journal article·2013-10

Fabrication and mechanical properties of β-sialon–Fe x Si y –CNTs composites

Xiaolin Sun, Kangning Sun, Xiaoning Sun, Lijuan Xing, Yi Liu, Lei Qian

Journal of Materials Science· Volume 48· Issue 19
Publisher page

Abstract

Silicon nitride composites were fabricated by adding Fe3Al and carbon nanotubes and hot-pressing at a low sintering temperature of 1600 °C. The resulted composites were characterized by X-ray diffraction, Fourier-transform infrared spectrum, and field emission scanning electron microscopy. It was found that the Fe3Al could react with Si3N4 to form the series of compound of Fe x Si y , and CNTs could keep chemical stability in the system. Mechanical properties of the composites were also investigated. For Fe3Al as the additive, the relative density could reach to 93.6 % with the maximum hardness of 15.7 GPa. When the Fe3Al and CNTs were added into matrix simultaneously, the relative density reached to 92.6 %, and the maximum fracture toughness was 6.7 MPa m1/2. Finally, the toughening mechanism of Fe3Al and CNTs in sialon composites, containing crack deflection and bridging, and nanotubes pullout and bridging, were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Riley FL (2000) J Am Ceram Soc 83:24510.1111/j.1151-2916.2000.tb01182.x ↗
2. Jack KH (1976) J Mater Sci 11:1135. doi: 10.1007/BF02396649.7110.1007/BF02396649 ↗
3. Jack KH, Wilson WI (1972) Nat (Lond) Phys Sci 238:2810.1038/physci238028a0 ↗
4. Ekström T, Nygren M (1992) J Am Ceram Soc 75:25910.1111/j.1151-2916.1992.tb08175.x ↗
5. Yang JZ, Huang ZH, Fang MH, Liu YG, Huang JT, Hu JH (2009) Scripta Mater 61:63210.1016/j.scriptamat.2009.05.042 ↗
6. Sun XL, Sun KN, Du M, Wang WL, Li AM (2012) Mater Des 39:37310.1016/j.matdes.2012.02.025 ↗
7. Thostenson E, Ren TZ, Chou TW (2001) Compos Sci Technol 61:189910.1016/S0266-3538(01)00094-X ↗
8. Peigney A, Laurent Ch, Flahaut E, Rousset A (2000) Ceram Int 26:67710.1016/S0272-8842(00)00004-3 ↗
9. Iijima S (1991) Nature 354:5610.1038/354056a0 ↗
10. Corral EL, Cesarano J III, Shyam A, Lara-Curzio E, Bell N, Stuecker J, Perry N, Prima MD, Munir Z, Garay J, Barreraz EV (2008) J Am Ceram Soc 91:312910.1111/j.1551-2916.2008.02533.x ↗
11. Balázsi C, Wéber F, Kövér Z, Shen Z, Kónya Z, Kasztovszky Z, Vértesy Z, Biró LP, Kiricsi I, Arató P (2006) Curr Appl Phys 6:12410.1016/j.cap.2005.07.024 ↗
12. Thomson KE, Jiang D, Yao W, Ritchie RO, Mukherjee AK (2012) Acta Mater 60:62210.1016/j.actamat.2011.10.002 ↗
13. Ahmad I, Cao H, Chen H, Zhao H, Kennedy A, Zhu YQ (2010) J Eur Ceram Soc 30:86510.1016/j.jeurceramsoc.2009.09.032 ↗
14. Smith AC, Edress HJ, Hendry A (1992) Key Eng Mater 72–74:16510.4028/www.scientific.net/KEM.72-74.165 ↗
