Horng L (2017) Effects of needle-punched nonwoven structure on the properties of sandwich flexible composites under static loading and low-velocity impact. Compos Mater 51(8):1045–1056. https://doi.org/10.1177/002199831665854210.1177/0021998316658542 ↗
32. Liu X-D, Sheng D-K, Gao X-M, Li T-B, Yang Y-M (2013) UV-assisted surface modification of PET fiber for adhesion improvement. Appl Surf Sci 264:61–69. https://doi.org/10.1016/j.apsusc.2012.09.10710.1016/j.apsusc.2012.09.107 ↗
33. Normala H, Mohd Rozi A, Wan Yunus Wan A, Azemi S, Mohammad Harris MY (2011) Puncture resistance of natural rubber latex unidirectional coated fabrics. J Ind Text 42(2):118–131. https://doi.org/10.1177/152808371142914410.1177/1528083711429144 ↗
34. Yan R, Wang R, Lou C-W, Lin J-H (2015) Low-velocity impact and static behaviors of high-resilience thermal-bonding inter/intra-ply hybrid composites. Compos Part B Eng 69:58–68. https://doi.org/10.1016/j.compositesb.2014.09.02110.1016/j.compositesb.2014.09.021 ↗
35. Fu S, Yu B, Tang W, Fan M, Chen F, Fu Q (2018) Mechanical properties of polypropylene composites reinforced by hydrolyzed and microfibrillated Kevlar fibers. Compos Sci Technol. https://doi.org/10.1016/j.compscitech.2018.03.02010.1016/j.compscitech.2018.03.020 ↗
36. Woo S-C, Kim T-W (2014) High-strain-rate impact in Kevlar-woven composites and fracture analysis using acoustic emission. Compos Part B Eng 60:125–136. https://doi.org/10.1016/j.compositesb.2013.12.05410.1016/j.compositesb.2013.12.054 ↗
37. McDaniel PB, Sockalingam S, Deitzel JM, Gillespie JW, Keefe M, Bogetti TA, Casem DT, Weerasooriya T (2017) The effect of fiber meso/nanostructure on the transverse compression response of ballistic fibers. Compos A Appl Sci Manuf 94:133–145. https://doi.org/10.1016/j.compositesa.2016.12.00310.1016/j.compositesa.2016.12.003 ↗