15. Li XM, Yin XW, Zhang LT, Cheng LF, Qi YC (2009) Mater Sci Eng A 63–69:500
16. Balázsi C, Kónya Z, Wéber F, Biró LP, Arató P (2003) Mater Sci Eng C 23:113310.1016/j.msec.2003.09.085 ↗
17. Xia Z, Riester L, Curtin WA, Li H, Sheldon BW, Liang J, Chang B, Xu JM (2004) Acta Mater 52:93110.1016/j.actamat.2003.10.050 ↗
18. Onur E, Semra K (2012) J Eur Ceram Soc 32:134310.1016/j.jeurceramsoc.2011.08.026 ↗
19. Acikbas NC, Kumar R, Kara F, Mandal H, Basu B (2011) J Eur Ceram Soc 31:62910.1016/j.jeurceramsoc.2010.10.001 ↗
20. Huang ZH, Yang JZ, Liu YG, Fang MH, Huang JT, Sun HR, Huang SF (2012) J Am Ceram Soc 95:85910.1111/j.1551-2916.2011.05051.x ↗
21. Chen WW, Cheng YB, Tuan WH (2006) J Eur Ceram Soc 26:19310.1016/j.jeurceramsoc.2004.10.014 ↗
22. Ye F, Hou ZP, Zhang HJ, Liu LM, Zhou Y (2010) Mater Sci Eng A 527:472310.1016/j.msea.2010.04.034 ↗
23. Demir A (2012) J Eur Ceram Soc 32:140510.1016/j.jeurceramsoc.2011.08.031 ↗
24. Mallik AK, Acikbas NC, Kara F, Mandal H, Basu D (2012) Ceram Int 38:575710.1016/j.ceramint.2012.04.022 ↗
25. Yi XM, Akira Y, Kazuya K, Tomohiro A (2010) Corros Sci 52:173810.1016/j.corsci.2010.02.006 ↗
26. He EQ, Yue JS, Fan L, Wang C, Wang HJ (2011) Scripta Mater 65:15510.1016/j.scriptamat.2011.03.040 ↗
27. Walker LS, Marotto VR, Rafiee MA, Koratkar N, Corral EL (2011) ACS Nano 5:318210.1021/nn200319d ↗
28. Guo ZQ, Blugan G, Kirchner R, Reece M, Graule T, Kuebler J (2007) Ceram Int 33:122310.1016/j.ceramint.2006.03.029 ↗
29. Antsiferov VN, Gilyov VG, Karmanov VI (2002) Vib Spectrosc 30:16910.1016/S0924-2031(02)00022-X ↗
30. Gilev VG (2001) Inorg Mater 37:104110.1023/A:1012383211463 ↗
31. Schwertmann U, Carlson L, Fechter H, Schweiz Z (1984) Hydrology 46:185
32. Lima FVX, Davim JP, Cairo CA, Ferreira JMF (2009) Int J Refract Met Hard Mater 27:64710.1016/j.ijrmhm.2008.10.010 ↗
33. Chen KX, Costa MEFL, Zhou H, Ferreira JMF (2002) Mater Chem Phys 75:25210.1016/S0254-0584(02)00071-8 ↗
34. Pasupuleti S, Peddetti R, Santhanam S, Jen KP, Wing ZN, Hecht M, Halloran JP (2008) Mater Sci Eng A 491:22410.1016/j.msea.2008.04.058 ↗
35. Hirosaki N, Akimune Y (1993) J Am Ceram Soc 76:189210.1111/j.1151-2916.1993.tb06670.x ↗
36. Becher PF, Sun EY, Plucknett KP, Alexander KB, Hsueh CH, Lin HT, Waters SB, Westmoreland CG (1998) J Am Ceram Soc 81:282110.1111/j.1151-2916.1998.tb02702.x ↗
37. Faber KT, Evans AG (1983) Acta Metall 31:57710.1016/0001-6160(83)90047-0 ↗
38. Yang JZ, Huang ZH, Hu XZ, Fang MH, Liu YG, Huang JT (2011) Mater Sci Eng A 528:219610.1016/j.msea.2010.11.071 ↗
39. Balázsi C, Sedlácčková K, Czigány Z (2008) Compos Sci Technol 68:159610.1016/j.compscitech.2007.11.009 ↗
40. Tapasztó O, Tapasztó L, Markó M, Kern F, Gadow R, Balázsi C (2011) Chem Phys Lett 511:34010.1016/j.cplett.2011.06.047 ↗